|
| 1 | Preparation of old decoratedsurface of wall and including cornices plastered or unplastered surfaces bybrooming down or steel wire brushing toremove all loose scales, and foreign materials scarping down , smoke soot moulds, moss and efflorescent salts treating oil and greasy spots andM&Lapplying two coat of white wash on wall, complete all as specified and directed. by Engr-in-Charge |
| 2 | Preparation of old decoratedsurface of ceiling and including cornices plastered or unplastered surfaces bybrooming down or steel wire brushing toremove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying Two coat of white washcomplete all as specified and directed.by Engr-in-Charge. |
| 3 | Preparation of old decoratedplastered or unplastered surfaces of wall including washing , rubbingdown and stoppingof distempered surface M&Lfor applyingone coat of distemperoil emulsion paint white or tinted complete all as specified. |
| 4 | preparation of existing treatment on wall (any number of layers ) by scarping with steel scrapersor any other mean including filling depressions of scrapped surface with putty and preparation of surface for further treatment and M&L for two coats of distemperoil emulsion white or tintedon wallscomplete all as specified and directed by Engr-in -Charge. |
| 5 | Preparation of old/New painted surface of wood and wood based materialany description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed. |
| 6 | Preparation of old/New painted surface of steel and iron surface of anydescription and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed. by Engr-in-Charge. |
| 7 | Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed |
| 8 | M&L rendering 10 mm thick in CM 1:6 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed . |
| 9 | M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L rendering 10 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed . Note :-work shall be executed upto G+5 storey bldg with necessary steel scaffolding as required. |
| 11 | M&L for preparation of the newly plastered surfaces of walls applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer &two or more coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. |
| 12 | M&L for preparation of the newly plastered surfacesof ceiling & applying3 coats of white wash on ceiling surfaces complete all as specified and directed. |
| 13 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified. |
| 14 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing)removing serviceavle tiles to store and rubbish off the premises . |
| 15 | M&L for coloured ceramic tilesof size 400x400x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:4 complete all as directed. |
| 16 | S & F for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 all as specified and as directed. |
| 17 | M&L for Glazed ceramic tiles in vertical surface 600x 300x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:3) complete all as specified and as directed. |
| 18 | M&L forVitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 19 | All as per item No 18 above but as skirting over and including 10mm thick rendering in CM 1:3. |
| 20 | M&L for 18-20mmthick coloured granitestone work Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite. |
| 21 | M&L Providing and applying cement base plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as directed. |
| 22 | Material & Labour for preparation of new plastered surfaces of walls applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 23 | M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing treatment by rubbing , brooming down, washing with water etc and providing and applying exterior grade putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge. |
| 24 | Demolition of reinforced cement concrete of any description and in any position inbeams, columns chajjas and similar items complete all as specified and directed. |
| 25 | M&L for PCC 1:2:4 type B 0 (using 12.5 mm gradedstone aggregate) as in copingexposed surfaces finished even and smooth using extra cement including necessary form work complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified. |
| 27 | Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified. |
| 28 | Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm eachwith shutters (without taking off shutters from frames ), complete all as specified. |
| 29 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, and refixing in same opening complete all as specified. |
| 30 | S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 31 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 32 | S&F factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS-1003(Part - I) kiln seasoned and chemically pressure treated (35 mm thick with 2nd class HW rail and style) complete all as specified and directed. |
| 33 | S&F factory made 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. |
| 34 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides compete all as directed. |
