|
| 1 | Attending complaints related to plumbing/water supply and obtaining completion from user including minor repair such as replacement of washers, tightening of taps, tightening of check nuts/unions/sockets/ PVC connection etc and making water supply functional in case of blockage, refixing of GI pipe joints, application of white cement where required, complete all as specified and directed. Note : (I )Only experienced01 Nos plumber shall be used to attend day to day complaints for above mentioned complaint shall be issued under respective item.(II) Contractor or his representative shall collect the complaints at 0830hrs from complaint cell of AGE B/R-II and the complaints shall be attended / make good/rectified within 24hrs on receipt of the complaints and info the status of the complaint at 1700hrs every day to complaint cell. On failure of the same a penalty of Rs 250/- per day per complaints shall be charged. |
| 2 | Attending complaints related to Carpenter Work , including repair andeasing of wooden & aluminium doors, windows , re-fixing or retightening of doors, windows, resecuring of door/window wire guage etc including nails, screws etc required to make good the work, complete all as specified and directed. |
| 3 | Attending complaints related to mason work such as repair to existing damaged plaster/ floor/ plinth protection/ jointing of damage brick/stone work in minor patches not exc 2.00 Sqm each including matching the surface with existing finish with necessary material like cement, sand, lime aggregate, brick stone etc complete all as specified and directed. |
| 4 | Re securing glass of any description in existing metal frames/ wooden frame with putty/beads including removing loose/decayed putty/ beads, painting/oiling one coat on rebates, grooves, re puttying and painting/oiling puttied surfaces to match existing work complete all as specified and directed. |
| 5 | Taking down and refixing door shutters of any description of area exc 1.0 Sqm but n.exc 2.0 Sqm each in the same opening including easing of door/window/cup board shutters for easy closing/ opening incl tightning of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts etc complete all as specified and directed. |
| 6 | S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to velley gutters, winties for roof sheets, framing for monkey proofing, welded mesh, support to sign board & fencing post, etc as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 7 | Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed. |
| 8 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed. |
| 9 | S&F for 30mm thick flush shutter solid core construction with block board core & ply wood face panels, commercial type on both faces complete all as specified and directed |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 11 | S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded including sliding door bolts, 150mm long ordinary mild steel rat rail rod pattern springs including roller plate complete (suitable for MAP Qtrs) (Sample kept in AGE B/R-II office) or as directed by Engr-in-Charge. |
| 12 | Taking down carefully old PVC door frame with PVC door shutters of any description of area exc 1.0 Sqm but n.exc 2.0 Sqm each and refixing of same door shutter in same location or new door frame including easing of door shutters for easy closing/ openingand incl necessary joinary fittings where required complete all as specified and directed.Note : WPC Doors frame will be measured and paid separately. |
| 13 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 14 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 15 | S&F 100mm long SS dash fasteners complete all as specified and directed. |
| 16 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 17 | M&L for preparation of new wooden surfaces & applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 18 | M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed. |
| 19 | M&L for welding in repairs of loose joints of sliding doors, hinges, siliding door bolts, garrage doors,windows, doors, northlight framing, monkey prrofing framingetc inc at any height & inc necessary cutting and grinding including replacement of wire mesh all as specified and directed. Note : wiremesh and MS angle etc will be measured and paid seperately. |
| 20 | S&F in repairsGalvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with screws to Aluminium window complete all as specified and directed. |
| 21 | Hacking out old broken glass any size thickness from steel/ aluminium /wooden frame including removing MS cleats punching or drilling out old glazing pins/springs etc all as specified and directed. |
| 22 | S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square n exc 0.50 sqm each pane complete all as specified and directed. |
| 23 | S & F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed. |
| 24 | S&F 4mm thickness tinted glass ordinary quality n. exc 0.5 sqm in each pane and fixed with rubber gasket beading and aluminium channels in aluminium windows, bookcase/shelf with rollers, wheels, aluminum clips, screws etc and making good as per site requirement complete all as directed and specified. |
| 25 | S&F in repairs stainless steel drapery rod of size 20mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of stainless steel brackets fixed at both ends with PVC rawl plugs and screws on walls/beamcomplete all as specifed and directed. |
