Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc making good distrubed surfaces of walls, floors etc complete all as specified and directed. |
| 2 | Taking down old/ unserviceable distribution board by disconnection of electric connection SPN DBs/TPN DBs including old unserviceable MCCBs/ MCBs etc and making good to disturbed surface complete all as specified and directed. |
| 3 | Taking down carefully copper/aluminium sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 4 | Taking down ceiling fan / exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan bladesand deposit to MES store yard of AGE E/M complete all as specified and as directed. |
| 5 | Material and Labour for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts gradeISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 6 | (a) One light/fan point controlled by one, one way switch 5 Amps |
| 7 | (b) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 8 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 9 | Description all as per item No 5 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 10 | Supply and fix modular switch piano flush type, single pole, one way and 5/6 Amp single module complete all as specified and directed. |
| 11 | Supply and fix modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and directed. |
| 12 | Supply and fix modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified complete all as specified and directed. |
| 13 | Supply and fix modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 14 | Supply and fix ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed. |
| 15 | Supply and fix modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed. |
| 16 | Material and labour for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4.0 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit |
| 17 | Supply and fix sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. |
| 18 | Supply and fix MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and directed. |
| 19 | Supply and fix MCB single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and directed. |
| 20 | Supply and fix MCB single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and directed. |
| 21 | Supply and fix single pole and neutral enclosure with two pin and earth plug socket complete with one MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and directed. |
| 22 | Supply and fixing LED lights fitting 1x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed. |
| 23 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 24 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweepmin air delivery 210 CFM with service value 6.0 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 25 | Supply and fix energy efficient exhaust fan of 230 mm sweep made of metal body type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection complete all as specified and directed. |
| 26 | Taking down existing old unserviceable LT UG/service cable of any type or size complete all as specified and directed. |
| 27 | Supply and laying cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volt grade with stranded aluminium conductor of following sizes complete all as specified and directed. |
| 28 | (a) 3.5 core x 50 Sqmm |
| 29 | (b) 4 core x 16 sqmm |
| 30 | Excavation in trenches n .exc 1.5 mtr wide and not exec 1.5 mtr in depth for foundation etc or for laying pipe lines and cables and getting out as in looses/soft soil complete all as specified. |
| 31 | Returning filling in including spreading leveling, watering and well ramming in layer not exe. 25 cm in soft/ loose soil, complete all as specified and directed. |
| 32 | Removing excavated material to a distance not exc 50m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified. |
| 33 | Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete as directed at site. |
| 34 | Supply and laying for brick of common burnt clay, sub class \"B\" old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cales abutting each other complete all as specified and directed. |
| 35 | Material and labour for earthing complete with galvanized earth plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised earth strip size 25x4 mm by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 5 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC (1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-1 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe and connected to earthing point complete all as specified and as directed. |
| 36 | Supply, installation, commisioning & testing LT feeder pillar box outdoor type double door and single shutter front open including locking arrangement system made out of MS sheet of 3.15 mm CRCA sheet of size 0.6x0.6x0.3 mtr and double door, canopy, dust proof, bottom cable entry plate and gland for cable size 150 to 16 sqmm 3.5 core suitable MS angle iron 40x40x5 mm with aluminium busbar size 600 Amps system mounted on hygroscopic insulators bus bar including suitable nut, bolt and washer (16 Nos) & including powder coated paint with and providing necessary foundation/ plateform of the feeder pillar height 1.5 feet from ground with PCC 1:2:4 type B2 including provision for incomong and outgoing cable gland, thimbling for old / new cables as per site requirement and proper finshing as per existing surface complete all as specified and directed. |
