Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M&L for PCC type C1,1:3:6using 20mm graded crushed stone agg,in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 2 | Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and directed. (Pidiproof of Dr.fixit or equivalent) |
| 3 | M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 4 | M&L for brickwork with old size fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 5 | M&L for20mm thick Granite (of any type) work(table rubbed and polished) for wall lining (veneering to wall) in cement mortar(1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and directed. |
| 6 | S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 7 | S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 8 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) area not exc. 1.5sqm each, including cutting holes for removing the hold fast,making good disturbed surfaces and removing materials from site of work complete all as specified and directed. |
| 9 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, including cutting holes for removing the hold fast, making good disturbed surfaces and removing materials from site of work complete all as specified and directed. |
| 10 | Taking down old unserviceable shutters of any description exc 1.00 but n.exe 2.00 Sqm each complete all as specified and directed. |
| 11 | S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 12 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing.(Note :- Door frame shall be water proof, termite proof, elegant andshould have excellent screws holding strength to fix hinges and hold doors properly for a long life)complete all as specified and directed. |
| 13 | S&F 100mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 14 | S&F 150mm aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 15 | S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) andfixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direcetd. |
| 16 | S&F 100mm Butt hinges,medium weight, cold rolled mild steel,complete all as specified and directed. |
| 17 | S&F 100mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed,type B-11complete all as specified and directed. |
| 18 | S&F 150mm size Extruded brass handles, fabricated type polished complete all as specified and directed. |
| 19 | S&F 150mm size aluminium handle cast typecomplete all as specified and directed. |
| 20 | M&L for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescomplete all as specified and directed. |
| 21 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe -410-W(Gde-E-250) quality-A. complete all as specified and directed. |
| 22 | M&Lfor 1.25mm thickpressed steel door frame of size 105mm x 60mm with one or more rebates including necessaryfixing lugs , hinges, lock strike plate etc complete all as specified and directed. |
| 23 | S&Ffor 1.25mm thick pressed steel frames125mm x 60mm for doors with one or more rebates includingnecessary fixing lugs, hinges, lock strike plate,etc.complete all as specified and directed. |
| 24 | S&F of Gl frame work of Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 25 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 26 | S&F Pre- painted coloured trapezoidal profiled Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding towall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed. |
| 27 | S&F Pre- painted coloured plain sheet Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding towall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP/ XRW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed. |
| 28 | M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire meshcomplete all as specified and directed.Note:- Fillets, metal frame work and G.I. wire mesh paid separately. |
| 29 | Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. |
| 30 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 31 | M&L for sheet glass, 4mm thick, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each panecomplete all as specified and directed. |
| 32 | M&L for sheet glass, 5.5mm thick, ordinary quality and glazing with oil putty/aluminium beading in squares exc. 0.50 Sqm each paneground or obscured or frosted, on one side complete all as specified and directed. |
| 33 | M&Lfor preparation of untreated new wood/wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 34 | M&L for preparing the back surfaces of chaukhats and treating them with tar or coal tar black paint complete all as specified and directed. |
| 35 | M&L for two coats of synthetic enamel paint over one coat of red oxideon new steel surfaces of any description over 10cm in width or girthincluding preparation of surfaces complete all as specified and directed. |
| 36 | S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified anddirected. |
| 37 | S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified anddirected. |
| 38 | Taking up or down steel tubing and connections,including cleaning for refixing or removal to store bore of pipe 15 mm complete all as specified and directed |
| 39 | Taking up or down steel tubing and connections,including cleaning for refixing or removal to store bore of pipe 20 mm complete all as specified and directed |
