Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition brick work/stone boulder masonry, built in cement mortarincl all quions, arches,pillars etc complete all as specified and directed |
| 2 | M & L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 3 | M & L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed. |
| 4 | M & L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar, complete all as specified and directed |
| 5 | M & L for repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and plastering the wall surface with white cement based polymer modified self curing mortar, including taking down cement or cement lime plaster, raking out joints and disposal of rubbish, complete all as specified and directed |
| 6 | M & L for repair to plaster by using readymix mixture of thickness 5 mm to 7 mm in ceiling and plastering the surface with white cement based polymer modified self curing mortar, includingtaking down cement or cement lime plaster, raking out joints and disposal of rubbish, complete all as specified and directed |
| 7 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 8 | M & L for preparation of newly plastered surfaces of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including priming coat over and including applying minimum 1mm thick wall care water proofingputty over prepared surface to achieve the surface even and smooth for painting complete, as per manufacturer\"s specification complete all as specified & directed. |
| 9 | M & L for preparation of old plastered surfaces of wall and applyingtwo coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including priming coat over and including applying minimum 1mm thick wall care water proofingputty over prepared surface to achieve the surface even and smooth for painting complete, as per manufacturer\"s specification complete all as specified & directed. |
| 10 | M & L for preparation of newly plastered ceiling surface and applyingtwo coats ofdistemper oil emulsion completeall as specified and directed. |
| 11 | M & L for complete removal of existing treatment on ceiling surface and preparation of old plastered ceiling surface and applyingtwo coats ofdistemper oil emulsion completeall as specified and directed. |
| 12 | Material & Labour for preparation of newly plastered surfaces of finished walls and applying Two coats of 100% Premium acrylic emulsion paint with PU serum, colour stay technology having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including applying minimum 1mm thick wall care water proofingputty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine with Mechanical means |
| 13 | M & L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floors etc., set andjointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layerin cement mortar 1:6 and includingdismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 14 | M & L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm,in floors / skirting etc., set andjointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layerin cement mortar 1:6 and includingdismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 15 | M & L for joint free glazed coloured GLOSSY tiles, superior quality of size 300 x 450 x 7mm thick/300 x 600 x 7 to 8mm thick, in vertical surfaces etc., set andjointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and includingdismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 16 | M & L for Granite 18- 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including moulding (rounding edges),demolition of existing stone slabs laid bedded and pointed in any mortar and including rounding to edges of stone slabs one edge, such as in cooking platform, and other similar situations etc complete all as specified and directed |
| 17 | Drilling through holes in granite stone for inserting pipes etc not exc. 25 mm dia complete all as specified and directed |
| 18 | M & L for Marble Green 18 to 20 mm thick (table rubbed and pre-mirror polished) in single piece with grooves at the edges in steps (treads/risers) and like set and jointed in neat cement slurry including pointing in epoxy grout to match marble shade, laid over and including 15 mm thick screed bed in CM 1:4 including demolition / roughening of existing surfaces incl rounding edges and double grooves (in every step) complete all as specified and directed. |
| 19 | Dismantling brick tiles or terracing tiles, single layer of roofs including demolition and removing of mud in roofs any thickness including plastering and leeping (whether full thickness removed or part thereof ) and demolition material disposed out from MoD land and including roughening surfaces of old concrete by picking, sweeping/Brushing clean and washing down with water to remove dust and apply neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed |
| 20 | M & LPCC 1:2:4 type B-0(using 12.50mm graded stone aggregate) as in roofkerbs/roof padding /benching or mud stops, and platform for mounting service tanks, rounded,chamfered on edges including necessary use and waste of fromwork etccomplete all as specified and directed |