| 37 | Galvanised iron steel tubes, ISI marked light grade of size 40mm bore for cable protection along the poles under road under drains complete all as specified. |
| 38 | Dismantaling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 39 | Material and labour for joint free, Non-skid coloured ceramic tiles, 7 to 8 mm thick (square/rectangle) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match set, over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 40 | Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the light shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 41 | Ditto as per item No. 35 above but in vertical surface as in skirtings, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:3 complete all as specified and as directed. |
| 42 | Material and labour for digital coloured glazed ceramic tiles in vertical surface 350 x 250 x 7mm/ 450 x 300 x 7 to 8 mm thick, etc set and jointed in neat cement slury and pointed in cloured cement to match the shade of tiels including 10mm thick backing coat in 1:4 ceemnt mortar complete all as specified and as directed. |
| 43 | Material and labour for coloured glossy finish heavy duty endura flooring tiles of size 30cm x 30cm x 10mm set with grey ceemnt and no pigment, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 44 | Material and labour for vitrified Ceramic tile light shade/double charged/ultra charged 10 mm thick (square/ rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match set, over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 45 | Ditto all as per item No 39.00 above but in vertical surface as in skirtings, set and jointed in neat cemenmt slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:4 complete all as specified and as directed. |
| 46 | Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed |
| 47 | Material and labour for Granite (Z Black) 18 to 20mm thick table rubbed & polished in steps, jambs, cills, shelves, Chowkats etc including cutting of holes for fixing WHB in cement mortar 1:4 & pointing with white cement with marble dust using admixture of pigment to match with the shade of granite over and including 15mm thick screed in CM 1:4 complete all as specified and as directed. |
| 48 | Taking down aluminium door and window with frame and shutters complete all as directed. |
| 49 | Supply and fix factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory window & other frames/Chowkat (for cupboard) of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (faces) & 1100 N (Edge), minimumcompressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/ SS dash fasteners of requireddia and length complete as per direction of Enginer-in-Charge including M.S hold fast/lugs or SS dash fasteners including all fittings.Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimension on plus die shall be acceptable but no extra payment on this account shall be made. |
| 50 | Supply and fix Factory made single extruded WPC (Wood Polymer composite) solid plain shutter of 35mm size for door comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (faces) & 9000 N (Edge), minimumcompressive strength of 50 N/mm2, modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of beign termite/borer proof, water/ moisture proof and fire retardantand fixing with stainles steel both side openable butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws for fixing including all fittings such as handle, tower bolt hasp staple, both side operated hingesetc complete all as per direction. |
| 51 | Supply and fixing factory made UPVC white colour Casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 5.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mildsteel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc.Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality including all fittings such as hinges, aldrop, handle etc complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 52 | Supply and fixing factory made uPVC white colour.Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimensionof uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.Note: For uPVC frame and sash extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 53 | Dismantaling of Wall, display board/ceiling board fibre,pulp, insulation, etc orinsulation boards/slabs/ wool of any thickness including cover fillets |
| 54 | Supplyand fix size of grid 605 x 605 mm anodised alumunium snap grid frame work for false ceiling all as specified and directed with hangers 6mm dia GI (up to 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleat of GI flat 40 x 3 mm and 60 mm long and expension holed fasteners 12.5 mm dia 40 mm long complete all as specified and directed |
| 55 | Material and labour for 6mm thick non asbestos fibre cement building board fixed in cement ceilingflat or sloping to GI/aluminium frame work complete all as specified and directed. |
| 56 | Supply and fix for 18/19mm thick Prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinet, wall hung type complete all as specified and directed. |
| 57 | Supply and fix for 12mm thick Prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinet, wall hung type complete all as specified and directed. |