| 40 | S&F in repairfancy type, chromium platedstop valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed. |
| 41 | S&Fin repair PVC connectionspipe ,15mm dia size with PTMT nuts of length 600mm complete all as specified and directed. |
| 42 | S&F in repair for stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore of pipe complete all as specified and directed. |
| 43 | S&F in repair 75mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring jointslaid in trenches or in floors complete all as specified and directed. |
| 44 | S&F in repair 110mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring jointslaid in trenches or in floors complete all as specified and directed. |
| 45 | S&F in repair 110mm PVC (SWR)pipes single socketed in any length with rubber ring joints fixed to wallscomplete all as specified and directed. |
| 46 | S&F 75mm bore PVC (SWR) bends with rubber ring joints any radius complete all as specified and directed. |
| 47 | S&F110mm bore PVC (SWR) bends with rubber ring joints any radius complete all as specified and directed. |
| 48 | S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 49 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed |
| 50 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings,dressed stonework and precast concrete articles complete all as specified and directed. |
| 51 | Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions laid bedded and pointed in any mortaretc complete all as specified and directed |
| 52 | Demolition of cement concretein ground floorand paving n.exc 15 cm thickness( below or above ground level) complete all as specified and directed. |
| 53 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 54 | Dimantling of Asbestos cement (corrugated,semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed |
| 55 | Dismantlingwall and ceiling board( fiber, pulp, insulation, etc.) or insulation board/slab/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 56 | M&L for powder coated(minimum thickness of powder coating 50 micron)anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as speecified and directed.Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment.(ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wire cloth shall be measured and paid separately under respective items.(iii) The accessories (Aluminium mongries etc) required to be provided for window, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered and no extra cost will be paid. |
| 57 | M&L for powder coated(minimum thickness of powder coating 50 micron) Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as speecified and directed. |
| 58 | M&L for powder coated(minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.)complete all as speecified and directed. |
| 59 | M&L fornewly plastered surface of wall appying two coat of white or tinted oil bound distemper over one coat of alkali resistant priming paint including 01mm thick wall care putty etc complete all as specified and directed. |
| 60 | S&F 4 mm thick Non asbestos fiber cementbuilding boards, fixed or laid /inserted totimber /GI /Aluminium frame-work with screws as in ceiling complete all as specified anddirected. |
| 61 | M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of hardstanding and ramp and finishing the surface without using extra cement complete all as specified and directed. |
| 62 | M&L for Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface etc complete all as specified andand as directed |
| 63 | M&Lfor Non Skidceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to matchover and including screed bed or bedding layer 15 mm thick in cement mortar 1:6for laying floor finishes etc complete all as specified and directed |
| 64 | M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 65 | M&L forrendering 15 mm thick in two layers 10mm +5mm in cement mortar 1:4 on external surfaces of brick work or concrete surfaces with using WPC finishing the surfaces even and smooth without using extra cement complete all as specified and directed.Note:- WPC will be measured and paid separately under respective item of this schedule. |
| 66 | M&L for 5mm thick rendering in cement mortar1:3 over/soffit of chajja/ceiling, finished surface even and smooth without using extra cement complete all as specified and directed. |
| 67 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkai registant primer complete all as specified and directed. |
| 68 | M&L for preparation of newly plastered surfaces of ceiling and applying one coat of oil bound distember over a coat of primer white or any tint over 1mm thick plaster of paris complete all as specified and directed. |
| 69 | M&L for preparation of new undecorated surface of ceiling and applying two coats of white wash complete all as specified and directed. |
| 70 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 71 | S&F in repairs CP central basin mixer with U shaped round casted sprout with 450mm long baried houses complete all as specified and directed. |
| 72 | M&L for any size and type mesh aluminium anodised grills of approved designs complete all as specified and directed. |
| 73 | S&F in repair jet spray with 01 mtr PVC tube (Stainless steel) complete all as specified and directed. |
