Tender For Renovation/Upgradation Of 01 No 120 Men Jawan Barrack No.2 Of 138 Bn (Now 115 Bn ) Bsf Under Shq Bsf Amritsar (Sh:3 P/F Panel, Service Connection & Accessories), Bhikhiwind-Punjab
TDR : 53143813
Tender Notice
BOQ
10 Days Left
Bhikhiwind
Punjab
Tender For Renovation/Upgradation Of 01 No 120 Men Jawan Barrack No.2 Of 138 Bn (Now 115 Bn ) Bsf Under Shq Bsf Amritsar (Sh:3 P/F Panel, Service Connection & Accessories)
Name of Work:Renovation/Upgradation of 01 No 120 Men Jawan Barrack No.2 of 138 Bn (Now 115 Bn ) BSF under SHQ BSF Amritsar (SH:3 P/F Panel, Service Connection & Accessories)
Sl. No.
Item Description
1
SITC of various sizes water protected outdoor (Water proof)huttype compartmentalized type double door cubical panelboth side opening havingdepth up to 450 mmsuitable for 415 Volt, 3 phases, 50 Hz made out of 2mm thick CRCA sheet with required hardware duly painted with powder coated .Panel having separate detachable gland plate, angle iron base frame made out of 50mmx50mmx5mm angle iron of suitable size of the feeder pillar (minimum height 60cm), hinged door, both side opening with locking arrangement, earth bar/stud, led pilot light for phase indicator (R,Y,B) on top, 200A/415V 4 strip aluminum bus bar duly PVC sleeved, connection inter–connection with 25% extra current carrying capacity busbars to MCCBs spreader links and with solid copper conductor cable 10 sqmm/ solid aluminium rodfor connection toMCBs and heavy duty connectors of required current carrying capacity to be fixed back side including incoming/Outgoing cables connection for three and single phaseMCBs where as required, testing on loadand marking of location for incoming and out going distribution i/c grouting the legs in existing floor with 1:3:6 cement concrete foundation and dsimantling the existing panel, incoming/outgoing cable connections etc complete as required i/c dismentling the existing feeder pillar and UG cable. (Panel should beas per design &drawing approved by Engg in charge).LED light min 5 watt with on/off switch to be provided in the panel.
2
Providing and fixing of 1200 mm sweep BLDC ceiling fan , including wiring the down rods of standard length (upto 30 cm) including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
3
Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required. (3.5x35 sq. mm)
4
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
5
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required
6
Supplying and Laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc direct in ground (75 cm below the ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. as required. i) 63 mm dia (OD-63 mm & ID-51mm nominal)
7
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of alluminume armoured 3.5x70 sqmm in the existing RCC/ HUME/ METAL pipe as required.
8
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of alluminume armoured 3.5x70 sqmm in the open duct as required.
9
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of alluminume armoured 3.5x35 sqmm in the existing RCC/ HUME/ METAL pipe as required.
10
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of alluminume armoured 3.5x35 sqmm in the open duct as required.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