| 58 | Taking down PVC Chowkats or frames with shutters not exc 1.5 sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 59 | Taking downChowkats or frames with shutters any type not exc 1.5 sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 60 | Taking downChowkats or frames with shutters any type exc 1.5 sqmand not exc 4.0 sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 61 | Supply and fix solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specification and drawing. |
| 62 | Supply and fix Factory Made Solid PVC Moulded Door Shutter, with free EPS 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing |
| 63 | Supply and fix 4.8mm thick Sheet glass selected quality andglazing in squares not exc 0.50 sqm in each pane of alumunium door/ window complete all as specified . Make of glass : Modi guard, Asahi float glass or Hindustan Piklington. |
| 64 | Supply and fix 4.8mm thick extra over sheet glass selected qualityand glazing in squares not exc 0.50 sqm in each pane as in ground or obsured or frosted on one side fixed inalumunium door/ window/partition complete all as specified . Make of glass : Modi, Asahi float glass or Hindustan Piklington. |
| 65 | Note for item No. 61 to 64:-The work for periodical services shall include the following and the rate quoted by the bidders shall include the same:(i) All painting works shall be got executed through original materials manufacturingcompany or their authorised aplicators as approved by GE and contractor should submitt MoU with the manufacturing company or their authorised applicators before execution of work and entire work shall be executed with the approval firm.(ii) The contractor shall upload with the documents under cover I \"Memorandum of Understanding (MoU) with at least one of the manufacturingmentioned in the contract, falling which the bid shall be liable to be rejected.\"(iii) Contractor shall give guarantee from OEM of 05 years for effectiveness of painting carried out by them formt he certifieddate of completion of work.(iv) Use of scaffolding, trestles, ladders, craddles etc necessary for execution of work and protective measures.(v) Removing of nails, making good holes, cracks etc.(vi) Work in patches and in narrow / widths, bands, cornices, plasters etc and cutting in edge of line where necessary .(vii) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.(viii) Washing floors, cleaning glass, joinery, electric fittings, wiring etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge.(ix) Sample patch of 10 sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. |
| 66 | Material and labour for complete removal and perparation of old decorated treatment on walls (external/ internal) finishes by scrapping with trucare wall sander L-01/H-01 (having mechancial vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vacuum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete andalgae and fungus on the wall to be removed by using high pressurewash or coir brush and shall be treated with fungicidal solution, all surface cracks upto 5mm width should be filled up with Dr. Fixit Crack-X-paste. Cracks more than 5 mm and all separation gaps should be filled up with Dr Fixit Pidicrete URP modified mortar or as specified complete all as specified and directed. |
| 67 | Material and labour for waterproof cement based putty @ 1 kg (undiluted) per sqm of average thickness 2mm over the plastered/ old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechancial wall sander (having mechancial vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:-Step 1 : Mix the putty powder by adding water as per manufactureres instructions and mix it with putty mixer with the mixing capcacity of min 2.5 kg putty per minute.Step 2: Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.Step 3 : Allow 6-8 hours time to dry the putty surface. |
| 68 | Material and labour for one coat of acrylic water based/water proof interior/exterior grade primer in new/old plater surface @ 0.8 ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio or as manufacturer instruction to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per mimute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed. |
| 69 | Material and labour two coats of anti fungal weather proof grade exterior acrylic emulsion paint of approved tint with crack filling upto 5 bars of positive hydrostatic presssure on verticle walls without any dilution with forced coverage not more than 3.5 sqm/ltr as per manufacturer\"s instructjions and all coats to be applied with fully automatic ariless spray machine of paint application with fa lfow spped of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed.Make : Apx Ultima protek Asian paints/ Nerolac excel top guards/ Berger weather coat long life 10. |
| 70 | Dismantaling wrought iron or mild steel work of any description not otherwise provided for |
| 71 | Material and labour for rolled mild steel angles conforming to Fe 410-w (Gde-E-250) quality A, as in frame work work for door frame including flat iron hold fasts, all cutting, welding, finishing etc., complete all as specified and directed |
| 72 | Supply and fix framed work such as grills, gratings, etc.. with ends of barsshouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165. |
| 73 | Preparation of new painted steel surface of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide and sinc chrome complete all as specified and directed. |
