|
| 1 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour Red/Blue etc. having tensile strength of 550 Mpa as in roof covering/claddingto wall, fixed with self tapping screws, including dismantling of old existing asbestos/steel sheet complete all as specified and directed. |
| 2 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour red/blue etc. having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , including dismantling of old existing asbestos/steel sheet complete all as specified and directed. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 4 | S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections)including distance pieces, cleats etc. of grade Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed. |
| 5 | S&F of Joist, channel, angle or tee sections, fixed independently, without connecting plates etc.(cut to ordinary length i.e., within 20 mm of the length indicated) Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed. |
| 6 | M&L for Preparation of New steel surface of any description over 10 cm width or girth, not otherwise specified and applying two coats of synthetic enamel paint over red oxide primer complete all as specified and directed. |
| 7 | M&L for Preparation of Old steel surface of any description over 10 cm width or girth, not otherwise specified and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 8 | Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 9 | M&L for Old size Brickwork with Cement mortarwith fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 10 | Dismantling of Old frame of Aluminium or any pattern old frame/grid ,ceiling boards and removing from site complete all as specified and directed. |
| 11 | S&F Anodised aluminium snap grid of size 605mmX605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 12 | Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 13 | Demolition of Cement Concrete (unreinforced) in Ground floor and pavings n exc 15cm thickness( Below or Above Ground level) complete all as specified and directed. |
| 14 | M&L for 75mm thick Hardcore of Broken stone of bouldersof gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 15 | M&L for 75mm thick Cement Concrete, type C-2, 1:4:8 (40mm gradedaggregate) complete all as specified and directed. |
| 16 | M&L non skid coloured designer ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with Epoxy to match with and including 15mm thick screed bed in CM (1:6) including dismantling of old existing tiles compete all as specified and directed. |
| 17 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. over and incl 15 mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of old existing tiles compete all as specified and directed. |
| 18 | Description all as per item No 17.00 above but on skirting over with and including 10mm thick backing coat in CM 1:4 including dismantling of old existing tiles compete all as specified and directed. |
| 19 | M&Lglazed ceramic coloured, designer & pattern (dark & light shade combination) tilesin450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed with Epoxyto match over with and including 10mm thick backing coat in CM 1:4 and including dismantling of old existing tiles compete all as specified and directed. |
| 20 | Taking down Cement plaster of any description upto roof on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 21 | Rendering 10mm thick Cement plaster 1:6 on fair faces of brick work or concrete surfaces, trowelled to even and smooth finish without using extra cement complete all as specified and directed. |
| 22 | M&L for Preparation of New plastered surface of wall and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work complete all as specified and directed. |
| 23 | Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces, trowelled to even and smooth finish w/o using extra cement complete all as specified and directed. |
| 24 | M&L for Preparation of New plastered surface of wall and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 25 | S&F of Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, wood grain printed PVC sheet used instead of plain colour sheet including taking down of existing wall panelling complete all as specified and directed. |
| 26 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 27 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed. |
| 28 | M&L for 20mm thick granite stone slabs over and including 15 mm thick screed layer in CM 1:4,laid and jointed with grey cement slurry mixed with pigment to match the shade of stone including rubbing & polishing complete all as specified and directed. |
| 29 | M&L for Machine cut kota stone slab flooring 20-25mm thick of size not less than 0.30 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. Note : Single piece tiles will be placed on the surface of stair case tread area. |
| 30 | M&L for Kota stone slab 20mm thick in riser of bricks steps & riser of staircase, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10mm thick CM (1:3) to receive Kota Stone complete all as specified and directed. Note : Single piece tiles will be placed on the surface of stair case riser area. |
| 31 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver interlocking block of M-35 grade with grey cement and no pigment approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping, including 50mm thick sand cushioning complete all as specified and directed. |
| 32 | Taking down chowkhats or frame n exc 1.50 Sqm each with shutters(W/out taking off shutters from the frames) complete all as specified and directed. |
| 33 | Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters(W/out taking off shutters from the frames) complete all as specified and directed. |
| 34 | S&F Powder coated Anodised aluminium frame for doors, aluminium three track sliding windows and ventilators(is a combination of three track panels having two tracks of glass pane shutters and one track for wire mesh/aluminium grill to slide back and forth)with one or more rebates including joining cleats and rubbers as required for fixing etc. complete all as specified and directed. |
| 35 | S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, tower bolt 2 Nos in each door, 3 nos x hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.NOTE: Glass panes and wire cloth shallmeasured separately and Rubber beading will not be weighed and not to be paid separately. |
| 36 | S&F Powder coated Anodised aluminium sliding windows & ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.Note :(i) Glass panes and wire cloth shall be measured & paid separately. (ii) Rubber beading will not be weighed and not to be paid separately. |
| 37 | S&F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5sq. m in each pane complete all as specified and directed. |
| 38 | S&F sheet glass 4.8 mm thick ordinary quality in squares n exc 0.5 sq m each pane complete all as specified and directed. |
| 39 | S&F of Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane 3 mm thick complete all as specified and directed. |
| 40 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 41 | S & F Neoprene/EPDM rubber gasket/beading for aluminium door, windows and ventilators complete all as specified and directed. |
| 42 | S&F Door closer hydraulically regulated of Aluminium (extruded section body), designation No 2, universal type, suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60 Kgs complete all as specified and directed. |
