Tender For Petty Miscellaneous Repairing Works At Centenary Hospital, Hospital Park Quarters, Including Plumbing And Sanitary Works For A Period Of One Year From The Date Of Placement Of Work Order., Kolkata-West Bengal

TDR : 53152743

Tender Notice
BOQ

23 Days Left

Kolkata , West Bengal

Tender Brief : Tender For Petty Miscellaneous Repairing Works At Centenary Hospital, Hospital Park Quarters, Including Plumbing And Sanitary Works For A Period Of One Year From The Date Of Placement Of Work Order.

Document Fees
₹ 1770 /-

EMD
₹ 61374.0 /-

Tender Value
₹ 30.68 Lakhs /-

Submission Date
20-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in excavation of the foundation tranches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing spreading or stacking the spoils within a lead of 75Mtr as directed. The Item including necessary trimming the sides of tranches, levelling, dressing and ramming the bottom, bailing out water etc. as required complete. Depth of excavation not exceeding 1500 mm.
2	Earth work in filling in foundation trenches or plinth with good earth obtained from excavation of foundation in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. (Payment to be Made on the basis of the Measurement of finish quality of work).
3	Dismantle all types of Masonry excepting cement concrete plain or reinforced, stacking serviceable Materials at site &removing the rubbish as directed within a lead of 75 Mtr in ground floor including roof.
4	For 1st floor
5	For 2nd floor
6	Dismantle all types of plain cement concrete works up to 150 mm thick stacking serviceable Materials at site andremoving rubbish as directed within a lead of 75 Metre in ground floor including roof.
7	For 1st floor
8	For 2nd floor
9	Dismantle R.C. floor, roof beams etc. including cutting rods and removing of rubbish as directed within a lead of 75 Mtr including stacking of steel bars in ground floor including roof.
10	For 1st floor
11	For 2nd floor
12	For 3rd floor
13	For 4th floor
14	Dismantle artificial stone flooring up to 50 mm thick by carefully chiselling without damaging base and removing rubbish as directed within a lead of 75Mtr. In ground floor including roof.
15	For 1st floor
16	For 2nd floor
17	For 3rd floor
18	Cutting chase upto 125 x 150 mm. and subsequent mending of damages. in brick wall[Cement-3.6 Kg/Mtr]
19	Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
20	Brick work with 1st class bricks in cement mortar (1:6) In foundation and plinth
21	Brick work with 1st class bricks in cement mortar (1:6) In superstructure, ground floor
22	For 1st Floor
23	For 2nd Floor
24	125 mm. thick bricks work with 1st class brick in cement morter (1:4). In ground floor
25	For 1st floor
26	For 2nd floor
27	For 3rd floor
28	For 4th floor
29	75 mm. thick brick work with 1st class bricks set incement, sand mortar (1:4) in ground floor including H.B. netting in every alternate layers.
30	For 1st floor
31	For 2nd floor
32	For 3rd floor
33	For 4th floor
34	Provide and lay plaster to wall, floor, and ceiling with sand & cement morterincluding rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface by chipping, etc., including throating, nosing and drip course where necessary
35	15 mm. thick plaster. With 1:6 cement mortar
36	Gr.floor
37	For 1st floor
38	For 2nd floor
39	For 3rd floor
40	10 mm thick plaster. With 1:4 cement mortar
41	Gr.floor
42	For 1st floor
43	For 2nd floor
44	For 3rd floor
45	Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.
46	Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement(Add extra @1.5% for each addl. floor upto 4th floor and @1.75% for each additional floor above 4th floor for item No.5 and 6 of subhead A).25 mm thickIn Ground Floor including roof.
47	For 1st Floor
48	For 2nd Floor
49	For 3rd Floor
50	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor including roof as per relevant IS codes. Pakur Variety
51	For 1st floor
52	For 2nd floor
53	For 3rd floor
54	Ordinary Cement concrete (mix 1:1.5:3)with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor including roof as per relevant IS codes.Pakur Variety
55	For 1st floor
56	For 2nd floor
57	For 3rd floor
58	Hire and labour charges for the shuttering with centering and necessary staging up to 4Mtr using approved stout props and 25 mm to 30 mm thick hard wood planked with required bracing for concrete slabs beams, columns, lintels curved or straight including fittings, fixing and striking out after completion of the works (up to roof of ground floor) as per the direction of Engineer – In – Charge.