| 74 | Supply and fix 300mm mild steel helical door spirng rat tail type including collar plate and welding if required or otherwise fixed with screw on wooden frames complete all as specified and directed. |
| 75 | Supply and fix in repairs door closer hydraulically regulated designation No.2 universal type, aluminium (Die cast body) suitable for door shutters of 701 to 805 mm width and of wt 36 to 60 kg Aluminium (Die cast) |
| 76 | Supply and fix in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and specified and directed. |
| 77 | Supply and fix in repairs powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fastenersof required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws allcomplete as per architectural drawings and the directions of Engineer-in-Charge, etc, complete all as specified. |
| 78 | Supply and fix Anodised aluminium powder coated grill (dyed to require shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @200 mm centre to centre, including cutting the grill to proper opening size of fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and directed. |
| 79 | Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvesincluding sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 80 | Material and labour for reinforcement cement concrete 1:2:4 (20mm grade aggregrate) Type B1 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, complete all as specified and directed. |
| 81 | Supply and fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 82 | Supply and fix mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 83 | Supply an fix Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 150 mm. |
| 84 | Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 85 | Supply and fix in repair Harrison rails, 20mm dia powder coated approved patttern & design including side cups & powder coated mild steel iron brackets stops, rollers etc fixed with steel screws & PVC rawl plugs complete all as specified and directed. |
| 86 | Material andlabour for Fly ash brick 75kg/cmsq compressive strength, Modular size is straight or curved on plan exc 6 meter mean radius built in cement mortar 1:6 complete all as specified. |
| 87 | Supply and fix in repair Vitreous china wash down water closet pan (pedestral pattern) white including seat & cover, flush pipe, connection to drain (of outgoing pipe) and to flushing pipe, anti-syphonage pipe etc, etc, complete all as specified and directed |
| 88 | Supply and fix in repair Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern) including connection to trap, flushing pipe to squatting pan, anti-syphonage pipe etc, and making good to floor complete all as specified and directed. |
| 89 | Supply and fix PVC (SWR) 110 mm dia S trap including connecting to out let with solvent cement complete all as specified and directed. |
| 90 | Material and labour in repairs for PVC (SWR) nahani trap, plain with grating suitable for 75mm dia outlet pipe including jointing to waste pipe fixed in cementconcrete type B-1 (1:2:4) with solvent cement complete all as specified and directed |
| 91 | Supply and fix in repair 10 ltr capacity PVC valveless syphoic action type flushing cistern, low level, white, with inlet, ball valve, float and handle inclduing brackets and flush pipe complete all as specifed and directed. |
| 92 | Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 450mm fixed to pipes and valves complete all as specified and directed. |
| 93 | Supply and fix in repairs vitreous china wash hand basin white flat back size 550 mm x 400 mm excluding tpas waste china and plug and percelain stoper including two coats of synthetic enamel paint over coat of red oxide primer on exposed surface of breckets waste coupling brass CP-32 mm bore with long screwed shanks bedded in red lead cement and other end fixed and pillar taps 15mm bore cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks screwed and removing debris out of MoD land all as specified and directed. |
| 94 | Supply and fix in repairs vitreous china bowl urinal flat back size of 465 x 355 x 265 mm white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including and providing and fixing plugs, bedding against wall in CM (1:2) securing urinal to plus with and including 60 mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge. |
| 95 | Taking down GI tubing 15mm bore all as specified and directed. |
| 96 | Supply and fix GI tubing 15mm bore medium grade with all fittings fixed to wall and ceiling complete all as specified and directed. |
| 97 | Taking down GI tubing 20mm bore all as specified and directed. |
| 98 | Supply and fix 20 mm dia bore GI tubing medium grade, galvanised with all fittings fixed to wall and ceiling or laid in floors complete all as specified and directed. |
| 99 | Supply and fix in repairs 15 mm bore bib taps cast copper alloy with chromium plated crutch or butterfly handle screwed, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 100 | Supply and fix in repair 15mm bore stop valves fancy type, chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed. |
| 101 | Supply and fixin repair 15mm bore dia, stop valves fancy type chromium plated with long shank and cup (concealed type), cast copper alloy, fency type screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipes of union all as specified. |