| 26 | S&F in repairs Mild steel butt hinges medium weight, cold rolled, 100 mm, ISI marked, complete all as specified and directed. |
| 27 | S&Fin repairs 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 28 | S&F in repairs 200mm long aluminium anodised, barrel tower boltls of extruded sections and fixed complete all as specified and directed. |
| 29 | S&F in repairs 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 30 | S&F in repairs 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 31 | S&Fin repairs MS door springs for doors, 150 mm, long ordinary rat tail rod pattern springs including roller and roller plate and fixing in MS frame or wooden frame complete all as specified and directed. |
| 32 | S&F in repairs for plate rack of stainless steel 1mm thick for kitchen or labotary over all size 914 x 787 x 254 mmfixed with plugs and washers on wall complete all as specified and directed. |
| 33 | S&F in repairs for plate rack of stainless steel 1mm thick for kitchen or labotary over all size 762 x 609 x 254mmfixed with plugs and washers on wall complete all as specified and directed. |
| 34 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including waste coupling and waste pipe complete all as specified and directed. |
| 35 | S&F in repairs sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowlsize 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and directed. |
| 36 | Taking up or down steel tubing and connection 20 mm bore pipe complete all as specified and directed. |
| 37 | S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore complete all as specified and directed. |
| 38 | S&F in repair Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 500 ltrs, including 20 mm bore Ball PTMT brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 39 | S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including ball PTMT valve 20 mm bore, high pressure with polythene ball & float complete all as specified and directed. |
| 40 | M&L for 0.5mm thick MS plain sheet for making modified lid of water tank as per sample kept in offcie of AGE B/R-II and fixed with 04 nuts and bolts for water tanks for water capacity n. exc 1000 ltrs all as specified and directed. |
| 41 | S&F in repairs 15mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 42 | S&F in repairs 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedincluding union,tee, socket etc wherever required complete all as specified and directed. |
| 43 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white with \"P\" or \"S\" trap (excluding flushing cistern and flush pipe) including seat and cover and connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. |
| 44 | S&F in repairs PVC valveless flushing cistern 10 Ltr capacity (white), syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete all as specified and directed. |
| 45 | S&F in repairsVitreous china wash hand basin, white flat, size 550 x400 mm including brackets, waste coupling and waste pipe complete all as specified and directed. |
| 46 | S&F in repairs EWC seat cover with fittings (hinges) suitable to EWC complete all as specified and directed. |
| 47 | S&F in repairs 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Min weight 15mm - 90gms) |
| 48 | S&F in repairs 15mm bore pillar taps of PTMT any colour high press ure screwed for iron pipe (minimum weight 15mm-110gms) complete all as specified and directed |
| 49 | S&F in repairs CP bib tap long body 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed. |
| 50 | S&F in repairs CP 15mm bore bib tap 2-in-1 cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed. |
| 51 | S&F in repairs CP angle valve 15mm bore cast copper alloy fency type, chromium plated with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed. |
| 52 | S&F in repairs sink cock swan neck 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed for iron pipe and fixed complete all as specified and directed. |
| 53 | S&F in repairs Wall mixer three way L Bend mixer chromium plated for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed. |
| 54 | S&F in repairs centre hole basin mixer 15mm bore, cast copper alloy, chromium plated, screwed for iron pipe and fixed complete all as specified and directed. |
| 55 | S&F in repairs CP brass 15mm health fauctwith 1.20M length pipe complete all as specified. |
| 56 | S&F in repairs 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 57 | S&F in repairsPVC connection 15 mm size with PTMT nuts of length 600mmcomplete all as specified and directed. |
| 58 | S&F in repairsPVC connection fibre reinforced 450/600mm long with brass check nuts and PVC washers at both ends as specified and directed. |
| 59 | S&F in repairs CP kitchen sink waste coupling of size 100mm/ 125mm suitable for sink complete all as specified and directed |
| 60 | S&F in repairs CP WHB waste coupling of size 32mm complete all as specified and directed. |
| 61 | S&F in repairs PVC waste pipe 32 mm dia complete all as specified and directed |
| 62 | S&F in repairs for cast copper alloy chromium plated shower rose 150mm complete all as specified and directed. |
| 63 | S&F in repairs ofbrass adjustable rod for centre hole WHB mixer inc round washers and packing as per site requirement complete all as specified and directed |
| 64 | S&F in repairs brass adjustable legs for wall mixer incl washers and packing as per site requriment complete all as specified and directed |