59	For 1st floor
60	For 2nd floor
61	For 3rd floor
62	25 mm to 30 mm shuttering without staging in foundation
63	Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 mTor steel/Mild steel. JSW/JSPL/SHYAM/ SRMB/BMASL /ELECROSTEEL /SSLGr. floor
64	For 1st floor
65	For 2nd floor
66	For 3rd floor
67	Provide and lay Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
68	Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge.20 mm thick
69	R.C. shelves (1:1.5:3) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8% main and 0.2% distribution bars), shuttering etc. and 10 mm. thick cement plaster (1:4) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages as necessary complete. 50mm Thick panel using Steel of JSW/JSPL/SHYAM/ SRMB/BMASL /ELECROSTEEL /SSL In ground floor
70	For 1st Floor
71	For 2nd Floor
72	For 3rd Floor
73	Repairing crack in wall by cement grouting (1 : 2) including widening the crack on the surface (into V section) cleaning and packing the same with cement mortar (1 : 2) and finishing off to match with adjacent surface. (Cement-69 Kg/100 m)
74	Resetting old glazed porcelain tiles in 20 mm thick cement mortar (1:4) including 4 Nos of key stone (10 mm) fixed with adhesive of approved quality & 2 mm thick cement slurry using cement @ 2.91 kg/Sq.m at the back of tiles and finishing joints with white cement & colouring oxide [if required] tomatch the colour of tiles over application slurry @ 1.75 kg/ Sq.m below cement mortar includingismantling the old mortar etc.
75	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 Per Nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
76	FloorWith Sand Cement Mortar (1:4)20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.Area of each tile above 0.09 Sq.m Coloured decorative
77	Wall With Sand Cement Mortar (1:3)15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.Area of each tile above 0.09 Sq.mColoured decorative
78	Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from the wall after unscrewing bolts, nuts, screws etc. and stacking the Materials at site as directed. (Payment to be Made on measurement of portion of roof wall removed.
79	Easing, oiling and adjusting the steel shutters including scraping all members and fitting so as to make the shutters easily operable (no extra payment will be made for taking out and fixing glass, if necessary).(Each means a pair of shutter in a frame)
80	Renewing steel plated or oxidised casement stay or peg stay of steel window frames including painting two coats with approved paint complete.
81	Renewing one point steel (oxidised) handle of steel door andwindows as directed including painting complete.
82	Repairing steel shutter with new rivets including taking out andrefixing, adjusting, welding, cleaning cutting holes, mending gooddamage to match with the existing one.
83	Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately)Upto area 2.5 Sq.m
84	Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) , reassembling and refitting and rehanging same with old fittings but with new screws as necessary.
85	Styles and rails of wooden shutters fitted and fixed complete. (Payment to be made on area of new work only). For 25mm. Thick shutterSishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.In Ground Floor:
86	For 1st floor
87	For 2nd floor
88	For 3rd floor
89	Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).Sal : Local. In Ground Floor.
90	For 1st Floor
91	For 2nd Floor
92	For 3rd Floor
93	Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. (In case of non-supply of single plank, penal rate of reduction of 20% will be made)35mm thick shutters with 19mm thick panel of size 30 to 45 cm.Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.In ground floor.
94	For 1st Floor
95	For 2nd Floor
96	For 3rd Floor
97	Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings Shutter with 19mm thick planks, 19mm thick battens. Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak
98	For 1st floor
99	For 2nd floor
100	For 3rd floor
101	Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings35 mm thick shutters (single leaf)In Ground Floor.
102	For 1st floor
103	For 2nd floor
104	For 3rd floor
105	Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals)Sal : Local.
106	Easing doors and windows.
107	Provide iron butt hinges of approved quality fitted and fixed with steel screws, with I.S.I. Mark.75 mm. x 40 mm. x 1.12 mm.
108	100 mm. x 50 mm. x 1.25 mm.
109	Provide iron socket bolt of approved quality fitted and fixed complete.100 mm. long x 10mm. dia. bolt.
110	150 mm. long x 10mm. dia. bolt.
111	225 mm. long x 10mm. dia. bolt.
112	Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 250mm long.
113	Provide iron door ringof approved quality fitted and fixed with nuts and washer complete.50 mm dia.
114	Supplying anodised aluminium catch hook with eye fitted and fixed to shutter and chowkat complete of best quality: 150mm long.
115	Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: With continuous plate base (Hexagonal / Round rod) 125 mm grip x 10 mm dia rod.
