|
| 1 | Supply and fixinterlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm)to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm. Aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level adjusters and screws etc.complete all as specified and as directed. |
| 2 | Matrial and labour for 12 mm thick Gypsum board/tiles for insulation and accoustic purposes, 60cmx60cm in size , fixed with nails to timber frame work or with staples on snap grid in ceiling complete all as specified and as directed. |
| 3 | Supply and fixpowder coated aluminium (minimum thickness of powde coating 50 micron) for shutters of doors, windows,partition & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of fittings ,EPD M rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete all as specified and as directed. |
| 4 | Supply and fix 12 mm thick prelaminated particle board (Grade I Type II, IS: 12823) conforming to IS: 3087-1985, with decorative laminate on both sides, fixed in aluminum partition framesand dooretc. complete all as specified and as directed. |
| 5 | Supply and fix 5 mm thick clear/frosted float glass panes in aluminum door/partition shutters/frames with EPDM rubber/neoprene gasket, aluminum snap beading, and necessary screws, complete all as specified and as directed.(cost of aluminum sectionspaid separately) |
| 6 | Supply and fixfor frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed. |
| 7 | Matrial and labourfor preparation of new steel and iron surfaces of any description over 10cms width or girth & applying 2 coats of synthetic enamel paint over one coat of red oxide primecomplete all as specified and directed. |
| 8 | Supply and fixfordouble action floor spring hydraulically regulated madeup of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 9 | Supply and fixfordoor closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 10 | Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one wire gauzed shutters for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos glass shutters including 4mm thick coloured glass and aluminium section weight n.less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed. |
| 11 | Matrial and labourfor surface point wiringwith two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan/Ex fan point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc complete all as specified and as directed. |
| 12 | Description all as per item No 11above but forone three pin 5 Ampsocket outlet point with cables 1.5 sqmm size on independent bord complete |
| 13 | Description all as per item No 11 above but for one three pin 5 Ampsocket outlet point with cables 1.5 sqmm size on same bord complete |
| 14 | Description all as per item No 11 above butFRLSH copper stranded cable of size 2.5 sq mmfor 3/6 pin socket outlet 15 amp on oneindependent board. alongwith all fitting and accessoriescomplete |
| 15 | Matrial and labour forsub main wiringwith two single core PVC insulatedmulti stranded FRLSH Copper conductor cable of size 2 X 4.0 sqmmdrawn through in and including PVC cashing caping with all accesories and one single core green colourFRLSH Copper conductor cable of size 1x 4 sqmm as earth wire and connected to earth dollyand making good to disturbed surfaces complete all as specified and as directed.NOTE :- Two run of cable with one run of earth wire and one run of casing capping will be measured as one unit (RM) |
| 16 | Matrial and labour for surface sub main wiringwith four single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2X 2.5.0 sqmm (Nominal area) drawn through in and including PVC cashing caping suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1x 2.5 sqmm as earth lead and connected to earth dollyincl dismentling taking down old unserviceable wiring and making good to disturbed surfacescomplete all as specified and as directed.NOTE :- (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length. |
| 17 | Supply and fix 5 Amp switch Piano flush typesingle pole one waycomplete all as specified and as directed. |
| 18 | Supply and fixsocket outlet flush type 6 amps, 5 pin, 230vcomplete all as specified and as directed. |
| 19 | Supply and fixswitch socket indipendent boadflush type 6 amps, 5 pin, 230v complete all as specified and as directed. |
| 20 | Supply and fix switch socket combination multipurpose 2-in-1 flush type 3 pin 6 amp and 16 Amp. 230v complete all as specified and as directed. |
| 21 | Supply and fixceiling rose surface Bakelite three terminal incl dismentling taking down unsv one complete all as specified and as directed. |
| 22 | Supply and fixsheetmetal Enclosure SPN 08 way (MCB DB) Double door, 240 Volts AC complete all as specified and as directed. |
| 23 | Supply and fixvertical MCB distribution board, as MCB TPN incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way incl dismentling taking down unsv one complete all as specified and as directed. |
| 24 | Supply and fix MCB TPN40 to 100 Amps, 415 volt 10 KA complete all as specified and as directed. |
| 25 | Supply and fix MCB, Single Pole, 5 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve complete all as specified and as directed. |
| 26 | Supply and fix MCB, Single Pole & Neutral , 5 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curvecomplete all as specified and as directed. |
| 27 | Supply and fixLED Light batten 36 watt, 4 feetAC sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rosecomplete all as specified and as directed. |
| 28 | Supply and fixing LED Recess mounting 2ft X 2ft 1x 36 watt smat slim edge colour temperature, CCT controllable 2x2 LED lighting with remote control with dimming and CCT change option from 2700K to 6500K. housing made from powder coated, CRCA sheet, opaque diffuser for glare free and optimum light with complete accessories.complete all as specified and as directed. |
| 29 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and as directed.NOTE :- Old UNSV ceiling fan deposit to MES store |
| 30 | Matrial and labourfor Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.complete all as specified and as directed. |
