|
| 1 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 2 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.(a) 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 3 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 4 | 3.5 x 120 sqmm (45 mm) |
| 5 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 6 | Above 35 sq. mm and upto 95 sq. mm |
| 7 | Supplying and making straight through joint with heatshrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 8 | 3½ X 95 sq. mm |
| 9 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty) armoured UG electric cable with aluminium conductor of size 3.5 x 120 sq.mm. direct in ground including excavation,and refilling the trench etc as required but excluding sand cushioning, protective covering etc. as required.(Havells/KEI/Polycab) |
| 10 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty )armoured UG electric cable with aluminium conductor of size 3.5X120sq.mm. in the existing masonry/ open duct/ hume pipe/saddling on the wall etc as required.(Havells/KEI/Polycab) |
| 11 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty) armoured UG electric cable with aluminium conductor of size 2 x 16 sq.mm. direct in ground including excavation,and refilling the trench etc as required but excluding sand cushioning, protective covering etc. as required.(Havells/KEI/Polycab) |
| 12 | Supplying, installation, testing & commissioning of 70W LED Flood light luminaire,Energy saving, environmental friendly, long life, one design for aesthetic consistancy in multi purpose application with SMD LEDs as light source with driver included, suitable for highlighting architectural features or Area lightin complete with all accessories and connections with 3 x 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (Acceptable makes: Havells makeJETALEGANZAFLS70WLED757P60DTOTG or equivalent to philips/crompton) |
| 13 | Fabrication, Supplying, installation, testing and commissioning of outdoor hut type compartmantalised, double door feeder pillar made out of 2mm thick CRCA sheet of size apprx. ( 400 mm Depth )with both side opening totally enclosed weather, damp proof having400A FP aluminium bus bars insulated with PVC color coded heat shrinkable sleeves with MS angle frame made out of 50X50X6 with 1000mm long legs suitable for 415V, 3 phase 50Hz AC supply complete with painting/Powder Coating, connections, interconnections with aluminium conductors complete with cement concrete foundation i/c finishing etc. and having provision for fixingrequired accessoriesas required complete in all respect. Make: RS Controls and Switchgears Private Limited/ Adlec/ Tricolite/Any CPRI APPROVED MAKE as per direction of engineer in charge. |
| 14 | Supply, installation, testing and commissioningof following accessories in existing panel cubical type compartmentalized having necessary cable alleys, including cconnection inter-connection with aluminium busbar etc asper requirement and direction given by the Engineer-in charge |
| 15 | 160- 200 Amps, 4 pole , breaking capacity 36 KA, 415 V, 50 Hz DN2.250D type with thermal release with cat ref. CM98065OONO make L&T. |
| 16 | 125A TO 160A, 16 KA TP&N, MCCB |
| 17 | 63A10 KA TP&N, MCB |
| 18 | RYB indicating lamp |
