|
| 1 | M&L brick work using old size sub class \"B\" bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 2 | M&L brick work using old size bricks with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 3 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or any horizontal portion and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified & directed. |
| 4 | M&L for Neoprene / EPDM (Ethylene Propylene Diene Monomer) rubber gasket complete all as specified and directed. |
| 5 | Taking down and refixing steel cupboard shutter with resecuring or easying and adjusting in same opening n exc 2 sqm including making good surface and refixing in sameopening complete all as specified and directed. |
| 6 | Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. |
| 7 | Taking down chowkats or frames exc. 1.5 sqm but n.exc 4.0 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. |
| 8 | S&F second class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed. |
| 9 | S&F35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 10 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 11 | Taking down shutters of any description not exc 1.00 Sqm each complete all as specified and directed. |
| 12 | Taking down shutters of any description not exc 1.00 Sqm each and refixing in the other opening after repair complete all as specified and directed. |
| 13 | Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each complete all as specified and directed. |
| 14 | Taking down shutters of any description exc 1.00 Sqm butnot exc 2.00 Sqm each and refixing in the same opening after repair such as easing and adjusting complete all as specified and directed. |
| 15 | S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified and directed. |
| 16 | S&F for solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified anddirected. |
| 17 | S&F for solid PVC door frame of size 50 x 47 mm made out of 5 mm wood grain printed PVC sheet used reinforced with MS square tube & edges will be painted to match with printed sheet, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified anddirected |
| 18 | S&F Factory made Solid PVC Moulded door shutter with particle board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 19 | S&F Solid PVC wall Lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 20 | S &F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawingcomplete all as specified and directed. |
| 21 | S&F factory made uPVC white colour casement door with top hung ventilator with 3D and SS friction (400 x 19 x1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 22 | S&F in repair aluminium, anodised, barrel tower bolts of extruded section 200 mm long complete all as specified and directed. |
| 23 | S&F floor in repairdoor stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed. |
| 24 | S&Fin repair 20 mm dia stainless steel, silver & chrome finish, fancy type, anti-rust curtain rod complete as all specified and directed. |
| 25 | S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 26 | S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250 mm length of bolt complete all as specified and directed. |
| 27 | S&F in repair aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 200 mm length of bolt complete all as specified and directed. |
| 28 | M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised for 100 mm long complete all as specified and directed. |
| 29 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 30 mm size complete all as specified and directed. |
| 30 | S&F in repair 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 31 | S&F aluminium handles cast type anodised of 150 mm size complete all as specified and directed. |
| 32 | S&F in repair aluminium handles cast type anodised of 150 mm size complete all as specified and directed. |
| 33 | S&F Mortice lock, vertical type, size 100 mm, 4- lever mild steel body with two keys complete all as specified and directed. |
| 34 | S&F in repair mortice lock, vertical type, size 100 mm, 4- lever mild steel body with two keys complete all as specified and directed. |
| 35 | S&F 75 mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 36 | S&F in repair door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (extruded section) body complete all as specified and directed. |
| 37 | S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 38 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 39 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 40 | M&L for roller blind curtain (semi blackout) for windows roll-up shades light filtering sun and UV protection polyester curtains with plastic cord/chain, brackets fixed with screws complete all as specified and directed. |
| 41 | M&L for cupboard lock, stainless steel, bright finish or electro-galvanised of size 64mm complete all as specified and directed . |
| 42 | S&F stainless steel, curtain rod holder, fancy type for 20mm dia curtain rod complete as all specified and directed. |
| 43 | S&F curtain rod stainless steel knob / side bulb for drapery rod of 25mm dia complete as all specified and directed. |
