|
| 1 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.size as specified by engineer. |
| 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 270 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (make: jindal india) |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work color as specified |
| 4 | 15mm Cement plaster with 1:4 (cement and fine sand) |
| 5 | Provinding and fixing factory made pvc gutter of 150mm wide to provide drainage of the shed area including all fittings used to attach it with purlins of the shed also provide necessary arrangements to drain off water by 75mm pvc pipe to specified drain complete with all fasteners and fittings( payment for 75mm pvc pipe made separately.) |
| 6 | Providing and fixing 75mm pvc drain pipe with necessary fitting(i.e-coupler,bend and tee)including fastening clamps complete. |
| 7 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B |
| 8 | Supplying and drawing the following size FRLS of PVC insulated copper conductor single core cable in the existing surface /recessed steel/ PVC conduit as reqd. |
| 9 | 1x1.5 sq.mm |
| 10 | 2x2.5 sq.mm |
| 11 | 2x4 sq.mm |
| 12 | supplying and fixing following size(20mm/25mm) of heavy class PVC conduit/batten along with all accessories in surface including making good as required. |
| 13 | S/F of suitable size G.I box with modular plate and cover in front or surface in recess including providing and fixing 32A modular socket outlet and 32A modular DP MCB \"C\" curve including ,painting etc |
| 14 | S.I.T.C. 1200mm sweptType fan inclunding necessary fitting and fixing complete Make : atomberg, havells , polycab |
| 15 | chipping of unsound and weak concrete/plaster of average thickness 25mm. |
| 16 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. |
| 17 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 18 | Supplying and fixing of 2\"x2\" recessed/surface mounred LED fitting square shaped luminaire with diffuser suitable including making connection etc. as required at site. (Model No. SM 365C LED 32 6500 PSU OD GR) (Philips) |
| 19 | S.I.T.C. 36W batten type led of approved make phillips |
| 20 | Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment). |
| 21 | Providing and fixing of bamboo scaffolding for repair to plaster |
