|
| 1 | M&L for preparation of old plastered/ un-plastered wall surfaces and applying one coat of white wash on walls including cornices, pilasters etc, complete all as specified and directed. |
| 2 | All as per item No.01 above, but on ceiling, complete all as specified and directed. |
| 3 | All as per item No-01 above but applying one coat of oil bound distemper white or any tint, complete all as specified and directed |
| 4 | All as per item No-01 above but applying one coat of oil bound distemper white or any tint on ceiling, complete all as specified and directed. |
| 5 | All as per item No-01 above but applying two coat of oil bound distemper white or any tint, complete all as specified and directed |
| 6 | Complete removal of existing treatment on walls complete all as specified and directed. |
| 7 | Material & Labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint in variou clour of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces of walls complete all as specified and as directed. |
| 8 | Material & Labour for applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint in variou clour of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces of walls complete all as specified and as directed. |
| 9 | M&L for applying two layer of wall care putty of approved make of each layer 1mm thick on walls as per manufacturar instructions with and including rubbing by means of sand / abrasive paper to have smooth finishing to receive primer / paint, complete all as specified and directed. |
| 10 | M&L for preparation of old painted wooden or wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping as required and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 11 | M&L for preparation of old painted steel surfaces (incl CGI/PGI sheet) of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 12 | Taking down cement plaster of any description on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed. |
| 13 | M&L for 15mm thick cement plaster in CM 1:4 on fair faces of bricks or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed. |
| 14 | M&L for 15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed. |
| 15 | M&L for Preparation of new plastered / unplastered surface of wall including cornices pilaster etc, and applying two coats of oil bound distemper, complete as specified and directed. |
| 16 | M&L for preparation of old plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on walls complete all as specified and directed. |
| 17 | M&L for preparation ofnew plastered surfaces of walland applying two coat of cement base paint on walls complete all as specified and directed. |
| 18 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 19 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 20 | Demolition of cement concrete (unreinforced) on ground floor or paving not exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 21 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 22 | M&L for PCC 1:4:8 type D-2 (40mm graded stone aggregates) as in foundation and mass concretewhere required as per direction of Engineer-in- charge complete all as specified and directed. |
| 23 | M & L for Walling of random rubble stone masonry, brought upto course, built in CM 1:6 complete all as specified and directed. |
| 24 | All as per item No. 23 above but except stone complete all as specified and directed. |
| 25 | M&L for brick workwith sub class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 26 | All as per item No. 25 above but except bricks complete all as specified and directed. |
| 27 | M&L for providing precast ce- ment concrete 1:3:6, type C1 (using 20 mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc., set in CM 1:6 (of any section indicated), landings, cover slabs, shelves etc with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed. |
| 28 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints with max depression 20 mm as specified, of random rubble walling uncoursed or brought upto course, complete all as specified and directed. |
| 29 | M&L for stone boulder filling hand packed tightly (any thickness) at back of walls over arches etc, and raising (or lowering) to the required level compete all as specified and directed. |
| 30 | All as per item No. 29 above but except stone boulders complete all as specified and directed. |
| 31 | M& L for flush pointing in cement mortar (1:3)to random rubble stone masonry, uncoursed complete all as specified and directed. |
| 32 | M&L for 75 mm thick PCC 1:4:8 type C-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc. finished the surface even & fair, complete all as specified and directed. |
| 33 | M&L for chequered cement concrete tiles with chemical resistant coating if size 300x300x 25mm thick, set & jointed in neat cement slurryin floors and pointed with grey cement mixed with pigments, laid over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 34 | M&L for sand filing under floor incl spreading and levelling in layers not exc 25 cm thick complete all as specified and directed. |
| 35 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade,laid jointed pointed with grey cement and no pigments,complete all as specified and directed by Engr-in-Charge. Note: The sample shall be got approved by GE before bulk procurement & lot shall be got tested independently by the GE. |
| 36 | M & L for plain cement concrete 1:2:4 type B-2, using 40mm graded crushed stone aggregates as in surfaces channels and drain complete all as specified and directed. |
| 37 | Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement including forms, moulds mitred/stopped ends etc. complete all as specified and directed. |
| 38 | M&L for MS work for fencing post and struts made from angle iron and flat iron in any section including cutting tops to shape , drilling holes and notching for fixing of wires etc confirming to Fe -290 grade, E-165, complete all as specified and directed. |
| 39 | Supply only chain link MS zink coated 60gm/sqm as per IS 4826 fencing of any mesh size and 3mm dia of wire complete all as specified and directed.NOTE: This item shall be measured and paid as per actual weight or standard weight as per SSR which ever is less. |
| 40 | Fixingonly chain link fencing including line wire, any mesh size and any type of standards rails straining bolt etc including provision of binding wire complete all as specified and directed. |
| 41 | S & F in repair galvanised 2 strand, steel barbed wire, 2.20mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, includdigng, securing or tying at crossings with and provisiion of galavnised (Zink coating 60 gsm) mild steel wire, staples or steel pins, etc as directed each line wire to measured,complete all as specified and directed. |
| 42 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt 5 to 10 cmlong and dia of neck not exc 15 mm complete all as specified and directed. |
| 43 | S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riv-eted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 290 gde E-165 complete all as specified and directed. |
