|
| 1 | CIVIL WORK |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix. |
| 3 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge in cement mortar. |
| 4 | PCC in foundation : Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8(1 cement:4 Coarse sand :8 graded stone aggregate 40 mm nominal size). |
| 5 | Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in cement mortar 1:6 |
| 6 | kota stone slab flooring 25 mm thick over 20mm ( average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement: 4 Course sand ) for area 2001 to 5000 sq. Cm |
| 7 | External Plaster : Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finished 20 mm thick. |
| 8 | Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | Gola Providing gola 75mm x 75mm in cement concrete 1:2:4(1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge) including finished with cement mortar 1:3(1 cement: 2 fine sand) as per standard design. |
| 10 | Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding. |
| 11 | Copping: Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls(any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, copping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. M20 grade nominal Mix 1:1.5:3(1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 12 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 13 | P/F reinforcement for RCC work including straightening,cutting, bending, placing in position and binding (including cost of binding wire) all complete upto floor five leveTMT bars (Conforming of relevent IS Code). |
| 14 | Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 : up to 15 cm thick. |
| 15 | Wiring of light point/ fan point/ exhaust fan point/ call bell point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked ( IS:9537 P - II ) rigid steel conduit & it\"s all accessories, round tiles, Hot Dipped Galvanized Modular Box of 18 SWG with earth terminal, 6 A Modular switch,3 pin ceiling rose / lamp holder/ 3 point connector ,Modular face plate with grid plate, pvc bushes, check nuts, screws etc, all as per pre approved by Engineer in charge, making connections, testing etc. complete as required. Light point & Fan Point |
| 16 | Short point (up to 3 mtr.) |
| 17 | Medium point (up to 6 mtr) |
| 18 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A/C/D ,flame retardant as per IS 10810-53, better amperage rating as per IS:3961 PART 5 in in existing surface or recessed PVC/ MS conduit/casing capping making connections with copper lugs of suitable size, Ferrules, testing etc. as required OEM must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of products/work refer Annexure-\"A\" attached with this BSR. 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 19 | Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , Power Consumption of 18W/20W ,system lumen efficacy ≥ 120 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% ,p.f.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. 4\" LED Tube shape fixture 18/20 W (Polycarbonate Base) For additional technical parameters of products /work refer Annexure \"A\" attached with this BSR 1.17 mm (+/-10%) LED batten with minelumen output 2200. |
| 20 | Providing & Fixing of ISO Certified company made BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan as per PWD specification for electrical Works, conforming to IS:374-2019, & IS:1885 -P-V- 1981. with down rod up to 30 cm with secondary support safety cable ( steel wire ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. 1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 ) |
| 21 | Providing & Fixing of ISI marked (IS:1258) 6 amp batten/angle lamp holder with CM/L no. printed and made out from industrial agade Polycorbonate ABS material, brass terminal & captive screws including making connection testing etc. as required. All as per pre approved by Engineers incharge for additional technical parameters of products/wor refer Annexure\"A\" attached with this BSR. |
| 22 | P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge. |
| 23 | Providing & Fixing of modular type 120 w Step Fan regulator duly ISI marked (IS :11037:1984)with CML no. printed made out of unbreakableand fire retardant vergin poly carbonate with brass terminals and captivescrews & silver alloy contact tip with IP-20 rating, including all as per preapproved buy engineers incharge making connections, testing etc. as required for additional technical parameters of product/work refer Annexure \"A\" attached with this BSR 5 step fan regulator 2 module 360 degree rotating. |
| 24 | P &F 12 mm thick G.I/ MS sheet boxes duly finished with two coats of red oxide and with earthing terminal of following sizes in recessed/ surface as required. For additional technical parameters of products/work refer Annexure \"A\" attached with this BSR 1.2 mm thick M.S. sheet boxes 175mm x 100 mm x 60 mm. Please Enable Macros to View BoQ information |
