|
| 1 | Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including racking out joints, hacking for keys, scrubbing down with water etc all as specified and directed. |
| 2 | M&L for rendering 15 mm thickreadymade plaster on inner/outer walls by adding 17-19% of potable water by weight of material for thickness above 15mm it is recommended to be applied in multiple layers. ready mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the compressive strength @ 28 days 10-12 Mpa/Bulk density 1500-1600 Kg/m3. (Note : The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20 Mtr ht all as specified and directed) |
| 3 | M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equivalent in Asian paint, Nerolac etc having five years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint complete all as specified and as directed.Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted.(ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work.(iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building.(v). The colour / shade will be all as approved by GE. (vi) The cost of Scaffolding wherever required are deemed to be included in the Rate Quoted by the Contractor. |
| 4 | M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper over a layer of 3mm thickwall care putty to make the surface smooth using roller all as specified and prescribed by manufacturer of paint complete all as specified and as directed by Engr-in-charge.Note:- (1) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture\"s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted.(ii) The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work.(iii) All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iv) After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour/shade will be as approved by GE. |
| 5 | M&L for preparation of old decorated surface of external wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturersand applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equivalent in Asian paint, Nerolac etc having five years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint complete all as specified and as directed.Note:- 1. The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture\"s instruction before application of emulsion paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted.(ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work.(iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building.(v). The colour / shade will be all as approved by GE. (vi) The cost of Scaffolding wherever required are deemed to be included in the Rate Quoted by the Contractor. |
| 6 | M&L for preparation of newly plastered surface of internal wall all as prescribed by manufacture of paint and applying two coats of acrylic distemper over a layer of 3mm thick wall care putty to make the surface smooth using roller all as specified and prescribed by manufacturer of paint complete all as specified and as directed by Engr-in-charge.Note:- (1) The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of distemper. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted.(ii) The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work.(iii) All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iv) After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour/shade will be as approved by GE. |
| 7 | M&L for preparation of old or previously treated cementedsurfaces of any description,not otherwise descri- bed over 10cm width or girth and applying one coats ofsynthetic enamel paintcomplete allas specified and directed. |
| 8 | M&L for preparation of old or previously treated steelsurfaces of any description,not otherwise descri- bed over 10cm width or girth and applying one coats ofsynthetic enamel paintcomplete allas specified and directed. |
| 9 | M&L for preparation of old or previously treated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying one coats ofsynthetic enamel paintcomplete allas specified and directed.. The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours. |
| 10 | M&L for preparation of existing old untreated CGI/PGI sheet roof surface of any description not otherwise described over 10 cm width or girth by cleaning , removing dust and incl washing and cleaning etc to receive painting and making good with red lead whereever required and applying two coats of roof paints ( coptic of Jenson & Nicholsan or Antisol of Berger)complete all as spd and directed The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours. |
| 11 | M&L for preparation of existing old treated CGI/PGI sheet roof surface of any description not otherwise described over 10 cm width or girth by cleaning , removing dust and incl washing and cleaning etc to receive painting and applying onecoats of roof paints ( coptic of Jenson & Nicholsan or Antisol of Berger)complete all as spd and directed The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours. |