| 44 | M & L for repairing steel rolling shutters of sizes n exc 4 sqm, with/ without ball bearing, by oiling, greasing, tightening of loose parts like top cover, anchoring rod hasp and staple etcand making smooth functioning complete all as specified & directed. Note : Minor parts required for smooth functioning shall deemed to be included in the quoted rate . |
| 45 | M & L for repairing steel rolling shutters of sizesexc4 sqm, with/ without ball bearing, by oiling, greasing, tightening of loose parts like top cover, anchoring rod hasp and staple etcand making smooth functioning complete all as specified & directed. Note : Minor parts required for smooth functioning shall deemed to be included in the quoted rate . |
| 46 | S&F rolled mild steel section in framed work as in doors or gates of angle or other section withgusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging of grade Fe 290(Gde E-165) complete all as specified and directed. |
| 47 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 48 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with out glazing bars, dovetailed or welded complete all as specified and directed. |
| 49 | S&F pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed. |
| 50 | S&F pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed. |
| 51 | M&L for welding in repairs not exc 2.5 cm in length, thickness of metal to be welded exc. 6mm but n.exc 9 mm complete all as specified and directed. |
| 52 | M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 53 | S&F for powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note : Glass and other filling material in panels shall be measured and paid seperately. |
| 54 | M&L anodised aluminium snap grid frame work (size of grid 605 x 605mm) for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.Note : Design and pattern of gridshall be approved by Engineer-in-Charge. |
| 55 | Taking down existing aluminium window single leaf of area n.exc 1.5 sqm including taking down all members, sheet glass of any thickness, cleat, neoprene rubber beading and resecuring / refixing all section & tightening all joints including fixing new small cleats of suitable size, fixing L-type cleats of stainless steel to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but new neoprene rubber beading (paid under separate item) and making the door shutter serviceable,including fixing the shutter on hinges complete all as specified and directed. |
| 56 | Taking down existing aluminium door single leaf of area exc 1.5 sqm but n.exc 4.0 sqm including taking down all members, sheet glass of any thickness, cleat, neoprene rubber beading and resecuring / refixing all section & tightening all joints including fixing new small cleats of suitable size, fixing L-type cleats of stainless steel to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but new neoprene rubber beading (paid under separate item) and making the door shutter serviceable, including fixing the shutter on hinges complete all as specified and directed. |
| 57 | M&L perforated particle board / tiles12 mm thick for insulation and accoustic purposes 60x60 cm in size fixed with screws to timber frame work or with staples on snap grid complete all as specified and directed . |
| 58 | M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm in vertical surface such as dado /skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tilesincluding 10 mm thick rendering on stone/brick wall in CM 1:4 complete all as specified and directed. |
| 59 | M&L for full body vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm in floors etc. set and jointed with epoxy grounting with minimum 3mm spacer and including screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified and directed. |
| 60 | M&L for machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing on treads of step and landing of stair including screed bed 15 mm thick in CM 1:6 complete all as specified and directed. |
| 61 | M&L for machine cut kota stone slab mirror finished 20-25 mm thick (each slab not less than 0.25 sqm) in riser of step ,skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing including rendering 10 mm thick in CM 1:4 complete all as specified and directed. |
| 62 | M&L for Makrana white Marble tiles 30 cm x 20 cm x 20 mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing types including screed bed 15 mm thick in CM 1:6 complete all as specified and directed. |
| 63 | M&L for glazed ceramic coloured tiles in vertical surface350x 250x 7 mm / 450X 350X 7 mm / 300x 600x7 mm / 450x 300x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in CM 1:4 complete all as specified and directed. |
| 64 | M&L for non skid ceramic coloured tiles of design as approved7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed. |
| 65 | M&L for full body vitrified Ceramic tiles light shade cut out of 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surface such as dado / skirting / risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 66 | M&L for full body vitrified Ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified and directed. |
| 67 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing)and removing rubbish off the premises complete all as specified and directed. |
