|
| 1 | M&L for cement concrete (1: 2 :4)type B-O (using 12.5mm graded stone aggregate) 25mm thick in floor complete all as specified. |
| 2 | M & L machine cut Kota stone 20 to 25 mm thick over 15 mm thick 1:6 cement screed base laid and jointed with grey cement slurry mixed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete up to deserid finish as directed. |
| 3 | Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level).complete all as specified. |
| 4 | Taking Down cement plaster or lime of any description including racking and joint hacking for key scrubing down with water etc complete all as specified. |
| 5 | M & L for 10 mm thick rendering inCM (1:6) on wall of fair faces brick & concrete surfaces finished even and smooth without using extra cement complete all as specified. |
| 6 | M & L for 5 mm thick rendering in CM (1:3) on Ceilingof fair faces brick & concrete surfaces finished even and smooth without using extra cement complete all as specified. |
| 7 | M&L rendering 10 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed . Note :-work shall be executed upto G+5 storey bldg with necessary steel scaffolding as required. |
| 8 | Material & Labour for preparation of new plastered surfaces of walls applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 9 | M & L two coat ofoil bound distemberon Newly surfaces on wall including all prereration complete all as specified & directed |
| 10 | M & L three coats of white washon newly surface on ceiling including all preparation complete all as specified & directed |
| 11 | Dismantling floor hearth or wall tiling including cement mortar bedding and removing debries off the premisis. |
| 12 | M&L for Non Skid coloured ceramic tiles 8mm thick(rectangular/square) of area0.06 sqm to n exc 0.11 sqm set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM (1:6) as in floors |
| 13 | M&L for Non Skid coloured ceramic tiles 8mm thick(rectangular/square) of area0.11 sqm to n exc 0.18 sqm set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM (1:6) as in floors |
| 14 | M & L Vetrified ceremic dark colour tiles 10 mm thick (squire/rectangular) polished area of each tiles n\" exc 0.36 sqm in floors over 15 mm thick screed bed in CM (1:6) etc set and jointing in neat cement slullry and pointed in white or coloured cement to match complete all as spd and directed |
| 15 | M&L for coloured ceramic tilesof size 600x600x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:6 complete all as directed. |
| 16 | M&L Water Proofing:a) Surface Preparation - Mild Chipping of the surface, Clean the Surface with Nano Bio wash.b) If onlinr leackage found seal withNano magicand apply nano Bond coat.Open the cracks by making ‘V’ groove, filling cracks with Nano Crack Filler.c) Aplly Nano carbon baesed shorter chain Nano Bond Coat d) Providing and applying Nano Water Base Water Proof compound one coats after surface preparation using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particleswith inhibiting characteristics having bacteria killing rate above 98% and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 75degree , permeable type with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT.e) If ant crack found open and fill the crack with nano carbon base filler and bond coat.and use nano wall filler to reduce the undulation.f) Apply Nano high penetration Bond coat two coat.g) Providing and applying Nano Barrier CoatPaint/ Nano Water Base Water Proof Paints 2 coats over screed concrete using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particleswith inhibiting characteristics having bacteria killing and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 750 , with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT per coat.h) Guarantee for the items ser No 16 & 17: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of ten (10) years in favour of the GE. A sum equivalent to 2.5% ( Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor\"s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer |
| 17 | M&L A glass fibre reinforced elastomeric liquid applied waterproofing membrane. Asian Paints SmartCare Damp Proof or equvalent upon curing, forms a thick, seamless, durable membrane thus offering ultimate waterproofing complete as per manufacturers instructions work shall be executed upto G+5 storey bldg with necessary steel scaffolding as required complete all as specified. Note- The work will be carried on chajja upto G+5 storey blgd with scaffolding all rates includes in it |
| 18 | M&L for Glazed ceramic tiles in vertical surface 600x 300x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:3) complete all as specified and as directed. |
