|
| 1 | Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets |
| 2 | Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work |
| 3 | S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side withdecorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in Ceilling complete all as specified and directed by Engr-in-Charge. |
| 4 | S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side withdecorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls all as specified and directed by Engr-in chrage. |
| 5 | M & L second class soft wood plain fillets. exc. 13 & n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads. |
| 6 | All as per item No 5 above but exc 3 & n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one edge or face as in bedding |
| 7 | S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified. and directed by Engr-in-Charge. |
| 8 | Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each(without taking off shutters from the frames) complete all as specified and directed by Engr-in-charge. |
| 9 | All as per item 8 above heer-in-before but n.exc 1.5 Sqm(without taking off shutters from the frames) complete all as specified and directed by Engr-in-charge. |
| 10 | M&L 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engr-in-charge. |
| 11 | M&L 2nd class softwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats for doors complete all as specified and directed by Engr-in-charge. |
| 12 | All as per item 11 above heer-in-before but 30mm thickcomplete all as specified and directed by Engr-in-charge. |
| 13 | All as per item 11 heer-in-before butdivided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, all as specified and directed by Engr-in-charge. |
| 14 | M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats ofSynthetic enamel (ordinary tint)complete all as specified and directed by Engr-in-charge |
| 15 | S&F Butt hinges 100mm, medium weight, cold rolled mild steel complete all as specified and directed by Engr-in-charge |
| 16 | S&F Butt hinges 75 mm, medium weight, cold rolled mild steel complete all as specified and directed by Engr-in-charge |
| 17 | S&F extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed by Engr-in-charge. |
| 18 | S&F extruded aluminium alloy handles, fabricated type, anodised 100mm long complete all as specified and directed by Engr-in-charge. |
| 19 | S&F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and directed by Engr-in-charge. |
| 20 | S&F Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified complete all as specified and directed by Engr-in-charge.. |
| 21 | S&F Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (ISI marked), complete all as specified complete all as specified and directed by Engr-in-charge.. |
| 22 | M&L for preparation of new wood surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats ofSynthetic enamel (ordinary tint) over a coat of pink primer complete all as specified and directed by Engr-in-charge. |
| 23 | M&L for preparation of old painted wooden surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats ofSynthetic enamel (ordinary tint)complete all as specified and directed by Engr-in-charge |
| 24 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in charge. |
| 25 | S & F 3mm th sheet glass, ordinary quality and glazing with wooden beading in squares n exc 0.5 sq. m in each pane all as specified and directed by Engr-in-charge. |
| 26 | S & F 5.5 mm th sheet glass, ordinary quality and glazing with wooden beading in squaresexc 0.5 sq. m in each pane all as specified and directed by Engr-in-charge. |
| 27 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in charge. |
| 28 | M&L Non - skid Ceramic coloured tiles tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,, in floors etc over Screed bed or bedding layer of mortar 15 mm thick in CM 1 : 4, over and including 25 mm thick under layer of PCC 1 : 2 : 4 type B-1, 1 : 2 : 4 (20mm graded crushed stone aggregate) to bring the work in proper levelling set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-charge. |
| 29 | M&L glazed ceramic tile \" coloured\" 450mmx 350mm x 7mm/450x350x7mmas in verticle surface such as skirting /dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and incl 10mm thick bedding layer in cement mortar 1:4on concrete block wall surface complete all as specified. |
| 30 | Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 31 | M&L for 15mm thick cement plaster in CM 1:4 on bricks wall on concrete surfaces finishing the surfaces even and smooth without using extra cement all as specified. |
| 32 | M&L for preparation ofnewly plastered or unplastered surfaces of wall and applying two coats ofcement base paint after Priming plasteredwith alkaliresistant priming paint complete all as specified and directed. |
| 33 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 34 | S & F Galvanised, corrugated mild steel sheeting0.63 mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 as in roof covering/ cladding to wall, fixed with self tapping screws as specified |
| 35 | All as per item 34 heer-in-before butexcept sheeting (any Thickness)complete all as specified and directed by Engr-in-charge. |
| 36 | Supply & fix 3 mm thick translucent white acrylic plastic sheet as in roof covering /cladding to wall, fixed with self tapping screws all as specified. |
| 37 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 38 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy frming (beams, tee, angle, channel or flat sections) including distance piece, cleat etc Fe 410-W (Gde-E-250) quality \"A\" all as specified and directed by Engineer-in-charge. |
| 39 | M&L for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc. of any description, over 10cm in width or girth,not otherwise described and applying two coats ofSynthetic enamel (ordinary tint) paing over a coat of red oxidecomplete all as specified and directed by Engr-in-charge |
| 40 | Demolition ofprecast concrete block wallingmasonry, built in cement mortar |
| 41 | M&L for Pre-cast cement concrete block masonry in cement concrete 1:3:6 type C1(using 20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:4 complete all as specified. |
| 42 | S&F in repair 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. |
| 43 | S&F in repair 15mm Bib taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 44 | S&F in repair for 15mm PVC connections of 600mm long with PTMT nuts complete all as specified. |
| 45 | S&F in repair 15mm dia Angle cock/Stop valves, cast copper alloy,screwed down, high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 46 | S&F in repair 20mm dia Angle cock/Stop valves, cast copper alloy,screwed down, high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 47 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified. |
| 48 | S&F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 49 | S&F in repair Vitreous China wash basin, white, flat back,size 550x400mm ovel type/round/anyshape including brackets and pedestal complete in all respect as specified. |
| 50 | S&F in repair PVC valveless 10 ltr cap, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. |
| 51 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 52 | S&F in repair Vitreous china squatting pan \"Orissa pattern\" size 580x440 mm white, with integral foot rests including provision of lime concrete bedding (excluding flushing cistern and flush pipe) complete all as specified & directedby Engr -in-charge. |
| 53 | Taking down or up steel tubing and connections incl cleaning for refixing or removal to store for 20 mm dia bore. |
| 54 | Taking down or up steel tubing and connections incl cleaning for refixing or removal to store for 25 mm dia bore. |
| 55 | S&F for 20mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc. |
| 56 | S&F for 25mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc. |
| 57 | Dismantling broken water tank of cap exc 500ltr but n exc 1000 ltr |
| 58 | S&F for 1000 ltr cap Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 59 | S&F in repairs 25 mm ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 60 | S&F 25mm Nipple suitable for HDPE water tank (Minimum weight 20mm-45 gms) |
| 61 | M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 62 | M&L for 125/110mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 63 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for |
| 64 | Use & waste form work rough finished surfaces to soffits of suspended slabs, such as roof slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified and directed by Engr-in-Charge. |
| 65 | RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and directed by Engr-in-Charge. |
| 66 | Supply and fixing mild steel TMT bars 10 mm dia and over,cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed. |
| 67 | Demolition and breaking up drain 100/75mm diapipes (Salt glazed ware, AC, PVC or Reinforced concrete) set in cement mortar complete all as specified. and directed. |
| 68 | M&L PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 75mm bore pipe complete all as specified and directed by Engr-in-charge. |
| 69 | M&L PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe complete all as specified and directed by Engr-in-charge. |
| 70 | DemolItion of brickwork or stone/boulder masonry, built in cement mortor including all quins, arches pillars, etc, but excluding ashlar facings dressed stonework and precast concrete articles. |
| 71 | M & L for cement concrete type D-2 1:4:8 (using 40mm aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 72 | M&L for cement concrete Type B2 1:2:6 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed. |
| 73 | Stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, bulit in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge. |
| 74 | Stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, laid dry, complete all as specified and directed by Engr-in-Charge. |
| 75 | M & L Concrete bed to drain pipes 110mm including packing under, and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed by Engr-in-charge. |
| 76 | M & L Concrete bed to drain pipes 75mm including packing under, and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed by Engr-in-charge. |
| 77 | Taking down carefully aluminium/Copper point wiring light, fan socket or power complete fitting such as switches, ceiling rose, fan regulator, socket including light fitting etc complete with /PVC /MS conduit and T/W battern / casing caping and all as specified and as directed by Engineer-in-Charge. |
| 78 | Taking out old unsv underground cable of any size/make/ type etc from excavted tranches/ on pole passing through pipes etc from different locations complete all as specified and directed by the engr in charge. |
| 79 | Taking out old unsv SUBMAIN wiring/service cable of any size/make/ type etc from excavted tranches/ on pole passing through pipes etc from different locations complete all as specified and directed by the engr in charge. |
| 80 | M&L for Wiring for circuit/submain wiring alongwith earth wire with the 2x6.0 sq. mm + 1x6.0 sq. mm earth wire of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required in PVC Conduit all as specified and directed by Engineer in Charge. |
