|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 4 | Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing complete. |
| 5 | Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering. |
| 6 | 1:4:8 ( 1 Cement: 4coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Extra for providing and mixing water proofing material in cement concrete work @1 kg per 50 kg of cement. |
| 8 | Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7 kg per sqm on damp-proof course after cleaning the surface with brushes and finnal with a piece of cloth lightly soaked in Kerosene oil. |
| 9 | Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 10 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 12 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up to floor five level excluding cost of centering,shuttering, finishing and reinforcement : |
| 13 | 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20 mm nominal size). |
| 14 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level and above plinth level |
| 15 | Thermo-Mechanically Treated bars |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 17 | Foundation,footings,bases of columns etc.and mass concrete |
| 18 | Suspended floors, roofs, landings, balconies and access platform, with water proof ply 12mm thick. |
| 19 | Edgesof slabsand breaksin floor walls under 20 cm wide |
| 20 | Columns, pillars , post and struts (square, rectangularor polygon in plain) |
| 21 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 22 | Stairs, (excluding landings) except spiral-staircases. |
| 23 | Brick work with Ist class common burnt clay F.P.S. (non modular) bricksin foundation and plinth in: |
| 24 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 25 | Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricksin superstructure above plinth level upto floor V level in |
| 26 | Cement mortar 1 : 3 (1 cement : 3 coarse sand) |
| 27 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : |
| 28 | Local best qualityTeak wood |
| 29 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 30 | Local best qualityTeak wood |
| 31 | 35 mm thick shutters |
| 32 | Providing 40x3 mm flat iron hold fast 40 cm long i/c fixingto frames with 10 mm dia. bolts nuts and wooden plugs and embedding to cement concrete block 30x10x15 cm 1:3:6 (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal gauge). |
| 33 | Providing and fixing 75 x 60 mm moulded hand rail in straight lengths complete Uningthou wood. |
| 34 | Providing & fixing 75 mm x 60 mm Uningthou wood scrolls made to suit the moulded hand rails (dia of scrolls to be three times the width of hand rails 75 mm x 60 mm). |
| 35 | Providing & fixing 25mm x 25mm Uningthou wood balusters 25mm x 25mm square, wrought fixed with ends housed(square or splay) to hand rails &treads or strings complete. |
| 36 | Providing & fixing Brass handles with necessary screws etc. complete. |
| 37 | 125mm |
| 38 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : |
| 39 | 300x16x5 mm |
| 40 | Providing & fixing Brass Tower bolts (barrel type) with screws etc. complete. |
| 41 | 250 x 10 mm |
| 42 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement [email protected] kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 43 | Double charge vitrified tile polished finish of size |
| 44 | Size of Tile 600 x 600 mm |
| 45 | Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in colours White, Ivory, Grey, Fume Red,, Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 46 | Marble stone flooring with18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : |
| 47 | Raj Nagar plain. |
| 48 | Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 49 | Marble tiles (polished) Raj Nagar. |
| 50 | 8 mm thick. |
| 51 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 52 | 12 mm cement plaster of mix: |
| 53 | 1:4 (1 cement : 4 fine sand) |
| 54 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 55 | 1:4 (1 cement : 4 fine sand) |
| 56 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 57 | New work (two or more coats) over and including priming coat with cement primer:- |
| 58 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete. |
| 59 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 60 | Water thinnable cement primer |
| 61 | Finishing walls with water proofing cement paint of required shade : |
| 62 | New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 63 | Applying priming coat:- |
| 64 | With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 65 | Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish |
