|
| 1 | Dismantling asbestos cement(corrugated, semi corrugated, etc.) sheets in roof coveringscomplete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 3 | S&FPre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/ cladding to wall, fixed with self tapping screws ascomplete all as specified and directed. |
| 4 | M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 5 | S&F 1 mm thick, 100 mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges incld dismantling all as specified and directed. |
| 6 | Dismantling of wall and ceiling boards (fiber, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed. |
| 7 | Providing & fixing false ceiling 12mm thick semi perforated micro tengular edge at all heights with GRG (Glass Fiber With Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. complete all as specified and directed. |
| 8 | Dismantling timber scantling 40 Sqcm and over in section inany position as in unframed work, complete all as specified and directed. |
| 9 | S&F Mild steel screw bolts shank dia 12 mm to 20 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Fe-410- W(Gde-E-250) quality-B complete all as specified and directed. |
| 10 | S&F mild steel rolled work as in roof trusses, (framed), trusses,purlin, crane gantries, rails and heavy bracket framing (Beam, angle, channel or flat section) including distance pieces, cleats and for cooler stand etc, confirming to grade Fe 410-W (Gde-E-250) Quality A, complete all as specified and directed. |
| 11 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and directed. |
| 12 | M&L preparation andtwo coat of synthetic enamel painting on new steel surfaces over 10cms width or girthover a coat of red oxide primer etc all as specified and directed. |
| 13 | Taking down Chowkats or framesn.exc 1.5 sqm each with shutters (without taking off shutters from the frames)complete all as specified and directed. |
| 14 | Taking down Chowkats or framesexc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames)complete all as specified and directed. |
| 15 | S&F for 125x60 mm double patam Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 16 | M&L for 2nd class hard wood factory made 35mm thick glazed /gauzed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, sizes of members of shutters specified in SSR Part I, Section 8 , Clause 8.24(a) complete all as specified and directed. |
| 17 | M&L for 35 mm thick 2nd class hard wood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile shall be as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 18 | M&L for two coats of synthetic enamel paint over a coat of pinkprimer on new wooden surfaces over 10 cm in width or girth including preparation of new or previously untreated surfaces of woodcomplete all as specified and directed. |
| 19 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples (for windows and gauzed doors) all as specified and directed |
| 20 | M&L PCC 1:3:6 type C1 (20mm gr agg) as in pressed steel door anchoring hold fast, bed plate etc all as specified and directed. |
| 21 | S&F SS Butt hinges100 mm longcomplete all as specified and directed. |
| 22 | S&F 200mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 23 | S&F aluminium anodized extruded bow handle fabricated type 150 mm long, anodized and fixed complete all as specified and directed. |
| 24 | S&F SS curtain rail 20 to 25 mm diawith pair of suitable brackets, finnels, decorative knobs and also making good the wall surface to match the existing surfaces complete all as specified and directed. |
| 25 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedcomplete all as specified and directed. |
| 26 | S&F floor door stopper 140 mm of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floorcomplete all as specified and directed. |
| 27 | M&L for Forming jambs, etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing in CM 1:4 to match existing work, complete all as specified and directed. |
| 28 | Taking down cement plaster from stone/brick walls including racking out joints for keys and scrubbing down with water etc, complete all as specified and directed. |
| 29 | M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on walls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed. |
| 30 | M&L for 10mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on walls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed. |
| 31 | M&L for rendering Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed.Note:- Payment for providing grooves shall be made separately under respective items. |
| 32 | M&L and forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge. |
| 33 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 34 | M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over and including a coat of alkali primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed. |
| 35 | Material & Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. |
| 36 | M&L for complete removal of existing treatment of walls and applying two coat of oil bound distemper over and including a coat of alkali primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed. |
| 37 | Providing and applying wall care putty of 1 mm thick over plastered surface to prepare the surface even and smooth. complete all as specified and directed. |
| 38 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified and directed. |
| 39 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottomand sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 40 | M&L Anodized aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern(DG 104), with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handle and fixing approved anodised aluminium standard F section (19x28x2mm thick) around the opening, all complete as per requirement and direction of Engineer-in-Charge.complete all as specified and directed. |
| 41 | S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each panecomplete all as specified and directed. |
| 42 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and Precast concrete articles, complete all as specified and directed. |
