Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing)complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for 300 x 300 x7-8 mmdigital coloured ceramic tilesas in floors etc,laid over and including bedding layer of 20mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 3 | M & L for Digital Coloured glazed ceramic tiles450 x300 x7-8 mm thick on vertical surfaces i.e skirting, dado etc laid over backing coat 10mmthick in cement mortar 1:4 set & jointed in neat cement paste and pointed in white cement mixed with pigment complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for 400 x 400 x 7-8 mm digital coloured Non - skid Ceramic tileslaid over and including bedding layer of 20mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 5 | Ditto all as per item No4 above but as in skirting over including backing layer of 10mm thickin CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 6 | M & L for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for preparation ofold decorated surfaces of wall and applying one coat of distemper oil emulsion white or tintedcomplete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applyingtwo coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for Preparation of old painted surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applyingtwo coat of synthetic enamel paint over a coat of antirush paint/red oxide primer, complete all as specified and as directed by EIC. |
| 10 | M & L for removingcomplete old decorated surfaces of wall , applying 1mm thick wall care putty and applying two coats of distemper oil emulsion white ortinted over a coat of alkali resistant primercomplete all as specified and directed by Engr-in-Charge. |
| 11 | S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to wooden doors / windows shutter with wooden beading (any size) and tinned tacks or fixed to aluminium window / vent with aluminium wire staples complete all as specified and directed by Engr-in-Charge. |
| 12 | S & F for in repair powder coated aluminium serrated finish 20/25mm dia curtain rod including fancy types domes cum brackets suitable for 20/25mm dia curtain rod fixed with C/P screws & rovel plugs and fixed to both ends of the curtain rod etc complete all as specified and directed by Engr-in-Charge. |
| 13 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engr-in-Charge. |
| 14 | M & L for rendering 15mm thick in two layers(10mm inner coat + 5 mm finishing coat) in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 15 | M & L for rendering 5mm thick in CM 1:3 on ceilling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 16 | M & L for preparing newly plastered surfaces of wall, priming plastered and other surfaces with alkali-resistant priming paint and applying two coats of distemper oil emulsion, white or tinted over 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge. |
| 17 | M & L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge. |
| 18 | Demolition of lime/cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for cement concrete 1:5:10 type E2 using 40mm graded stone coarse aggregate in sunken floor complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 10 mm thick in CM 1:3 mixed with water proofing compound and applying evenly two coats of industrialbitumen 85/25 at a rate of 1.2 kg /sq.m/coat over a coat of primer as per manufacturers instruction over vertical sides of sunken floors. Note: Test the water proofed area (ponding test) by filling water for atleast 72 hoursto the entire satisfaction of GE . |
| 21 | M&L for 75 mm thick PCC 1:3:6 type C2 ( using 20mm graded stone aggregates) as in sub base to floors, pavements etc complete all as specified and directed by Engr-in-Charge. |
| 22 | S & F in repairs for CI Nahani trap dia of outlet 75mm with CP grating including jointing to waste pipe in run lead fixed in cement concrete type B-1 (1:2:4)complete all as specified and directed by Engr-in-Charge. |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge. |
| 24 | Supplying & fixing Framed work such as grills, gratings,plane or chequered plates etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 290 Gde E-165complete all as specified and directed by Engr-in-Charge. |
| 25 | M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 26 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge. |
| 27 | M & L for reinforced cement concrete type B-1 1:2:4(20mm graded stone aggregate)as in slabs supported on walls,beams,column in floors,roofs,landings,canopies,balconies, deck slabs and in shelves and the likecomplete all as specified and directed by Engr-in-Charge. |
| 28 | M & L for Mild steel TMT(CRS) bars 6 to 8mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 29 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n exc 20mm thick(horizontal or sloping) complete all as specified and directed by Engr-in-Charge. |
| 30 | Dismantling of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, aprons, skirting, jamb/cill etc including removal of debries out of defence land complete all as specified and directed. |
| 31 | M&L machine cut mirror polished granite (of any type) slab 18 to 20mm thick as in like kitchen platform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone overscreed bed or bedding layer 10 mm thick in CM 1:6 including grinding, polishing and making necessary hole for gas pipe and necessary bull nosing etc complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L machine cut pre polished Kota stone (greenish colour,mirror polished) slab flooring 20-25 mm thick over cement screed bed of 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slabcomplete all as specified and directed by Engr-in-Charge. |
| 33 | M&L for Machine pressed precast concrete interlocking paver block withgrey cement & pigment, glossy finish ,reflective type, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed laid over and including 25 mm thick fine sand cushion to a line and slope etc a complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified and directed by the Engr in charge. |
| 34 | M&L Machine cut pre polished kota stone 22-25mm thick inriser of step,skirting,dado and pillars etcjointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 10 mm thick backing coatin CM 1:4 complete all as specified and directed by the Engr in charge. |
| 35 | S&F in repairstainless steel kitchen plate rack made out of 0.63mm thick sheet of size 30\" X 36\" X 9\" of approved pattern & make and weight not less than 7.0 kg each fixed to wall with CP brass screw complete all as specified and directed by Engr-in-Charge. |
| 36 | S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratry with plugs, washers andwaste coupling fitting, including beading in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mm x 460mm ,bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge. |