| 74 | S&F in repairs two way angle cock 15mm bore cast copper fancy CP alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 75 | S&F in repairs table top vitreous china wash hand basin ovel type basin white/ coloured, size 610 x560mm including CP waste coupling but excluding taps, waste chain & plug complete all as specified and directed. |
| 76 | Demolition of old existing unserviceable EWC seat and S&F western floor mounted one piece water closet ceramic western toilet/commode/European commode square with soft close seat cover white including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe etc complete all as specified and as directed. |
| 77 | S& F powder coated GI T-section of size 1\"x1\" (25x25mm,19 gauge or 1mm thick) in square pattern of grid size 2\"x2\"(600x600mm). The frame work is supported from the ceiling with the help of \"J\" hook and GI wire / ms rod of 4mm dia of required size to maintain proper level etc.The frame work is supportedon side walls with the use of powder coated GI L section of size 1\"x1\" (25x25mm) angle complete all as per manufacturer instructions, specified and directed. |
| 78 | M&L for providing and fixingDESIGNER PVC FALSE CEILING consisting of 600x600mm, 5mm (+0.25) thick plain ambossed PVC sheet of 600Kg/Cbm Density manufactured by ISO 9001-2008, certified company, used as panel insert in a frame work made using anodised aluminium T- section of sizes 1\"x1\" (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2\"x2\"(600x600mm). the aluminium frame work is supported from the ceiling with the help of \"J\" hook and GI wire/6mm MS rods of require sizes to maintain proper level etc. The aluminium framework is supported on side wall withthe use of aluminium L-section of size 1\"x1\"(25x25mm) angles etc. complete as specified by manufacturer & drawing and directed by Engr-in- Charge. |
| 79 | Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such asswitches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface ofwalls and floors etc complete all as specified and directed. |
| 80 | Taking down carefully main switches DB\"s/ MCB DB\"s and making good the disturbed surfaces of wallsetc complete all as specified and directed. |
| 81 | Taking down carefully copper / aluminium sub mainwiring including teak wood batten / conduit and making good the disturbed surface of walls directed. |
| 82 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor drawn through and incuding medium grade PVC conduit 20mm with all accessories such as elbow, tee, bend etc, ISI marked,concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including or modular metal flush box for fixing modular switch, socket etc and mild steel sunken boxes made out of 1.6 mm thick mild steel sheet metal with earth dolly and coated of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one way switch complete all as specified and directed. Note :- Switches, socket and fan regulators and modular box inner and outer cover plate to be measured and paid separately. |
| 83 | All as per item no 82.00 above but one bell point controlled by one bell Push |
| 84 | All as per item no 82.00 above but one 5 Amps socket out let point controlled by one switch on same board with other switches. |
| 85 | All as per item no 82.00 above but one 5 Amps socket out let point on independent board controlled by one switch. |
| 86 | All as per item no 82.00 above but one light point controlled by one, two way switch 5 Amps |
| 87 | All as per item No 82.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. |
| 88 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor drawn through and non metallic rigid PVC casing caping 20mm double lock system with all accessories such as elbow, tee, bend etc, ISI marked on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken boxes made out of 1.6 mm thick mild steel sheet metal with earth dolly and coated of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one way switch complete all as specified and directed. Note :- Switches, socket and fan regulators to be measured and paid separately. |
| 89 | All as per item no 88.00 above but one bell point controlled by one bell Push |
| 90 | All as per item no 88.00 above but one 5 Amps socket out let point controlled by one switch on same board with other switches. |
| 91 | All as per item no 88.00 above but one 5 Amps socket out let point on independent board controlled by one switch. |
| 92 | All as per item No 88.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. |
| 93 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor drawn through in existing conduit on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken boxes made out of 1.6 mm thick mild steel sheet metal with earth dolly and coated of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one way switch complete all as specified and directed. Note :- Switches, socket and fan regulators to be measured and paid separately. |
| 94 | All as per item no 93.00 above but one bell point controlled by one bell Push |
| 95 | All as per item no 93.00 above but one 5 Amps socket out let point on independent board controlled by one switch. |
| 96 | All as per item No 93.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. |
| 97 | Supply and fixing switch piano flush button single pole one way 5 amps, AC 240 Volts complete all as specified and directed. |
