|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from frames) area not exceeding1.50 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4.00 Sqm each complete all as specified and directed |
| 3 | Demolition of existing sunken treatment upto height of 90 cm including plaster and M&L for water proofing treatment on existing sunken floor/wall with the following specification complete all as specified and directed-(a) Laying of 50mm thickPCC 1:2:4 type B-1 with maintaining slopes (b) 15mm thick (average) plaster in CM 1:3 on sunken floors and walls using WPCinas per manufacturer instruction(c) Apply one coat of bituminous primer @ 0.5 Kg/ Sqm on walls and floor conforming to IS 3384-1965 on prepared surface till the surface is properly impregnated (d) Apply hot bitumen 85/25 grade @ 1.2 Kgs/Sqm confirming to IS 702-1988 (e) Laying polymeric water proofing memberance weight not less than 3.0 Kg/Sqm as per manufacturer instructions confirming to IS(f) One spout of 40mm bore GI pipe length 0.45 m shall be provided in sunken floor (g) Filling of sunken floor with PCC 1:5:10 type E- 2 (using 40 mm graded stone aggregate) upto height directed (h) fixing of trap as per site requirement |
| 4 | Dismantling of floor hearth or wall tiling, kota stones etc including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | S&F Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over & including 15 mm thick screed bed or bedding layer of CM 1:6 complete all as specified and directed. |
| 6 | M&L for machine cut kota stone slab as a single piece in stair case tread / riser of steps 20-25mm thicklaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 7 | M&L machine cut kota stone slab as a single piece in stair case skrting /dado20-25 mm thicklaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 8 | M&L 20 mm th Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 20 mm th screed in CM 1:6 Complete all as specified and directed. |
| 9 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layer of cement (1:6) complete all as specified and directed. |
| 10 | M & L forGlazed ceramic tiles in vertical surface 450 x 350x 7/350x250x7 mm thick coloured tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match,over 10 mm thick rendering on fair faces of concrete surface ofverticle in CM (1:4),shade & design as approved by EIC/GE, incl rubbish off the primises etc Complete all as specified and directed. |
| 11 | M&L for coloured chequred cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floorwith white cement and pigment over and including screed bed of 15mm thick in CM (1:6 ) etc complete all as specified and directed. |
| 12 | Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 13 | M&L Brick work using old size sub class \"B\" bricks straightor curved on plan exc 6 m mean radius built in cement mortar( 1:6 ) complete all as specified and directed. |
| 14 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Complete all as specified and directed. |
| 15 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) |
| 16 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,Complete all as specified and directed. (Note: Stainless steel butt hinges shall be paid separately) |
| 17 | S &F factory made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain wire mesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cum an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws all as per directed.Note- (i) Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed (ii) Stainless steel butt hinges shall be paid separately) |
| 18 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm double side prelam PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening complete all as specified and directed |
| 19 | S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face complete all as specified and directed |
| 20 | S&F factory made Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 Noper leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per TD complete all as specified and directed Note : (i) Glass, and painting shall be measured and paid separately under appropriate item.(ii)Stainless steel butt hinges shall be paid separately) |
| 21 | S&F factory made Steel Window 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf without sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 Noper leaf (e)Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm welded to FI frame and 100mm spacing of guard bar as per shown on drawing complete all as specifed and directed. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc |
| 22 | Ditto all as item No 21 above but for ventilator complete all as specifed and directed. |
| 23 | S & F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples,wodden beads to steel windows/wodden doors complete all as specified and directed |
| 24 | S & F 3 mm thick sheet glass, ordinary quality and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed. |
| 25 | M&L for two coat of synthetic enamel paint including preparation of old steel painted surfacesover 10 cm in width or girth,not otherwise describedcomplete all as specified & directed., |
| 26 | S&F 150 mm aluminium anodized, barrel tower bolts of extruded section complete all as specifed and directed. |
| 27 | S&F 250 mm long aluminium alloy anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 28 | S&F aluminium alloy handle casttype anodized of size 150mm long complete all as specified and directed. |
