|
| 1 | Dismanteling doors ,windows and clerestory windows (steelor wood) shutter including chowkhats,architrave,holdfasts etc. complete and stacking within 50 meters lead:of area of 3sqm.and below 15.12.1 |
| 2 | Dismanteling doors ,windows and clerestory windows (steelor wood) shutter including chowkhats,architrave,holdfasts etc. complete and stacking within 50 meters lead:of area beyond 3sqm 15.12.2 |
| 3 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):2nd class D- wood 9.1.4 |
| 4 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class D- wood : 35mm thick 9.6.3 |
| 5 | providing and fixing glazed shutter for doors,windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S pressed butt hinges finished of required size with necessary screws 30 mm second class deodar wood 9.10.3.2 |
| 6 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood : 30mm thick 9.28.3.2 |
| 7 | providing &fixing of ply 19mm thick ply including cutting wasteage fevicol carriage etc complete item of superior make ( green,century,amulya archid ) conforming BWP 710 LMR |
| 8 | providing and fixing of 0.85mm thick sunmica including cutting ,wastage,fevicols nails etc.complete (green,amulya,vigro) LMR |
| 9 | providing and fixing 4mm thick straight line teak ply including cutting ,wastage,fevicol,nails,carriage etc.complete (green,century,archid) LMR |
| 10 | providing and fixing nickel plated m.s pipe curtain rods ,with nickel plated brackets including fittings (9.47.2)25mm dia |
| 11 | proving &fixing ISI marked almunium hanging floor door stoper ,ISI marked andized with neceesay screw etc complete single rubber stopper 9.103.1 |
| 12 | providing and fixing magnetic catcher of approved quality in cupboard/wardrobes shuteers including fixing with mecessary screws etc. complete double strip (horizotal type) 9.116.2 |
| 13 | Providing and fixing special quality bright finished brass cupboard or ward robelocks with four levers of approved quality including necessary screws etc. )75mm 9.80.2 |
| 14 | Renewing glass panes, with wooden fillets wherever necessary 14.7.1Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 14.7.1 |
| 15 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or richer mix (i/c equivalent design mix) 15.2.2 |
| 16 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 4.4.3 |
| 17 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm. 11.52.2 |
| 18 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. 15.56 |
| 19 | 12mm thick cement plaster of mix (1:4)1cement :4 fine sand 13.1.1 |
| 20 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) 14.1.1 |
| 21 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 13.100 |
| 22 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete: 1mm thick 13.88.1 |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. 13.107 |
| 24 | distempering with 1st quality acrylic/oil bound washable distemper( ready made )having VOC (volatile organic compound ) content less than 50grams /liters of approved manufacturer and of required shade and colour complete as per manufacturers ; specifications ,one or more coats on old works , 13.116 |
| 25 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture on New work 13.77 |
| 26 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.2.6.1 All kinds of soil 2.6.1 |
| 27 | Engaging welder including the hire charges welding set and helper for mislaneous welding works at site LMR |
| 28 | Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock isdamaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 14.74 |
| 29 | providing and laying in position cement concrete of specified grade including curing but excluding cost centtring and shuttering ..all work upto plinth level 1:3:6 (1cement:3course sand :6 graded stone aggregate 40mm nominal size 4.4.6 |
| 30 | providing and laying in position cement concrete of specified grade including curing but excluding cost centtring and shuttering ..all work upto plinth level 1:2:4 (1cement:2course sand :4 graded stone aggregate 40mm nominal size 4.4.4 |
| 31 | Demolishing reinforce cement concrete manually/by mechanical means including disposal of unserviceable f material within 50 meters lead as per direction of Engineer-incharge. 15.3 |
| 32 | Demolishing brick work manually/by mechanical means including disposal of unserviceable f material within 50 meters lead as per direction of Engineer-incharge: in cement mortar 15.7.4 |