| 37 | S & F in repair PVC valveless, syphonic action type, flushing cristern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle including brackets and connection to pipe complete all as specified and directed by Engr-in-Charge. |
| 38 | M & L in repair vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet , integral foot restsand anti syphonnage pipe including\"P\" or \"S\" trap and provn of lime concrete including all necessary connections complete all as specified and directed by Engr-in-Charge. |
| 39 | M & L in repair vitreous china wash down water closet semi pedestal pattern (Anglo-Indian type) white (excluding fixing bolts, flushing cistern and flush pipe) with\"P\" or \"S\" trap including all necessary connections complete all as specified and directed by Engr-in-Charge. |
| 40 | S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminisied hinging devices complete all as specified and directed by Engr-in-Charge. |
| 41 | S & F in repair vitreous chinawash hand basin white, flat back, size 450 x 300 mm size(flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed by Engr-in-Charge. |
| 42 | S & F 32 mm dia Waste fittings, brass chromium plated suitable for glazed ware sinks, wash basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge. |
| 43 | S & F LDPE PVC pipes of pressure rating 6 kgf/Sq.cm of 32/40 mm bore fixed complete to walls, ceiling or in floorsincluding bendand sockets etc; any type of pipe complete all as specified and directed by Engr-in-Charge. |
| 44 | S & F in repair pillar tap 15mm bore, cast copper alloy,with capstan heads, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. |
| 45 | S & F in repair Stop valves(ISI marked), 15mm dia cast copper alloy fancy type, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. |
| 46 | S & F chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge. |
| 47 | S & F600 mm x 450 mm bevelled edge mirror of selected quality glass decorative type,mounted on 6 mm thick BWP grade plywood,fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed by Engr-in-Charge. |
| 48 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Engr-in-Charge. |
| 49 | Supply & fixing in repairs powder coated aluminiumsections for frame /track or shutters for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, cleats etc including all accessories such asglazing clips, handles, tower bolts, rollers rubber beadings for fixing glass panes in frame including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specifiedNote: - (i) Glass panes will be measured & paid separately. (ii)The rate quoted shall be inclusive of neoprene beading, glazing clips, screws, etc. as requiredbut shall not be measured for arriving of weight.(iii) Minimum thickness of powder coating shall be 25 micron. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel around contacting surface of aluminium work with matching existing area.(v)The size of aluminium sections shall be as perHQ CE(N) MZ TD drawing No TD/2021/01 to 05 . |
| 50 | M&L aluminium anodisedgrill with suitable aluminium anodised frame section manufactured by M/S Deco grill pattern DG-102 (80 x 66 mm aperture ) complete all as specified and directed by Enginner-in-Charge. |
| 51 | S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F 4mm thick Figured glass , pin headed type and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge. |
| 53 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and directed by Engr-in-Charge. |
| 54 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out ofM.S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame complete all as specified and directed by Engr-in-Charge. |
| 55 | Taking down shutters of any description exc 1sqm but n exc 2sqm each complete all as specified and directed by Engr-in-Charge. |
| 56 | S & F factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F 35mm thick second class hard wood rail & stile factory made plain framed panelled shutters (two or three panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board of medium density with commercial veneering on both faces.The size of rail shall be as per IS 1003 (Part-I)kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge. |
| 58 | S & F 35 mm thick factory made flush shutters, solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed by Engr-in-Charge. |
| 59 | S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)oraluminium wire staples and removing old beading,complete all as specified and directed by Engr-in-Charge. |
| 60 | Taking down shutters of any descriptionexc 2 sqmeach with all fittings complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F 40 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed |
| 62 | S & F 100mm size stainless steel medium weight butt hinges(ISI marked) complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F in repair 100mm size stainless steel medium weight butt hinges (ISI marked) complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F 125 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F 150 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F in repairs 150 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F in repairs 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge. |
| 70 | S&F in repairs 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge. |
| 72 | S&F in repairs 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge. |
| 73 | M&L for preparation of new wooden surface of any description over 10 cm width or girth not otherwise described and applying two coat synthetic enamel paint over a coat pink primercomplete as specified and as directed by Engr-in-Charge. |
| 74 | Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and directed by Engr-in-Charge. |
| 75 | S & F CI soil/waste/vent pipe in any length with ears 100mm bore (sand cast) in any length with cement joints fixed towall with clampspacing 1.5mm c/c as per CE (Navy) mumbai TD No :TD/2023/01 complete all as specified and directed by Engr-in-Charge. |
| 76 | S & F CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed towall with clampspacing 1.5mm c/c as per CE (Navy) mumbai TD No :TD/2023/01complete all as specified and directed by Engr-in-Charge. |
| 77 | S & F CI bends (any radius) for soil/waste pipes 100mm bore diminishing pieces or tapers (larger bore measured)on walls complete all as specified. |
| 78 | S & F CI bends (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers (larger bore measured) on walls complete all as specified. |
| 79 | S & F CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 100mm bore pipe (Y or T) all as specified and directed. |
| 80 | S & F CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 75mm bore pipe (Y or T) all as specified and directed. |
| 81 | Taking down PVC rain water pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and directed by Engr-in-Charge. |
| 82 | Supply & Fixing160mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracketsuitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified. |