| 98 | Supply and fixing in repair switch piano flush button single pole one way 5 amps, AC 240 Volts complete all as specified and directed. |
| 99 | Supply and fixing socket outlet flush type 5 Amps, 5 pin, AC 240 Volts complete all as specified and directed. |
| 100 | Supply and fixing in repair socket outlet flush type 5 Amps, 5 pin, AC 240 Volts complete all as specified and directed. |
| 101 | Supply and fixing switch piano flush button single pole one way 15 Amps AC 240 volt complete all as specified and directed. |
| 102 | Supply and fixing in repair switch piano flush button single pole one way 15 Amps AC 240 volt complete all as specified and directed. |
| 103 | Supply and fixing socket outlet flush type multipurpose 2 in1, 3 pin 5 and 15 Amps, AC 240 volts complete all as specified and directed. |
| 104 | Supply and fixing in repair socket outlet flush type multipurpose 2 in1, 3 pin 5 and 15 Amps, AC 240 volts complete all as specified and directed. |
| 105 | Supply and fixing bell push single pole, 6 Amps, AC 240 Volts, flush type complete all as specified and directed. |
| 106 | Supply and fixing in repair bell push single pole, 6 Amps, AC 240 Volts, flush type complete all as specified and directed. |
| 107 | Supply and fixing celing rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 108 | Supply and fixing in repair celing rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 109 | Supply and fixing electronic Fan regulator 450 watt 2 module, with 5 step type regulator complete all as specified and directed. |
| 110 | Supply and fixing in repair for electronic Fan regulator 450 watt 2 module, with 5 step type regulator complete all as specified and directed. |
| 111 | Supply and fixing ding dong Bell, AC 240 Volts,single pole complete all as specified and directed. |
| 112 | Supply and fixing Bell multi music typeAC 240 Volts, single pole complete all as specified and directed. |
| 113 | Refixing paino switch of any capacity 5 /15 amps obtained from item no 79.00 complete all as specified and directed. |
| 114 | Refixing socket 5 amps or 15 amps capcaity obtained from item no 79.00 complete all as specified and directed. |
| 115 | Supply and fixing white finished single mounting one modular inner plate & outer top cover plate suitable for housing modular accessories with one module metal flush box complete all as specified and directed. |
| 116 | All as per item no 115.00 above but suitablefor 2 modules |
| 117 | All as per item no 115.00 above but suitablefor 3 modules |
| 118 | All as per item no 115.00 above but suitablefor 4 modules |
| 119 | All as per item no 115.00 above but suitablefor 6 modules |
| 120 | All as per item no 115.00 above but suitablefor 8 modules |
| 121 | Supply and fixing modular Switch10 Amps single pole, one waycomplete all as specified and directed. |
| 122 | Supply and fixing Modular Socket outlet, multi purpose, 5 Pin 10 Amps flush typecomplete all as specified and directed. |
| 123 | Supply and fixing ModularBell push flush type,10 Amps fixedcomplete all as specified and directed. |
| 124 | Supply and fixing Modular Socket outlet, multi purpose, 6 pin 16 Amps universal socketcomplete all as specified and directed. |
| 125 | Supply and fixingModularSwitch 16 Amps single pole, one waycomplete all as specified and directed. |
| 126 | Supply and fixing modular fan regulator 150 Watt of four step type complete all as specified and directed. |
| 127 | Supply and fixing Modular Socket outlet 3 pin 25 Amps two module AC 230 volts complete all as specified and directed. |
| 128 | Supply and fixingModularstarter Switch 25 Amps two module AC 230 volts complete all as specified and directed. |
| 129 | Supply and fixing in repair PVC rectangular block for mountingswitches, sockets ,fan regulatoretc with 3 mm thick plastic laminated sheet cover of size 350 x 300 x 50 mm complete all as specified and directed. |
| 130 | All as per item no 129.00 above but of size 250 x 200 x 50 mm. |
| 131 | All as per item no 129.00 above but of size 200 x 150 x 50 mm. |
| 132 | All as per item no 129.00 above but of size 175 x 100 x 50 mm. |
| 133 | All as per item no 129.00 above but of size100 x 100 x 50 mm size. |
| 134 | Supply and fixing in repair pressed steel terminal rectangular sunken boxes made out of 1.6 mm thick mild steel sheet metal with earth dolly for mounting, switches, sockets, fan regulator etc including 3.00 mm thick plastic laminated sheet cover of suitable size for MS box size of 250 x 300 x 50 mm with brass screws and brass washers complete all as specified and directed. |
| 135 | All as per item no 134.00 above but of MS box size of 200mm X 250 mm |
| 136 | All as per item no 134.00 above but of MS box size of 200mm X 150 mm |
| 137 | All as per item no 134.00 above but of MS box size of150mm X 100 mm |
| 138 | All as per item no 134.00 above but of MS box size of 100mm X 100 mm |
| 139 | Supply and fixing in repair plastic laminated bakelite sheet cover of Hylam brand 3.00 mm thick including cutting holes for switches, sockets etc as per requirement including fixing with brass machine screws and washer for size 275 mm X 325 mm complete all as specifed and directed. |