| 29 | S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.. |
| 30 | Dismantling boarding as in kitchen cupboard, drawers, cupboard incl chowkhats etc. fixed in any position complete all as specified and directed. |
| 31 | S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 12mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed. |
| 32 | M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type board of size 6mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 33 | Taking down cement plasterany description on brick or stone work etc including taking out joints hacking for key scrubing down with water complete all as specified and directed |
| 34 | M&L rendering 15 mm thickin cement mortar (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed. |
| 35 | M & L for preparation of new plastered surfaces of walls and applying two coat of oil emalsion distemper white or any tint over a coat of primer complete over prepared surface of 1mm thick wall care putty complete as specified and directed. |
| 36 | M&L rendering 15 mm thickin cement mortar (1:4) on fair faces of brick work or concrete surfaces to be finished even and fair without using extra cement with using WPC (WPC shall be measured and paid seperately) complete all as specified and directed . |
| 37 | M & L fortwo coats of cement based paintover a coat ofprimer on new plastered wall surfaces with 1mm thick wall care putty including preparation complete all as specified and directed. |
| 38 | M&L rendering 5 mm thickin CM(1:3) as in ceiling or concrete surfaces to be finished even and fair without using extra cement complete as all specified and directed |
| 39 | Supply only WPC (Water Proofing Compound) ISI Marked complete all as specified and directed |
| 40 | M&L for preparation of newly plastered/concrete surfaces & applyingtwo coats white wash on ceiling complete all as specified and directed. |
| 41 | M & L for complete removal of existingtreated surfaces andmaking surfaces smooth and applying two coats of Oil emalsion distemper over and including a coat of primer over and including prepared surface of 1mm thick wall care putty complete as specified and directed |
| 42 | M & L complete removal of existing treatment and apply two coat of cement based paintover a coat of primer on oldwall surfaces including 1mm thick wall care putty and preparation ofsurfaces complete all as specified and directed. |
| 43 | S & F 1000 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSRPart I complete all as specified and directed. |
| 44 | S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum wt 20mm - 210 gms) complete all as specified and directed |
| 45 | S&F Vitreous china premium (Ist quality) wash down water cloest EWC white /off White( closed pattern incl all necessory accessories like rag bolts / gel gasket, white seat cover , Jet etc complete all as specified and directed |
| 46 | S & F in repairs vitreous china squatting pan orissa pattern long pan size 580 mm x 440 mm white with spun pipe ‘P’ or ‘S’ trap including lead joint and CI spun branch piece , front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed. |
| 47 | S&F in repair PVC valveless symphonic action type flushin cistern 10 litres capacity low level white inlet, ball valve,float valves & handle including, brackets, flush pipeincluding all joints and making good to the floors complete all as specified and directed |
| 48 | S&F in repair 15mm bib tap cast copper alloy (Chromium plated) with crutch or butter fly handle screwed down, screwed for iron pipe or brass firul and fixedcomplete all as specified and directed.. |
| 49 | S&F in repair PVC connnection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed. |
| 50 | S&F in repair600 mm x 450 mm beveled edge mirror of selected quality glass mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washerscomplete all as specified and directed. |
| 51 | S&Fin repair 15mm stop valve/ angle valve cast copper alloy, fancy type, chromium plated with high pressure with crutch butterfly handle screwed both ends for iron pipe or for unions and fixedcomplete all as specified & directed. |
| 52 | S & F in repair fancy type 125mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed.Make F7010305 of Cera, Hindware Model No F160006, Parryware Model No T9985 A1 complete all as specified and directed |
| 53 | S&Fin repair 15 mm bore concealed Stop stop cock fancy typescrewed down for iron pipe and fixed to 15mm bore pipecomplete all as specified and directed. |
| 54 | S&F in repair PTMT grating doom 100/125mm dia with or without waste hole etc complete all as specified and directed. |
| 55 | S&F in repair sinks made of stainless steel 1 mmthickmatt finish ISI Markedkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 56 | S & F300 mm ordinary rat tail made of MS rod pattern spring including roller and roller plate complete all as specified and directed. |
| 57 | S&F in repair Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets , 32 mm PVC waste pipe, 32 mm PTMT Waste coupling and incl 15 mm dia pillar taps fancy type chromium plated complete all as specified and directed |
| 58 | S & F continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when opened) 30 mm etc complete all as specified and as direced. |