| 35 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made”. |
| 36 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headedcounter sunk S.S screws, all as per direction of EngineerIn- Charge.(Note: stainless steel butt hinges shall be paid separately under relevant item). |
| 37 | S&F double rebated, Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 38 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 50x 100 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 39 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item). |
| 40 | Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item |
| 41 | S&F Stainless steel 304 grade dash fastenersas in hold fast min length should not less than 125 mm of dia 12mm complete all as specified and as directed. |
| 42 | Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified |
| 43 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets. |
| 44 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 45 | S&F 125 mm long(size) butt hinges, stainless steel, complete all as specified. |
| 46 | S&F 100 mm long(size) butt hinges, stainless steel, complete all as specified. |
| 47 | S & F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified. |
| 48 | S&F in repair 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all asspecified. |
| 49 | S & F in repair 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified. |
| 50 | S & F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified. |
| 51 | S&F in repair 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded section or cast aluminiumalloy and fixed, complete all as specified. |
| 52 | S&F in repair 300mm long, stainless steel of AISI 304 grade,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed. |
| 53 | S&F in repair 250mm long, stainless steel of AISI 304 grade,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed. |
| 54 | S&F in repair 150mm long stainless steel barrel tower boltofextruded section, complete all as specified. |
| 55 | S&F in repair 200mm long stainless steel barrel tower boltof extruded section, complete all as specified. |
| 56 | S & F in repair 200mm long (size) aluminium anodised, barrel tower bolt of extruded section and fixed, complete all as specified. |
| 57 | S&F in repair 150mm size extruded aluminium alloy handle, fabricated type, anodised, complete all as specified. |
| 58 | S&F in repair 200mm size stainless steel AISI 304 grade fancy type handlecomplete all as specified and directed. |
| 59 | S&F in repair stainless steel AISI 304 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified and directed. |
| 60 | S&F in repair 100mm long, extruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified. |
| 61 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with steel wire staples, complete all as specified and directed. |
| 62 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed stainless steel wire staple, complete all as specified and directed. |
| 63 | Hacking out old broken glass of any thickness and any description from metal frame and supply and fixing 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding0.5 sqm in each pane complete all as specified and directed. |
| 64 | S&F 4.00 mm thick plain sheet glasswith wooden beads, PVC beading, aluminium beads, in square n.exc 0.5 Sqm in each pane, complete all as specified. |
| 65 | S&F4.00 mmthick figured glass, pin head type andglazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified |
| 66 | “S&F in repair vitreous pedestal pattern with ‘S’ trap fixed in position with necessary cement work complete all as specified and directed”. |
| 67 | S&F in repair PVC valve less symphonic action type flushing cistern low level 10 ltr capacity (ISI marked) white with inlet ball valve float and handle including brackets complete all as specified and directed”. |
| 68 | S&F in repair mortice lock of size 100mm with Brass fancy type andvertical type 4 levers with key in Tuplicatecomplete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F sinks made of stainless steel 1mm thick kitchenwith plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 70 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 71 | S&F in repair PVC connection pipe of 15mm x 600mm longwith 2 Nos brass check nuts with washers, complete all as specified. |
| 72 | S&F in repairs vitreous chinaware wash hand basin flat backwith fullpedestalofsize 550mm x 400mm complete including, CP Waste coupling ,waste pipe ,complete fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed by Engr in charge. |
| 73 | S&F in repair vitreous china squatting pan of orissa pattern long pan size580 x 440 mm white with \"p\"or \"S\" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. |
| 74 | S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified |
| 75 | S&F in repair fancy type brass chromium plated soap dish, complete all as specified. |
| 76 | S&F in repair CP grating 125mm dia, complete all as specified. |
