|
| 1 | Demolition of brick work built in cement mortar in any description and position, upto G+5 storey bldg complete all as specified.. |
| 2 | Brick work with old size bricks straight or curved on plan exceeding 6 metre mean radiusbuilt in cement mortar 1:6 (1 cement : 6 coarse sand), upto G+5 storey bldg complete all as specified. |
| 3 | All as per serial item No 2 but except bricks, all as specified. (Servicable bricks retrieved from Serial Item No 01 shall be used).upto G+5 storey bldg complete all as specified. |
| 4 | M&L for preparation of old decoreated/undecoreatedexternal wall / Ceilingapplyingtwo coats of Oil bounddistemper by spray gun/ spray machine up to 5 storey bldg complete all asspecified and all as directed by Engr- in-charge.Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes.2. Material shall be procured from manufacturer and work shall be got executed through authorised applicator. Note rate quoted up to G+5 bldg including scaffolding |
| 5 | Material and labour for preparation of old plastered surfaces of wall to obtain clean, dry, and free of wax, grease, oil, loose or peeling paint, other foreign materials, etcs and applying one coats of High Penetration, water resistance, anti bacterial, Nanotechnology based Premium Waterproof Nano Cement Paint having zero VOC complete all as specified & directed.Note : Application shall be through Smart Painting tools as per Contract Conditions. |
| 6 | M&L for complete removal of existing treatment from external surfaces of wall by mechanised sander ofmakes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible complete all as specified and all as directed by Engineer in charge and Applying two coats ofweather proofing exterior emulsion paint byspray gun/ spray machine incl one coat of primer up to 4 story bldg complete all asspecified and all as directed.Note for items ser No 6, 7, 8, 15 & 16:- (i) Rate quoted up to G+4 bldg including scaffolding.(ii) The work shall be executed through authorised applicator.(iii) Authorized applicator shall be approved by GE before starting of work.(iii) All materials shall be procured directly from manufacture. The purchase voucher shall be produced to the Engr-in-Charge shall be deface the original purchase voucher(iv) MoU with authorized applicator will be submitted successful L1bidder after opening of Financial Bid within a fixed time frame of 7 days otherwise tender will be cancelled.(v) A guarantee amount of 2.5 % of contractor of work done will be retained for 5 years of the completion of work. |
| 7 | M&L for complete removal of existing treatment from external surfaces of wall by mechanised sanderor equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible complete all as specified and all as directed by Engineer in charge andApplying one coats ofweather proofing exterior emulsion paintbyspray gun/ spray machine incl one coat of primer up to 4 story bldg complete all asspecified and all as directed. |
| 8 | Material and Labour for applying 02coats of 100% Nanotechnology based Nano water base high-performance, premium acrylic exterior anti carbonation emulsion paint with unique chemical composition of finest quality (using AIR-LESS PAINT SPRAYER) having VOC less than 38.40 gm/litre (Company Depot Tinted) and durable, water repellent, UV resistant, fungus/ algae/ bacteria resistant, thermally insulating, elastomeric, etc including priming coat of exterior nano primer applied @ 70-80 Sqft per ltr, over wall surfaces by using AIR-LESS PAINT PRIMER SPRAYER including preparation / levelling of old surface of wall using manual sand papers (where reqd) of approved grade complete all as specified and directed by Engr-in-Charge. |
| 9 | All as per item No 8.00 here-in-before but 01 coat on existing surfaces |
| 10 | Taking down cement plaster on brick walls, or stone walls / ceilings etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.Note rate quoted up to G+5 bldg including scaffolding. |
| 11 | Material and labour for rendering 15mm thick on fair face of brick or concrete surfaces in CM 1:4 , finished even and fair without using extra cement and incl highly stretchable, durable and hydrophobic, Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder @ 1% of cement content complete all as specified and directed.Note : Elastomeric Hydrophobic Powder/admixture (EHP) shall be measured and paid as Supply only in respective item. |
| 12 | Material and labour for rendering 5mm thick on fair face concrete surfaces in CM 1:3, finished even and fair without using extra cement and incl highly stretchable, durable and hydrophobic, Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder @ 1% of cement content complete all as specified and directed.Note : Elastomeric Hydrophobic Powder/admixture (EHP) shall be measured and paid as Supply only in respective item. |
| 13 | M&L for applying of exterior wall care putty on newly/old plastered walls of 2-3mm thick including preparing the surface with even and smooth complete all as specified and directed. Note : 1. Wall putty to be procured from manufactures directly. 2. Bidder should consider the Cost of scaffolding in painting item. Seprate payment for scaffolding will not be paid to the contrator. |
