|
| 1 | Providing pathway using laterite stone of size 40x20x15 cm in Lime mortar 1:2 including necessary pointing the stone joints in same mortar with suitable colour oxides including curing, as per the standard specifications and as directed etc. complete. |
| 2 | Construction of laterite stone Masonry Around Trees in Lime mortar 1:2 using laterite stones of size 40x20x15cm including necessary pointing the stone joints in same mortar with suitable colour oxides including curing, as per the standard specifications and as directed etc, complete |
| 3 | Providing MS Grill covering to open well using Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 4 | Supplying and fixing 200mm Aluminium Aldrop |
| 5 | Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete: 75x47x1.70 mm |
| 6 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete |
| 7 | Finishing the well cover with with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work |
| 8 | Earth work in excavation for Portable Office Cabin by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 Cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 10 | Coursed rubble masonry (first sort) with hard stone in foundation and plinth with: Cement mortar 1:6 (1 cement: 6 coarse sand) |
| 11 | Reinforced cement concrete work at plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement for portable office Cabin 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources |
| 12 | Steel reinforcement for portable office cabin plinth beam R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars |
| 13 | Centering and shuttering for portable office cabin including strutting, propping etc. |
| 14 | Excavating, supplying, stacking and filling of local earth for portable office Cabin (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. |
| 15 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20% per litre |
| 16 | 18 mm cement plaster for Portable office Cabin in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge |
| 17 | Finishing exterior walls ofPortable office cabin with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 18 | Providing and installing portable container office room of size 10ft x 10 ft, fabricated with prefabricated steel structure and insulated wall panels, complete with flooring, door, window, electrical fittings, and necessary accessories, including transportation, placement, and installation at site, all complete as per the direction of site incharge. |
| 19 | Installation of 18w/18Ah LiFePo4/ 12.8v Luminary Solar Light with 5m GI Pole with MMS/Luminary Arm with 80wp Solar Module including LED luminaires, batteries, panels, poles/structures, controllers, cables, hardware including Installation & Material Charges Complete as per thedirection of site incharge |
| 20 | Providing Granite Stone Benches of 1.8m Length, 0.5m width, 0.12m thickness, 650 mm Leg Height, 500 mm Width as per the provided drawings including Installation & Material Charges Complete as per the direction of site incharge |
