Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbingdown with water etc. and removing debrish from site complete all as specified and directed. |
| 2 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc.including removing of unserviceable material from site complete all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removing of rubish from site complete all as specified and directed. |
| 4 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided including reinforcement cut as required to facilitate demolition and removing debries from site of work completeall as specified and directed. |
| 5 | Dismantling of timber scantling 40 Sqcm and over in section, in any position in framed work and removing materials from site of work complete all as specified and directed. |
| 6 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for and removing materials from site of work complete all as specified and directed. |
| 7 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises completeall as specified and directed. |
| 8 | Dismantling of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 9 | Taking down chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 10 | Taking down chowkats or frames with shutters exc. 1.50 sqm but n.exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 11 | Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each complete all as specified and directed. |
| 12 | Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each and refixing in the same opening complete all as specified and directed. |
| 13 | Taking down chowkhats with shutter (without taking of shutter from the frame) exc.1.5 Sqm but n.exc 4.0 Sqm each and refixing in same / other opening with using hold fast, minor cement concrete work and making good complete all as specified and directed. |
| 14 | Material and labourfor 15mm thick rendering in cement mortar (1:4) on fair faces of brick work in two layers, first layer of 10mm thick and top layer of 5mm thick with using liquid water proofing coumpound (WPC) @ 200ml/50Kg bag or as per manufacturers instructionand finish the surfaceseven and smooth without using extra cement as in wall complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. |
| 15 | Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) andfinish the surfaceseven and smooth without using extra cement as in wall complete all as specified and directed. |
| 16 | Material and labour for 5mm thick rendering onconcrete surfaces in cement mortar (1:3) andfinish the surfaceseven and smooth without using extra cementin ceiling complete all as specified anddirected. |
| 17 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and directed. |
| 18 | Supply only liquid water proofing compound (WPC) completeall as specified and directed. |
| 19 | Material and labour for preparation of new plastered surfaces of wall and applying three coat of white wash completeall as specified and directed. |
| 20 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer including applying 1mm thick wall care putty complete all as specified and directed. |
| 21 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash completeall as specified and directed. |
| 22 | Materials and labour for complete removal of existing treatment of old decorated surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer including applying2mm thick wall care putty including preperation of surface complete all as specified and directed. |
| 23 | Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamel paint complete all as specified and directed. |
| 24 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamel paint complete all as specified and directed. |
| 25 | Material and labour for preparation of old decoratedsurfaces of wall and applying one coat of white wash complete all as specified and directed. |
| 26 | Material and labour for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 27 | Material and labour for PCC (1:2:4), type B1, (using 20mm graded stone aggregate), as in coping, bed plate, kerbs, water troughs and like including weathering, slightly rounded or chamfered angles and throating, including necessaryformwork complete all as specified and as directed |
| 28 | Material and labour for brick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6)complete all as specified and directed. |
| 29 | Materials and labour for half brick thick brick work with sub class `B` bricks, old size, straight or curved on plan to any radius built in cement mortar(1:4) complete all as specified and directed. |
| 30 | Material and labour for well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 31 | Material and labour for well-seasoned 2nd class hard wood plain fillets, square, rectangular or triangular insection, wrought, secured with nails or brads, sectional area exc. 13 sqcm but not exc. 25 sqcm complete all as specified and directed. |
| 32 | Supply and fix 35mm thick 2nd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all asspecified and directed. |
| 33 | Supply and fix factory made 30mm thick second class hardwood plain framed panelled shutters (any numbers of panels) with panels of timber flat both sides (feather edged) or of veneered particle board medium density, wood particle with commercial face veneers including framing is moulded on solid (for each side) and fitted to chowkats complete all as specified and directed. |
| 34 | Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 35 | Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 36 | Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. |
| 37 | Supply and fix mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders, framed balusters, walk ways; railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 38 | Supply and fix in repair solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC/Aluminium frame complete all as specified and directed. |