| 68 | M&L for cleaning of existing marble stone slab / terrazo tiles / terrazo cast in situ floor with wire brush and grinding of flooring firstly with carborundum stone of 120 grit size and secondly 320 grit size. After grinding axalic acid shall be dusted over the surface (at the rate specified in SSR part-I) sprinkled with water and rubbed hard with pad of wooden rags and finally floor shall be wiped with a moist rag and dried with a soft cloth and finished clean complete all as sapecified and directed. |
| 69 | M&L for rendering on fair faces of brick workor concrete surfaceof wall 15 mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed. |
| 70 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 71 | M&L for rendering 10 mm thick in CM 1:3 as in ceiling surface and finished even and smooth without using extra cement complete all as specified and directed. |
| 72 | M&L for rendering on stone masonry or other than fair faces of brick work of wall 15 mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed. |
| 73 | M&L for preparation of old decorated surfaces of slopping Manglore roof, grid pattern , by complete removal of existing treatment and applying two coat of acrylic emulsion exterior graded weather proof paintover a coat of primer includingscffolding upto two stroey building complete all as specified and directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work upto four storey building etc. |
| 74 | M&L for preparation of old decorated surfaces of walls and apply one coat of white wash complete all as specified and directed. |
| 75 | M&L for preparation of newly plastered surfaces of ceilings and apply three coat of white wash complete all as specified and directed. |
| 76 | M&L for preparation of old plastered surfaces of ceilings and apply one coat of white wash on old decorated surfaces complete all as specified and directed. |
| 77 | M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper (OBD) over a coat of alkali resistant priming paint complete all as specified and directed. |
| 78 | M&L for preparing of old surface of wall (plastered or unplastered) including cornices plaster and other wall features by washing, rubbing down and stopping of distmpered, surface to be repaired by filling putty in holes & depression if required, to obtain even and uniform surfaceetc. and applying one coat of oil bound distemper (OBD) on wallwhite or tinted including scaffolding arrangement, trestles, ladders etc for execution of work upto four storey complete all as specified and directed. |
| 79 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and surface to be repaired even & smooth by filling putty in holes & depression if required to obtain even and uniform surfaceetc and applyingtwo coats of oil bound distemper on wall of approved tint complete including all necessary arrangement such as scafflolding / working platform for execution of work upto four storey complete all as specified. |
| 80 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed. |
| 81 | M&L for complete removal of existing treatment and preparation of old surface of wall of any description and applying two coats of oil bound distemper (OBD) over a coat of primer and including 1 mm thick wall putty all as specified and directed. |
| 82 | M&L for preparation of old decorated surfaces of wall with complete removal of existing treatment and applying two coat of cement based paint complete all as specified and directed. |
| 83 | M&L for preparation of new plastered surfaces of wall and applying two cement based paint complete all as specified and directed. |
| 84 | M & L for one coat of cement based paint on old plastered surface of wall including preparation of surfaces upto two/three stroey building including scaffolding arrangement complete all as specified and directed. |
| 85 | M&L for complete removal of existing treatment and preparation of old surface of wall of any description with a coat of 1 mm thick wall putty and applying two coats of acrylic emulsion exterior grade weather proof paint over a coat of primer complete all as specified and directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work upto four storey building etc. |
| 86 | M&L for preparation of new surface of walls of any description with a coat of 1mm thick wall puttycomplete all as specified and directed. |
| 87 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 88 | S&F 4.8 mm thicksheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 89 | S&F figured glass 4 mm thick, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed |
| 90 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone,concrete orbrick surrounds, glazed with putty of fixed with beads complete all as specified and directed. |
| 91 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying sizing,filler coat of shellac varnish or any other high glossy varnish andfinishing coat with staining oil and synthetic varnish as approved shade by engr in chargecomplete all as specified & directed. (Note: the finishing of varnish on wooden surface will be passed by Engr in charge) . |
| 92 | Material & Labour for preparation of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ CGI Sheet or plastered surfaces and applying two coat ofexterior acrylic emulsion paint in camouflaging pattern of any shape andany size complete all as specified and directed by Engineer-in-charge, |