116	Supplying \"Godrej\" mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete.
117	Provide Godrej Hydraulic door closer fitted and fixed complete. Medium type
118	ProvideAnodised aluminium floor door stopper
119	Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)3 mm thick (weighing 7.4 kg/Sq.m)
120	Supplying, fitting and fixing in position fibre glass panes of approved quality with resin, nail, clip etc. as per IS:12866-1989. (In all floors for internal wall & upto 6 m height for external wall)3 mm thick (5.10 Kg/Sq.m)
121	Renewing worn out putty of glass panes Panes not exceeding 0.2 Sq.m
122	Panes exceeding 0.2 Sq.m but not exceeding 0.5 Sq.m
123	Ceiling of soft-insulation boards (12mm thick) as per design fitted and fixed complete (excluding the support framework but including necessary wood battens of size 40 mmx25 mm).Sal : LocalIn ground floor.
124	For 1st floor
125	Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge.
126	Supplying & fixing 125 mm. Dia acrylic handle for aluminium door as per approved make & brand.Natural Colour
127	M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in-charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.
128	Renewing IRC fabric mesh of 75mm x 50mmx 4.5mm x 2.7mm on 50mm x 50mm x 6mm old angle iron frames all round and one 37.5mm x 6mm M.S. flat bar over the netting all round welded to angle iron frame and providing locking arrangements if necessary and with two coats of synthetic enamel paint(Other than Hi-gloss) fitted and fixed with clamps or haskal doomney etc. complete including flat stiffeners on every 1.0 m apart both ways. Cost of Concrete for fixing will be paid separately)
129	Provide M.S. or W.I. ornamental grill of approved design, joints continuously welded with M.S. W.I. flats and bars for windows railing etc. fitted and fixed with necessary screws and lugs, in ground floor.i) Grill weighing above 10 kg/sq. m. and up to 16 Kg. / Sq. m. The weight of grill per sq. m. will be determined by taking the physical weight of fabricated grill and dividing the same by covered area of the same. No shop priming will be allowed to facilitate inspection of workmanship. Weight of grill is to be taken after final grinding and finishing the weld.
130	Taking out rain water down pipes, removing chokages and refixing the same in position including mending good damages (of taking out and refixing)
131	Taking out rain water down pipe.
132	Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining withjointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:110 mm. Dia.
133	UPVC Fittings:Bend 87.5 degree: 110 mm. Dia.
134	Shoe: 110 mm. Dia.
135	Labour for taking out rolling shutter (only shutter portion)dismantling by parts for repair or (replacement of damaged partsonly), rehanging and refitting the same in position after necessaryrepairs (excluding the cost of supply of new parts).
136	Oiling and greasing of rolling shutter and repair to in side lock.
137	Renewing profile of rolling shutter including fitting fixing completeas per existing size and shape.
138	Renewing seam pipe for rolling shutter as per existing size and shape fitting, fixing complete.
139	Renewing spring of rolling shutter as per existing size and shape including fitting fixing complete.
140	Scraping and removing greasy soot from walls or ceiling of kitchen or similar smoke affected rooms and preparing the surface.
141	Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
142	Acrylic Distemperto interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.Two Coats
143	White washing including cleaning and smoothening surface thoroughly. All floors Two coats (to be done on specific instruction).
144	Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly :Internal surface (All floors)Two coats of colour washOther than yellow, pink.
145	Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification. Two coatsIn Ground Floor.
146	French polishing to wood work including preparing surface (ordinary gloss) On old French polished surface including complete removal of the old polish.
147	Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
148	Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.(This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.)
149	Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On timber or plastered surface : With hi-gloss of approved quality- Two coats (with any shade except white)
150	On steel or other metal surface :With hi-gloss of approved quality- Two coats (with any shade except white)
151	Washing and cleaning with oxalic acid powder using 33 gms./sq.m.Floor/ dado other than marble
152	Uproot and remove plants from the surface of walls parapet etc. and making good damages.Small plant of girth of exposed stem up to 75 mm. lift up to 6 m.
153	Medium size plant of girth of exposed stem above 75 mm. but not exceeding 150 mm. lift upto 6 mtr.
154	Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge
155	Cutting / Cleaning/Removing jungles including uprooting/ Removing of rank vegetation, cutting grass, brush wood, cutting/removing small tree saplings or branches of trees falling under the cutting area at different 50 m outside the periphery of the area cleaned as per direction including all lead , lifts cutting instruments , labour etc complete in all respect.
156	Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.