| 65 | S&F in repairs chrominum plated brass jet spray of 15mm bore sutible for fixing in EWC complete all as specified and directed |
| 66 | S&F in repairs 5mm thick corner glass shelf with bracket complete all as specified as directed. |
| 67 | S&F in repairs acrylic bathroom corner shelf of (suitable for MAP Qtrs) (Sample kept in AGE B/R-II Office)fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 68 | S&F in repairs 16/18/20 inches long SS sliding channel for drawer complete all as specified and directed. |
| 69 | S&F in repairs 40 mm dia brass polished, bright finished cup board knobs fixed with nut screws and washer complete all as specified and directed. |
| 70 | M&L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 71 | Demolition of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed. |
| 72 | S&F in repair18/19mm thickPrelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 73 | S&F in repair continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open ) 40 mm complete all as specified and directed. |
| 74 | S&F in repair aluminium anodised 100mm long Hasp and staple, safety type, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 75 | S&F of Magnetic catcher for kitchen/cupboard shutters fixed with screws complete all as specified and directed. |
| 76 | S&F in repairslooking mirror of size 600 mm x 450 mm mirror of selected quality glass fixing in PVC frame fixed with rawl plugs & screws complete all as specified and directed. |
| 77 | M&L for preparation of old plastered surfaces of walls/ceiling and applying two coats of white wash complete all as specified and directed. |
| 78 | M&L for prepration of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coat of synthetic enamelcomplete all as specified and directed. |
| 79 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 80 | M&L for preparation of old wooden surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with one coats of synthetic enamel paintcomplete all as specified and directed. |
| 81 | S&F in repairs brass Chromium plated towel rail 600 mm long complete all as specified and directed. |
| 82 | M&L for cutting and removing of bushes, small trees, vegetation (Peepal, bad small plants etc) of any ida and girth from roof projection, chajjas, wall junction, parapet etc at any height by necessary demolition of brick work, cment plaster, digging out roots from concrete or brick wall filling holes on building wall/roof/chhajja/ water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed. |
| 83 | S&F in repair door closer hydraulically aluminium (extruded section body) designation No 3, universal type suitable for doorshutter of 851 to 1000 mm in width and of weight between 61 to 80 kgcomplete all as specified and directed |
| 84 | S&F inrepair GI Tank nipple of 20mm/15mm bore 150mm long suitable for PVC storage tank of capacity upto 1000 litre complete all as specified and directed. |
| 85 | S&F in repair15mm GI Socket/Elbow/Tee ISI markedrequired against item No 1 above complete all as specirfied and directed. |
| 86 | S&F in repair20mm GI Socket/Elbow/Tee ISI markedrequired against item No 1 above complete all as specirfied and directed. |
| 87 | S&F of 15/20mm brass spindal suitable for wall mixer/wash hand basin mixer/CP Tap required against item no 1 above complete all as specified. |
| 88 | S&F of brass leg piece connection suitable for wall/wash hand basin mixer required against item No1 above complete all as specified and directed. |
| 89 | S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) |
| 90 | Taking down cement plaster or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 91 | M&L for rendering 10 mm thick on fair surfaces of brick work in cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed. |
| 92 | M&L for 5mm thick rendering on concrete surface of ceiling with cement mortar (1:3) finished even and smooth without using extra cement complete all as specified anddirected. |
| 93 | M&L including preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 94 | M&L for applying two coats of Premium acrylic oil bound distemper over smooth surfaces of walls complete all as specified and directed. |
| 95 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper overa coat of primer including a coat of 2mm thick wall care puttycomplete all as specified and directed |
| 96 | M&L for preparation of new plastered surfaces of walls/ceiling and applying two coats of white wash complete all as specified and directed. |
| 97 | M&L for prepration of old plastered/unplasterred surfaces of walls and applying one coat of oil bound distemper over and including a coat of wall care putty interior grade wherever required complete all as specified and directed. |
| 98 | M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of primer and including a coat of wall care putty interior grade complete all as specified and directed. |
| 99 | M&L for 2mm thick wall care putty for prepration of surface complete all as specified and directed. |
| 100 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsionpaint (weather proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including wall acre putty complete all as specified and directed. |
| 101 | S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 102 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 103 | S&F in repairs CP brass 15mm health fauctwith 1.20M length pipe complete all as specified. |