| 43 | M&L for Brick work with Sub class \"B\" old size burnt bricks straight or curved on plan to any radius in half brick thick walls, built in Cement mortar 1:4 complete all as specified and directed. |
| 44 | M&L for Brick work with Sub class \"B\" old size burnt bricks straight or curved on plan exceeding 6m mean radius, built in Cement mortar 1:6 complete all as specified and directed. |
| 45 | Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above ground level)complete all as specified & directed. |
| 46 | M&L endura parking tiles 30cm x30cm x 15mm thick, set, jointed and pointed in neat cement slurry in floors with greycement and pigment including15mm thick screed bed in CM 1:4etc all as specified and directed |
| 47 | M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filing and mass concrete complete all as specified & directed. |
| 48 | M&L 40 mm thick, Cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in floors complete all as specified & directed. |
| 49 | M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-2(using 40 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and fair at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight all as directed at site. |
| 50 | Dismantling floor, hearth or wall tiling including cement mortar bedding and including disposal of all debris out side MOD land complete all as specified & directed. |
| 51 | M&L for Non - skid Ceramic tiles 7-10 mm thick, light shade(square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles including 15 mm thick screed bed in CM 1:6 complete all as directed. |
| 52 | All as per item no 51 above here-in-before but in skirting/ dado all as specified and directed. |
| 53 | M&L treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified & directed. |
| 54 | Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface ofthe sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified & directed. |
| 55 | Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets, regulators light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specified & directed. |
| 56 | M&L point wiring with PVC insulated FRLS 1100 Volts sheathed cable 1.5 Sqmm multistranded copper conductor and drawing in & including rigid PVC conduit FRLS grade ,ISI marked ,GI flush box of suitable size and 3 mm thick hylam sheet cover for flush boxes also including provision of earth wire PVCinsulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly and earth terminal box drawn in same concealed conduit. complete all as specified & directed. |
| 57 | One light/fan/bell point controlled by one way switch 5 amps. |
| 58 | One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. |
| 59 | One 3 pin 5 Amps socket outlet point controlled by one way switch on same board. |
| 60 | All as per above item No 56 but with cable 2.5 Sqmm size 1100 volts grade for One 3 Pin socket 15A Independent board |
| 61 | S&F of switch piano type 5/6 amps single pole one way complete all as specified and directed. |
| 62 | S&F of switch pianotype 16 amps single pole one way complete all as specified and directed. |
| 63 | S&Fof socket outlet multipurpose 2 in 1, 3 pin 6 amps flush button type complete all as specified and directed. |
| 64 | S&Fof socket outlet multipurpose 2 in 1, 3 pin 6 and 16 Amps complete all as specified and directed. |
| 65 | S&Fof ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections complete all as specified and directed. |
| 66 | Supply, laying and drawing submain wiringin and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforming to IS : 694 of 1990 complete including connection all as specified and directed. |
| 67 | Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and deposit to MES store to refixing with complete accessories all as specified and directed. |
| 68 | Supply & fixing ceiling fans complete with blades, down rod and accessories, 230 volt, 1200 mm sweep. min air delivery 210 CFM with service value 6.00 BEE. five star rated with brushless direct current motor (BLDC) along with providing hook for hanging of ceiling fan as per site requirement all as specified and directed. |
| 69 | S&Fof factory made epoxy polyester powder coated distribution board SP & N 12 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and6 SP MCBs as outgoings complete all as specified and directed.NOTE:-(a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 70 | S&Fof factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and6 SP MCBs as outgoings complete all as specified and directed.NOTE (a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 71 | S&Fof factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet andfixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with 4 pole MCCB as incomerand 12 SP MCBs outgoings complete all as specified and directed including taking down old DBs. NOTE :-(a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 72 | S&F in ofMCCB 100 Amp 4 pole 16 KA at 415 V with fixed thermal magnetic release complete all as specified directed. |
| 73 | S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB\"s complete all as specified and directed. |
| 74 | S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity, complete all as specified and directed. |
| 75 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 76 | Supply and fixing LED luminaries 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 77 | Supply and fixing LED Building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. |
| 78 | Supply and fix in repairs decorative wall light fittings suitable for LED bulb of 9/12 watt (B-22), including connection with all necessary fixing accessories complete all as specified and directed by Engr-in-charge. |
| 79 | Supply & fixing LED reading lamp , wall mounted with adjustable arm having LED light source of 3 watts, aluminium body with powder coating finish, complete all as specified and directed. |
| 80 | S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed. |
| 81 | S&Fof single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB\"s complete all as specified and directed. |
| 82 | M&L far Earthing complete with galvanised steel earth plate electrode 60cmX60cmX 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed. |