| 83 | S & F PVC (SWR) bends 160mm bore any radius complete all as specified and directed by Engr-in-Charge. |
| 84 | Demolition of RCC chajjas/drops/fins thickness exc 10 cm but not exc 15 cm,with width of chajjas varrying from 45cm to 75cm cutting straight, mechanically/ by means of RCCcutter machine, trimming the chajjas projections upto 15 cm from external surface of wallscomplete all as specified and as directed by Engineer-in -Charge. |
| 85 | M & L for providing & fixing of factory made Fibre glass Reinforced Plastic (FRP) \"chajja\"- 4mm thick of \"fibreways\" brand in required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology available with laminated single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 Nos vertically and 1 No horizontally 50x2mm thick MS Flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealedin the wall complete in one single piece casted monothically including all necessary fittings. Molded with unsaturated Polyster resin as per IS: 6746 duly reinforced with fibreglass chopped strand mat (CSM) as per IS: 11551. FRP chajja should be available with protective gel coat U/V coating on top for complete resistance from the extreme of temperature, weather & sunlight fixed with and incl through fastner of adequate size (as approved by GE) complete all as specified and directed by Engr-in-Charge. |
| 86 | M & L for Chipping, removing carefully concrete work by low impact hammer, breaker without damaging the existingstructure & cleaning and disposal of debris out side the MoD Land etc complete all as specified and directed by Engr-in-Charge.(Hard concrete should not be removed by force.) |
| 87 | Material & Labour for cleaning ofexisting reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTMB-117 on the existing rebars and allowing it to react with rustfor 6 hrs and form a corrosion resistant, insoluble and adherent protective layer, including cleaning the reinforcement, wire brushing to remove loose rust spalls, wash the rebars with clean water within 1 hrs and wipe it dry complete all as specified and directed. |
| 88 | M&L for providing and fixing additional steel bar or stirrups of diameter matching withvarious structural elements like columns, beams and foundations including drilling, bending and fixing the bars with epoxy putty etc complete all as specified and directed by Engr-in-Charge. |
| 89 | Providing and application of hitech concrete penetrating, water based, organic, Bi-polar, calcium nitrite free, migratory corrosion inhibitor on concrete surface having Ph 9.5 which migrates to a virtual extent of 100 mm inside concrete through pores, to inhibit the corrosion process on embedded steel at both anodic and cathodic ends by depassivating the Electro-chemical reaction in that region thereby protecting rebar on all sides,complete all as specified in manufacturer\"s instructions. |
| 90 | Providing and application full and unbroken coating of anticorrosive protective zinc rich epoxy coating on expose reinforcement in two coats with time interval of minimum 1 hours between each coat including mixing of both components by weight as per manufacturer\"s specifications, brush application, curing to form a anticorrosive protective coating with high mechanical strength to cementitious repair works, etc complete all as specified and directed by Engr-in-Charge. |
| 91 | Mixing and applying SBR latex modified cementitious bond coat using cement and gauging solutuion at2.2 kg per square metre on prepared concrete surfaces of parent material complete all as specified and as directed(Note: SBR latex shall be paid for separately). |
| 92 | Mixing and applying SBR latex modified cement mortar 30 mm thick in cement sand mortar in proportions of 1:3 (1 cement andquartz aggregate) with polymer admixed in proportions as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed |
| 93 | Supply only approved SBR Latex polymer. |
| 94 | Material & Labour for Rebuilding the section of damaged RCC elements to required size with avg thickness 50 mm by providing and casting with microconcrete of grade M-40 and above ,all lead lift, mixing, placing, deshuttering, levelling the surface by grinding off cementitious slurry or construction joint differences if any to satisfaction of Engr -in- charge,etc. complete all as specified and directed.Note for item No 86.00 to 94.00- Work shall be executed through approved applicator of the chemical manufacturer and original paid Vr and TC shall be submitted by the contractor at the time of claiming any payment. After completion of work certificate of the manufacturer shall be submitted by the contractor. |
| 95 | M&L for 20 mm thick plasteringin two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement all as specified including scaffolding, Safety net etc complete all as specified and directed by Engr-in-Charge. (Note :- WPC shall be measured and paid separately) |
| 96 | Supply only integral water proofing compound of approved make as per ISI. |
| 97 | Material & Labour for preparation of old decorated surfaces of wall, soffits, roof facia and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed by Engr-in-Charge. |
| 98 | M & L for Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives of required shade : New work (Two or more coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 99 | Easing of door/windows (Complete for one no of door or window) shutters of any size/any number of pannels for easy closing/opening tightning of hinges or changing the position of hinges adjustments of lower bolts, Sliding bolts etc complete all as directed. |
| 100 | S&F magic eye fancy type of brass for door including drilling cutting of holes and making good complete all as specified and directed by Engr-in-Charge. |
| 101 | S&F for in repair 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work incl 18/19mm wide and 6mm thick external teak wood lipping fixed with nails and glued to board as in cup board shutter, CB shelves and kitchen cabinate etc like similar work complete all as specified and directed by Engr-in-Charge. |
| 102 | Taking down chowkats with shutter (without taking shutter from the frame)exc 1.5 sqm each but not exc 4 Sqm each complete all as specified and directed by Engr-in-Charge. |
| 103 | S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge. |
| 104 | S&F mild steelhold fasts, wall ties and similar small articlesconforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge. |
| 105 | M&L Providing PCC 1:2:4, type B1(20mm graded stone aggregate) for hold fasts complete all as specified and directed by Engr-in-Charge. |