| 39 | Material and labour for second class hard woodsmall fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary\" labours; articles n. exc 200 cu. cm each complete all as specified and directed. |
| 40 | Suplly and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 41 | Suplly and fix stainless steel 100mm size butt hinges, medium weight complete all as specified and directed. |
| 42 | Suplly and fix 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed. |
| 43 | Supply and fix 100mm size aluminium alloy handles, cast type, anodised complete all as specified and directed. |
| 44 | Suplly and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed. |
| 45 | Suplly and fix in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed. |
| 46 | Supply and fix in repair mild steel 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 47 | Supply and fix door catcher/door magnet for cabinet / cupboard / wardrobe / door closer magnet and the same magnets come with a magnetic force of 9 Kgs, which is ideal for keeping cabinet doors closing tightly complete all as specified and directed. |
| 48 | Supply and fix 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 49 | Supply and fix 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed. |
| 50 | Supply and fix 4 mm thick figured glass pin head type and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed. |
| 51 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 52 | Material and labour for RCC (1:2:4) type B-1 (using 20mmgraded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 53 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 54 | Material and labour for mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 55 | Material and labour for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bres-summers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with rough finished flat surfaces of concrete complete all as specified and directed. |
| 56 | Supply and fix in repair kitchen stainless steel sink of steel grade-304, 1.00 mm thickwith plug, washers and wastes including bedding in cement mortar to dwarf wall or including cantilever cast iron brackets, connecting union etc., overall size 610 mm x 460 mm with bowl size 560mm x 406mm x 203mm including 32 mm bore waste coupling PTMT (minimum weight 45gms)and 32 mm dia PVC corrugated flexible waste pipe of 800 mm longcomplete all as specified and directed. |
| 57 | Material and labour for vitrified ceramic tiles (premium quality) 8 to 9mm thick, light shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 58 | All as per item No 57.00 above but in skirting and dado laid over and including 10mm thick rendering in cement mortar (1:4) and -ditto-. |
| 59 | Material and labour for non-skid ceramic coloured tiles (premium quality) 7 to 8mmthick (square/rectangular) area of each tile exceeding 0.18sqm but not exc. 0.38sqmas in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6)complete all as specified and directed. |
| 60 | Material and labour for glazed ceramic tiles of size 600x1200x8-9 mm (premium quality) coloured in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:3) completeall as specified and directed. |
| 61 | Material and labour for glazed ceramic tiles of size 300x450x7-8 mm (premium quality) coloured in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:3) completeall as specified and directed. |
| 62 | Material and labour for 20mm thick jade black granite for top shelves (of any type) work (table rubbed and polished) in cupboard shelves, steps, jambs, window cills, cooking platforms and like in cement mortar (1:4) including pointing, grooving to wall etc with white cement using marble dust with admixture of pigment to match with shade of granite including moulding/nosing fixed independently complete all as specified and directed. |
| 63 | Material and labour for machine cut cudappah stoneslab 20-25mm thick as in shelf including rubbing and polishing complete including taking down existing shelf complete all as specified and directed. |
| 64 | Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations completeall as specified and directed. |
| 65 | Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 66 | Material and labour for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’,thickness of concrete slab in 75mm complete all as specified and directed. |
| 67 | Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed. |
| 68 | Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed. |
| 69 | Supply and fix 15 mm bore steel tubesmedium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floorscomplete all as specified and directed. |
| 70 | Supply and fix 20 mm bore steel tubesmedium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors complete all as specified and directed. |
| 71 | Material and labour for cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 72 | Supply and fix in repair 15mm bore stop valves, castcopper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed bothends for iron pipe or for unions complete all as specified and directed. |
| 73 | Supply and fix in repair 15mm bore fancy type, chromium plated, two way, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 74 | Supply and fix in repair 15mm bore fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 75 | Supply and fix in repair 15mm bore fancy type wall mixer chromium plated, brass, round headed single liver with extruded brass made spindle and housing with wall flange, screwed down high pressure with long screwed shanks, screwed for iron pipe complete all as specified and directed. |