| 21 | M & L for cleaning of all loose dirt and dust fromroof surfaces and applyingroof treatment as under :- (a) Applying a coat of fibre reinforced PU primer confirming to ASTM D412 @ 30% water dilution on prepared surfaces & laying of glass fibermesh 45 gsm over tacky surface and allow it to dry.(b) Supply and Applying 2 coats of Hybrid PU based elastomeric single component coating over primer surface @ 10kg /10.76 Sqm total consumption having below properties:-1. Elongation - 500%-600%2. Solid contents - 80%, 3.Tensile Strength - 1.6N/mm2 4. Adhesion to concrete - 2.2N/mm2 5. Initial hardness shore strength - 60Min. 6. Tear Strength - 14Mpa. 7. Total thickness of layer shall be 1.2 - 1.5mm.Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.The work for roof treatment shall include the following and the rates quoted by the bidder shall include the same-(aa) The work pertaining to roof treatment shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like PU primer etc after approval by the GE.(ab) The contractor shall upload with the documents under cover-I \"Memorandum of Understanding\"(MoU)with at least one of the manufacturers mentionedin the contract, failing which the bid shall be liable to be rejected. |
| 22 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed. |
| 23 | Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed. |
| 24 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mmcomprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and including fixing in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directedNote: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeThe work for WPC frames shall include the following and the rates quoted by the bidder shall include the same-(aa) The work pertaining to WPC frames shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like WPC board, SS screws etc after approval by the GE.(ab) The contractor shall upload with the documents under cover-I \"Memorandum of Understanding\"(MoU)with at least one of the manufacturers mentionedin the contract, failing which the bid shall be liable to be rejected. |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and including fixing in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, complete all as specified and directed.Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeThe work for WPC frames shall include the following and the rates quoted by the bidder shall include the same-(aa) The work pertaining to WPC frames shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like WPC board, SS screws etc after approval by the GE.(ab) The contractor shall upload with the documents under cover-I \"Memorandum of Understanding\"(MoU)with at least one of the manufacturers mentionedin the contract, failing which the bid shall be liable to be rejected. |
| 26 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including supplying and fixing with stainless steel butt hinges of 100mm size with necessary full body threaded star headed counter sunk S.S screws, and 4 no. stainless steel butt hinges all as per direction of Engineer-In- Charge.The work for WPC frames shall include the following and the rates quoted by the bidder shall include the same-(aa) The work pertaining to WPC frames shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like WPC board, SS screws etc after approval by the GE.(ab) The contractor shall upload with the documents under cover-I \"Memorandum of Understanding\"(MoU)with at least one of the manufacturers mentionedin the contract, failing which the bid shall be liable to be rejected. |
| 27 | Supply and Fixed Providing 30mm thick FACTORY MADE WIRE MESH SOLID WPC PRELAM DOOR SHUTTER with lamination consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh (G-304) 0.36mm minimum dia of wire and average width of aperture 1.40mm shallbe fixed with 15x15 mm square tube inside rails with screwing 8x28mm heat metal zinc coated screws and XPM aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity including supplying and fixing to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws and2 mm thick edge moulding tape or 90 degree edge bend finish etc. Complete as per direction of Engineer-in -charge, manufacturer\"s specification & drawings.complete all as specified and directed by Engr -In - Charge. approved by Engr -in -charge.The work for wpc shutter shall include the following and rates quoted by bidder shall include same.(aa) The work pertaining to wpc shutter shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like WPC shutter, SS screw etc after approval by the GE.(ab) The contractor shall upload with the documents under cover-I \"Memorandum of understanding\"(MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected. |
| 28 | S & F powder coating anodized aluminium glazed ventilator, half fixed type with 4mm thick frosted glass and half fixed with glass louvres complete with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws complete all as specified |
| 29 | S & F 300mm long Stainless steel six peg hanger chromium plated complete all as specified and directed |
| 30 | S & F 250 mm Stainless steel ,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 31 | S & F 150 mm long Stainless steel matte finish ,barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 32 | S & F 200mm long Stainless steel matte finish ,barrel tower bolts of extruded section complete all as specified and directed. |
| 33 | S & F 100mm size Stainless steel matte finish hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 34 | S & F 75 mm size a, stainless steel matte finish Bow Handlefixed with screws for kitchen cabinet & below platform complete all as specified and directed |
| 35 | S & F Stainless Steel handle matte finish fabricated type150mm long complete all as specified and directed |