| 106 | Material and Labour for protecting the roof including parapet wall with water proofing coating complete as specified below :-Supply and applying high performance polyurea polyurethane elastomeric waterproofing coating cold applied by spray /brush , smart care ultron liquid membrance with an elongation of 600% and tensile strength not less then6.0 N/Sqmm as per ASTM D 2370, crack briding ability of 3mm as per ASTM C 1305, shore a hardness of min 75 as per ASTM D 2240. The system included final base prepraration epoxy primer application and applying smart care ultron or approved equivalent in two coats at 1.2 kg/sqm each coat complete all as per manufacturer specification and instructions including water proofing treatment to rain water spouts of entire roof terrace by opening of all the existing failed loose pipes and its joints ( in old structure) , replaceing the same by an appropriate dia pipe ( not less then 110mm) followed by application of two coats polymer polyurethane elestomeric water proofing coating to ensure leakage free joints ( work included filling of mortar and marking good the same) and top surface finished with UV resistant top coat as manufacturer instruction complete all as specified and directed by Engr-in-Charge. . |
| 107 | Systematicaly cleaning and desilting of pipe sewers of any dia including man holes and gully trap of any size and depth by passing knots , bambboo, kamti and disc of required size , pumping out liquid waste / sewage , plugging diverting the flow in the drain , if necessary and stacking the removed silt / sludge in deposits as directed including taking precautionary measures such as safty belts , dry cells , torch for lighting in side the manholes and drain etc, sprinkling bleaching powder on the silt / sludge removed to avoid bad smell and disposal of silt out side MD land complete all as specified and directed. |
| 108 | M&L for Cleaning the blockage in Floortrap, Nahani trap, Gully trap, WC \"P\" trap or \"S\" trap and refixing the same after cleaning the pipes making good damaged cement joints , dia of pipe n. exc 150 mm all as specified and directed. |
| 109 | M&L for cleaning eye ( oval access door) for bends , branchs ,sections etc of dia n. exc.100mm at any floor level. |
| 110 | M&L for Cleaining the blocked manholes upto 4.5m depth by mannually/jetting & suction machine all as specified and directed |
| 111 | Supply and Fixing in repair steel water tubing, galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends, fixed to wall and ceilings including necessaryin short piece/length, including breaking the existing brick wall for replacement of corroded GI pipe in/on wall and making good the disturbed surfaces complete all as specified and directed by Engineer-in-charge. |
| 112 | 80 mm bore |
| 113 | 50 mm bore |
| 114 | 40 mm bore |
| 115 | 25 mm bore |
| 116 | 20 mm bore |
| 117 | 15 mm bore |
| 118 | Supplying and laying in repair CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings in trenchescomplete all as specified and directed by Engr-in-Charge. |
| 119 | Supply and fix in repairs in existing line, gun metal, gate valve(ISI marked) with iron wheel head screwed both ends for iron pipe and fixed including fittingscomplete all as specified and directed by Engineer-in-Charge with following sizes :- |
| 120 | 15 mm bore |
| 121 | 20 mm bore |
| 122 | 25 mm bore |
| 123 | 40 mm bore |
| 124 | 50 mm bore |
| 125 | 80 mm bore |
| 126 | S & F in repairs of Bronze pressure reducing valve screwed ends for 25 mm bore GI pipe, suitable for a maximum inlet pressure of 20 Kg/cm2 reduced to 0.5 to5.5 Kg/cm2, valves incorporates inherent design advantages like noise free working, an metal construction, reversible double re-inforced food grade EPDM rubber (Colour coding Black) Diaphragm cover, stainless steel bolts etc valve are calibrated for a maximum inlet pressure of 20 Kg/cm2complete all as specified and directed by Engr-in-Charge. |
| 127 | Supply and fix in repair of Stop valves 15 mm bore, fancy type, chromium plated with long shank and cup cast copper alloy (Concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. |
| 128 | Supply and fix in repair of Fancy type Bib taps 15 mm bore surface fixing, Chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 129 | Supply & fixing in repair PVC loft tank (LDPE) of capacity 275 ltrs with complete fitting including 03 Nos adopter with washer for inlet/outlet, over flow as per manufacturerers instructions including brass float valve of size 15 mm complete all as specified and directed by Engineer-in-Charge |
| 130 | Supply and fix in repair PVC profile suitable for 275 ltrs loft tank including fixing of aluminium channel around the profile complete all as specified and directed. |
| 131 | M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed by Engr-in-Charge. |
| 132 | Supply and fix in repair of Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms)complete all as specified and directed by Engr-in-Charge. |
| 133 | Supply and fixing in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed by Engr-in-Charge. |
| 134 | Supply and fixingin repairsPVC insulated, PVC sheathed, armoured, FRLS, 1100Vgrade, 6 core 1.5 sqmm stranded copper conductor electric cable laidon wall/ roof/ duct with saddles not more than 60 cm intervalscomplete all as specified and directed by Engr-in-Charge. |
| 135 | Supply and fixingin repairsPVC insulated, PVC sheathed, armoured, FRLS, 1100Vgrade, 5 pair 0.5 sqmm stranded copper conductor electric cable laidon wall/ roof/ duct complete with saddles not more than 60 cm intervalscomplete all as specified and directed by Engr-in-Charge. |
| 136 | Taking down carefully of SCADA control panel-01 No, motorised valves-16 Nos before starting the special repair work, kept in safe custody without any damage and refixing as per previous location and testing after completion of special repair work at site all as specified and directed by Engr-in-Charge. |
| 137 | M&L for taking down andservicing of Motor Actuated Ball Valve consisiting of suitable single phase Actuator and ball valve of size 40/50/80 mm diaand refixing the samecomplete all as specified and directed by Engr-in-Charge. |
| 138 | S&F in repair Rotational moulded multilayer (minimum three layer) polyethylene water storage tank of 5000 Ltrs Capacity confirming to IS12701(1996) hoisting and fixing in position at any location includingdistmantling existingRCC/PCC OHT andmaking new foundation as well as disconnecting all incoming & out going connection, provision of new tank fittings & connecting it at existing position up to 50 mm GI Pipe connection including replacement of tank nipples and GI fittings as required at site, new 40 mm Float valve with complete fitting , provision of PCC blocks under the delivery line on roof complete all as specified and directed by Engr -in- Charge. |
| 139 | Supply and fixing in repairsPVC water storage Tank 3000 ltr capacity 3 layers , ISI marked, hosting and fixing in position at any location disconnecting all incoming & out going connection , provision of new tank fittings and float valve & connecting it at existing positionup to 50 mm GI Pipe connection completeall as specified and directed. |
