|
| 1 | okMZ la0& 11 gqdqyxat esa pkSjk ekrk eafnj ds ikl dqvkW lQkbZ] pcwrjk ejEer] tkyh o fVu\"ksM yxkus dk dk;ZA |
| 2 | dewatering work from well by diesel or electric pump including hire of pump, fuel, generator, operater etc with all complete. |
| 3 | Cleaning of silt/malba from well with the help of rope, bucket & lavour etc with all complete. |
| 4 | Providing & spreading of bury lime into the well with all complete. |
| 5 | Disposal of silt/malba from site upto 8 km with all complete. |
| 6 | Excavation foundation in ordinary soil including lift up to 1.5 m and lead up to 30m and including all compete work. |
| 7 | P/L Cement concrete in 1:6:12 with cement sand & brick ballast etc all complete (S.O.R. 2020 REF 305 SI NO. 4) |
| 8 | R.C.C work in 1:2:4 with cement ,c/sand and 20 mm stone grit with all complete, SOR SI No. 284 |
| 9 | Mild steel work or iron in plain for R.C.C work etc. all complete. SOR SI No.504 |
| 10 | M-150 class brick work in 1:4 cement & f-sand etc all cpmlete.(Rate Tendar-I.N.1.10) |
| 11 | Plaster work in 1:3 cement coase sand etc all compt. Work. |
| 12 | Finishing walls one coat of the water proofing cement paint of approved etc all complete. |
| 13 | Wall painting with plastic emulsion paint of secent qullty approved brand and quallty etc all complete. |
| 14 | P/F mild steel or iron work in heavy sizes such as built up gate S.N. 3 REF 503 2020 |
| 15 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² .DSR 2023- 12.1.2 (1257.55X0.735=923.89) |
| 16 | Concrete with 2cm gauge approved stone ballast, approved coarse ssand and cement int proportion of 1:2:4including supply of all materials labour and tools and plants etc. required for proper completion for the work. (UP. S.O.R-2020 Ref no 279b ) |
| 17 | P F of 65 mm thick (+/-2) chunar sand stone flooring over 20mm avarage the. Base of cement mortar 1:5 (1cement : 5Coarse sand) with joimts 3mm th. Side buttered with cement mortoar 1:2 (cement :2 stone Dust) admixed with pigment to match the shade of stone and pointing with same mortar Red sand stone 2% area of item no.1 |
| 18 | P/L of Innograution Bord at site all com. |
| 19 | Add GST @ 18% Please Enable Macros to View BoQ information |