| 19 | M&L for 18-20mmthick coloured granitestone work Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite. |
| 20 | Taking up or down 20 mm dia GI tubing and connections including cleaning for re-fixing or removal to store in any position upto G+5 storey bldg complete all as specified. |
| 21 | Taking up or down 15 mm dia GI tubing and connections including cleaning for re-fixing or removal to store in any position upto G+5 storey bldg complete all as specified. |
| 22 | Supplying and laying of CPVC 25 mm OD pipes SDR 11 & Plain/ Brass CPVC SDR 11 fittings as required on walls/ceiling or laying in floors upto G+5 storey bldg complete, all as specified. |
| 23 | S&F 20 mm dia GI tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc as in horizontal or vertical surfaces upto G+5 storey bldg complete, all as specified. |
| 24 | S&F 15 mm dia GI tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc as in horizontal or vertical surfaces upto G+5 storey bldg complete, all as specified. |
| 25 | Demolition and breaking up drain pipesalt glazed ware, AC, PVC/CI or reinforced concret pipes internal dia of pipe 100mm /75mm |
| 26 | S&F 100 mm bore sand cast irondrain waste/vent pipes fixed to walls or floor jointed with lead jointsincl dismantling of old cast iron drain,waste, vent pipe of any description . |
| 27 | S&F 75 mm bore sand cast iron drain waste/vent pipes fixed to wall, floor jointed with cement joints incl dismantling of old cast iron drain,waste, vent pipe of any description. . |
| 28 | M&L Cast irondoorbends of 75 mm dia |
| 29 | M&L Cast iron doorbends of 100 mm dia |
| 30 | M&L Cast iron branch pieces , tee equal or unequal spigot or socket type or with parallel branches to 75 mm dia pipe fitted with access door complete all as specified by Engineer-in -Charge . |
| 31 | M&L Cast iron branch pieces , tee equal or unequal spigot or socket type or with parallel branches to 100 mm dia pipe fitted with access door complete all as specified by Engineer-in -Charge . |
| 32 | Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified. |
| 33 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, and refixing in same opening complete all as specified. |
| 34 | S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 35 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 36 | S & F Factory made solid PVC wire gauged/ glazed door and window shutter 30mm(styles)consisting of frame made out of MS tubes for top and bottom rail, MS frame shall becovered with heat moulded prelaminated PVC C channel having a prelam PVC sheetstrip of 20mm with stuck inside with solvent cement for stiles and prelam PVC sheet for top, lock and bottom rail on either side and as gap insert for top rail and bottomrail. The wire gauge shall be stainless steel alloy wire cloth 0.36mm nominal dia of wire and average aperture 1mm, wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tube and wire gauge shall be stretched to tightenfirmly complete all as specified and directed. |
| 37 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made”. |
| 38 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headedcounter sunk S.S screws, all as per direction of EngineerIn- Charge.(Note: stainless steel butt hinges shall be paid separately under relevant item). |
| 39 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets. |
| 40 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 41 | S&F double rebated, Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 42 | Providing 35mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item |
| 43 | S&F 100 mm long(size) butt hinges, stainless steel, complete all as specified. |
| 44 | S&F in repair 200mm aliminium barrel tower boltof extruded section, complete all as specified. |
| 45 | S&F Aluminium alloy, anodised,200 mm sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded msections or cast-aluminium alloy and fixed complete all as specified. |
| 46 | S&F 150 mm size stainless steel AISI 304 grade fancy type handlecomplete all as specified and directed. |
| 47 | S&F in repair PVC valve less symphonic action type flushing cistern low level 10 ltr capacity (ISI marked) white with inlet ball valve float and handle including brackets complete all as specified and directed”. |
| 48 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 49 | S&F in repair PVC connection pipe of 15mm x 600mm longwith 2 Nos brass check nuts with washers, complete all as specified. |
| 50 | S&F in repairs vitreous chinaware wash hand basin flat backwith fullpedestalofsize 550mm x 400mm complete including, CP Waste coupling ,waste pipe ,complete fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed by Engr in charge. |