| 59 | Taking up or down 15 mm bore dia GI steel tubing and connection including cleaning for re-fixing or removing ot store. |
| 60 | Taking up or down 20 mm bore dia GI steel tubing and connection including cleaning for re-fixing or removing ot store complete all as specified and directed |
| 61 | S&F GI tubing medium grade 15 mm bore with all fitting & fixed to wall & ceiling or laid in floors complete all as specified and directed |
| 62 | S & F for 20 mm bore medium grade galvanised steel water tubing with all fittings and fixed complete to wall or ceiling or laid in floors complete all as specified and directed |
| 63 | S & F in repair Gun metal, globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed |
| 64 | Demolition mud in roofs any thickness, including and leeping(whether full thickness removed or only a part thereof)including tarfelt etc and removing, cleaning of old roof debris by any means out sid of defece land complete all as specified and directed |
| 65 | M & L forproviding PCC1:3:6 type C-1using 20 mm graded stone aggreagte as in padding/levelling course of average thickness not exceding 50 mm including making kerbs at wall and roof junction complete all specified ad as directed |
| 66 | M & L for preparation ofnewly plastered surfaces of roof including cleaning the surface by using wire brush/pressure hose and applying high performance polyurethane liquid membrane roof casting cold in two coats @ 1.5Kg/Sqm with spray/brush an elogation of 300% to 700% and tensile strength not less than 3 N/Sqm as per ASTM D412 and ASTMD2370, crack bridging ability of 3.5mm as per ASTM C 1305, shore a hardness of not less than 60 as ASTMD 2240. The item includes epoxy prime applied @ 0.15 Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer\"s instruction and sound engineering practice complete all as specified and directed.Note - work shall be executed by authorized applicator of manufacture as per manufacturer\"s instructions and roof height upto double storey building complete all as specified and directed |
| 67 | M&L cement concrete type B-1, 1:2:4 (using 20 mm grded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed |
| 68 | S & F in repairs stainless steel decorative curtain rod of 25 mm bore with 1mm thickincluding brakets 02 nos &finalie 02 nos) etc complete all as specified and as directed. |
| 69 | Demolition of cement concrete in ground floor and paving not exceeding 15 cm thickness above or below ground level complete all as specified and directed |
| 70 | M&L for 50 mm thicknessPCC 1:3:6 type C1 using 20mm stone aggregate in plinth protection including finishing smooth without using extra cement complete all as specified and directed |
| 71 | S&F in repair utencil plate rack 1 mm thick of size 60 cm x 60 cm x 25 cm,of pattern as approved by engineer-in-charge, fixed to wall by means of four nos rawal plugs, complete all as specified and directed. |
| 72 | Demolition and breaking up drain pipes 100 mm dia (Salt glazed ware, AC / PVC or reinforced concrete) etc including fitting complete all as specified and directed. |
| 73 | S&F in repair 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with new clamps complete all as specified and directed. |
| 74 | S&F in repair 75 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with clamps complete all as specified and directed |
| 75 | S&F in repair110mm bore PVC (SWR) floor P trap,including provision of PVC garting 110mm Size complete all as specified and directed. |
| 76 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor 110 mm bore pipe with clamps complete all as specified and directed. |
| 77 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor 75 mm bore pipe with clamps complete all as specified and directed. |
| 78 | S & F PVC (SWR) bends any radius for 110 mm bore pipecomplete all as specified and directed. |
| 79 | S & F PVC (SWR) bends any radius for 75 mm bore pipecomplete all as specified and directed. |
| 80 | S&Fin repair 75mm PVC (SWR) floor trap, plain with grating including jointing complete all as specified and directed. |
| 81 | S & F MSjoist channel , angle or Tee section MS tubes, flats square bars etcfixed indepently or framed or without connecting plates, (cut to ordinary lengths i.e. within 20mm of the length indicated) trusses etc any type framing including purlins and rafters etc complete all as specified and directed.(Fe 410-W Gde E-250 Quality A) |
| 82 | S&F in repair wire netting of galvanised steel wire 1.40mm dia and mesh size 25mm fixed with tinned tacks of wire staples complete all as specified and directed |
| 83 | S & F fancy type glass corner 300 mm radius of 6 to 8 mm thick toughened glass with CP railing fixed with fancy type screws complete all as specified and directed. |
| 84 | S&F in repair tubular towel rail 20mm dia \"D\" type 60cm long between flange, brass chromium plated including bracket fixed complete all as specified and directed. |
| 85 | Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such asswitches,socket, ceiling rose,lamp holder,pendants, bracket, led fittings and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified. |
| 86 | Taking down copper/aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed. |
