|
| 1 | Brick work with commom burnt clay machine moulded perforated F.P.S. (non modular) bricks of class designation 12.5 conforming IS 2222 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand. (as per DSR Code No-6.30.2) |
| 2 | 12 mm thick cement plaster (in Fine Sand) of mix: 1:6 (1 cement: 6 fine sand). (As per DSR Code No-13.1.2) |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. (as per DSR Code no-15.56) |
| 4 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge With cement mortar 1:4 (1cement: 4 coarse sand) AS per DSR No 14.1.2 |
| 5 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR No 13.91 |
| 6 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per DSR 13.80 |
| 7 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 Itr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm DSR No. 13.48.1 |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work As per DSR No 13.99.1 |
| 9 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides DSR No 10.29.2 |
| 10 | Providing and placing on terrace at all floor Levels polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR No. 18.48 |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15mm dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/e fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, Including cutting chases and making good the walls DSR No 18.8.1 |
| 12 | Providing and fixing on wall face unplasticoised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter DSR No 18.49.1 DSR-23 12:41.2 |
| 13 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to 15 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (1) Single socketed pipes 75 mm diameter DSR No 18.49.1 DSR-23 12.41.1 Please Enable Macros to View BoQ information |