| 102 | Supply and fix bore brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 103 | Supply and fix 15mm bore high quality brass with a chromium plated wall mounted extended elbow operated lever pillar tap screwed down for iron pipe and fixed complete all as specified and directed. |
| 104 | Supply and fix brass chromium plated overhead shower 125mm dia round shape with swivel joints complete all as specified and directed. |
| 105 | Suppy and fix in repair shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weight 40gms) complete all as specified and directed. |
| 106 | Supply and fix in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercialplywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 107 | Supply and fix Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed on the wall using wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 108 | Supply and fix soap dish, stainless steel, approximate size 160 x 160 x 90 mm fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 109 | Supply and fix straight glass shelft assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket gurad and railing 60 cm long as specified and directed. |
| 110 | Supply and fix in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 12.5 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respects as specified. |
| 111 | Supply and fix in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; includingbedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.B133 |
| 112 | Supply and fixin repair 15mm dia pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered\"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete including takind down old rusted tap complete all as specified and directed. |
| 113 | Supply and fix in repairs toilet paper holder of brass, chromium plated or stainless steel with flat recessed type stainless steel complete all as specified and directed. |
| 114 | Supply and fix in reapirs collapsible waste pipe of size 31/32 x 800 mm, fixed to waste fittings, complete all as specified and directed. |
| 115 | Supply and fix 40 mm uplasticised PVC pipes of pressure rating 10 kg/cm2 fixed complete to walls, ceiling or in floors including all fittings like bend, T, elbow etc complete all as specified and as directed. |
| 116 | Demolition of plain cement concrete as in ground floor and paving not exc 15 cm thickness below or above ground level (unreinforced concrete ) including disposing of debris off the pressure complete all as directed. |
| 117 | Material and labour for 75 cm thick; PCC 1:3:6 type C2 using 40mm graded stone aggregrate, as in plinth protection, complete all as specified and directed. |
| 118 | Material and labour for PCC 1:4:8 type D1 (using 40mm graded stone aggregate) as in sub base 75mm thick, finished fair & even complete all as directed. |
| 119 | Forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade A |
| 120 | Supply and fix 100mm dia grating doom of stainless steel (Minimum weight 25gms) all as specified and directed. |
| 121 | Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed. |
| 122 | Material and labour for rendering 10 mm thick on fair faces of brick or stone surface of walls in cement mortar 1:6 finished even and smooth without using extra cement with and including sagol finsih complete all as specified and directed. |
| 123 | Material and labour for (10+5) mm thick for rendering fair faces of brick work or concrete surface in two coats 10mm thick in CM (1:6) as under coat 5mm thick CM (1:4) as finishing coat in two separate layer mixed with Liquid water proofing compound finsihed even and smooth without using extra cement at any height including necessary scaffolding, ladder, formwork, etc complete all as specified and as directed.Note : Water proofing compound shall be measured and paid separately. |
| 124 | Providing and applying wallcare putty of 3 mm thickness over old/new plastered surface to prepare the surface even and smooth |
| 125 | Material and labour for perparing newly plastered surface of walls and applying two coats of interior oil emulsion paint over a coat of chalk white primer complete all as specified and directed. |
| 126 | Material and labour for perparing newly plastered surface of wall and applying two coat of weather shield/weather proof acrylic exterior emulsion paint (Apex Ultima Luxury emulsion of Asian or equivalent of approved make as approved by GE) by skilled labour and applying one coat of acrylic water based exterior grade primer @ 0.8 ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio or as per manufacturer instruction to be applied with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI or using smart periodical methodology complete all as specified and directed.Note : - Shade and pattern of the colour will be approved by GE. |
| 127 | Materiall and labour for preparing of old decorative surfaces of walls and applying one coat of white wash on walls including cornices etc complete including filling cracks with wall care putty wherever necessary complete all as specified and directed. |
| 128 | Material and labour of old decorative surface of ceiling and applying one coat of white wash on ceiling including cornices etc complete including filling cracks with wall care putty wherever necessary complete all as specified and directed. |
| 129 | Material and labour of old decorative distempered internalsurface of walls and applying one coat of interior emulsion paint complete including filling cracks with wall care putty wherever necessary complete all as specified and directed. |