| 36 | S & F Continuous (piano) hinges of size of flap 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed |
| 37 | S & F Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate for cup board / cabinet shutters complete all as specified and directed |
| 38 | S & F 300 mm long MS ordinary pattern door spring \"plate type\" including roller and roller plate complete all specified and directed. |
| 39 | S & F two (double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed. |
| 40 | Providing and fixing ofSystem aluminium window/ Ventilator Double rebate made of High-performance factory-made system Aluminium windows with Akzonobel powder coating of 60-70 microns (Any RAL Colour). Section for Outer frame should be of 91mm x35mm, Glass shutter frame shall be of 54mm x 30mm, Mesh shutter frame shall be of 54mm x 30mm, 5mm thick Single Glazed beading shall be of 15mm x 18mm.5mm thick ClearGlass shall be used in all the windows & ventilators. Stainless Steel Wire Mesh shall be used in Wire mesh Shutters. 10mm Sq bar M.S. Grill/Guard bar with 150mm c/c shall be fixed in between glass & mesh shutter. All frame corners shall be joined/assembled using self-locating corner cleats (No screwing at corners shall be allowed). All Hardware shall be used from a reputed brand, weather silicon shall be used for filling the gap between window opening & window Frame complete in all respect including all taxes. complete all as specified and directed |
| 41 | S & F in repair factory made WPC single extruded 100% lead free ISO certified board of 18mm thick bothside pre laminated shutter for KITCHEN cupboard, Room Cupboard and bathroom cupboard. The laminated shutter should be .12-.14 micron pre laminated side with laminated color and other side same laminated color of density not less than 650 kg / cum manufactured by an ISO 9001:2015 certified company. All the edges shall be covered with 2 mm thick edge moulding tape or 90 degree edge bend finish. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.The work for WPC kitchen cabinets shall include the following and the rates quoted by the bidder shall include the same-(aa) The work pertaining to WPC cupboards shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like WPC board, SS screws etc after approval by the GE.(ab) The contractor shall upload with the documents under cover-I \"Memorandum of Understanding\"(MoU)with at least one of the manufacturers mentionedin the contract, failing which the bid shall be liable to be rejected. |
| 42 | S&F in repairsinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mincluding 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink.(Minimum weight 32mm-45gms/40mm-60 gms) |
| 43 | S&F in position rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical verticalwith closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank float including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams)complete all as specified and directed |
| 44 | Framed work such as grills,gratings, etc.. with ends of bars,shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 incl dismantling of steel completeall as specified and directed. |
| 45 | Welded steel wire fabric supplied and fixed complete to wood or steel member not exceeding 4 kg complete all as specified and directed |
| 46 | M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified and direced. |
| 47 | S&F in repair 25mm dia stainless steel curtain rod, superior quality (weight not less than 300 g/RM) with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed. |
| 48 | M&L for providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed |
| 49 | S & Fstainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed |
| 50 | S & Fin repair looking mirror of size 600 x 450mm of 6 to 8 mm thick fixed with stainless steel studs complete all as specified and directed. |
| 51 | S & F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed. |
| 52 | S & F in repair vitreous china Wash hand basin white, flat back type of size 550x400mm includinga pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10X7.5X15cm, 32mm dia PVC waste pipe and 32mm bore chromium plated brass waste coupling with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 53 | S & F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, \"P\" or \"S\" trap, including connection to trap and flushing pipe, antisyphonage pipe etcincluding provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed. |
| 54 | Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following complete all as specified and directed (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical Cement + of Nerolac Perma/STP/Asian Confirm to IS 2645 - 9103 as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia PVC Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Perma Butyl tape product of Nerolac Perma/ STP/Asianand grouting around the inserted pipes by porable grout as directed by Engr-in-Charge.(d) Make angle fillets by mixing sand cement and Nerolac Perma Hypercrete/STP/Asian on all corners.(e) Brushing two coats with high performance cementitious elastomeric two components water proofing coating of Nerolac Perma Super 2K/STP/Asian of thickness 1mm in two coats, Above treatment shall be giving upto height 15cm from bottom slab and allow it dry completely. Above material shall be confirm to below properties- 1. Bulk Density - 1.73g/cc, 2. Elongation - 100% as per ASTM D412 (Min)3.Hydrostatic Pressure- 4bars as per ASTM D 7088,4. Adhesion to concrete- Greater than 1.5N/mm2, 5. Crack Bridging ability as per AS/NZS 4548.5 Min 1mm. 6. DFT - 1mm in two coats.Seperation Layer- Providing & Laying 120 gsm non woven geo textile membrane over waterproofing coating to protect the coating prior the screed.(f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with intergral waterproofing compound Cement + of Nerolac Perma as per manufacturer instructions in sunken slab.(g) Fill the sanitary gaps with Nerolac PermaSIKA/Asian sealing compounds complete. |