157	Spot application for insecticides using Aqua base spray for pest (for bugs, cockroaches, silverfish, spider, termites, mosquitoes) to walls and ceiling etc. with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying the emulsified chemical @ 0.5 litres per sq.m. by a hand operated pressure pump on wall surfaces, ceiling, electrical fixture,electrical lines including drilling holes inplaces where source of termite is detected squirting chemical solution into the holes and sealing the holes with cement grout. (Rate is per sq.m. of the floor area while actual work will be all walls ceiling, rack, partition and furniture).
158	Reparing collapsible gate by cutting out all rivets as necessary reassambling all members including welding pieces of channels, sraightening bent bars and rivetting with new rivets and fitting in position and painting two coats.
159	Easing and oiling, cleaning collapsible gate and repairing to locking arrangements.
160	Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Payment will be made on the area of the gate covered by two guard rails and two extreme channels)In ground floor
161	For 1st floor
162	Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge.
163	Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.
164	Taking out M.S. or W.I. Grills from wooden frame including cutting lugs from masonry wall and refitting the same and mending good damages after repairs. (Excluding the cost of necessary repair of damages) or doing any other necessary works.
165	Double acting Iron Spring Hinges of approved quality fitted and fixed complete:- 150mm size
166	Easing tower wrench, barrel, skeleton, socket bolt etc. by scraping and oiling.
167	Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping]In Ground Floor4mm
168	12mm
169	Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer\"s specified rate) for concrete of various grades.
170	Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. One coatIn Ground Floor:
171	For 1st floor
172	For 2nd floor
173	For 3rd floor
174	Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.Normal Acrylic Emulsion (Two Coat)In Ground Floor:
175	For 1st floor
176	For 2nd floor
177	For 3rd floor
178	Protiding and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. Sheet and galvanized with zinc coating of ISO gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide-x-1-.4-111m-thick with flanges of 27-mtn-and-3-7 mm, at 1200 mm centre to centre-cone - flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 nun long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in-3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacture\"s specification and also including the cost of making openings for light fittings, grills , diffusers , cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer-in-Charge but excluding the cost of painting with: (ISI Mark on Board)
179	Supplying ,fitting & fixing Eco-friendly, Moisture Resistant and Incombustable Gypsum plaster board/tiles (Density > 700Kg per Cu.m) conforming to IS 2095- Part 1, 2011 of size 595mm X595mm of approved design and brand placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge.False ceiling with 12.5mm thick Square edged Gypsum Plaster Board / tiles
180	Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.In ground floorArea of each Granite slab 0.6 to 1.0 Square meter.
181	For 1st Floor
182	For 2nd Floor
183	For 3rd Floor
184	Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor. Slab Thickness 20 to 25 mm
185	For 1st Floor
186	For 2nd Floor
187	For 3rd Floor
188	Cleaning and sweeping roof, cornice, drain and box drain etc. in any floor including removing dust, sweeping materials to the ground floor vat of the building.
189	Suppling. fitting and fixing single skin color coated trapezoidal profile for wall cladding, Roof shall be made of 0.45ntm ISMT ( Base Metal Thickness) (0.50mm TCT ( Total coated thickness excluding paint), G550 (min 550 yield strength), of Zincalume metallic coating (1515965) with high Solar Reflectance Index (SRI) value for better calling as per thermatech technology ,I000-10 5mm effective cover width with five major corrugation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg .The steel sheet shall he fastened with 40 micron zinc coated or 25 micron zinc-tin alloy coated hex head, self -drilling screw as per 15 3566-2002 Class 3 fastener. The base steel shall be coated with zinc-aluminium alloy Zincalume ( AZI50 )Re. 55% 43.4% Zinc, 1.6%5i) minimum of 150 g/m2 coating total on both sides. pre-painted with colorbond XRW ( xterior roofing, walling ) paint system of 35 micron Super Durable Polyester paint ( SD P ) with stable inorganic pigment with no lead contents confirming 1515965. The sheet shall be free from defects and have brand marking of the manufacturer giving product details on the back of the sheet at regular interval confirming genuinity of the material.
190	Cutting of branches of trees and shrubs from the road way or with in R.O.W including disposal of wood and leaves to suitable location as per technical specification Clause 1914 for Rural Roads of MORD.
191	Brick work with exsisting bricks taken out from source including cleaning/removing old mortar from the brick face in cement mortar (1:6) in foundation and plinth with old departmental bricks all complete.