| 33 | steel reinforcement for R.C.C. work including straightening,cutting,bending ,placing in position and binding all complete upto plinth level 5.22.6 |
| 34 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)including extra for upto five floor 6.1.4 |
| 35 | Extra for brickworkwith common burntclay bricks/cement concrete bricks in superstructurre above plinth level upto floor five level. 6.4 |
| 36 | half Brick masonary with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand )upto plinth level 6.15.2 |
| 37 | Extra for half brickworkwith common burntclay bricks/cement concrete bricks in superstructurre above plinth level upto floor five level.(6.15.2) 6.16 |
| 38 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded 10.2.2 |
| 39 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 40 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 10.25.2 |
| 41 | providing and fixing of powder coated sheet for various works LMR |
| 42 | Providing & fixing water closet squatting pan (Indian type W.C.pan) with 100 mm sand cast Iron P and S trap, 10 liter low level white PVC flushing cistern, including flush pipe (of approved make) with manulaay cantrolled device ( handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and wherever required: white vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests 18.1.2 |
| 43 | Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid , 10 ltr low level white P.V.C flushing cistern, including flush pipe with manually controlled device , conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required WC Pan with ISI Marked white solid plastic seat and lid 18.2.1 |
| 44 | Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S 13983 with C.I brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460mm bowl depth 200mm 18.11.2.2 |
| 45 | providing and fixing of PVC low level flushing cistern with manually 18.19.1 |
| 46 | Providing and fixing mirror of superior glass and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing oval shape LMR |
| 47 | Providing and fixing of PTMT waste coupling 31mm 18.69.1 |
| 48 | Providing and fixing of PTMTwaste coupling 38mm 18.69.2 |
| 49 | providing and fixing SS soap case LMR |
| 50 | Providing and fixing SS towel rail complete LMR |
| 51 | Providing and fixing SS towel ring complete LMR |
| 52 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work- exposed on wall (medium) 15mm nominal bore 19.4.1.1 |
| 53 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work- exposed on wall (medium)20mm nominal bore 19.4.1.2 |
| 54 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work- exposed on wall (medium) 25mm nominal bore 19.4.1.3 |
| 55 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work- exposed on wall (medium) 32mm nominal bore 19.4.1.4 |
| 56 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work- exposed on wall (medium) 40mm nominal bore 19.4.1.5 |
| 57 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work- exposed on wall (medium)50mm nominal bore 19.4.1.6 |
| 58 | providing fixing of brass bib cock of approved quality 15mm dia 19.9.1 |
| 59 | providing fixing of brass bib cock of approved quality 20mm nominal bore 19.10.2 |
| 60 | providing and fixing of ball valve (brass) of approved quality .high or low pressure with plastic floats 15mm nominal bore 19.12.1 |
| 61 | providing and fixing of ball valve (brass) of approved quality .high or low pressure with plastic floats 20mm nominal bore 19.12.2 |
| 62 | providing and fixing of ball valve (brass) of approved quality .high or low pressure with plastic floats 25mm nominal bore 19.12.3 |
| 63 | providing and fixing unplasticized PVC coneection pipe with brass unions 15mm nominal bore 45cm long 19.15.2.1 |
| 64 | providing and fixing of 15mm nominal bore CP brass short body bibcock (cera,hindware,jaguaar) LMR |
| 65 | providing and fixing of 15mm nominal bore CP brass long nose bibcock (cera,hindware,jaguaar) LMR |
| 66 | providing and fixing of 15mm nominal bore CP angle valve (cera,hindware,jaguaar) LMR |
| 67 | providing and fixing pillar cock (cera jaquar) LMR |
| 68 | providing and fixing 15mm nominal bore standard CP brass wall mixer in kitchen and bathroom of approved quality (cera,hindware,jaguar) LMR |
| 69 | providing & fixing of PVC flexible type waste pipe for sink and wash basin LMR |