| 76 | Supply and fix in repair 15mm bore fancy type sink tap chromium plated brass, round headed single liver with quarter turn option with areator, swan neck type wall mounted with extruded brass made spindle and housing with wall flange, screwed down high pressure with long screwed shanks, screwed for iron pipe complete all as specified and directed. |
| 77 | Supply and fix in repair 15mm bore angle cock fancy type, chromium plated, cast copper foriron pipe complete all as specified and directed. |
| 78 | Supply and fix in repairPVC connection pipe 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 79 | Supply and fix in repair brass chromium plated shower rose 125mm size with or without swivel joint complete all as specified and directed. |
| 80 | Supply and fix in repair 15mm bore fancy type pillar tap long body (swan neck type) cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 81 | Supply and fix in repair 125mm PTMT grating doom(minimum weight 40gms) complete all as specified and directed. |
| 82 | Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) white in colour (ISI marked) hoisted and fixed in position all as specified in SSR Part-I including dismantling of old unseviceable existing tank complete all as specified and directed. |
| 83 | Supply and fix in repair 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed. |
| 84 | Supply and fix in repair vitreous china wash down water closet pan (pedestal Pattern) white (excluding fixing bolts flusing cistern and flush pipe) including connection to drain (or out going pipe) and to flush pipe anti syphonage pipe including P or S trap fixed on floorcomplete all as specified and directed. |
| 85 | Supply and fix in repair plastic water closet seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 86 | Supply and fix in repair vitreous china wash basin oval shaped counter sunk type of size 550 x 400mmincluding 32mm dia waste fittings, brass,chromium plated for glazed ware sinks, basin with long screws shanks and fly nutsend fixed complete all as specified and directed. |
| 87 | Supply and fix in repair vitreous china wash basin with pedestal type of size 550 x 400mm flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 88 | Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 89 | Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and direted. |
| 90 | Supply and fix in repair toilet paper holder, brass, chromium plated, fixed with stainless screw complete all as specified and directed |
| 91 | Supply and fix in repair brass CP basin mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed. |
| 92 | Supply and fix in repair 40mm bore high density polyethylene pipes (HDPE) with all fittings of pressure rating 6 kgf/sqcm fixed to walls, ceilings or in floors etc. complete all as specified and directed. |
| 93 | Supply and fix in repair 25 mm dia aluminium powder coated decorative / fancy type dropery rodwith bracket complete all as specified and directed. |
| 94 | Supply and fix in repair looking mirror ofsize 600mm x 500mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and directed. |
| 95 | Dismantling of 110/100/75mm dia PVC/ cast iron or reinforced concrete drain pipes with all fittings, jointed in cement mortar and taking out of trenches/ from wall, if required complete all as specified and directed. |
| 96 | Supply and fix solid PVC door frame of size 50x47 mm made out of 5mm PVC sheet plain colour reinforced with MS square tube as per specification and drawinggiven in SSR Part-II 2020 complete all as specified and directed. |
| 97 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification and drawinggiven in SSR Part-II 2020 complete all as specified and directed. |
| 98 | Supply and fix factory made PVC wire gauzed door shutters 30mmm thick (style) consisting of frame made of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20 mm width Stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of wire gauzed shutter, the wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly and jointed together with solvent cement as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed. |
| 99 | Supply and fix factory made 30mm thick flush shutters, solid core construction, with block board core both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 100 | Material and labour for cutting holes into or through brick wall built in cementmortar of superficial area not exc 150 sqcm and making good in CM (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified and directed. |
| 101 | Material and labour for cutting holes into or through brick wall built in cementmortar of superficial area exc 400 sqcm but n. exc 0.10 sqm and making good in CM (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified and directed. |
| 102 | Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n. exc 9mm complete all as specified and directed. |
| 103 | Supply and fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including stack clamp of suitable size complete all as specified and directed. |
| 104 | Supply and fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 105 | Fixing only 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including stack clamp of suitable size complete all as specified and directed. |
| 106 | Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including stack clamp of suitable size complete all as specified and directed. |
| 107 | Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 108 | Supply and fix 110mm bore PVC (SWR) juction single (singleT) equal or unequal with access door complete all as speified and directed |
| 109 | Supply and fix 110 mm bore PVC (SWR) bends with access door any radius complete all as speified and directed. |
| 110 | Supply and fix 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 111 | Supply and fix 75mm bore PVC (SWR) juction single (singleT) equal or unequal complete all as speified and directed. |