| 93 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 94 | M&L for preparationof old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 95 | M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 96 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying sizing,filler coat of shellac varnish or any other high glossy varnish and finishing coat with staining oil andsynthetic varnish as approved shade by engr in chargecomplete all as specified & directed. (Note: the finishing of varnish on wooden surface will be passed by Engr in charge) . |
| 97 | M&L for preparationof new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 98 | M&L in repair for table top / under counter wash basins, of size 530 x 420 mm Vitreous China, white, flat back, excluding taps, waste, chain and plug andporcelainstopper but including PVC waste pipe minimum 600 mm long suitable for 32 / 40 mm dia of outlet complete all as specified and directed. |
| 99 | S&F in repair Round / Square Grating doom of size 100 / 125 / 140 mm of Stainless Steel (minimum weight 150 gram), with or without waste hole, fixed on floor / nahani trap complete all as specified and directed. |
| 100 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors/ in wallof 150 mm bore of pipe etc complete all as specified and directed. |
| 101 | S&F cast iron soil, waste and vent 100 mm bore of pipes (sand cast) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 102 | S&F cast iron soil, waste and vent 75 mm bore of pipes (sand cast) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 103 | S&F cast iron soil, waste and vent 100 mm bore of pipes (sand cast in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed. |
| 104 | S&F cast iron soil, waste and vent 75 mm bore of pipes (sand cast) in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed. |
| 105 | S&F in repair cast iron cowls for 100 mm bore of pipe complete all as specified and directed. |
| 106 | M&L for cast iron nahani trap with grating including jointing to waste pipe 100 mm diameter of outlet fixed in cement concrete (1:2:4) type B1 completeall as specified and directed. |
| 107 | Disconnecting existing tanks, setting aside or lowering if required for repairs, cleaning etc and hoisting if required reconnecting and refixing in position and including cleaning and removing all scale and dirt etc from RCC / PVC / AC tank and from mouths of circulating pipes etc of tank exc. 250 litres but not exc. 500 litres complete all as specified and directed. |
| 108 | S&F in repair cover of PVC water tank (any capacity) made of 1 mm thick PGI sheet in standard shape fixed with two nos MS nut bolts,washer of size 50 mm long & 6 mm dia complete all as specified and directed. |
| 109 | S&F PVC (SWR) bends any radius of 150 mm borewithoutaccess door complete all as specified and directed. |
| 110 | S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed. |
| 111 | S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed. |
| 112 | S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 40 mm bore of pipe complete all as specified and directed. |
| 113 | Taking up or down steel tubing and connections including cleaning if refixingrequired for 15 mm bore of pipe complete all as specified and directed. |
| 114 | Taking up or down steel tubing and connections including cleaning if refixingrequired for 20 mm bore of pipe complete all as specified and directed. |
| 115 | Taking up or down steel tubing and connections including cleaning if refixingrequired for 40 or 50 mm bore of pipe complete all as specified and directed. |
| 116 | Refixing in repair old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed. |
| 117 | Refixing in repair old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed. |
| 118 | Dismantling water tanks of any description, capacity exc 250 and not exc 500 litres and removing from site complete all as specified and directed. |
| 119 | S&Frotational moulded polyethylenewater storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in positioncomplete all as specified and directed |
| 120 | S&F in repair bib taps cast copper alloy with crutch or butterfly handle, long body, screwed down, screwed for iron pipe or for brass ferrulefancy type chromium plated of 15 mm bore dia of pipe complete all as specified and directed. |
| 121 | S&F in repair for 15mm bore dia of pipepillar taps cast copper alloy, with capstan head chromium platedfancy type screwed down high pressure with or without lettered \"Hot\" or \"cold\" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 122 | S&F in repair stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed. |
| 123 | S&F in repair stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions for 20 mm bore dia of pipe complete all as specified and directed. |
| 124 | S&F in repair stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed. |
| 125 | S&F ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 15 mm bore of pipe complete all as specified and directed. |
| 126 | S&F in repair waste fittings, brass, chromium plated 32mm dia for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 127 | S&F in repair ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed. |
| 128 | S&F in repair PVC connection 15 mm bore sizewithPTMT nuts of length 450 mm complete all as specified and directed. |