| 140 | All as per item no 139.00 above but of size225 mm X 275 mm |
| 141 | All as per item no 139.00 above but of size 225 mm X 175 mm |
| 142 | All as per item no 139.00 above but of size175 mm X 125 mm |
| 143 | All as per item no 139.00 above but of size125 mm X 125 mm |
| 144 | Supply and fixing double door TPN DBs 4 wayof powder coated DB\"s suitable for MCB\"s fitted with bus bar,Neutral link,Earth bar and Din ral & DB\"s will be fitted concealed in wall / surface as per site required complete all as specified and directed. |
| 145 | Supply and fixingdouble door SPN DBs 12 wayof powder coated DB\"s suitable for MCB\"s fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed. |
| 146 | Supply and fixingdouble door SPN DBs 8 wayof powder coated DB\"s suitable for MCB\"s fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed. |
| 147 | Supply and fixing double door SPN DBs 4wayof powder coated DB\"s suitable for MCB\"s fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed. |
| 148 | Supply and fixing single door SPN DBs 2 wayof powder coated DB\"s suitable for MCB\"s fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed. |
| 149 | Supply and fixing MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 150 | Supply and fixingMCB SPN 40 to 63 amps 10 KA ,C-seriesincluding connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 151 | Supply and fixingMCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity,\"C\" type including connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 152 | Supply and fixing MCB TPN 50 to 63 amps 10 KA ,C-seriesincluding connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 153 | Refixing MCB TPN/SPN/SP any size, capacity obtained from item no 80.00 complete all as specified and directed. |
| 154 | Supply and fixing LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. |
| 155 | supply and fixing LED tube rod 18/20 watt230 volt T8 type complete with electric electronic driver incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. |
| 156 | S & F in replacement Building security LED light luminaire 1X25 W, pressure die cast housing with toghned glass, 240V, efficacy Min 110 Lm/Watt, IP-66, 5 KV external SPD , THD<10%, PF>0.95, CCT-5700K, High power SMD LEDs with LDR sensor working 10 Lm visibility for automatic ON/OFF operation and including cable for connection from celling rose with 1.5 Sqmm 3 CorePVC insulated stranded copper conductor (FRLS) cable including GI bracket medium grade bent to shape etc all as specified and directed. |
| 157 | Supply and fixing LED Batten light Aluminium Housing 18/20 watt230 volt T8 type complete with electric electronic driver incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. |
| 158 | Refixing LED tube light fittings any type, wattage and any size obtained from item no 79.00 complete all as specified and directed. |
| 159 | Supply and fixing LED batten tube light fitting 1x 10 watt 230 voltwall/ ceiling mounted luminaire with polycarbonate hoiusing and integrated electronic driver with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. |
| 160 | Supply and fixing Wall light fixture lantern made of metal with chrome finish with white colour pvc diffuser withB-22 base including connection with all necessary accessoriescomplete all as specified and directed. |
| 161 | Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and directed. |
| 162 | S&F in replacement Lamp holder , PVC / Polycarbonate type with back plate suitable for B22 lamp including LED Bulb 9W complete all as specified anddirected. |
| 163 | Supply and fixing in repair Energy Savings Long Life 15 Watt 230 Volts50 Hz, IP20 rating recessed mounting downlight withaluminium housing and heat sink for better thermal performance and morden and minimalist design with flushed diffuser and as per site requirement ceiling cutout fitting for cool/warm or natural white light options as required including electronic driver of suitable capacity with PF>0.9 complete all as specified and directed. |
| 164 | Supply and fixing in repair Energy Savings Long Life 15 Watt 230 Volts50 Hz, IP20 rating surface mounting downlight withaluminium housing and heat sink for better thermal performance and morden and minimalist design with flushed diffuser and as per site requirement ceiling cutout fitting for cool/warm or natural white light options as required including electronic driver of suitable capacity with PF>0.9 complete all as specified and directed. |
| 165 | Supply and fixing in repair Energy Savings Long Life 12 Watt 230 Volts50 Hz, IP20 rating recessed mounting downlight withaluminium housing and heat sink for better thermal performance and morden and minimalist design with flushed diffuser and as per site requirement ceiling cutout fitting for cool/warm or natural white light options as required including electronic driver of suitable capacity with PF>0.9 complete all as specified and directed. |
| 166 | Supply and fixing in repair Energy Savings Long Life 18 Watt 230 Volts50 Hz, IP20 rating recessed mounting downlight withaluminium housing and heat sink for better thermal performance and morden and minimalist design with flushed diffuser and as per site requirement ceiling cutout fitting for cool/warm or natural white light options as required including electronic driver of suitable capacity with PF>0.9 complete all as specified and directed. |
