|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed. |
| 2 | Taking down/chipping of all swolen/loose concrete in chajjas/beams, roughening the surface with wire brushes and applying a coat of cement slurry @ 1.20 kg per Sq.m of surface, and rendering 15mm thick CM in 1:4complete all as specified and directed. |
| 3 | M&L for 15mm thick Polymer modified mortar over concrete surface and making the surface even and smooth complete all as specified and directed. |
| 4 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern complete all as specified and directed. |
| 5 | M&L for plain cement concrete (1:2:4) type 8.1 (using 20mm graded stone aggregate), normal mix in retaining walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks including necessary formwork complete all as specified and directed. |
| 6 | M&L for Micro concrete over rust ram & rust coaton steel surface in columns, beam etc complete all as specified and directed. |
| 7 | M&L for CEMENT PLASTER (IN COARSE SAND) 15 mm thick on rough side of single or half brick wall, block masony or concrete surfaceof mix:1:4 (1 cement: 4 coarse sand) complete all as specified and directed. |
| 8 | M&L for CEMENT PLASTER (IN COARSE SAND) 20 mm thick on rough side of single or half brick wall, block masony or concrete surfaceof mix:1:4 (1 cement: 4 coarse sand) complete all as specified and directed. |
| 9 | M&L for Complete Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches by crack filling material as per manufacturers instructions complete all as specified and directed. |
| 10 | M&L for Finishing walls with Acrylic weather proof exterior paint of required shade New /Old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 11 | M&L for Distempering with 1st quality acrylic distember (Ready made) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade on new/Old work (two or more coats) including primmer and preparation of surfaces complete all as specified and directed. |
| 12 | M&L for Painting with synthetic enamel paintover wooden/ steel surface of approved brand and manufacture of required colour to give an even shade : One or more coats on old work including preparation of surfaces complete all as specified and directed. |
| 13 | Supply only integral Waterproofing compound complete all as specified and directed. |
| 14 | M&L for Removal of Trees/Plants complete incl roots any dia, any masonary at any hight. including applying root killer chemical as per manufacturer’s instructions and making good disturbed portion with PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) in cm 1:3 and finishing the surface to match with existing surface and removing of rubbish out side MoD land/area complete all as specified and directed. |
| 15 | M&L for 110mm bore on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring 10 mm gap for thermal expansion, (i) Single socketed pipes complete all as specified and directed. |
| 16 | M&L for wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes, including jointing with seal ringleaving 10 mm gap for thermal expansion Bend 87.5°, 110mm bore complete all as specified and directed. |
| 17 | Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm highcomplete all as specified and directed. |
| 18 | M&L for 50 mm bore on wall/surface on balcony unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring10 mm gap for thermal expansion, (i) Single socketed pipes incl making good to surface complete all as specified and directed. |
| 19 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and directed. |