| 130 | Material and labour for cleaning of roof surfaces and applying a coat of oil base bituminous primer @ 0.30 ltr per sqm over and including 15mm thick cement plaster in CM 1:4 mix with liquid wate proofing admixture @200ml per bag of cement including laying of APP based polymeric membrane weighing not less than 3.00 kg/ sqm and minimum 3 mm thick reinforced with polysternon woven fabric (wt, not less than 150 gms/ sq.m) laid on primed surface by tension application with 100mm over lap travers and 150mm over lap longitunal and finishing the top surface by applying two coat of aluminium paint @ 0.1kg/sqm on each coat including taking down old treatment complete all as specified and directed. |
| 131 | Material and labour for providing cement concrete 30mm thick PCC 1:2:4 type B-0 (12.5mm graded agg) as in padding on roofs slab to receive water proofing treatment, laid to require slope, finsihed even and smooth without using extra cement complete all as specified and directed. |
| 132 | Supply only liquid wate proofing chemical |
| 133 | Disconnecting existing tank of capacity exc 250 ltr n. exc 500 ltr of any description, setting aside for cleaning and repair of WPT work and refixing and reconnecting to its original position after completion of water treatment complete all as specified and directed. |
| 134 | Dismantaling water tanks of capacity exc 250 ltrs but n.exc 500 ltrs complete |
| 135 | Dismantaling wate tanks of capacity exc 500 ltrs but n. exc 1000 ltrs complete |
| 136 | Supply and fix rotational moulded polythene water storage tanks (cylindrical vertical with closed top), of capacity 500 ltrs hoisted and fixed in position all as specified in SSR Part I |
| 137 | Supply and fix rotational moulded polythene water storage tanks (cylindrical vertical with closed top), of capacity 1000 ltrs hoisted and fixed in position all as specified in SSR Part I |
| 138 | Supply and fix in repairs 20mm bore dia of pipe ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210 gms/25mm-455gms/40mm-690 gms) |
| 139 | Supply and fix in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 140 | Material and labour for repairing of R.C.C projections, chajjas, roofs, facia, columns, beams etc, in patches not exceeding 3 sqm in each patch by necessary prepration, scrapping, cutting, chiseling dustingand cleaning exposed reinforcement, surfaces of damaged, loose R.C.C surfaces and applying one coat of cement slurry and filling the surface with cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate and reinforced with welded mesh (if reqd) with or without facia and finished with 15 mm thick cement and sand mortar (1:4) using coarse sand and thickness of R.C.C member n. exc 75mm including necessary form work at any height including dismantaling of damaged concrete complete all as specifed and directed.(Note : Welded mesh will be measured and paid separetely) |
| 141 | Supply and fix 2mm thick anti static, anti-slip, moisture-proof, weather-resistant, Fire-proof, Waterproof, sound-proof, Heat insulating Vinyl floor suitable for Operation theaters. The surface of floor should have Matte finish, 200+ pastel shades, classic non-directional patterns. The minimum weight of materials should not less than 3150 to 3950 gm/sqm upto tensile strength 1450 ibs/sq inch including fixed with floor with adhesive or otherwise with copper strip. The size of roll should be 200mm wide and 2 mtr long. Installation process should be carried out as per manufacturer instruction including seamless joints and flush coving is crucial for both hygiene and ESD protection, complete all asspecified and directed. Make : GERFLOOR, WONDERFLOOR, Jeoflor and Tarkett or IS equivalent |
| 142 | Supply and fix one piece Surgical Scrub stainless steel 304 material sink in 20ga 304 tank with 38 mm dia waste outlet. The side and front covering in 22ga 304 with openable doors. The unit is fitted with 2 nos sensor controlled unit and manual operated foot padels for instrument Wash. The size is 1150 x 600 x 1250 mm including all fittings complete all as specified and directed. |
| 143 | Supply and fix one piece Surgical Scrub stainless steel 304 material sink in 20ga 304 tank with 38 mm dia waste outlet. The side and front covering in 22ga 304 with openable doors. The unit is fitted with 2 nos sensor controlled unit and manual operated foot padels for instrument Wash. The size is 900 x 550 x 1350 mm including all fittings complete all as specified and directed. |
| 144 | Supply and fix stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilevers cast iron brackets, connecting union etc, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm including cantilevers angle iron brackets of 2nos of size 25 x 25 x 3 mm complete all as specified and directed. |
| 145 | Material and labour for freestanding bath tub of min size 1800mm x 1200mm x 600mm, rectangular in shape with deep soaker, overflow, popup and drain pipe. The tub should be made of high quality acrylic/ceramic materials, white in colour including all fittings complete all as specified and directed. |
| 146 | Note : The amount against Schedule of Credit on Page No. 45 shall be deducted from the total amountquoted against Sch \"A\"while deriving lum Sum for Acceptance. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