| 70 | providing & fixing of CP greating in kitchen and bathroom LMR |
| 71 | providing &fixing of PVC Pipes for drainage ,severage,rain water flow pipe etc including labour &material costs complete job in all heights 4\" dia LMR |
| 72 | providing &fixing of PVC Pipes for drainage ,severage,rain water flow pipe etc including labour &material costs complete job in all heights 2\"\" dia LMR |
| 73 | Chequerred precast cement concrete tiles 22mm thick in footpath andcourtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing, cleaning and curing completeon 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse,dark shade using ordinary cement 11.29.3 |
| 74 | maintence of existing chequered /onyx tile by replacing damaged tiles with new one joints filling with cement grout (colour pigment matching with tile and colouring etc,including cost of labour and material LMR |
| 75 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 19.38 |
| 76 | providing and fixing ACP sheet 4mm thick LMR |
| 77 | Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surfacetof mud phaska to proper slope, relaying mud plaster gobri leaping andtiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand),including replacing unserviceable tiles or bricks with new ones anddisposal of unserviceable material to the dumping ground (the cost of the new bricks and tiles are excluded) within 50 m leads .(note deduction for the cost of tiles or bricks rate 500.05-200=300.05/sqm) 14.14 |
| 78 | cleaning of roof top / stairs etc area by engaging labour SR |
| 79 | providing and fixing of PVC water tank lids(cover) to cover the top of water tank LMR |
| 80 | providing and fixing of PVC tank threaded cover including locking arrangement complete job LMR |
| 81 | providing and fixing of almunium frames for balconies &partion in existing rooms complete job .including the cost of material and labour . LMR |
| 82 | providing and fixing of phase for repair of CP mixe/ bib cocks (plain) LMR |
| 83 | providing and fixing of phase for repair of CP mixe/ bib cocks (disk) LMR |
| 84 | proving and fixing washer for repair of brass bibcock LMR |
| 85 | carpenter 2nd class SR |
| 86 | unskilled labour SR |
| 87 | skilled labour SR |
| 88 | plumber SR |
| 89 | helper for plumber SR |
| 90 | providing and fixing central hole mixtureof jaquar cera eq brand LMR |
| 91 | providing and fixing of sink mixtureof jaquar cera eq. brand. LMR |
| 92 | engaging trolley for shifting of mulba from site to beyond the muncipality limit including loading and unloading LMR |
| 93 | providing and fixing wardrobes with iron sheet hallow frame (4X1/2\"X2\") with 24 guage sheet &shutter with 22 guage sheet including lock and handles (godrej) painting inside with plain paint and outside with tenture paint (Asian,Nerolac,)fixing of frame s either 3\"inches screw with drill and other works complete jobs ...for frame LMR |
| 94 | providing and fixing of PVC pipe 6\" for drainage including all fitting LMR |
| 95 | SLIDING CHANNEL 20\"\" LMR |
| 96 | SLIDING CHANNEL 25MM LMR |
| 97 | providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying (a)after surface preparation ,frst layer of cement @0.488 kg/sqm mixed with water proofing cement compound @0.253kg/sqm(b)laying second layer of fibre glass cloth when the first layer is still green .Overlps of joints of fiber cloth should not be less than 10cm.(c)third layer of 1.5mm thickness consisting of slurry of cement @1.289kg/sqm mixed with water proofing cement compound @0.670kg/sqmand coarse sand @1.289kg/sqm. this will be allowed to air cure for 4 hours following by water curing for 48 hours .the entire treatment will be upto 30cm on parapet wall and tucked into groove in parapet all around 23.6 |
| 98 | providing and fixing of PVC panelling on walls 8 to 10 mm thick inc, all fitting and fixtures complete (wall affair or any equvl. Make) LMR |
| 99 | providing and fixing wall paper or required colour shade and design of standard make as directed by the EIC LMR |
| 100 | P/F Seat Jet LMR |
| 101 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.19.3.2 Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 25mm nominal outer dia pipes. (Internal work) |
| 102 | 25mm nominal outer dia pipes. (External work) |
| 103 | P/f SS handle 6\"\" LMR |
| 104 | P/f handjet with complete job LMR Please Enable Macros to View BoQ information |