| 14 | Material and labour for preparation of old/new plastered surfaces and applying Nanotechnology based Nano Putty is white cement based product with dispersible polymer and functional additives for application on interior rough plasters to give a smooth surface and will form base for paint finish for interiors of the building, applied in 02 coats of total thickness 1.5mm @ 1.2 kgs/sqm complete all as specified. |
| 15 | M&L for preparation of newly plaster surface of wall / Ceiling surfaceapplyingtwo coats of weather proofing exterior acrylic emulsion paint by spray gun/ spray machineincl one coat of primerup to 5 storey bldg including scaffoldingcomplete all asspecified and all as directed by Engr- in-charge. |
| 16 | M&L for preparation of newly plaster surface of wall / Ceiling surface for applying two coats of 100% Nanotechnology based Nano water base high-performance, premium acrylic exterior anti carbonation emulsion paint with unique chemical composition of finest quality (using AIR-LESS PAINT SPRAYER) having VOC less than 38.40 gm/litre (Company Depot Tinted) and durable, water repellent, UV resistant, fungus/ algae/ bacteria resistant, thermally insulating, elastomeric, etc including priming coat of exterior nano primer applied @ 70-80 Sqft per ltr, over wall surfaces by using AIR-LESS PAINT PRIMER SPRAYER including preparation / levelling of old surface of wall using manual sand papers (where reqd) of approved grade complete all as specified and directed by Engr-in-Charge. |
| 17 | Material & labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint completeall as directed by the Engr-in-Charge. |
| 18 | Material and labour for applying one coat of synthetic enamel paint on old painted steel and ironsurfaces of any description over 10 cm in width or girth includingnecessary preparation of surfaces. |
| 19 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and as directed |
| 20 | M&L for 595mm to 605mm x 595 mm to 605 mm x7-8 mm rectified coloured ceramic tiles, joint free, as approved by Garrison Engineer in floors over 15mm thick screed bed in CM 1:6,G+5 storey bldg complete all as specified. |
| 21 | M&L for 595 mm to 605 mm x 100 mm x 7-8 mm thick rectified coloured tiles as skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4G+5 storey bldg complete all as specified.. |
| 22 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white oroloured cement to match laid over and including 15mm thick screed bed or bedding layers in cement mortar ( 1:6) G+5 storey bldg complete all as specified. |
| 23 | M&L for coloured glazed ceramic tiles 300x450x6 to 8mm or (300x600mm)x8 to 10mm thick on vertical surfaces on skirting /dados and risers to steps laid and overincluding rendering 10mm thick cement mortar in CM 1:4G+5 storey bldg complete all as specified. |
| 24 | M & L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water.All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint all as specified and directed by Engr-in-charge |
| 25 | Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land. |
| 26 | Surface dressing not exc 15 cm deep in soft / loose soil complete all as specified and as directed by Engr in charge |
| 27 | M&L 50 mm thick PCC (1:4:8)type D 2 (40mm graded stone aggregate)as in sub base, complete all as specified. |
| 28 | M&L Sand filling (sand cushioning) under floors or in foundation incl watering and consolidation all as spd and directed. |
| 29 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment all as spd and directed |
| 30 | S & F in repairs 100 mm dia cast iron (spun pipe) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc complete all as specified by Engineer-in-Charge Note : For pipes fixed on walls to be suitably clamped using stack clamps to maintain 10 to 15 cm distance from the wall (rates inclusive in this item) of appropriate size @ 2 m apart for height of pipe) and all the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5 |
| 31 | S & F in repairs 75 mm dia cast iron (spun pipe) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc complete all as specified by Engineer-in-Charge Note : For pipes fixed on walls to be suitably clamped using stack clamps to maintain 10 to 15 cm distance from the wall (rates inclusive in this item) of appropriate size @ 2 m apart for height of pipe) and all the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5 |
| 32 | S & F in repairs 100 mm dia cast iron (Cast iron floor trap, with grating including jointingto waste pipe fixed in cement concrete type B-1 (1:2:4)complete all as specified by Engineer-in-Charge |
| 33 | S & F in repairs75mm dia cast iron (Cast iron floor trap, with grating including jointingto waste pipe fixed in cement concrete type B-1 (1:2:4)complete all as specified by Engineer-in-Charge |
| 34 | S & F in repairs Cast iron T of 100mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc complete all as specified by Engineer-in-Charge Note :- All the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5 |
| 35 | S & F in repairs cast iron Bends of 75mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc complete all as specified by Engineer-in-Charge Note :- All the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5 |