| 140 | Supply and Laying in repair of CPVC pipes(green/blue colour) of size 100mm (inner dia) CPVC Schedule 80 pipe & plain CPVC & Schedule &80 fittingswith all fittings in on walls, ceilings or laying in floors with fittings like brass elbow, brass tee, male brass Threaded adopter (MTA/MBTA), female brass Threaded adopter (MTA/MBTA), tank adopter Union, ball valve, CPVC flange etc. having thermal stability for hot/cold/RAW water supply including all as specified and directed by Engr-in-Charge. Note (ii) Work will be executed up to the G+14 Floor |
| 141 | Supply and Laying in repair of CPVC pipes(green/blue colour) of size 75mm (inner dia) CPVC Schedule 80 pipe & plain CPVC & Schedule80 fittingswith all fittings in on walls, ceilings or laying in floors with fittings like brass elbow, brass tee, male brass Threaded adopter (MTA/MBTA), female brass Threaded adopter (MTA/MBTA), tank adopter Union, ball valve, CPVC flange etc. having thermal stability for hot/cold/RAW water supply including all as specified and directed by Engr-in-Charge. |
| 142 | Supply and Laying in repair of CPVC pipes(green/blue colour) of size 50 mm (outer dia) SDR 11 & Plain CPVC SDR 11 & plain CPVC & Schedule 80 fittingswith all fittings in on walls, ceilings or laying in floors with fittings like brass elbow, brass tee, male brass Threaded adopter (MTA/MBTA), female brass Threaded adopter (MTA/MBTA), tank adopter Union, ball valve, CPVC flange etc. having thermal stability for hot/cold/RAW water supply including all as specified and directed by Engr-in-Charge . |
| 143 | Supply and Laying in repair of CPVC pipes(green/blue colour) of size 25 mm (outer dia) SDR 11 & Plain CPVC SDR 11 & plain CPVC &Schedule80 fittingswith all fittings in on walls, ceilings or laying in floors with fittings like brass elbow, brass tee, male brass Threaded adopter (MTA/MBTA), female brass Threaded adopter (MTA/MBTA), tank adopter Union, ball valve, CPVC flange etc. having thermal stability for hot/cold/RAW water supply including all as specified and directed by Engr-in-Charge. |
| 144 | Supply and Laying in repair of CPVC pipes(green/blue colour) of size 20 mm (outer dia) SDR 11 & Plain CPVC SDR 11 & plain CPVC & Schedule 80 fittingswith all fittings in on walls, ceilings or laying in floors with fittings like brass elbow, brass tee, male brass Threaded adopter (MTA/MBTA), female brass Threaded adopter (MTA/MBTA), tank adopter Union, ball valve, CPVC flange etc. having thermal stability for hot/cold/RAW water supply, complete all as specified and directed by Engr-in-Charge. |
| 145 | S&F in repair in Sluice valves 80mm flanged end, cast iron body, flanged and drilled and rising type Steel spindle with nut, long body, class PN 1.6, conforming to IS 14846 of 2000 in any position/locationwith rubber or fiber board gaskets, bolts, nuts, washers, welding etc complete by pumping out accumulated water complete all as specified and directed by Engr-in-Charge.Note :- For Additional manpower, welding, chipping, plastering and any other item required for replacement of the item including making good the disturbed surfaces are deemed to be including in the item rate and no extra payment will be claimed by the contractor to the work. |
| 146 | Dismantling of existing connection and taking out pressure reducing valve of size 25 mm bore for cleaning servicing and refixing at existing location in high rise buildings (G+14) including provision of fittings, i.e. union, elbow, bend, nipple, etc. complete all as specified and directed by Engr-in-Charge. |
| 147 | Supply and fix in repair brass float valve (ISI marked) high pressure with polythelene float (flat) and fly nut complete screwed for GI pipe 15mm bore including necessary GI fittings such as elbow, reducer, nipple etc complete all as specified and directed by Engr-in-Charge. |
| 148 | Ditto- as per item No 135.00 above but for GI pipe 20 mm bore |
| 149 | Ditto- as per item No 135.00 above but for GI pipe 25 mm bore |
| 150 | Ditto- as per item No 135.00 above but for GI pipe 40 mm bore |
| 151 | M& L for Cleaning of loft tanks of capacity 275 ltrs in existing position by mechanised pressure, cleaning using PVC tank cleaning solution and draining out the water by wet vaccum pump, rinsing with clean drinking water and providing sticker showing the date of cleaning complete all as specified.Note :Any damage to pipe and PVC tank during cleaning shall be made good by the contractor at his own cost. |
| 152 | Supply & fix in repair for lid cover for PVC water storage tank complete with accessories for closing and locking arrnagement suitable for 5000 Ltrs as approved by BMC complete all as specified. |
| 153 | Supply & fix in repair for lid coverfor PVC water storage tank complete with accessories for closing and locking arrnagement suitable for 1000/2000 Ltrs as approved by BMC complete all as specified. |
| 154 | Taking down GI tubing fixed to wall at location cleaning and refixing the same with including suitable size of GI clamp, nut, bolt, washers on wall/floor/shaft of bldg including provision of necessary fitting in high rise building (G+14 stories) for the following:- |
| 155 | 15 mm bore |
| 156 | 20 mm bore |
| 157 | 25 mm bore |
| 158 | 40/50 mm bore |
| 159 | M&Lfor Checking of over head tanks of any capacity, making arrangement of mosquito proofing of the tank from overflow side with new GI tank nipples, socket, barrel nipple, elbow, MS wire net, locking the existing tank cover to avoid entry of lizards, mosquitos inside the tank, tightening of all inlet and out let connections to make the tank no leaking of water complete all as specified Note: Rates are deemed to include cost of wiremess, birebed wire, nut, bolt, washer for tightening of lid cover and anti-mosquto net proofing. |
| 160 | Cleaning of PVC and RCC water storage tank in high rising buildings(G+14) by mechanical high pressure spray and remove all foreign matter completly and soaking out the water/dirt with a high pressure wet vaccum pump and removing spoils out side of MD land and complete all as specified and as directed by Engineer-in-charge. Note: Rate include the painting of two coats of enamel paint with visible colour about date of cleaning and due date for cleaning complete all as specified. |
| 161 | OH Tank of capacity 5000 Litres |
| 162 | OH Tank of capacity 2000 Litres |
| 163 | Taking down carefully copper/ aluminium point wiring i.e. light, fan, socket or power/pointscomplete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc completeall as specified and directed Engr-in-Charge. |
| 164 | Material and labour for concealed point wiring complete with proper colour coding using, 1100 volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor conforming to IS-694, part-II, ISI marked and including PVC casing and caping not less than 25 mm size, ISI mark with all accessories on wall/ceiling/floor/roof etc, including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for the following :- NOTE :Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm. |