| 112 | Supply and fix in repair 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 113 | Supply and fix in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 114 | Supply and fix in repair 32mm bore PVC corrugated waste pipe 800mm long complete all as specified and directed. |
| 115 | Supply and fix in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 116 | Supply and fix in repair towel ring, fancy type, chromium plated, cast copper alloy fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 117 | Supply and fix in repair 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 118 | Supply and fix in repair 5mm thick glass corner shelf of size 300 x 300mm with stainless steel railing fixed with chromium plated screws complete all as specified and directed. |
| 119 | Supply and fix in repair stainless steel plate rack 0.85 mm thick of size 914x914x254mm of steel grade-204 complete all as specified and directed. |
| 120 | Supply and fix in repair soap dish, brass, chromium plated complete all as specified and directed. |
| 121 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed. |
| 122 | Material and labour for preparation of newly bitumen surfaces and applying two coats of bituminous aluminium paint @ 0.10 ltrs per sqm per coat complete all as specified and directed. |
| 123 | Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mmgraded stone aggregate) as in leveling course for laying floor/ roof finishes etc complete all as specified and directed. |
| 124 | Material and labour for pre-cast RCC (1:2:4) type B1 (using 20 mm graded stone aggregate)in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set incement mortar (1:4) complete all as specified and directed. |
| 125 | Material and labour for applying expoxy based protective coating over cleaned exposed reinforcement as well as new reinforcement provided for corrossion prevention and fresh plaster bonding to old concrete complete all as per manufacturer\"s instructions complete all as specified and directed. Make : Nitobond EP of M/s Fosroc or equivalent brand of make M/s Asian Paints Ltd/ M/s STP Ltd. |
| 126 | Material and labour for anti-termite treatement for the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wallincluding making good disturbed surfaces complete all as specified and directed.Note :The work shall be executed only through authorised applicator as approved by GE. |
| 127 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. .complete all as specified and directed. |
| 128 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store for keeping in safe custody for reuse complete all as specified and directed. |
| 129 | Material and labour for light/fan point wiring (concealed type) with single core PVCinsulated unsheathedmultistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including 20mm dia heavy duty rigid non metalic PVC conduit with accessories including modular flush metal boxeswith inner and outer modular cover plates for housingswitches, sockets and regulatorswith all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) multistranded FRLSH copper conductor as earth continuity wire and connected to earth dolly complete all as specified and directed.Note: (a) Red coloured cable shall be used for live connection,black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for Each individual circuit from the distribution board.(b) Quoted rate shall be included for cuttings /chasing the wall and making good disturbed surfaces to fix PVC conduit.(c) Modular cover plate with frame and modular flush metal box shall be measured and paid seperately under respective items. |
| 130 | All as per item No. 129.00 here-in-before but for bell/buzzer point controlled by one push button on independent board and -ditto-. |
| 131 | All as per item No. 129.00 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board and -ditto-. |
| 132 | All as per item No. 129.00 here-in-before but for one five pins 5 Ampssocket outlet point on same board and -ditto-. |
| 133 | All as per item No. 129.00 here-in-before but for 15 amps socket outlet on independent board with 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dollyand -ditto-. |
| 134 | All as per item No. 129.00 here-in-before but for one light point controlled by two 2-way switches of 5 amps and -ditto-. |
| 135 | All as per item No. 129.00 here-in-before but for 3 pin industrial socket outlet with 4.00 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 4.00 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dollyand -ditto-. |
| 136 | Supply and fix modular switch 2 way 6 amps, 1 module complete all as specified and directed. |
| 137 | Supply and fix modular switch 1 way 6 amps, 1 module complete all as specified and directed. |
| 138 | Supply and fix modular switch 1 way 16 amps, 1 module complete all as specified and directed. |
| 139 | Supply and fix modular bell push 6 amps, 1 module complete all as specified and directed. |
| 140 | Supply and fix modular shuttered sockets 6 amps, 3/5 pin combined two module complete all as specified and directed. |
| 141 | Supply and fix modular shuttered sockets 6/16 amps, 3/5 pin combined two module complete all as specified and directed. |
| 142 | Supply and fix modular fan regulator step type 120W, 2 module complete all as specified and directed. |
| 143 | Supply and fix modular white cover plate with frame of 1/2 module complete all as specified and directed. |
| 144 | Supply and fix modular white cover plate with frame of 3 module complete all as specified and directed. |
| 145 | Supply and fix modular white cover plate with frame of 8 module complete all as specified and directed. |
| 146 | Supply and fix modular white cover plate with frame of 6 module complete all as specified and directed. |