| 36 | S & F 75mm diabranch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovalaccess door, complete all as specified and directed.Note :- All the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5 |
| 37 | Taking up or down 20 mm GI tubing medium grade with all fittings and connections incl cleaning for refixing or removal to store complete all as specified. |
| 38 | All as per item no 37 here-in-before but dia of GI pipe is 15mm. |
| 39 | S&F 20mm dia GI tubing medium grade with all fittings and connections fixed to wall or ceiling or laid on floor etccomplete all as specified an directed. |
| 40 | All as per item no.39 here-in-before but dia of GI pipe is 15mm. |
| 41 | Cutting chases,pinning for concealed water tubing andmaking good to facing where required and pointing in cement mortar 1;3 ,cutting exc 10cm but n.exc 20cm girth complete all as specified and directed. |
| 42 | S&F 500 ltr capacity rotational moulded polyethylene water storage tanks triple layer(cylindrical vertical with closed top) in white colour hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed incl Dismantling of PVC water tanks of exc 250 litres and n.exc 500 litres capacity of any condition or type incl complete all as specified and directed. |
| 43 | M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. |
| 44 | S & Fin repairsvitreous China coloured European type WC with \"P\" or \"S\" trapand Seat cover for 100 mm bore, including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete all as specified and directed by Engineer-in-Charge. |
| 45 | S & F in repairs vitreous chinaware coloured wash hand basinofsize 540mm x 400mm complete including, CP Waste coupling , PVC waste pipe ,complete fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed by Engr in charge |
| 46 | S&F in repair vitreous china squatting pan of orissa pattern long pan size580 x 440 mm white with \"p\"or \"S\" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe)complete all as specified and directed by Engineer-in-Charge. |
| 47 | S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle,fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed by Engineer-in-Charge. |
| 48 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium platedlong body with flange complete all as specified and directed by Engineer-in-Charge. |
| 50 | S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F in repair PVC connection pipe of 1/2\"x18\" size with 2 Nos brass check nuts with washers, complete all as specified and directed by Engineer-in-Charge. |
| 52 | Taking down shutter Not.exc 2 sqm each of any description complete all as specified. |
| 53 | Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) |
| 54 | M&L 19mm thick MDF boards, grade 1 quality, exterior grade, commercial type, shutter of cupboard/kitchen cup board/loft board complete all as specified and directed. |
| 55 | Factory made signle extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/ cum, screw withdrawl strength of 2200N (Face) and 1100 N (edge), minimum compressive strengthy of 58N/ mm2, modules of elasticity 900 N/ mm2 and resistance to spread of flame of being termite / borer proof, water/ moisture proof and fire retardant and fixed with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/ lugs or SS dash fasteners shall be paid for separtely).Note: For WPC solid door/ Window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but not extra payment on this account shall be made. |
| 56 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdral strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistace to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction Engr-in-Charge. |
| 57 | S&F butt hinges medium weight, cold rolled SS and fixed size of hinge 100mm complete all as specified. |
| 58 | S&F 150mm long anodised aluminum barrel tower bolt, extruded section complete all as specified. |
| 59 | S&F aluminum alloy handles extruded fabricated type, anodised of 125 mm size complete all as specified. |
| 60 | S & F false celling using plain galvanised steel celling system consisting of 600X600 mm lay in tiles of pre coated glavinished steel sheet 0.50mm thick in white or coloured to be laid on grid system with 15mm wide T section of size 600X45X15 mm flanges having rotary stiching on the main runner. The main runner spaced 600mnm centre flush fitting 600mm long cross tees to be interlocked between runner at 600 mm center to from 600X600mm moulule perimeter trim to wall angle of size 3000X45X15 mm secured to wall and including suspension system as per manufacture instruction complete all as specified and directed. |
| 61 | M&L for 8.5mm thick prelam pvc coloured profile panelling with all thickness of 1.25 mm each pannel 250mm wide with interlocking joints, coloured ,shed, pattern/designs approved fixed to wall or celling with solvent/screw including similar pattern moulding at all around of opening , junction including dismantling complkte all as per manufacture instruction all as per specified and directed |
| 62 | S&F for Drappery curtain rods decorative type stainless steel 25mm nominal dia of approved quality (Make-VISTA) (3mm wall thickness) including fixing of two number decorative brackets fixed in brick/concrete wall, two number of latto on both end s of curtain rods, complete all as specified and directed by Engr-in-Charge. |
| 63 | Schedule of Credit |