| 43 | Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 44 | S&F powder coated of any colour aluminium deco grill of 4 mm dia (powder coating not less than 50 micron)at site complete all as specified and directed. |
| 45 | S&F Floor door stopper of aluminium alloy body 150mm long with rubber shoes complete all as specified and directed. |
| 46 | S&F of Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm complete all as specified and directed. |
| 47 | S&F of Aluminium Mortice lock,vertical type of2 levers of size 100 mm complete all as specified and directed. |
| 48 | M&L for 50 mm thick (1:3:6) Type-C-2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed. |
| 49 | S&F superior qualitySSCurtain rod, 20mm diawith and includingSS bracket 2 Nos for each opening andfancy type SS side knob of required shape and size 2 Nos of each opening as approved by Engr- in charge and complete all as specified and directed. |
| 50 | S&F in repair vitreous china one piece WC with 10 ltrs capacity flushing cistern floor mounting frame, installation kit, drain pipe connection set, including necessary cutting to wall / floor making good complete all as specified and directed. |
| 51 | S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size (P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc completeincluding provision of cement concrete bedding & making good to floor including taking out old one complete all as specified and directed. |
| 52 | S&F in repairs 10 Litre capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed. |
| 53 | S&F Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white excluding taps, and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, PTMT waste coupling of 32 mm dia (half or full threaded )(Min wt 45 gms /40 mm -60 gms) & waste pipe as suitable complete all as specified and directed. |
| 54 | S&F in repair CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 55 | S&F in repair brass chromium plated over head shower rose fitted to steel pipe or union complete all as specified and directed. |
| 56 | S&F in repair Health Faucet with hose & hook complete all as specified and directed. |
| 57 | S&F in repair Towel Ring Round with Round Flange complete all as specified and directed. |
| 58 | S&F in repair corner glass shelf 300mm (with brass brackets)along with CP railing complete all as specified and directed. |
| 59 | S&F in repair for CP toilet roll holder fixed to wall with chromium plated brass screw completely all as specified and directed. |
| 60 | S & F in repair brass chromium plated tubular Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. |
| 61 | S&F in repair PVC connections in repair 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 62 | S&F in repair kitchen sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 63 | S&F Triand Single Lever Hot and Cold Mixture Tap for Kitchen Faucets Water tap Modern Kitchen taps Pull out Sprayer Kitchen Mixer Sink faucets (modern Black Matte)complete all as specified and directed at site. |
| 64 | Dismantling water tanks, open or closed, in position and removing to store of capacity exc 500 and n.exc1000 litre complete all as specified and directed. |
| 65 | S&F Rotational moulded polyethylene water storage Tank of capacity 1000 litre (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 66 | S&F Rotational moulded polyethylene water storage Tank of capacity 500 litre (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 67 | S&F for Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball, screwed for iron pipe or brass ferrule 20mm bore complete all as specified and directed. |
| 68 | S&F 20mm bore dia nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms)fixed complete all as specified and directed. |
| 69 | S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete all as specified and directed. |
| 70 | Taking up or down 15/20mm bore steel / composite / CPVC tubing and connection from any position concealed / exposedincluding cleaning for refixing or removal to store complete all as specified and directed. |
| 71 | Supply & Laying of CPVC pipe, SDR 11, 16mm Nominal dia & fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 72 | S&F Brass Elbow forspecial fitting of16 mm Nominal bore CPVC pipe complete all as specified and directed. |
| 73 | S&F Brass Tee forspecial fitting of16 mm Nominal bore CPVC pipe complete all as specified and directed. |
| 74 | Supply & Laying of CPVC pipe, SDR 11, 20mm Nominal dia & fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 75 | S&F Brass Elbow forspecial fitting of20 mm Nominal bore CPVC pipe complete all as specified and directed. |
| 76 | S&F Brass Tee for special fitting of20 mm Nominal bore CPVC pipe complete all as specified and directed. |
| 77 | S&F Male Brass threaded Adaptor Tee forspecial fitting of20 mm bore CPVC pipe complete all as specified and directed. |
| 78 | S&F in repair Wall Mixer 3-in-1 System with 115 mm Bend Pipe & Aerator complete all as specified and directed. |
| 79 | S&F CP Central Hole Basin Mixer with Popup waste with 450 mm long Braided Hoses complete all as specified and directed. |
| 80 | S&F in repair 15 mm bib tap (fancy type), cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 81 | S&F in repair 15 mm bib two way tap (fancy type) with wall flange, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 82 | S&F in repair 15 mm dia Stop valves / angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed. |
| 83 | S&FSS, premium type, peg set 6. heavy weight complete all as specified and directed. |
| 84 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 85 | S&F in repair single/multi PVC (SWR) floor trap 75mm dia, plain with grating including joining to waste pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate complete all as specified and directed. |
| 86 | Dismantling of cast iron pipes any size of bore as in soil waste or vent pipe including removal of cement joints fixed to wall or laid in floor complete all as specified and directed. |
| 87 | S&F110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. |
| 88 | S&F75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clampscomplete all as specified and directed. |
| 89 | S&F 110 mm PVC (SWR) access door bends any radiuscomplete all as specified and directed. |
| 90 | S&F 75 mm PVC (SWR) access door bends any radiuscomplete all as specified and directed. |
| 91 | S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 92 | S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 93 | S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed. |
| 94 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc. 30 cm high with synthetic enamel paint as required for marking of building numbers all as specified and directed. |
| 95 | Providing cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 96 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 97 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) add for fair finished surfaces complete all as specified and directed. |
| 98 | M&L RCC M-20 (Nominal Mix) in slabs supported on walls, beams and columns complete all as specified and directed. |
| 99 | S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 100 | S&F TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 101 | Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed. |
| 102 | Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 103 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed. |
| 104 | M&L for PCC 1:4:8 type D2 (40 mm graded aggregate ) in foundations, filling and mass concrete complete complete all as specified and directed. |
