|
| 1 | Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc.of any description, including removal of rubbish outside MoD land, complete all as specified and directed. |
| 2 | Demolition of brick work or stone boulders masonary built in cement mortar including all arches, pillars etc complete all as specified and directed. |
| 3 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes and disposal of debirs complete all as specified and directed. |
| 4 | Dismantling, Asbestos cement (Plain,corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 5 | Dismantling timber scantlings 40 sq.cm and over in section, in any position unframed work complete all as specified and directed. |
| 6 | M&L for brick work with fly ash sub class \"B\" old sizebricks straight or curved on plain exc. 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 7 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 8 | S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick (AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and directed. |
| 9 | Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed. |
| 10 | S&F GI snap grid frame work for false ceiling of grid size 605x605mm all as specified and Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to steel frame work complete all as specified and directed. |
| 11 | Supplied and fixed fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions and complete all as specified and directed. |
| 12 | S&F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with single cleats or other connecting plates quality conforming to Fe-410W(Gde E-250). quality A complete all as specified and directed. |
| 13 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed. |
| 14 | M&L for stone slabs 30 mm thick cement mortar 1:4 dressed true and square in one length not less than 60 cm and not exceeding 120 cm in copings, window cills, chajjas, sunshades etc punched dressed on exposed faces and self faced on the embedded unexposed beds and joints exposed edges round or chamfered , set, jointed and pointed in mortar as in plinth protection complete all as specified and directed. |
| 15 | M&L cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in 75mm thick plinth protection complete all as specified and directed. |
| 16 | M&L cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angle and throating complete all as specified and directed. |
| 17 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L rendering 15 mm thick in cement mortar 1:4 on brick wall as concrete surface, finished fair and even with using WPC 200mlby weight of cement 50 kg bag complete all as specified and directedNote :- WPC will be measured and paid seperately |
| 19 | Supply only integral water proofing compound complete all as specified and directed. |
| 20 | M&L for preparing the new plastered surfaces of walls and applying two coats of cement base paint on walls complete all as specified and directed. |
| 21 | M&L forapplying two coats of cement base paint on wallsafter complete removal of existing treatment complete all as specified and directed. |
| 22 | M&L for applying two coats of oil bound distemperover 2mm thick putty and over one coat primer on newly plastered surfaces of wallcomplete all as specified and directed. |
| 23 | M&L for applying two coats of oil bound distemper on wall surface surfaces after complete removal of existing treatment complete all as specified and directed. |
| 24 | Dismantling of Stone slabs and tiles of any description or thickness in floors, apronslaid and pointed in any mortar etc complete all as specified and directed. |
| 25 | M&L screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 26 | M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and beeswax polishing to receive granite finish complete all as specified and directed |
| 27 | M&L for 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 28 | M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 29 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 & n exc 4 sq. m each complete all as specified and directed. |
| 30 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed. |
| 31 | S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note :- (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. (ii) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. |
| 32 | S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 33 | S & F Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretchedto tighten firmly supplied and fitted to chowkats complete all as specified. |
| 34 | S&F aluminium slidingbolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 35 | S&F 100mm butt hinges, medium weight, cold rolled, mild steel complete all as specified and directed. |
| 36 | S&F aluminium anodised tower bolts 150mm long, of extruded section complete all as specified and directed. |
| 37 | Supply & fix 150mm size aluminium alloy handles cast type anodized complete all as specified & directed. |
| 38 | S&F, 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed. |
| 39 | S&F mild steel window with side hung shutter incl projecting type hinges with steel handle and steel peg stay complete with glazing complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 40 | S&F mild steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dove-tailed or welded complete all as specified and directed. |
| 41 | S&F for Mild steel framed work such as grills, gratings, etc. with ends ofbars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 42 | S&F forSteel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 43 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and directed. |
| 44 | S&F 3.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 45 | S&F in repair, 25mm dia, powder coated, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets, complete all as specified and directed. |
| 46 | M&L for repair to overhang portion of chajja, facia, drop wall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish to match the existing including necessaryh scaffolding andformwork complete all as specified and directed. Note :- Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance afterbinding of reinforcement for measurement otherwise no payment will be considered on this account. |
| 47 | Taking down carefully any type of battens or conduit point wiringwith conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge. |
| 48 | Material and labour for point wiringwith 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC conduit ofsize 20 /25 mm dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and duly complete all as specified and directed for the following :- |
| 49 | One tube light/Bulb/ Bldg security light point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. |
| 50 | One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed. |
| 51 | One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed. |
| 52 | All as per serial item No 48.02 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. |
| 53 | Supply and fixswitch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed. |
| 54 | Supply and fix insocket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed. |
| 55 | Supply & fixing of socket outlet 3 pin, 05/15 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed |
| 56 | Supply and fix inswitch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed. |
| 57 | Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate all as specified and directed. |
| 58 | Supply anfd fixing LED lamp 9/10 watt complete all as specified and directed. |
| 59 | Supply & fixingLED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed. |
| 60 | Supply and fixing 35W LED building security lightenergy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed. |
| 61 | Supply only ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CMM with min service value 6 BEE 5 star rating,with brushless direct current motor (BLDC) complete all as specified and directed. |
| 62 | S&F metal exhaust fan, 300mm sweep with lovers, AC, 230V with making opening in the wall for fixing exhuast fan including plastering work & making good complete all as specified and directed. |
| 63 | Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed. |
| 64 | Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed. |
| 65 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces incl taking down old u/s DB\"s complete all as directed by Engineer - in -charge. |
| 66 | S&FTPN DB, 4 way, 415 V, double door type suitable for mounting incoming and outgoing MCB’s double pole/single pole,complete all as specified and directed. |
| 67 | S&F 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16KA with Ics=100%Icu,adjustable overload setting incl lugs,nut bolt etc complete all as specified and directed. |
| 68 | Supply and fixing MCB, SP, AC, 240 volts capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed. |
| 69 | Supply & fixing Isolator, DP (Double Pole), AC, 240 volts capacity 32 Ampsand making connections complete all as specified & directed. |
| 70 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipemedium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completioncomplete all as specified and directed. |
| 71 | Suplly and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables with stranded aluminium conductor, 1100 volts grade, 25 Sqmm 4 core incl lugs,thimblescomplete all as specified and directed. |
| 72 | Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out including foming of bottom surface for laying of cable / pipe etc in soft/loose soil complete all as specified and directed. |
| 73 | Returning filling in including spreading levelling, watering and well ramming in layers not exceeding25 cm complete all as specified and directed. |
| 74 | Removing surplus soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exc 1.5M above the starting point complete all as specified and directed. |
| 75 | M&L for sand cushioning, spreading & levelling, watering and well ramming in layers 8 cm before laying the cable and 15 cm after laying the cable and then punned. After punning the thickness of sand cushioning shall be 18 cm. Note :- The tenderer should note only punned thickness shall be measured for payment purpose only. |
| 76 | Supplying & laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and directed. |
| 77 | Supply & Laying light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and directed. |