| 81 | Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminimum conductor of size 16 Sq mm twin core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, flat or circular all as specified and directed by Engineer-in-Charge . |
| 82 | Supply, laying, testing and commissioning LT Cable XLPE insulated, galvanised steel strip armoured,1100 volts grade, multistranded aluminium conductor cable of cross sectional area 25 sqmm; 3.5 core conforming to IS:7098 part-I with latest amendments upto date and making cable connections by providing suitable aluminium lugs with proper crimping and steel glands and laid in trenches / ducts / floors / roofs or through pipes with saddles and fixing screws etc complete all as specified and directed . |
| 83 | M&Lin repair for point wiring with PVC FRLS insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed by Engineer-in-Charge for :-One light point/one fan point controlled by one switch |
| 84 | All as per item No 83 above but for one 3 pin 5 amps socket outlet independent with cables 2.5 sqmm size |
| 85 | All as per item No 83 above but for one 3 pin 5 Amp socket outlet on same board. |
| 86 | All same as per item No 84 above but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable. |
| 87 | S&F Socket 2 in 1, 5 pin 5 Amp flush type complete all as specified and directed by Engr In Charge. |
| 88 | S&F Switch piano flush type 5 Amp, single pole, one way complete all as specified and directed by Engr in Charge. |
| 89 | S&fSwitch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed by Engr in Charge . |
| 90 | S&F Switch Socket Combination 2 in 1, 3 pin, 15/16 amp flush type Universal complete all as specified and directed by Engr in Charge . |
| 91 | M&Lfor ceiling rose surface Bakelite 65x50mm two to three terminal complete all as specified and as directed by Engr-in-Charge. |
| 92 | S & FLED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed by Engr in Charge. |
| 93 | S&Fbasic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 10 watt, 2 feet long,with all accessories complete all as per specified and as directed by Engr-in-Charge.(Havells Cat Pt No. - LHEXACP7IN1W010 or equivalent in Philips/Crompton) |
| 94 | S&F basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long,with all accessories complete all as per specified and as directed by Engr-in-Charge.(Havells Cat Pt No. - LHEXAXPNIN1W020 or equivalent in Philips/Crompton) |
| 95 | S&Fsheet metal powder coated versatile Double door TPN distribution board,6 way suitable for MCB\"s fitted with copper bus bar rated 200 amps, neutrallink , earth bar and din rail suitable for use on 240 Volt, 50Hz with all accessories complete all as per specified and as directed by Engr-in-Charge.. |
| 96 | S&Fsheet metal powder coated versatile Double door SPN distribution board,8 way suitable for MCB\"s fitted with copper bus bar rated 200 amps, neutrallink , earth bar and din rail suitable for use on 240 Volt, 50Hz with all accessories complete all as per specified and as directed by Engr-in-Charge.. |
| 97 | S&Fsheet metal powder coated versatile Double door SPN distribution board,4 way suitable for MCB\"s fitted with copper bus bar rated 200 amps, neutrallink , earth bar and din rail suitable for use on 240 Volt, 50Hz with all accessories complete all as per specified and as directed by Engr-in-Charge.. |
| 98 | M&L for MCB TPN 63 Amp, 240V with 10KA breaking capacity of \"C\" series in distribution boardswith all accessories complete all as per specified and as directed by Engr-in-Charge. |
| 99 | M&L for MCB SPN 63 Amp, 240V with 10KA breaking capacity of \"C\" series in distribution boardswith all accessories complete all as per specified and as directed by Engr-in-Charge. |
| 100 | S&Fto MCB SP 6-32 Amp with 10KA breaking capacity of \"C\" series in distribution boardswith all accessories complete all as per specified and as directed by Engr-in-Charge. |
| 101 | Dismantling and Taking down old u/s street / building sequrity Light fittingsfrom poles, flood lights, post top lantern lights and garden lights forreplacementwith LED fittings all as specified and as directed by Engr in Charge. |
| 102 | Supply and fix in Repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete Specified and directed by Engr in charge. |
| 103 | M&L for GI bracket 1.5 mtr long made out of GI pipe 40mm dia bend to suitable radius incl clamps nuts bolts washersincl painting with aluminum paint etc complete all as specified and directed by Engr in charge. |
| 104 | Supply and fix in replacement exhaust fan, engineering plasticbody complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm AC single phase with, blades, and frame and louvers of size 300 mm sweepall as per specified and as directed by Engr-in-Charge. |
| 105 | M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore,medium grade, 2.5 metres length,buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion in any type of soil including testing on completion for desired result all as specified. |
| 106 | M & L for Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt,connected to MS galvanized earh stripof size 25 x 4 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, GI strip laid in dia 40 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit (30X30X30cm) with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified. |
| 107 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 110935.00 and any other reduction if any from quoted amount. |