192	Brick work with exsisting bricks taken out from source including cleaning/removing old mortar from the brick face in cement mortar (1:6) in super structure with old departmental bricks all complete.
193	Cleaning rubbish, sludge, liquid earth, mud, etc. from kutcha pucea surface drain up to 1.8 M deep including stacking the spoils within a lead of 75.00 mtrs.(Payment will be made on the basis of actual measurements of spoil in dry condition
194	Hire charges ofEarth movers / Excavator -cum -loader for 8 hours. including one no operator , one no. helper ,fuel etc. The rate inclusive of all expenses etc complete but excluding G.S.T.
195	Supplying ,fitting fixing regulatory/symbol/Road Sign/Direction Board sign with Vinyl stiker of approved quality for lettering/figuring direction ,arrow,symboletc.pasted on 4mm thick plastic board having necessary holes at all corners and edges fixing with necessary bolting etc.with the existing steel/other structure as per direction.The rates includes vinyl stickers,plastic board,lettering /figuring etc.Fitting,fixing,hoisting and placing in position on steel frame work with necessary bolting and transport charges complete as per approved drawing etc.and direction of engineer in charge but excluding the cost of required steel frame.
196	Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge.
197	Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosiveprotective coating formulated to inhibit the corrosion of reinforcement as per manufacturer\"s specification] [Mode ofmeasurement:The affected surface area of reinforcement shall beconsidered for payment]
198	Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer\"s specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface).Note: Applicable only when the full diameter of reinforcement steel is exposed.
199	Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T(Reinforced Barbed Tape) Concertina fencing on wall top usingconcertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as \"C\" clips, R.B.T clips etc.) (The rate is exclusive of the cost of posts)
200	Supplying, fitting galvanised 2 ply 12 gauge / 2 points line ofbarbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples,straining bolt and binding wire as necessary 2 ply 12 gauge/ 2 points.(Payment to be made on the length of individual lines of wire.)
201	Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made separately.)-FOR EXPOSED WORK-Medium quality G.I.Pipes. (i) 15 mm.
202	(ii) 20mm.
203	(iii) 25mm.
204	(iv) 40mm.
205	(v) 50mm.
206	(vi)80 mm
207	(vii) 100 mm
208	(viii) 150 mm
209	Supplying, fitting and fixing in position G. I. pipes of TATA make for underground works with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, short piece etc. including cost of all materials, jointing materials, cutting pipes, making threads, cutting trenches up to 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made separately.)(i) 15 mm.dia. medium quality
210	(ii) 20mm.dia. medium quality
211	(iii) 25mm. dia. medium quality
212	(iv) 40mm. dia. medium quality
213	(v) 50mm.dia. medium quality
214	(vi) 80 mm dia. medium quality
215	(vii) 100 mm dia. medium quality
216	(viii) 150 mm dia. medium quality
217	Labour for dismantling G.I. pipe with fittings. (i) 15 mm.
218	(ii) 20 mm.
219	(iii) 25 mm.
220	(iv) 40 mm.
221	(v) 50 mm.
222	(vi) 80 mm.
223	(vii) 100 mm.
224	Refix G.I pipe with fittings after cleaning where necessary .(i) 15 mm.
225	(ii) 20 mm.
226	(iii) 25 mm.
227	(v) 40 mm.
228	(vi) 50 mm.
229	(vii) 80 mm.
230	(ix) 100 mm.
231	Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).(i)15 mm
232	(ii)20 mm
233	(iii) 25mm.
234	(iv) 40mm.
235	(v) 50mm.
236	Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm-15 mm dia.
237	Supplying, fitting and fixing bib cock or stop cock.
238	Supplying, fitting and fixing Chromium plated Bib Cock Short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
239	Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand
240	Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
241	PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)15 mm
242	Supplying, fitting and fixing Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent)-15 mm dia.
243	Supply of galvanised iron socket with I.S.I. mark.(i) 15mm
244	(ii) 20mm.
245	(iii) 25mm.
246	(iv)40mm.
247	(v)50mm.
248	(vi)80 mm
249	(vii)100 mm
250	Supply of galvanised iron plug.(i) 15mm.
251	(ii) 20mm.
252	(iii) 25mm.
253	(iv) 40mm.
254	(v) 50mm.
255	Supply of G.I. plain Tee of approved brand and make.(i) 15 mm
256	(ii) 20 mm
257	(iii) 25 mm
258	(iv) 40 mm
259	(v) 50 mm
260	(vi)80 mm
261	(vii)100 mm
262	(vii)150 mm
263	Supply of G.I. plain equal elbow of approved brand and make.(i) 15mm.
264	(ii) 20mm.