| 87 | Material and labour for concealed point wiring for one light/fan/exhaust/bell point controlled by one switch (using red, black and green etc colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area)single core (FRLSH) PVC insulatedunsheathed and multi strand copper conductor cable 1100 volt (ISI marked)drawn through andincludingPVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken modular terminal box (Min 60mm deep, suitable size) concealed in wall, flush to surface for mounting of switches / socket / regulator/ call bell etc, including provn of 1.5 Sqmm single core (FRLSH) PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3)complete all as specified and as directed. Note- Switch, socket, Regulator & White cover plate of different module should be measeured & paid separately. |
| 88 | All as per item 87 here in before but for One 6 Amp socket point with switch on an independent board with 2.5 Sqmm (FRLSH) copper conductor cable complete all as specified & directed |
| 89 | All as per item 87 here in before but for One 6 Amp socketpoint with switch on same board complete all as specified & directed |
| 90 | All as per item 87 here in before but for One 15/16 Amp socket point with switch on an independent board with 2.5 Sqmm (FRLSH) copper conductor cable (for power /geyser point) complete all as specified & directed |
| 91 | All as per item 87 here in before but for one 16 Amp socket point with switch on independent board with 4.0 Sqmm (FRLSH) unsheathed copper conductor single core multistranded complete (for AC point) all as specified & directed. |
| 92 | All as per item 87 here in before but for One light point controlled by twoway switches on an independent board with cables 1.5 sqmm (FRLSH) copper conductor complete all as specified & directed |
| 93 | S&F modular switch 1 way 6A,1 Module complete all as specified and directed. |
| 94 | S&F Socket modular 6A - 2/3 pin combined 2 Module complete all as specified and directed. |
| 95 | S&F modular switch 2 way 6A,1 Module complete all as specified and directed. |
| 96 | S&F modular switch 1 way 16A, 1 Module complete all as specified and directed. |
| 97 | S&F socket modularr 16A - 2/3 pin combined 2 Module complete all as specified and directed. |
| 98 | S&F white cover plate with frame, 1module complete all as specified and directed. |
| 99 | S&F white cover plate with frame, 3modulecomplete all as specified and directed. |
| 100 | S&F white cover plate with frame, 8modulecomplete all as specified and directed. |
| 101 | S&F modular bell push, 6 Amp, 1 module complete all as specified and directed. |
| 102 | S&F Bell Ding Dong AC 230 volts, single pole complete all as specified and directed. |
| 103 | S&F modular electronic Fan step regulator, 120W - 2 module complete all as specified and directed |
| 104 | S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed. |
| 105 | M&L for sub main wiring with two single core 6 Sqmm FRLSH copper conductor PVC insulated and unsheathed cableincluding PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLSHinsulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. (Note :- Two runs of 6 sqmm FRLSH and one run of 6 sqmm FRLSH copper conductor including PVC conduit shall be measured as one unit length.) |
| 106 | M&L for sub main wiring with two single core 10 Sqmm FRLSH copper conductor PVC insulated and unsheathed cableincluding PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 10 Sqmm FRLSHinsulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. (Note :- Two runs of 10 sqmm FRLSH and one run of 10 sqmm FRLSH copper conductor including PVC conduit shall be measured as one unit length.) |
| 107 | S&F of VTPN DB 12 way suitable for mounting MCCB as Incomer of rating 200 Amp with suitablerated bus bar having IP-43 protection and double metal door concealed in wall including connection with MCCB & MCB as required complete all as specified. |
| 108 | S&F of MCB distribution board SPN 240 Volt 16 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with MCBs as required complete all as specified. |
| 109 | S&F of MCB distribution board SPN 240 Volt 12 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with MCBs as required complete all as specified. |
| 110 | S&F of MCB distribution board SPN 240 Volt 4 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with MCBs as required complete all as specified. |
| 111 | S&F of MCCB 100 Amp, 16KA, 4 Poleincluding complete electricalconnection complete all as specified and directed |
| 112 | S&F of MCB SPN 63 Amp 240 volt \"C\" curve 10 KA complete all as specified and directed. |
| 113 | S&F of MCB SPN 32 Amp 240 volt \"C\" curve 10 KA complete all as specified and directed. |
| 114 | S&F of MCB SP 6 to 32 Amp 240 Volt \"C\" curve 10 KA complete all as specified and directed. |
| 115 | S&F of MCB SP 63 Amp 240 Volt \"C\" curve 10 KA complete all as specified and directed. |
| 116 | Supply and fixing LED lights fitting 4 feet, 20W, 220V, AC,LED Batten ,extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated electronic driver complete including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose having luminaire lumen >2000 lm complete all as specified and directed. |
| 117 | Supply and fixing LED lights fitting 2 feet, 20W, 220V, AC,LED Batten ,extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated electronic driver complete including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose having luminaire lumen >1000 lm complete all as specified and directed. |