| 147 | Supply and fix modular white cover plate with frame of 4 module complete all as specified and directed. |
| 148 | Supply and fix modular flush metal box 1/2 module complete all as specified and directed. |
| 149 | Supply and fix modular flush metal box 3 module complete all as specified and directed. |
| 150 | Supply and fix modular flush metal box 4 module complete all as specified and directed. |
| 151 | Supply and fix modular flush metal box 6 module complete all as specified and directed. |
| 152 | Supply and fix modular flush metal box 8 module complete all as specified and directed. |
| 153 | Supply and fix in repair modular type telephone socket 1 module complete all as specified and directed. |
| 154 | Supply and fix in repair modular type TV socket 1 module complete all as specified and directed. |
| 155 | Supply and fix bell ding dong AC, 230 Volts, single pole complete allas specified and directed. |
| 156 | Supply and fix lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete allas specified and directed. |
| 157 | Supply and fix ceiling rose, 3 terminals/ Phases, fabricated of PVC/Polycarbonate, isolated body complete all as specified and directed. |
| 158 | Supply and fix rigid non-metallic PVC conduitof 20mm dia including all fittings such as tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed. |
| 159 | Supply and fix in repair modular fan regulator step type 120W, 2 module complete all as specified and directed. |
| 160 | Material and labour for painting and hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fancomplete all as specified and directed.Note:- Item obtained from item No 128.00 shall be reused under this items. |
| 161 | Supply and fix in repair sheet metal enclouser VTPN DB 4 ways double door having facility to fix MCCB in incomer and MCBs in outgoing, IP-43 type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed. |
| 162 | Supply and fix in repair sheet metal enclosureTPN DB 4 waysdouble door having facility to fix MCB in incomer and MCBs in outgoing,metal door IP-43type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed. |
| 163 | Supply and fix in repair sheet metal enclosureSPN DB 8 waysdouble door having facility to fix MCB in incomer and MCBs in outgoing,metal door IP-43type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed. |
| 164 | Supply and fix in repair MCCB 100 Amps current capacity, 415V, 25 KA, 4 Pole, with adjustable thermal and magnetic release type complete all as specified and directed. |
| 165 | Supply and fix in repair MCB SP, 240 Volts, of 6 to 32 amps current rating, 10 KA breaking capacity \"C\" series complete all as specified and directed. |
| 166 | Supply and fix in repair MCB SPN, 240 Volts, 40 amps, \"C\" series, breaking capacity 10 KA complete all as specified and directed. |
| 167 | Supply and fix in repair MCB TPN, 240 Volts, 63 amps,\"C\" series, breaking capacity 10 KA complete all as specified and directed. |
| 168 | Supply and fix in repair MCB TPN, 415 Volts, 100 amps,\"C\" series, breaking capacity 10 KA complete all as specified and directed. |
| 169 | Supply and fix in repair industrial plug and socket type DB (functional unit) 20 Amps capacity with provision of single pole 20 amps MCB, plug top and earth plug, grouted flush to walls complete all as specified and directed. |
| 170 | Supply and fix in repair LED tube cool day light fitting 1 x 20W (+/- 5%), 220V, AC with extruded strip in thermally conductive material & extruded housing in optically efficient material milky white with system lumen efficacy > 120 lumen per watt minimum system 2300 - 2400 and chip, Integrated electronic driver, SMD based LED constant current supply with double sided connection to avoid short circuit and surge protection greater than 2.5 KV, IP 20 protection and CRI>80, Power factor > 0.95, THD less than 15%, correlated Colour temperature (CCT) of 6500K, Operating Voltage of 140 V to 270 V, frequency of 50Hz burning hours 50000 hours with comprises of CRCA pre coated metal housing complete all as specified and directed. |
| 171 | Supply and fix in repair LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed. |
| 172 | Supply and fix 300mm sweep steel body exhaust fan AC single phase 230/240 volt. 1400 RPM, heavy duty, ISI marked, along with metal blade powder coated metalic finish with GI sheet louvers, low noise including necessary electric connection with and including cutting/making opening having dia of the hole for 300mm sweep exhaust fan inany type of walls of any description with nut, bolt, washer and making good distrubed surfaces complete all as specified and directed. |
| 173 | Supply installation testing and commissioning of Electric storage water heater (rust and shock proof body) with attractive looks and corrision resistance inner tank having capacity 25 litre, 5 star rated with multi function safety valve , heating element, indicating lamps etc all as per following specifications :-(a) Power / Input : 8.7 Amp, 230 V, 50 Hz (b) Rated Power input in KW : 2 KW(c) Maximum rated Pressure : 8 Bar (0.8 Mpa) (d) Storage Capacity : 25 litre (e) Installation type : Wall mounted Vertical(f) Mean Hot Water Outlet - 75 degree celcius (g) Mixing factor - 30 % maximum (h) Water Proof degree - IP x 4 (j) Class of appliance - Class I (k) Heating element : Incoloy glass coated heating element, superior heating performance with excellent resistance to both oxidation and carbonization at high temperature setting . Resists corrosion against extreme and hard water conditions with minimum energy loss. Contd... |
| 174 | (l) Inner container : It shall be Feroglass coating, made of ultra thick super cold rolled steel plates with superior corrosion resistance and \" anti-rust property\".(m) Anode rod - The tank has an anode rod with a stainless steel core. (n) Insulation : CFC free thicker PUF insulation. (o) Star Rating : 5 Star from BEE complete all as specified and directed. Make : Jaquar& Company Pvt Ltd / USHA/ AO-Smith. |