265	(iii) 25mm.
266	(iv) 40mm.
267	(v) 50mm.
268	(vi)80 mm
269	(vii)100 mm
270	Supply of long screw (150 mm long) of TATA make with sockets (TATA make) and jam nut -(i) 15mm.
271	(ii) 20mm.
272	(iii) 25mm.
273	(iv) 40mm.
274	(v) 50mm.
275	Labour for fitting & fixingG.I. specials includingjointing materials –Plug , Socket, Reducing socket, Bend, Plain Equal Elbow, Reducing Elbow, Nipple, Short Piece, Plain Tee, Reducing Tee, Pendent Tee, Jam Nut, Socket & Nipple , Cross, union, Long Screw. (a) Plug.(b) Socket, Reducing socket, Bend, Plain equal elbow, Reducing elbow, Nipple, Short piece.(c) Plain tee, Reducing tee, Pendent tee, Jamnut, Socket and Nipple.(i) Up to 25mm. dia.
276	(ii) Above 25mm. up to 50mm. dia.
277	(iii) Above 50mm. up to 80mm. Dia
278	(iv) Above 80mm. up to 150 mm. Dia
279	Supply, fit & fix approved brand PVC waste pipe with PVC coupling at one end fitted with necessary clamp – 32 mm dia(a) 750 mm long.
280	(b) 600 mm long.
281	Supply, fit & fix waste fittings complete C.P. over brass.(a) 32 mm dia.
282	(b) 44 mm dia.
283	Supplying, fitting and fixing PTMT overhead shower of approved brand and make (Prayag or equivalent) -75 mm round.
284	Supplying, fitting & fixing CI brackets including two coats of painting.(a) Wash basin, Dewtd. Spittoon,
285	(b) Sink, Drain boond.
286	Supplying, fitting & fixing 10 litres PVC low down cistern conforming to IS specification with PVC fittings complete CI brackets including two coats of painting to brackets etc.
287	Renewing high pressure polythene ballcock of approved quality with polythene ball and aluminium lever complete for pipe of dia.:(a) 25mm. dia.
288	(b) 15mm dia.
289	Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint..(ii) 550 mm X 400 mm size(a) White in colour
290	Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets- 530 mm X 430 mm x 180 mm.
291	Supply, fit and fix approved brand PVC connector white flexible with both end coupling with heavy brass over C.P. nut 15 mm dia- 450 mm long.
292	Dismantle Wash Basin with or without waste fittings with brackets.
293	Refix Wash Basin with or without waste fittings with brackets.
294	Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 / 2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line ofthe total pipe line in fitted condition including specials, payment for specials & Painting will however be paid separately) - With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth.(a) 100 mm dia (internal).
295	Supplying, fitting & fixing Cast iron single branch equal with door conforming to I.S. 1729/1970 including joining and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid separately). (a) With valamoid joints including sealing the top with cement mortar (4:1)-100 mm dia.
296	Supplying, fitting & fixing Cast iron double branch equal with door conforming to I.S. 1729/2002 including jointing and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid separately). (a) With valamoid joints including sealing the top with cement mortar (4:1)(ii)100 mm dia.
297	Supply, fit and fix HCI bend with door conforming to ISS including jointing complete and painting two coats to the exposed surfacewith approved paint complete (payment for paint will however be paid separate4ly) with valamoid joints including sealing the top with cement mortar (4:1) (painting to be paid separately.)(a) 100mm. dia. (internal.
298	Supplying, fitting & fixing H.C.I. bend without door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid separately) with valamoid joints including sealing the top with cement mortar (4:1)- 100 mm dia.
299	Supplying, fitting & fixing Cast Iron \"P\" or \"S\"Trap conforming to IS 3989/2009 and 1729/2002 including lead caulked joints and painting two coats to the exposed surface (painting to be paid separately)without AS horn -100 mm dia. “P” Trap.
300	Removing chokage of H.C.I. or S.W. pipe with split bamboo (a)Aboveground.
301	(b) Under ground.
302	Supply, fit & fix shallow water closet Indian pattern (I.P.W.C.) of approved make in white vitreous china ware of approved make supplied fitted and fixed in position (excluding the cost of concrete for fixing) – 450 mm.& 510mm. long.(i) 450mm.
303	(ii) 510mm.
