|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 5 | 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in foundations and plinth in : |
| 7 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete. |
| 10 | Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. |
| 11 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 12 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 13 | 40 mm thick with 20 mm nominal size stone aggregate |
| 14 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 15 | (i)Single socketed pipes,75 mm diameter |
| 16 | (ii)Single socketed pipes, 110 mm diameter |
| 17 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 18 | Single tee with door 110x110x110 mm |
| 19 | Single tee without door 75x75x75 mm |
| 20 | Single tee without door 110x110x110 mm |
| 21 | Bend 87.5°75 mm bend |
| 22 | Bend 87.5°110 mm bend |
| 23 | Shoe (Plain) 110 mm Shoe |
| 24 | Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) : |
| 25 | Raised and cut pointing |
| 26 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : |
| 27 | Old work (one or more coats applied @ 0.83 ltr/10 sqm). |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 29 | Two or more coats on new work. |
| 30 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 31 | Old work (one or more coats) |
| 32 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 33 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 34 | White washing with lime to give an even shade : |
| 35 | Old work (two or more coats) . |
| 36 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 37 | With cement mortar 1:4 (1cement: 4 coarse sand |
| 38 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 39 | Float glass panes of nominal thickness 5 mm(weight not less than 12.5kg/sqm) |
| 40 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 41 | 75 to 80 mm dia pipe. |
| 42 | 100 mm dia pipe |
| 43 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 44 | Orissa pattern W.C Pan of size 580x440 mm |
| 45 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. |
| 46 | Internal Work- Exposed on wall |
| 47 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 48 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in-charge. |
| 49 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 50 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 51 | 10 litre capacity - White |
| 52 | Providing and fixing M.S. stays and clamps for PVC/sand cast iron/centrifugally cast (spun) iron pipes of diameter : |
| 53 | 100 mm |
| 54 | 75 mm |
| 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 56 | 20 mm nominal outer dia. Pipes. |
| 57 | 25 mm nominal outer dia .Pipes. |
| 58 | 40 mm nominal outer dia. Pipes. |
| 59 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 60 | Grading roof for water proofing treatment with |
| 61 | Cement mortar 1:4 (1cement : 4 coarse sand) |
| 62 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 63 | 25 mm average thickness |
| 64 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 65 | 25 mm average thickness in 2 layers. |
| 66 | Providing and laying cement slurry and URP-301 waterproofing cemical with ratio 1:1.5 ( 1 URP-301 : 1.5 cement ) usingcemical using @350 ml/Sqm and applying by brush including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: |
| 67 | Cleaning of cholked Manhole to Manhole sewer linescomplete by roddingetc. and cleaning all rubbish from the line and its disposal to an approved municipal dumping ground all complete as per the directions of Engineer-in-Charge. |
| 68 | Cleaning of cholked sewer manhole including removal of rubbish,garbage and its disposal to an approved municipal dumping ground all complete as per the directions of Engineer-in-Charge. |
| 69 | Cleaning of floor trap/P-trap/gully trap/rain water pipe/water closet/vertical sewage stacks ensuring free flow of sewage all complete as per the directions of Engineer-in-Charge. |
| 70 | Repairs to existing doors/windows/cupboard shutters (steel/wood ) by cutting,weldingetc. wherever required with or without dismantling and including fittings i.e. butt hinges, M.S. window handle etc. all complete as per the directions of Engineer-in-Charge. |
| 71 | Engaging helper for attending day to day maintenance jobs for /carpentry & all other works related to day to day maintenance.( One job will be defined/ consists execution of allitems for the working days as & when required on call basis). Including T&P as required for attending the work, shall be arranged by the contractor and nothing extra shall be paid separately.The material required for attending the complaints shall be arranged by the contractor at site and paid under sub head of \"supply of material \" of the agreement. |
| 72 | Engaging sewer man for all type works related drainage /sanitry works i.e. removing of choking of sewer lines , horizontal andvertical SCI pipe line , floor trapes, W.C. trape etc. ( Acid, bamboo, cleaning rod ,ladder, rope will be provided by the agency .) |
| 73 | Credit of materials / items obtained from dismantling being unserviceable. |
| 74 | PVC Bib cock,stop cock,ball cock, cistern, CPVC pipe, PVC tank and similar items. |
| 75 | MS fittings for doors & windows like SDB, TB, Handle, Hinges, G.I pipe and all similar items |