| 167 | Supply and fixing in replacement LED well glass made of pressure die Cast Aluminum having IK08 impact resistivity and 5KV inbuilt surge protection (Optional 10KV external) IP66 rated 70W, 240Vdelivers luminance efficiency of 120 Lm/W complete all as specified and directed. |
| 168 | Supply and fixing Bed side spot light made up of polycarbonate complete with LED 5 watt light , including driver and connection with all necessary accessories complete all as specified and directed. |
| 169 | S&F recessed mounting fitting 1 x 36/42 watt ultra modern design Natural white/ Warm white architectural LED luminaire 1X4 which provides soft-light and glare free symmetrical illumination suitable for Armstrong / Grid Ceiling including LED driver and 36/42 watt lamp incl all accessories complete all as specified and as directed. |
| 170 | S&F recessed mounting fitting 1 x 36/42 watt ultra modern design Natural white/ Warm white architectural LED luminaire 2X2 which provides soft-light and glare free symmetrical illumination suitable for Armstrong / Grid Ceiling including LED driver and 36/42 watt lamp incl all accessories complete all as specified and as directed. |
| 171 | M&L for Sub main wiring two run single core PVC insulated unsheathed cable FRLSH 1100 volts grade, 6.00 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including one run of 4.00 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor green colour as earth continuity conductor cable connected to earth dolly complete all as specifed and directed. |
| 172 | All as peritem No 171.00 but with two single core 4.0 Sqmm sizewith 2.5 Sqmm cable as earth conductor complete. |
| 173 | All as peritem No 171.00 but with two single core 2.5 Sqmm sizewith 2.5 Sqmm cable as earth conductor complete. |
| 174 | All as peritem No 171.00 but with two single core 1.5 Sqmm sizewith 1.5 Sqmm cable as earth conductor complete. |
| 175 | M&Lfor Rigid non metallic PVC conduitISI marked, medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles. Pipe hooks,couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbedsurfaces in repairs all directed. |
| 176 | M&Lfor Rigid non metallic PVC casing capingISI marked, medium grade,not less than 20 mm base size inclusive of all fitting such as tees,bends. Junction boxes, elbows saddleshooks,couples and lock outs etc fixed on surface mounted complete and making good disturbedsurfaces in repairs all directed. |
| 177 | M&L for rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees, bends, junction boxes, elbows saddles. Pipe hooks, couples and lock out etc 20mm external dia fixed on surface mounted complete and making good disturbed surfaces in repair all as directed |
| 178 | M&L for repair / maintenance of ceiling mounted (4+4) LED Shadowless OT Lights by adjusting and repair the mechanical arms and electrical LED driving equipment incl replacement of defective/spares parts/items ie LED lamp including complete accessories likes LED driver, wire, lugs, nut, bolts, screws etc as per existing on ground including painting of arms withcomplete all as directed to entire satisfaction of Engr-in-charge. Note : (i) The cost of nut, bolt, washer etc is deemed to be included in the quoted rates.(ii) The spare parts/PCB replaced shall be measured seperately under relevent item. |
| 179 | M&L for repair / maintenance of 4 LED Mobile OT Lights by adjusting and repair the mechanical arms and electrical LED driving equipment incl replacement of defective/spares parts/items ie LED lamp including complete accessories likes LED driver, wire, lugs, nut, bolts, screws etc as per existing on ground, complete all as directed to entire satisfaction of Engr-in-charge. Note : (i) The cost of nut, bolt, washer etc is deemed to be included in the quoted rates.(ii) The spare parts/PCB replaced shall be measured seperately under relevent item. |
| 180 | Supply and fixing in replacement of 12 LED Printed Circuit board (PCB) as per existing type, model for Shadowless OT Lights complete all as specified and directed. |
| 181 | Supply and fixing in replacement of Intensity Control digital (touch) or analog (knobs) for precise dimming, often in steps (e.g., 4 stages) or 10%-100% range as per existing type, model for Shadowless OT Lights complete all as specified and directed. |
| 182 | Supply and fixing in replacement of SMPS as per existing type, model for Shadowless OT Lights complete all as specified and directed by Engr-in-Charge. |
| 183 | Supply & fixing Sheet metal earth plug, socket, single pole and neutral with single pole MCB 32 Amps 240 volts fixed in repairs complete. |
| 184 | Supply and fixing ofEarthing to building with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth strip 25x4mm by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point includingexcavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion all as specified and directed. |
| 185 | (Note : The Scope of Work contained in \"Sch of Credit\" amounting to Rs. 1,15,621.00 (refer Sch of credit). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’ |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