| 175 | Material and labour forconcealed submain wiring comprising single core , 2 run of 4 sqmm nominal cross sectional area, FR-LSHmultistrandedcopper conductor cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including appropriate dia. in PVC conduit and its fittings complete including provision of 1 run of 4 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earthwirecomplete including taking down old unserviceable sub main wiring complete allas specified anddirected.Note :-(a) Cost for extra length of cables / wire required for connection to MCBs/DB\"s shall be included in quoted rates.(b). Cost for cuttings /chasing of wall etc and making good the disturbed surface shall be included in quoted rates. |
| 176 | Material and labour forconcealed submain wiring comprising single core , 2 run of 6 sqmm nominal cross sectional area, FR-LSHmultistrandedcopper conductor cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including appropriate dia. in PVC conduit and its fittings complete including provision of 1 run of 6 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earthwirecomplete including taking down old unserviceable sub main wiring complete allas specified anddirected.Note :-(a) Cost for extra length of cables / wire required for connection to MCBs/DB\"s shall be included in quoted rates.(b). Cost for cuttings /chasing of wall etc and making good the disturbed surface shall be included in quoted rates. |
| 177 | Material and labour forconcealed submain wiring comprising single core , 3 run of 10 sqmm nominal cross sectional area, FR-LSHmultistrandedcopper conductor cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including appropriate dia. in PVC conduit and its fittings complete including provision of 1 run of 10 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earthwirecomplete including taking down old unserviceable sub main wiring complete allas specified anddirected.Note :-(a) Cost for extra length of cables / wire required for connection to MCBs/DB\"s shall be included in quoted rates.(b). Cost for cuttings /chasing of wall etc and making good the disturbed surface shall be included in quoted rates. |
| 178 | Material and labour for earthing complete with copper earthplate electrode of size 600 x 600 x 3.15mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to copper strip of size 20 x 3mm earth lead by means brazing after fixing of nuts, bolts, check nuts, washers of galvanised iron steel,protected by HDPE pipe 40mm dia of pressure rating 6 kgf/cm2allas directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 40 x 40 x 6cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel,wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion including taking down old existing unserviceable earthing set complete all as specified and directed.Note:- Strip upto 7.5m length including testing shall be included in quoted rates. |
| 179 | Material and labour for earthing continuity conductor or main earthing lead fixed to wall or recess or chases with20 x 3.15 mm copper strip fixed on porcelin insulator at distance 100 cm including nut bolt drilling hole etc ncluding taking down old existing unserviceable earthing strip complete all as specified and directed.Note : Joining of copper strip shall be made by brazing after fixing of nuts & bolts. |
| 180 | Supply and fix in repair LED street light fitting 35 Watt, 230 volts made with pressure die cast housing with toughened glass with high powered LED, IP-66 protection high power LED with secondary lenses and system efficiency should be minimum 110 lumen per watt. Driver should be BIS approved silicon filled potted driver with inbuilt 4KV surge protection device, THD shall be <10%, power factor >.95, CCT 5700K and brand name should embossed/engraved on the LED fitting for traceability till life complete all as specified and directed. |
| 181 | Material and labour for taking down existing cable of 70/95/120 Sqmm size from the panel and reconnection of the same as per direction of Engineer-in-Charge complete all as specified and directed. |
| 182 | Supply and fix in repair street light bracket made of 1.5 RM length of GI pipe of light grade of 40 mm dia in proper shaped, bend, threadedand drilling holes for wire entry and MS clamps made of 40x5mm (02 Nos) with nut & bolts of suitable size in proper shape cmplete all as specified and directed. |
| 183 | Taking down electric meter from inside room and refixing the meter with necessary electrical connection near main door in proper mannar including thermoplastic polystrene of IP 65 single metering cover wall mounted of size 217x253x115 mm with transparent glass and necessary fixing nut bolt and clamp for intallation of single/three phase meter including connection & suitable writing of Qtr Number on meter Box by paint complete all as spcified anddirected |
| 184 | Material and labour for complete removal of existing treatement of old decorated steel surface (inner & outer surface) of existing indoor panel of size 1.50 x 1.00 x 0.30 meter and applying two coats synthetic enamel paint over one coat of red oxide zinc chrome primer by spray painting including preperation of surface complete all as specified and directed. |
| 185 | Taking down electric water heater from bathroom room and refixing the same after finishing of bathroom with fixing nut & bolt if required complete all as spcified anddirected.Note - Contractor kept the water heater in safe custody for reuse and if any damaged found contractor replaced with new one without any extra cost. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