| 77 | S&F in repair stainless steel peg set of 6 peg, 45 centimeter long, complete all as specified. |
| 78 | S&F in repair fancy type 15mm dia brass chromium plated quarter turn basinmixer with braided hose for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified. |
| 79 | S&F in repair15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. |
| 80 | S&F in repair fancy type 600mmx450mm bevelled edge mirror of selected quality glass mounted on 4mm thickand rectangular shape and fixed to wooden plugs with chromium plated brass screw and cupwashers, all as specified. |
| 81 | S&F in repair fancy type 15mm dia chromium plated quarter turn fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as directed. |
| 82 | S&F in repair fancy type chromium plated quarter turn brass angle valve type suitable for 15mm bore pipe complete all as specified |
| 83 | S & F in repair fancy type 150mm size square brass CP shower rose including shower arm 600mm long all as specified. |
| 84 | S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP brackrt gaurd and railling 60 cm long complete all as specified. |
| 85 | S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified . |
| 86 | S&F in repair fancy type glass corner 250mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified . |
| 87 | S&Fin repair fancy type stainless steeltowel racksize 600mm X 300mm including apair of brass bracket |
| 88 | S&F in repair stainless steel of AE - SI 316 grade tubulartowel ringincluding apair ofCP brass bracket complete all as specified . |
| 89 | S&F in repairs bib tap with crutch or butterfly handle, quarter turnscrewed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium platedlong body with flange complete all as specified |
| 90 | S&F in repair bib tap, cast copper alloy chromium plated, screwed down high pressure with crutch of butter fly handle fancy type CP for 15 mm bore diacomplete all as specified and directed. |
| 91 | S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 910 mm x 460 mm with bowl size 410mm x 330mm x 160 mm including taking out existing sink with waste fittings complete all as specified. |
| 92 | S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified and directed. |
| 93 | M & L forPowder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 94 | M & L forPowder coated (minimum thickness of powder coating 50 micron) aluminium sliding windowwith aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware i.e.. handles, barrel tower bolts, hinges etc, powder coatedaluminium snap beading, screws etc. complete all as specified and directed Note : Panel filling i.e.. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately. |
| 95 | M & L forPowder coated (minimum thickness of powder coating 50micron) aluminiumwindow & Ventilator shutters side hung type aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware i.e.. handles, barrel tower bolts, hinges etc, powder coatedaluminium snap beading, screws etc. complete all as specified and directed Note : Panel filling i.e.. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately. |
| 96 | S&Ffactory made uPVC any colourfixed glazedwindow/ventilatormade of ( small series) frame 47 x 50mm mullion 47 x 68mm both having wall thickness of 1.9 + 0.20mm and single glazing bead of appropriate dimension ( Area upto 0.75 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made |
| 97 | S&Ffactory made uPVC any colour three track three panels sliding window with flyproof S.S. wiremesh ( Two nos. glazed & one no. wiremesh panels ) upto 1.50m ht made of big series frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 + 0.20mm and single glazing bead/ double glazing beading of appropriate dimension ( Area of window upto 1.50 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame & sash shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass and SS wire mesh fixed and drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made |
| 98 | Taking up or down 25 mm dia GI tubing and connections including cleaning for re-fixing or removal to store in any position upto G+5 storey bldg complete all as specified. |
| 99 | S&F 25 mm dia GI tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc as in horizontal or vertical surfaces upto G+5 storey bldg complete, all as specified. |
| 100 | Refixingold steel tubing and connections in new or old positions 25 mm dia any grade to wall and ceiling or laid in floors etc complete all as specified. |
| 101 | Taking up or down 20 mm dia GI tubing and connections including cleaning for re-fixing or removal to store in any position upto G+5 storey bldg complete all as specified. |
| 102 | S&F 20 mm dia GI tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc as in horizontal or vertical surfaces upto G+5 storey bldg complete, all as specified. |
| 103 | Refixingold steel tubing and connections in new or old positions 20 mm dia any grade to wall and ceiling or laid in floors etc complete all as specified. |