| 129 | S&F in repair PVC connection 15 mm sizewithPTMT nuts of length 600 mm complete all as specified and directed. |
| 130 | S&F in repair CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors for100 mm bore of pipe complete all as specified and directed. |
| 131 | S&F in repair CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors for 75 mm bore of pipe complete all as specified and directed. |
| 132 | S&F in repair CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors for 75 mm bore of pipe complete all as specified and directed. |
| 133 | S&F in repair CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors for 100 mm bore of pipe complete all as specified and directed. |
| 134 | M&L in repair for Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as pecified and directed. |
| 135 | M&L in repair for Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed. |
| 136 | M&L in repair wash down water closet vitreous china white pedestal pattern with \"P\" or \"S\" trap including connecting to outgoing drain pipe & to flushing pipe also including plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, excluding flushing cistern and flush pipe complete all as specified and directed. |
| 137 | S&F in repair Water closet vitreous china squatting pan, orissa pattern 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) and including provision of lime concrete bedding ,\"P\" or \"S\" trap 100 mm bore , flushing pipe ,anti-syphonage pipe and connection etc and making good to floor complete all as specified and directed. |
| 138 | S&F in repair PVC 10 litres capacityvalveless ,syphonic action type low level flushing cistern ,white including flush pipe, inlet, ball valve, float and handle etc complete all as specified and directed. |
| 139 | M&L in repair toilet paper holder , of stainless steel with flat recessed type, chromium plated, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make:- Jaquar CAT Part No. CPA-CHR-1151 / Grohe Cat Part No. 40367000 / Kohler cat Part No. K-5633IN-CP or equivalent as approved by GE. |
| 140 | S&F in repair plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 141 | M&L in repair for vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including PVC connection of 450 mm long, PVC(HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc. complete all as specified and directed. |
| 142 | S&F in repair looking mirror 5.5 mm thick of selected quality glass of size 600 x 450 mm bevelled edge , mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washers including aluminium anodized frame complete all as specified and directed. |
| 143 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 144 | S& F in repair vitreous china urinal partition white of size 310x700 mm,urinal partitions slabs terminating about 40cm above floor line complete all as specified and as directed. |
| 145 | S&F in repair PVC kit including flush washer for low level flushing cistern of any description complete all as specified and directed. |
| 146 | S&F in repair bib taps 2-in-1 cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrulefancy type of 15 mm bore dia of pipe complete all as specified and directed. Make : Jaquar CAT Part No KUP-CHR-35041PM / Kohler CAT Part No 25432IN-4-CP / Grohe CAT Part No 20281000 or equivalent as approved by GE. |
| 147 | S&F in repair brass chromium platedoverhead shower rose of 120 X 120 mm / 150 x 150 mm size with or without swivel joint complete all as specified and directed. Make : Jaquar CAT Part No OHS-CHR-1667 / Grohe Cat Part No. 26565000 / Kohler cat Part No. 22645IN-CP or equivalent as approved by GE. |
| 148 | S&F in repair PVC waste pipe minimum 600 mm long suitable for 32 / 40 mm dia of outlet for wash hand basin / sink complete all as specified and directed. |
| 149 | S&F in repair concealed Stop Valve with adjustable wall flange, fancy type chromium plated cast copper alloy,for 15 mm bore dia of pipe screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. Make:- Jaquar CAT Part No VGP-CHR-81083K / Kholer CAT part No. K-16087IN-4-CP / Roca CAT Part No RT5A1509CAH or equivalent as approved by GE. |
| 150 | M&L in repair spindles for 15mm CP brass bib cock/ stop cocks etc size 1 nos to 4 nos for full turns/ half turns complete all as specified & directed. |
| 151 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required for 100 mm internal dia of pipe complete all as specified and directed. |
| 152 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required for 150 mm internal dia of pipe complete all as specified and directed. |
| 153 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required for 75 mm internal dia of pipe complete all as specified and directed. |
| 154 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 155 | Dismantling of boarding, any description, fixed in any position with nails etc complete all as specified and directed. |
| 156 | Dismantling of stone slabs in roofs, suspended floors, chajjas, landings, etc any thickness, jointed in any mortar complete all as specified and directed. |
| 157 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs/ blankets any thickness including cover fillets complete all as specified and directed. |