304	Supplying, fitting and fixing E.W.C. in glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc-with \"P\" trap.(a) White in colour with P Trap
305	(b) White in colour with S Trap
306	Supplying, fitting and fixing PTMT Smart Shelf of approved make of size 300 mm.
307	Supplying, fitting and fixing liquid soap container -Fibre glass.
308	Supply, fit & fix best quality Indian make mirror 5.5 mm. Thick with silvering as per ISI specifications supported on fibre glass frame of any colour frames size 550 mm x 400 mm.
309	Supplying, fitting & fixing towel rail with two brackets –CP over brass -25 mm dia and 600 mm long.
310	Supplying, fitting and fixing flat back urinal( half stall urinal) in white vitreous china ware of approved make in position with brass screw on 75 mm x 75 mm x 75 mm wooden blocks complete.(ii) 470 mm X 280 mm X 340 mm
311	Supplying, fitting and fixing foot-rest for W.C. of size 275 mm x 125 mm with porcelain of approved make.
312	Supply, fit & fix closet seat of approved make with lid and C.P. hinges rubber buffer and brass screw EPWC.a) Plastic (hollow type) black.
313	Supply, fit & fix 32 mm dia polythene flush pipe of approved make with necessary fixing materials and clamps complete.i) Polythene Flush Pipe
314	Dismantling Indian WC including taking out base concrete as necessary.
315	Dismantling EP or Anglo India WC
316	Dismantling Urinal.
317	Dismantling flush pipe of water closet.
318	Supplying, fitting and fixing in position reinforced cement polymer concrete manhole /gully pit cover with matching frame.As per I.S-12592(M.D)1 MT load bearing capacity round manhole cover provided with two lifter hook with matching frame of sizeCover: 450 mm X 40 mmFrame: 540 mm X 80 mmopening: 360mmWeight: 34 Kg. (approx)
319	Clean silt of Inspection Pit
320	Supplying, fitting and fixing low-down cistern parts.(a) Internal fittings for cistern complete of approved make.
321	(b) Outlet Assembly.
322	( c )Rubber Kid.
323	Labour for hoisting plastic water storage tank -upto 1500 litre capacity.Upto 1st story from G.L.
324	Labour for lowering plastic water storage tank and stacking in places as directed -upto 1500 litre capacity.From 1st floor to G.L.
325	Labour for punching hole in plastic water storage tank upto 50 mm dia.
326	Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer1500 litre capacity
327	Renewing cast iron inspection door with bolts and nuts complete for fittings of 50 mm dia. to 150 mm dia. H.C.I. pipe.
328	Supplying, fitting and fixing C.I. round grating.(i) 100mm. dia.
329	C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all castiron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 Kg. (hydraulic pressure) per sq. cm. valve opening to anticlockwise3 direction, fitted and fixed complete. (i) 80 mm.
330	(ii) 100 mm.
331	(iii) 150 mm.
332	Supplying fitting and fixing cast iron spun pipe conforming to I.S. 1536/1976 with all necessary specials including cutting tre4nches in any soil or through masonry, concrete etc. if necessary and mending good all damages including jointing pipes with Tyton joints as per manufacturer’s specifications and filling up the trenches all complete but excluding the cost of masonry or concrete work, if required.
333	(ii) 150mm nominal dia
334	Renewing specials only of cast iron spun pipe conforming to I.S.1536/1976 including cutting trenches in any soil or through masonry,concrete etc., if necessary and mending good damages including jointing with Tyton joints as per manufacturer\"s specifications excluding the cost of concrete or masonry work, if required, but including the cost of fillingup trenches (for all dia. specials, payment will be made on the basis of actual weight of the specials).
335	Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips (4:2:1) and cement plaster (6:1) to match and curing complete in all respect.15 mm
336	20 mm
337	25 mm
338	40 mm
339	50 mm
340	100 mm
341	Supplying pig lead at site of workHorti
342	Dismantling upto 100mm sluice valve by partsand cutting out worn out bolts and reassembling the same after regardingvalve, rewashering flanges, asbestos diamond packing including studs, bolts, nuts and necessary repairs.
343	Repairing damaged lead caulked joint by cutting trench through any type of surface including taking out lead from the joint, recasting and hammering the same with additional lead and lead wool, refilling the trench and mending good damages of thesurface complete in all respect including cost of lead wool.(i) 100mm dia.
344	(ii) 150mm dia.