| 51 | S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified |
| 52 | S&F in repair fancy type brass chromium plated soap dish, complete all as specified. |
| 53 | S&F in repair CP grating 125mm dia, complete all as specified.(with hole or without hole all as directed by Engr-in-Charge) |
| 54 | S&F in repair fancy type 15mm dia brass chromium plated quarter turn basinmixer with braided hose for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified. |
| 55 | S&F in repair15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. |
| 56 | S&F in repair fancy type 15mm dia chromium plated quarter turn fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as directed. |
| 57 | S&F in repair fancy type 600mmx450mm bevelled edge mirror of selected quality glass mounted on 4mm thickand rectangular shape and fixed to wooden plugs with chromium plated brass screw and cupwashers, all as specified. |
| 58 | S&F in repair fancy type chromium plated quarter turn brass angle valve type suitable for 15mm bore pipe complete all as specified |
| 59 | S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified . |
| 60 | S&Fin repair fancy type stainless steeltowel racksize 600mm X 300mm including apair of brass bracket |
| 61 | S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 910 mm x 460 mm with bowl size 410mm x 330mm x 160 mm including taking out existing sink with waste fittings complete all as specified. |
| 62 | S & Fin repairs ofPVC knobs/Lattu for drapery rod or cupboard suitable colour suitable ISI markedAs per sample |
| 63 | S & Fin repairs ofS S Bracket suitable for drapery rod with nuts & bolts. As per sample |
| 64 | S&F min wall thickness 1.65 mm Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia of approved qualityincl taking down old pelmet complete all as required and directed. |
| 65 | S&F in repair bib tap, cast copper alloy chromium plated, screwed down high pressure with crutch of butter fly handle fancy type CP for 15 mm bore diacomplete all as specified and directed. |
| 66 | S&F in repair vitreous china squatting pan of orissa pattern long pan size580 x 440 mm white with \"p\"or \"S\" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. |
| 67 | M&L for Cleaning by disconnecting of water tank, duly removing all scale, dirt or mud, fungus etc and washing and flushing the tank with chlorine water for the capacity of tanks exceeding 250 Ltr but not exceeding 500 Ltr of RCC or PVC tanks including writing the letters on PVC or RCC tank as cleaned on duly mentioning date of cleaning with paint, hosting, reconnecting and refixing in position for roof treatment portion complete all as specified and directed by Engr-in-charge. Note: While cleaning any parts of the water tanks was broken / damaged the same shall be replaced by the contractor without any extra cost to the department |
| 68 | S&F in repairs triple layer rotational moulded polyethylene water storage tank (cylindricalvertical with closed top) of White colour hoisted and jointed in position including dismantling of tanks all as specified in SSR Part-I of 1000 ltr capacity complete all as specified and directed by Engr-in-charge. |
| 69 | S & F for bath room vanity unit of overall size 580x400x700mm (approx)with multiple cabins with outside openable two shutter made of water proof coating/items/with two nos of 100mm stainless steel handle with hinges and auto lock and 16-18mm thick black polish granite with counter typeTable Top while ceramic basin of Size: 42x42x15 cm table mouted type including cuplink and waste pipe with stainless steel bottle trap of 32mm size with 250mm &long flexible tube & wall hook with NRV (Make of basin Jaguar model JDS-WHM-25911 or Hindware cat No 91238 or cera cat part No S2020153, kohler Cat No K-31459IN-0), bottle trap and all fittings to proper functional condtion all as specefied and directed |
| 70 | Dismantling of floor of size exc 1.5 Sqm and not exceeding 5.00 Sqm mtr for EWC water closetand removing out the cinder/concrete from sunken portion, , grinding any sharp edges etc all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area of Each WC portion is n.exc 5.00Sqm each.(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.(h) 72 hrs Ponding test shall be carried out for sunken treatment before payment. |
| 71 | Dismantling of floor of size not exceeding 1.50 Sqm mtr for EWC water closetand removing out the cinder/concrete from sunken portion, , grinding any sharp edges etc all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area of Each WC portion is n.exc 1.50Sqm each.(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.(h) 72 hrs Ponding test shall be carried out for sunken treatment before payment. |
| 72 | Schedule of Credit |