| 165 | One light/Exhaust/Ceiling fan point controlled by one switch. |
| 166 | One light point controlled by two two-way switch |
| 167 | One 3 pin socket outlet, 5 Amps on the same board with other switches |
| 168 | One 3 pin socket outlet, 5 Amps, onindependent board |
| 169 | One bell point controlled by one push button |
| 170 | Ditto- as per item No 146.00above but with 2.5 sqmm cable for one three pin 15 Amps socket out let controlled by one switch complete all as specified and directed by Engr-in-Charge.. |
| 171 | S & F in replacement with modular switch, 1 module, single pole one way 6 Amp conforming to IS:3854 and ISI marked complete all as specified and directed by Engr-in-Charge. |
| 172 | S & F in replacement with modular socket 6A, 3 pin, 2 module conforming to IS:1293 : 2019 and ISI marked complete all as specified and directed by Engr-in-Charge. |
| 173 | S & F in replacement with modular switch, 1 module, single pole one way 16 Amp conforming to IS:3854 and ISI marked complete all as specified and directed by Engr-in-Charge. |
| 174 | S & F in replacement with modular socket 6/16A, 3 pin, 2 module conforming to IS:1293 : 2019 and ISI marked complete all as specified and directed by Engr-in-Charge. |
| 175 | S & F in replacement with modular stepped type fan regulator, 2 module, single pole one way ISI marked complete all as specified and directed by Engr-in-Charge. |
| 176 | S & F in replacement with modular bell push switch, 1 module, single pole one way 6Amp ISI marked. Make - |
| 177 | S & F in replacement with modular switch, 1 module, single pole two way 6 Amp conforming to IS:3854 and ISI marked complete all as direcred. |
| 178 | Supply & Fixing Retrofit LED lamp 7 Watts, min 110 lumen/watt complete all as specified and directed by Engr-in-Charge. |
| 179 | Supply & Fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 180 | S & F in repairsmodular PVC Gangbox of 8 module, ISI marked for mounting of modular switches and sockets including blank plate for blank module complete all as specified and directed by Engr-in-Charge.. |
| 181 | Ditto- as perItem No- 157.00 above but of modular PVC Gangbox, 4 module. |
| 182 | Ditto- as perItem No-157 .00 above but of modular PVC Gangbox, 3 module. |
| 183 | Ditto- as perItem No- 157.00 above but of modular PVC Gangbox, 1/2 module. |
| 184 | Supply & fixing Modular white cover plate with Frame 8 Module complete all as specified and as directed Engr-in-Charge. |
| 185 | Supply & fixing Modular white cover plate with Frame 4 Module complete all as specified and as directed Engr-in-Charge. |
| 186 | Supply & fixing Modular white cover plate with Frame 3 Module complete all as specified and as directed Engr-in-Charge. |
| 187 | Supply & fixing Modular white cover plate with Frame 1/2 Module complete all as specified and as directed Engr-in-Charge. |
| 188 | Supply and fix in repairs LED batten fitting 20 Watt (min 120 lumen/watt), 240V, 4ft CDL/NW comprises of extruded channel in thermally conductive material with decorative end cap and high translucent serration milky white diffuser of high optically efficient plastic FR grade. The luminaire should bepre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings including ceiling rose. The contractor shall provide test certificate from authorized lab complete all as specified and as directed Engr-in-Charge. |
| 189 | All as per Item No-165.00 above but Slim LED integrated batten of 10 Watt 2ft complete complete all as specified and as directed Engr-in-Charge. |
| 190 | S&F in repairs 10WLED batten with inbuilt smart motion sensor, 230 Volt , 50 Hz , 2 feet, polycarbonate extruded channel, powder coated with diffuser for glare free light, Inbuilt motion sensor prewired with 25% dimmer illuminous in ideal timewith all accessories including two Nos of PVC box of size 75x75x20mm for mounting light fittings including ceiling rose complete with following specification.(i) Housing-polycarbonate extrusion,Diffuser- opal- polymer, LED type- MID power ,Light distribution- general Spread, LED efficiency - > 130 lumen/Watt, System effieciency- > 100 lumen/Watt, Driver efficiency - more than 85%, power factor- more than 0.95, THD - <10%, Mounting/Fixing- Wall/Ceiling, Ingress Protection - IP-20, Sensor type- HF inbuilt integral occupancy/movement sensor, sensor range- upto 5 mtrs(cone formation ), Dimming operation- default operation at 25% of the is rated value. On detection of motion, light output rises to 100% for upto 20 sec . in absence of motion switches back to default operation, LED life- upto 30,000 Hrs.Surge Protection- not less than 1KV complete all as specified and as directed Engr-in-Charge. |
| 191 | S&F in replacement MCB DB SPN conforming to as per IEC 61439-3 and IP 43, IK 09 with acrylic door,8 waycomplete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces by plastering or PCC work inclding distempering to the affectedwalls complete all as specified and as directed Engr-in-Charge. |
| 192 | Supply and fixing in repairsMCB SPN 32 Amp 10 kA, 230 Volts completeall as specified and directed by Engr-in-charge |
| 193 | Supply and fixing in repairsMCB single pole upto 20 Amp, 10 kA, 230 V,AC completeall as specified and directed by Engr-in-charge |
| 194 | S & F in repairs PVC insulated, PVC sheathed, armoured, FRLS, 1100Vgrade, stranded copper conductor electric cable of size 2 core 6 sqmmlaidon wall/ roof/ duct complete with proper saddling and connecting to DBs with glands complete all as specified. |
| 195 | Taking out & Overhauling of ceiling fan any size and Make, dismantling parts, properly cleaning/removing old existing grease oil and applying new oil grease, varnishing of winding, cleaning dust rust and replacing petty items with new as required such as Nuts, Bolts, washers, bushes, ball bearing, cap, fan shaft, rotor, capacitor 2.5/4 Mfd, body cover etcand assembling and connecting complete with copper conductor multi stranded 3 core wire of size 14/0.0076 including one coat of painting and testing after refixing at site complete all as specified and as directed by Engr-in-Charge. Note: Rate of petty items to be replaced shall be included in quoted rate. |
| 196 | S & F in repairs with Analog time switch 3P Module, 24 hours program, programmable every 15 min., backup of 100 hours, current capacity 16A for ON/OFF controlling of security lights complete all as specified and as directed by Engr-in-Charge. |
| 197 | S & F in repairs power contactor 3 pole AC, with 240 volt coil, 32 Amp ratingconforms to IS / IEC 60947-4-1 for ON/OFF controlling of security lights complete all as specified and as directed by Engr-in-Charge. |
| 198 | S & F in replacement with ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x50mm complete all as specified and as directed by Engr-in-Charge. |
| 199 | S & F in repairs electric bell ding dong, AC, 230V single pole complete all as specified and as directed by Engr-in-Charge. |
