|
| 1 | Taking out carefully Ranigunge pattern tiles from roof stacking seviceable tiles at site and removing rubbish as directed with in a lead of 75m.(Payment to be made on the measurement of portion of roof removed). |
| 2 | Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stonefloor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cementand colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal ofwax coating of top surface of tiles with warm water andpolishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all otherincidental charges complete true to the manufacturer\"sspecification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be suppliedby the |
| 3 | (I) With application slurry @1.75 kg/ Sq.m, 20 mm sandcement mortar (1:4) & 2 mm thick cement slurry at back sideof tiles, 0.2 kg/ Sq.m white cement for joint filling withpigment. |
| 4 | (A) Deep Colour & White |
| 5 | Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stonefloor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cementand colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal ofwax coating of top surface of tiles with warm water andpolishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all otherincidental charges complete true to the manufacturer\"sspecification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be suppliedby the |
| 6 | (II) With Polymerised Adhesive [6 mm thick] & epoxygrouting materials for filling joints including spacer-2 mm[Applied directly over finished artificial stone floor/ mosaicetc.] |
| 7 | (A) Deep Colour & White |
| 8 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns,wall, facia,rise etc. with 15 mm thick [avg] cement mortar(1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing incement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing androughening of concrete surface complete.[Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]In ground floor |
| 9 | (b) Area of each Granite slab above 1.00 Square meter. |
| 10 | Supplying,fitting & fixing in position suspended false ceiling with frame work ofaluminium hollow section of size 50mm X 25mm (2.0mm thickness) combined withaluminium corners of size 38mm X 25mm, suspended by aluminium hollow tubesection of size 38mm X 25mm having size of 600mm X 600mm ceiling withaluminium composit panels (ACP) - Interior grade of thickness 3.0mm comprisingof proctective film, polyester coating, primer, aluminium coil, adhesive film,polyethylene core again with one layer adhesive film, aluminium bottom coatingand finally service coating as per manufacturer\"s specification finished withaluminium screw and silicon sealent complete in all respect including allincidental charges etc. as per direction of Engineer-in-charge |
| 11 | Wall panelling / partition with melamine faced 3 layered flat pressed wood particle board of approval make and brand as per direction of engineering-in charge of requisite grade bonded with phenol formaldehyde synthetic rasin conforming to I.S. 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping)in ground floor. |
| 12 | (A) Plain: conforming to IS: 3087 - 1985. |
| 13 | (i) plain : Exterior grade. |
| 14 | (b) 12mm thick. |
| 15 | Supplying fitting , fixing decorative lamination conforming to IS-2046 : 1995 as per approved make, brand , finish and thick ness with fitting, fixing the same on Particle / MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in-Charge. The rate includes the cost of labour, adhesive and all incidental charges thereof.in ground floor Glossy/Matt/Suede excluding surface texture of metallic lustre. |
| 16 | (i) Thick ness of laminate 1.5mm. |
| 17 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc.complete in all respect including cost of necessary fitting as required, jointing materials and two coats of painting with approved paint in any position above ground.( Payment will be made on the center line measurements of total pipe line including all specials. No seperate payment will be made for accesorie, specials.). |
| 18 | For exposed work. |
| 19 | 20 mm dia.medium quality. |
| 20 | Supplying fitting and fixing concealed cistern of approved make with flash plate cute/loop/shell/Nova (Code No. concealo- H(80 mm Body sap code 508179 of Hindware or equivalent). Matt/Gloss |
| 21 | Suppling, fitting and fixing Wall mounted water closet of white glazedvitreous chinaware of approved make and brand in position complete withnecessary nut and boalts (Equivalent to Code No. 20061 or 92065 &Model Studio or Rubbic of Hidware or equivalent.)(This item to be executed on specific permission of SuperintendingEngineer |
| 22 | Supplying, fitting and fixing Flat back urinal (half stall urinals) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. |
| 23 | 635mm X 395mm X 420mm |
| 24 | Supplying, fitting and fixing white vitreous china Sink in position on C.I. brackets including two coats of painting of brackets. . |
| 25 | Plain edge sink with over flow. |
| 26 | 610mm x 450mm x 200mm. |
| 27 | 18% Gst |
| 28 | 1% lwc Please Enable Macros to View BoQ information |
