|
| 1 | Part A Civil Works |
| 2 | Dismantling aluminium / Gypsum partitions, doors, windows,fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable materialwith in 50 meters lead as directed by Engineer-in-charge. |
| 3 | Providing and fixing Sintex / Bajaj or equivalent make of ISI marked PVC false ceiling (or wall Panelling) on MS rectangular hollow section 38mm x 25 mm fixed to wall with PVC roll plugs and main runner & intermediate section of MS square tube 25 mm x 25 mm duly coated with anticorrosive primer & ceiling panel made out of rigid PVC multichamber hollow plastic section of 6 mm thick as per instruction of Engg-in-charge |
| 4 | P/F Wooden flooring of thickness 12 mm including of fixing materials etc all complete as per instruction of E/I |
| 5 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus ofelasticity 850 N/mm2 and resistance to spread of flame ofClass A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 6 | P/F Wooden laminate flooring sheet of thickness 5 mm over existing stage including of fixing materials etc all complete as per instruction of E/I |
| 7 | Providing and fixing 18 mm thick marine ply of ISI mark including Labour and material as per instruction of E/I |
| 8 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick |
| 9 | Providing and applying smooth stone textured finished 1.5 to 2 mm thick as per manufacturer specifications over old and new plastered surface i.e. scrapping the surface, applying specified primer for surface stabilisation and making necessary pattern there on by trawel / spraying as per architectural drawing and finishing with 2 or more coat of pure acrylic based clear coat paint complete as per direction of E/I on internal surface with necessary scaff holding |
| 10 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said. Old work (one or more coats) |
| 11 | Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade : One or more coats on old work |
| 12 | Carriage of building rubbish by mechanical means including loading unloading And stacking. Lead of 2 km |
| 13 | P & F Polyster Fiber Acoustic wall panel of size 8 x 4 x 9 mm including 6 mm ply as per instruction of E/I |
| 14 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 15 | Providing sills of polished Kadappa stone 25 mm to 30 mm thick, onabed of 1:4 cement mortar including cement float,filling joints with slurry,curing polishing and cleaning etc. complete |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 17 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 18 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 19 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws |
| 20 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 21 | Shifting of chairs / tables etc from the Hall during renovation and refixing / rearranging the same after renovation as per instruction of E/I |
| 22 | Part B Electrical Works |
| 23 | Supplying and erecting HMS PVC conduit 25mm dia. with PVC accessories onwall/ceiling as per specification no. WG-MA/CON. |
| 24 | Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 25 | Supplying and erecting mains with 3x4sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking /insidepole /Busbars o rany other places as per specification No: WG-MA/BW |
| 26 | Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW |
| 27 | Supplying and erecting modular types switch 6A/10A duly erected on provided plate and box with wiring connections complete. |
| 28 | Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. |
| 29 | Supplying and erecting modular type 3pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete |
| 30 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete |
| 31 | Supplying and erecting modular type bell-push with indicator 2 modules6A/10A on provided plate and box with wiring connections complete. |
| 32 | Supplying and erecting unbreakable concealed type modular switch box withdouble mounting plate for 16/18 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 33 | Supplying and erecting unbreakable concealed type modular switch box withdouble mounting plate for 12 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 34 | Supplying and erecting LED Panel Light (600mm X 600mm) Max. 35 Whaving CRCA powder coated housing, polystyrene diffuser having systemlumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80,CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f.>0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of50,000 Hrs at L70B50 including driver, having mounting arrangement with boardfor surface type or spring loaded mounting clips complete with minimum 2 yearswarranty as per specification No. FG-IDF/LED. |
| 35 | Supplying and erecting unbreakable concealed type modular switch box withdouble mounting plate for 2 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 36 | Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulatedwire laid in provided conduit/trunking/inside pole/bus bars or any other placesas per specification no. WG-MA/BW |
| 37 | Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected. |
| 38 | Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI |
| 39 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 40 | Supplying, erecting & commissioning 2 pole RCCB 63A, electromagnetic type with30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. |
| 41 | Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box. |
| 42 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