| 200 | S & F in replacement with capacitor 2.5Mfd in ceiling fan of1200/1400 mm sweep complete all as specified and as directed by Engr-in-Charge. |
| 201 | Supply and Fix in repairs of 15mm dia MS clamp assembly with Nut, Bolts & rubber bush suitable for down rods and split pins complete all as specified and as directed by Engr-in-Charge. |
| 202 | M & Lin repairs for fabrication of fan hook made out ofSS rod and bend to shape \"S\" complete all as specified and as directed by Engr-in-Charge. |
| 203 | Taking down old unserviceable security light fittings from any height and Supply & fixing LED security light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 4500 lumens and suitable wattage for efficiency not less than 110 lumens/Watt) min wattage 45 watt,with ingress protection IP 65/66 and SPD of capacity 5 KV etc incl necessary clamps etc completeand testing on completion all as specified and as directed. Note: The GI pipe bracket if requiredwill be measured and paid separately under relevant schedule items. |
| 204 | Taking down deterioted louvers and supply and fix new louvers, fixed type made out of 1.6 mm GI sheet with horizontal ventilation, bending into shape of size 45cmx45cm(outer) with 20x3mm flat iron base of size 45cmx45cm complete by providing of fixing arrangement for louvers upto 5th floor of including rate all as specified and directed by Engr-in-Charge. |
| 205 | Overhauling of Exhaust fan any size and Make, dismantling parts, properly cleaning/removing old existing grease, oil and applying new oil grease, varnishing for winding, cleaning dust, rust and replacing petty items with new as required such as Nuts, Bolts, washers, bushes, ball bearing, cap, fan shaft, rotor, capacitor 2.5/4 Mfd, body cover etcand reassembling, connecting with copper conductor multi stranded 3 core wire of size 14/0.0076 complete and testing after refixing at site. Note: Rate of petty items to be replace shall be included in quoted rate. |
| 206 | Supply and fixing inrepairs with ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified. Note : Old unserviceable ceiling fan will be deposited in MES store. |
| 207 | Supply and fix in repairsExhaust fan, metallic blade, heavy duty, double ball bearing, 230V, 50Hz,300mm sweep having power input 70W speed 1440RPM including connection as required at site with flexible copper cable all as per specified and directed.Note : Old unserviceable exhaust fan will be deposited in MES store. |
| 208 | Material and labour for earthing with steelearth plate electrode ofsize 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6 mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, GI medium grade pipe 40 mm bore protection pipe upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified orindicatedincludingtesting on completion. NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth wire upto 7.5 m long for connecting totest point etc. all as required at site for complete earthing). |
| 209 | M & L in repairs for snap-on trunking system withcover, angles, bends andall fixing accessories and fittings of size 50x80 mm, on wall/ceiling surfacesand refixing of UG cables/submain inside the trunking and made connection as specified and directed. |
| 210 | Supply and fixing in repairsMCCB 100A, 25kA, 4P, Thermal magnetic release , Ics=100% Icu complete all as specified and directed by Engr-in-charge. |
| 211 | Taking down ceiling fan from site & rewinding of ceiling fan any size as per IS-13730 using super enameled copper wire of same guage and refixing the same at site after repair complete all as specified and as directed by Engr-in-Charge.Note:Canopy, bushes, bearing, capand fan blade if required to be change shall be deemed to be included in quoted rate. |
| 212 | Taking down ceiling fan of any size and preparing ceiling fan surfaces for painting by removing/cleaning dust and deposited material and applying two coats of white enamelled paint by spray to fan blades, body and down rod, canopy of ceiling fans and refixing the same at site complete all as specified and as directed by Engr-in-Charge. |
| 213 | Taking down exhaust fan of any size from site and rewinding of exhaust fan with superenamelled copper wire of same size/gauge, no of turns as on existing one , varnishing, oiling and greasing of any make of size 230/300/380mm sweep by dismantling its parts andreplacing petty items with new as required such as Nuts, Bolts, washers, bushes, ball bearing, cap, fan shaft, rotor, capacitor 2.5/4 Mfd, body cover andcleaning of exhaust fan body and its blade by cleaning agent, assembling, and connecting complete with copper conductor multi stranded 3 core wire of size 14/0.0076, and testing after refixing at site complete all as specified and as directed by Engr-in-Charge.Note: Rate of petty items to be replaced shall be included in quoted rate. |
| 214 | Taking down exhaust fan of any size from site and preparing exhaust fan surfaces for painting by removing/cleaning dust and deposited material and applying two coats of grey enamelled paint by spray to Exhaust fan body, blades and louvers and refixing the same at site complete all as specified and as directed by Engr-in-Charge |
| 215 | Supply and Fix in repairs of electronic control circuit card suitable for BLDC ceiling fan of existing make and existing modelcomplete all as specified and directed by Engr-in-Charge |
| 216 | M&L disconnecting, scrapping old worn out paint from complete indoor/outdoor type LT panels and painting with one coats of synthetic enamel paint (incl front door in side and indl compartment outer side etc also) over a coat of primer and spray painting complete including fixing sticker danger sign board suitable for LT panel board and energizing all as specified and as directed by engr-in-charge. |
| 217 | Supply and fixing in repairs including installation, testing & commissioning of micro processor based 2 wire fault tolerant loop, required loop net workable type 2 loop (each loop accessing maximum 99 detectors and 99 modules) fire alarm/detection control panel.The panel shall be able to give location of all fire/fault signal with address.The panel shall have rectifier, loop cards, 80 character LCD unit to indicate Fire/Fault signal with address.The panel shall have a built in power supply and battery charger alongwith maintenance free 7.2 AH, 2x12 volt SMF lead acid batteries capable of running for a minimum of 48 hours with battery charger complete as required and as per specifications duly approved by EN 54 complete including of all 15 Amp power point connection from meter room to fire control panel complete all as specified and directed by Engr-in-Charge.Make :- Morley IAS by Honey well model No DXC2/714-001-225 or Bosch Model No FPA-1000-V2 of Schneider Cat No FFSULH 1002 model No ESM Ultima. |
| 218 | Supply & fixing in repair single headed outlet hydrant valve 100mm having 65mm outlet with lock pin wheel , ISI Marked complete all as specified and directed by the Engr-in-chargeMake:-Minimax/Safex/DUNLOP |