| 118 | S&F LED decorative wall light fixture made up of Polycarbonate body, suitable for 09W TU retrofit LED including LED bulb 09 Watt of colour temp 3000K & luminaire lumen >1000 lm complete all as specified and directed. |
| 119 | S&F of square slim surface mounted LED down lighter of capacity 15 watts, 240 volts, white powder coated pressure die cast aluminium housing and bottom frame with high transmitive LGP technology, high efficiency non yellowing PMMA diffuser, complete with LEDs driver and accessories pre-wired upto terminal block lumens wattage not less than 15 watts, luminaire lumen output >1500 Lm, ingress protection IP-20, ambient temperature 0-450 C driver efficiency more than 85% power factor above 0.95, Surge protection 3 KV multi stage isolated constant current and variable working votlage 150-270 Volts complete all as specified and directed. |
| 120 | S & F building security LED Light 30 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-65 protection and impact resistance of IK 07 for building security purpose with bracket size made of GI pipe medium grade 25 mm dia 1.5 mtr long bend to shape as required and fixing with two nos MS Clamp of size 25x6 mm for fixing of builiding security light fittings completed all as specified and directed. |
| 121 | S & F in repair of Post Top lantern outdoor type 20 watt LED Light AC 50 Hz 230 V for indirect with IP - 65 protection resistant to impact and corrosion free and better uniformly complete all as specified and directed. |
| 122 | S & F of heavy duty exhaust fan (plastic) complete with louvers shutter,230 V, 50 Hz, 1200 RPM, Copper winding of sweep 250 mm including fixing accessories complete all as specified and directed. |
| 123 | Supply, installation, testing & commissioning of modular kitchen chimney stainless steel body with ducted arrangement for smoke exhaust wall mounted with three step speed control push button having air suction capacity of 1000 CMH, SS baffle filter to enchance air flow complete all as spedified and directed by Engr-in-charge. |
| 124 | Supply and laying cable XLPE Insulated screened PVC bedded, galvanized steel strip armoured service cable pole to building electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete including dismentling of old unserviceable cable all as specified and directed. |
| 125 | Supply and laying cable XLPE Insulated screened PVC bedded, galvanized steel strip armoured service cable pole to building electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 Sqmm 2 core complete including dismentling of old unserviceable cable all as specified and directed. |
| 126 | S & F of 50 mm bore GI Tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS Clapms and nut and bolts/washer complete incl dismentaling old u/s GI pipe of any size complete all as specified and directed. |
| 127 | M&L for sub class \"B\" burnt bricks,laid in trenches for cable protection complete all as specified and directed by Engineer-in-charge. |
| 128 | M&L for sand cushioning with dry local sand for cable protection under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed.Note: Punned thickness will be measured and paid to contractor. |
| 129 | Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any type of soil complete all as specified and directed. |
| 130 | Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any type of soil complete all as specified and directed |
| 131 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed |
| 132 | S&F of SHEET METAL ENCLOSURES WITH SOCKET PLUG TOP AND MCBs for control the AC and Geyser with one single pole MCB 20 Amp complete all as specified and directed. |
| 133 | Taking down of existing ceiling fan of any sweep and refixing the same location duly servicing, painting and starightening of fins complete all as specified and directed.Note :- All ceiling fan will be deposited to MES store after taking down. |
| 134 | Taking down of existing exhaust fan of any sweep and refixing using fashners in the same location duly servicing, painting and starightening of fins complete all as specified and directed.Note :- All exhaust fan will be deposited to MES store after taking down. |
| 135 | Taking down the existing geyser of 25/50 ltrs capacity and re-fixing using fashners in the same location including painting of body and cleaning the tank, replacement of thermostate, heating element, lamp indicator, PVC connection pipe 600mm long (hot & cold)complete all as specified and directed.Note :- All Gysers will be deposited to MES store after taking down. |
| 136 | M&L for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GIearthing wire of size 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI light grade pipe upto test point or upto main switch board, HT/LT equipments, fixing with 02 Nos nuts and bolts and protection pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common saltall around bottom and top. 20 mmbore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type ofsoil, returning filling and disposal of surplus soil to a distance not exceeding 50m,Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat ofred oxide primer, complete all as specified & shown in electrical plate No. 3 ofSSR 2009 (Part-I) complete incl dismantling of old u/s earthing all as specified and as directed by Engineer-in-charge.Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge. |