| 104 | Supplying and laying of CPVC 25 mm OD pipes SDR 11 & Plain/ Brass CPVC SDR 11 fittings as required on walls/ceiling or laying in floors upto G+5 storey bldg complete, all as specified. |
| 105 | Taking up or down 15 mm dia GI tubing and connections including cleaning for re-fixing or removal to store in any position upto G+5 storey bldg complete all as specified. |
| 106 | S&F 15 mm dia GI tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc as in horizontal or vertical surfaces upto G+5 storey bldg complete, all as specified. |
| 107 | Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain/Brass CPVC SDR 11 fittings as required on walls/ceiling or laying in floors complete all as specified complete with fitting as required. |
| 108 | S&F min wall thickness 1.65 mm Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as required and directed. |
| 109 | S&F in Soft closing ball bearing telescopic channel of size 20 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs |
| 110 | Demolition and breaking up drain pipesalt glazed ware, AC, PVC/CI or reinforced concret pipes internal dia of pipe 100mm /75mm |
| 111 | S&F 100 mm bore sand cast irondrain waste/vent pipes fixed to walls or floor jointed with lead jointsincl dismantling of old cast iron drain,waste, vent pipe of any description . |
| 112 | S&F 75 mm bore sand cast iron drain waste/vent pipes fixed to wall, floor jointed with cement joints incl dismantling of old cast iron drain,waste, vent pipe of any description. . |
| 113 | M&L Cast irondoorbends of 75 mm dia |
| 114 | M&L Cast iron doorbends of 100 mm dia |
| 115 | M&L Cast iron branch pieces , tee equal or unequal spigot or socket type or with parallel branches to 75 mm dia pipe fitted with access door complete all as specified by Engineer-in -Charge . |
| 116 | M&L Cast iron branch pieces , tee equal or unequal spigot or socket type or with parallel branches to 100 mm dia pipe fitted with access door complete all as specified by Engineer-in -Charge . |
| 117 | M&L in repairs ofreplacement ofbrass face spindle of existing 15mm dia bore concealed stop cock fixed as in repairs |
| 118 | M&L in repairs ofreplacement ofbrass face spindle (half turn / full turn) of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basic mixture and wall mixture of any description . |
| 119 | S & F in repairs ofsmallfittings galvanised iron/CPVC/PVC medium grade such as socket,elbow, nipple, tee, union, tank nipple, tank connectionetc of any size for 15mmbore GI (ISI marked) |
| 120 | All as per Srl Item No 57 above but 20mm GI(ISI marked) all as specified and directed. |
| 121 | Taking down cement plaster in patches onbrick work, racking out joints, hacking for key scrubbing down with water etc complete and removing the spoil to a distance of n.exc 100m & depositing where directed all as specified & M&L for 10 mm thck cement plaster in CM (1:6) on brick work/concrete surface finished even & smooth w/o using extra cement inculding two coat OBD with 1mm thick putty . the area of patches should not be more than 3.00 sqm. |
| 122 | S & F in repairs ofPVC Corner bracket golden colour suitable for drapery rod As per sample |
| 123 | S & Fin repairs ofPVC knobs/Lattu for drapery rod or cupboard suitable colour suitable ISI markedAs per sample |
| 124 | S & Fin repairs ofS S Bracket suitable for drapery rod with nuts & bolts. As per sample |
| 125 | S& F Mirror Cabinet Multi utility (355x 455mm) Complete all as specified and directed by Engr-in-charge. |
| 126 | S& Fin repairs ofwater closet seat Cover, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and as directed. |
| 127 | S&in repairs offramed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings;framework of water tanksand similar work conforming to Fe 410-0 or Fe 310-0 |
| 128 | S&F door seal of aluminium for doors of aluminium and wooden complete all as specified and directed by Engr-in-Charge. |
| 129 | M&L for Cleaning by disconnecting of water tank, duly removing all scale, dirt or mud, fungus etc and washing and flushing the tank with chlorine water for the capacity of tanks exceeding 250 Ltr but not exceeding 500 Ltr of RCC or PVC tanks including writing the letters on PVC or RCC tank as cleaned on duly mentioning date of cleaning with paint, hosting, reconnecting and refixing in position for roof treatment portion complete all as specified and directed by Engr-in-charge. Note: While cleaning any parts of the water tanks was broken / damaged the same shall be replaced by the contractor without any extra cost to the department |
| 130 | S&F in repairs triple layer rotational moulded polyethylene water storage tank (cylindricalvertical with closed top) of White colour hoisted and jointed in position including dismantling of tanks all as specified in SSR Part-I of 1000 ltr capacity complete all as specified and directed by Engr-in-charge. |
| 131 | Schedule of Credit |