| 219 | Supply & fixing in repair double headed outlet hydrant valve 100mm having 65mm outlet with lock pin wheel , ISI Marked complete all as specified and directed by the Engr-in-chargeMake:-Minimax/Safex/DUNLOP |
| 220 | Supply & fixing in repaircanvas fire hose 63mm bore 15 m long confirming to IS 636-1988 having male/ female brass coupling both end complete all as specified and directed by the Engr-in-charge. Make:-Minimax/Safex/DUNLOP |
| 221 | Supply and fix in repairs branch pipe stainless steel nozzle of 20 mm x63mm dia for canvas hose pipe confrming to IS 8090 all as specified and directed by Engr-in-Charge.Make:-Minimax/Safex/DUNLOP |
| 222 | Material and labour factory fabricated Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge suitable for fitting two nos hose pipe of length 15 mir each, branch pipe (nozzle) coupling etc sheet painted fire red out side and brilliant white inside yard fixed on wall with necessary nutsbolts or welding to existing MS pipe by supporting angle complete all specified. |
| 223 | Supply & fix in repair hose Reel drum swivel type suitable for and including 30 mtrs X. 20 mm dia rubber hose pipe confirming to IS-884 complete all as specified and directed. Make:-Minimax/Safex/DUNLOP |
| 224 | Supply and fix in repairs branch pipe with nozzle (Shut off) of 20 mm dia for hose reel conforming to IS 8090 all as specified and directed by Engr-in-Charge. |
| 225 | Supply and fix in repairs 100 mm bore hand operated butterfly valve pressure not less than 15 kg/sqcm with complete setall as specified and directed by Engr-in-Charge. |
| 226 | Supply and fix in repairs SS fire brigade inlet connection for connected external fire hydrant ring main consisting of two nos 63 mm dia instantaneous type male coupling with built in check valves and 100 mm dia, flanged outlet complete with all accessories. Make:-Minimax/Safex/DUNLOP |
| 227 | Supply, replacement, Installation, Testing & Commissioning of Addressable Type Manual Call Point complete all as specified and and directed. Make:-Minimax/Safex/DUNLOP |
| 228 | Supply fix in replacement, Installation, Testing and Commissioning of Addressable electronic sounder cum strobe complete all as specified and and directed. Make:-Minimax/Safex/DUNLOP |
| 229 | “Supply and fix in repair Addressable Type Multi-Sensor Detector conforming to EN-45 standards, comprising photoelectric/optical smoke sensing and heat sensing elements, complete with detector base and in-built intelligent processing as per IS:11360. Detector shall be compatible with existing addressable fire alarm loop configuration and shall be installed and commissioned complete as specified and directed.Make: Bosch / Morley / Apollo / GST / Agni / Ravel.Note: All necessary loop cards, modules, and circuit connections required for proper integration and functionality of the detector with the existing fire alarm system shall be deemed included in the quoted rate. No extra payment shall be admissible to the contractor.” |
| 230 | Supply and fix in repairs MS ERW heavy-duty flanged pipe of 80 mm nominal bore, including all required fittings such as elbows, bends, sockets, tees, tail pieces, etc., complete with welding, threading, cutting and necessary earthwork for installation in a multi-storied building. Pipe and fittings shall be painted with two coats of synthetic enamel paint over one coat of zinc-chromate primer. Complete all as specified and directed by the Engineer-in-Charge. |
| 231 | Supply fix in replacement, Installation, Testing and Commissioning of Addressable electronic sounder cum strobe complete all as specified and and directed. Make:-Minimax/Safex/DUNLOP |
| 232 | Supply, installation in repair, testing and commissioning of a motor-actuated butterfly valve assembly comprising a wafer-type butterfly valve of 80 mm diameter fitted with a quarter-turn, single-phase electric actuator. The actuator shall be provided with suitable brackets/mounting hardware, two integral limit switches for OPEN and CLOSE positions, and a splash-proof enclosure. The complete unit shall be installed with all accessories, aligned, tested, and commissioned as specified and directed.”Technical Specifications / FeaturesInput Voltage: 230 V ACDesigned Line Pressure: 10 kg/cm²Operating Angle: 90° (quarter-turn)Disc Material: Cast iron with nylon coatingLimit Switches: 02 Nos. (OPEN/CLOSE indication)Communication Features:Built-in Serial / USB communication portBuilt-in data logger with memoryBuilt-in SD card slotAdditional Features: Space heater providedMounting Arrangement:Extended-type mounting with universal jointInstallation height 18–24 inches above ground levelIncludes angle mounting and raising of valve chamber where requiredMake: EMTORK / HASEL HOFENER / RITETORK / SIEMENS / HONEYWELL |
| 233 | Supply, installation in repair, testing and commissioning of Motor-Actuated Butterfly Valve comprising a quarter-turn, single-phase electric actuator mounted on a wafer-type butterfly valve of 50 mm dia, complete with suitable bracket and mounting arrangement. The actuator shall include two numbers of limit switches for fully open and fully closed positions and shall be housed in a splash-proof enclosure.Specifications & Features:Input Voltage: 230 V AC, single phaseDesigned Line Pressure: 10 kg/cm²Operating Angle: 90°Disc Material: CI with nylon coatingLimit Switches: 2 Nos. (Open & Close status)Communication: In-built Serial / USB communication portData Logging: In-built data logger with memory and provision for SD cardSpace Heater: Provided inside actuatorMounting Arrangement:Extended-type mounting with universal jointInstallation height: 18–24 inches above ground levelIncludes angle mounting frame and raising of existing chamber if requiredMakes:EMTORK / HASEL HOFENER / RITETORK / SIEMENS / HONEYWELL |
| 234 | Removal of debris outside MD land exc 1.5Km complete as specified and directed by Engineer_in_charge. |
| 235 | NOTE FOR ALL ITEMS-1. Work shall be carried in high rise buildings upto G+14 stories.2. The quoted rates shall includes providing scaffolding and safety measures including safety harness, nets etc.3.Contractor shall setup a complaint cell (in the space provided by the Engr-in-Charge) to deploy sufficient skilled and unskilled manpower (Painter, carpenter,Plumber,Electrician,Helper) to carryout work as per items listed in this Schedule in a time bound manner.Register for complaints shall be prepared & maintained by the contractor duly signed by Engr-in-charge apart from the online complaint redressal mechanics. The complaint cell team shall attend the complaint witihin 06 hours otherwise penalty of ₹200/hour of delay shall be imposed and decision of GE for the same shall be final & binding. 4. The quoted rates shall includes removing debries outside MD land (if any). |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