345	Rewashing stop cock/ bib cock/ push cock/ pillar cock including gland packing if necessary. (i)15mm.
346	Supplying ftting and fixing Drain boards for sinks with brackes in position.(a) Porcelain fluted drain board of approved.(i)530mmx450mm
347	Supplying fitting and fixing check valve (vertical) G.M. tested to 21 Kg. per Sq. cm. (i) 25mm.
348	(ii) 40mm.
349	(iii)50 mm
350	Uprooting and removing plants from the surface of walls parapet etc. and making good damages. Repairing of damages to be paid separately. Small plant of girth exposed stem upto 75mm. lift upto 6 mtr.
351	Medium size plant of girth of exposed upto stem above 75mm. but not exceeding 150mm lift upto 6 Mtr. Bu
352	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.Pakur Variety
353	Supply of UPVC pipes & fittings conforming to IS-13592-1992(A) (i)Single Socketed 3 Meter Length 110 mm
354	(B) Fittings.(i) Plain Tee110mm.
355	(ii) Door Tee110mm.
356	(iii) Bend 450110 mm
357	(iv) Bend 87.50110mm.
358	(v) Vent Cowl.110mm.
359	(vi) Pipe Clip. 110mm.
360	(C ) Rubber Lubricant
361	(D) Solvent Cement
362	Removing chokage of water closet.
363	Removing chokage of urinal and waste trap.
364	Renewing brass spindle and valve of stop cock/bib cock/push cock/pillar cock.15 mm dia
365	Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR value not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application.(i) 150mm internal dia.
366	Dismantling H.C.I. pipe with fittings including melting lead caulked joints.(i) 100 mm
367	Refixing H.C.I. pipe with fittings including lead caulked joints (with the oldmolten lead).(i) 100 mm
368	Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket,reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respectincluding cost of all necessary fittings as required,jointing materials andtwo coats of painting with approved paint in any position above ground.(Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories,specials. Payment for painting will be made seperately)(i) 15 mm
369	(ii) 20 mm
370	(iii) 25 mm
371	(iii) 40 mm
372	(iv) 50 mm
373	Dismantle all types of plain cement concrete works up to 150 mm thick stacking serviceable Materials at site andremoving rubbish as directed within a lead of 75 Metre in ground floor including roof.
374	Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. Above ground. 110 mm Dia
375	Dismantling pillar cock of wash basin.
376	Supplying, fitting and fixing pillar cock of approved make.CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
377	Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). 450 mm X 350 mm
378	Opening out leaky water supply pipe and making the joints water tightUpto 40 mm dia
379	50 mm dia.
380	65 mm to 100 mm dia.
381	Supplying, fitting and fixing White Vitreous China Sink in position on C.I. brackets including two coats of painting of brackets.Plain edge sink with overflow610 mm X 450 mm X 200 mm
382	Renewing special make up piece of pipe having threads on both sides.15 mm
383	20 mm
384	25 mm
385	40 mm
386	50 mm
387	Supplying, fitting and fixing cast iron raised rain proof tank cover 450mm
388	Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
389	CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).
390	Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.With \"P\" trap (with vent)
391	Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007Compact Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings.(As per ASTM D 2467, Schedule 80)(a)(Dia) 15 mm
392	(b)20 mm
393	(c) 25 mm
394	(d)40 mm
395	(e)50 mm
396	Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007Male threaded adopter(a)(Dia) 15 mm
397	(b)20 mm
398	(c) 25 mm
399	(d)40 mm
400	(e)50 mm
401	Supply of daily labour for various non measurable works like segregating and stacking of serviceable materials like paver blocks , stone sets , steel materials etc.[Cost of one Semiskilled labour = Rs.893.00Rate based on office of the Chief Labour Commissioner(C), New Delhi, Circular no.FNO.1/6/(3)/2025 LS-II dated 25.09.2025]Add 11% contractor profit and overhead = Rs. 98.23________________So rate for each Semiskilled labour= Rs. 991.23]for 8.30 Hrs. including 30 min. recess

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

West Bengal Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Petty Miscellaneous Repairing Works At Centenary Hospital, Hospital Park Quarters, Including Plumbing And Sanitary Works For A Period Of One Year From The Date Of Placement Of Work Order., Kolkata-West Bengal

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Petty Miscellaneous Repairing Works At Centenary Hospital, Hospital Park Quarters, Including Plumbing And Sanitary Works For A Period Of One Year From The Date Of Placement Of Work Order., Kolkata-West Bengal

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us