| 55 | S & F in repair 10 ltrs capacityPVC valveless syphonicdouble action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 56 | S & F in repairfor CP bib taps 15mm fancy type long body Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and directed |
| 57 | S & F in repairs swivel CP shower rose with long arm size 200 x 200 mm complete all as specified and directed. |
| 58 | S & F in repairs brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and directed. |
| 59 | S & F in repairs brass Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of 15 mm bore size complete all as specified and directed. |
| 60 | S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressurewith long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed |
| 61 | S & F in repair Gun-metal, globe or gate valves 25mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed |
| 62 | S & F in repairs Tubular Towel Rail 20mm dia. \"D\" type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed |
| 63 | S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed. |
| 64 | S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed |
| 65 | M & L for 50mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long, including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness and below or above ground level complete all as specified and directed |
| 66 | M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness and below or above ground level complete all as specified and directed |
| 67 | Providing and laying ISI marked 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 68 | M & L for Plain Cement concrete Type C1 1:3:6 (20 mm graded stone aggregate) asin surface channels and drains including demolition of existing cement concrete complete all as specified and directed |
| 69 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed |
| 70 | Demolition of cement concrete (reinforced) such as beams, roof, shelves, manhole cover, chajjas, parapets, water tanks and similar works complete all as specified and directed |
| 71 | M & L RCC 1:2:4 type B1 using 20mm graded stone aggregate as in lintel beams, shelves, parapets and the like including necessary form work complete all as specified. |
| 72 | M & L for Providing precast cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) as cover slabs (for man holes etc.) set in CM 1:4 and similar articles with plain faces including use and waste of formwork complete all as specified and directed |
| 73 | M & L Mild Steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 74 | Repairing of RCC projections, chajjas, roofs,facia etc by necessary preparation, scrapping, cutting , chieseling, derusting and cleaning exposed reinforcment, surfaces of damaged loose RCC and providing cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm at any height complete all as specified and directed. |
| 75 | Taking down steel tubing of 15 mm dia (Nominal bore) and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 76 | Supplying and laying of CPVC pipes of external dia 20mm, SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 77 | Taking down steel tubing of 20 mm dia (Nominal bore) and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 78 | Supplying and laying of CPVC pipes of external dia 25mm, SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 79 | Supply and fixing brass tee, elbow, reducer, coupling and all other fittings of size 20mm complete all as specified and direcetd. |
| 80 | Supply and fixing brass tee, elbow, reducer, coupling and all other fittings of size 25mm complete all as specified and direcetd. |
| 81 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 82 | Cutting into existing manholes for connecting new drains of 100mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed |
| 83 | S & F in repair PVC (SWR) 110 mm size pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all specified and directed. |
| 84 | S & F in repair PVC (SWR) 110 mm size pipes single socketed,in any length with rubber ring joints, fixed to walls complete all specified and directed. |
| 85 | S & F in repair PVC (SWR) 75 mm size pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all specified and directed. |
| 86 | S & F in repair PVC (SWR) 75 mm size pipes single socketed, in any length with rubber ring joints, fixed to walls complete all specified and directed. |
| 87 | S & F inPVC (SWR) 110 mm bends, any radius complete all specified and directed |
| 88 | S & F 75mm bore PVC (SWR) bend, any radius with / without access door complete all specified and directed |
| 89 | S & F inPVC (SWR) 110 mm Tee, equal or unequal complete all specified and directed |
| 90 | S & F 75mm bore PVC (SWR) Tee, equal or unequal complete all specified and directed |
| 91 | S & FPVC (SWR) 75 mm bore floor trap including jointing with solvent cement complete all as specified & directed. |
| 92 | S & F 110mm bore PVC (SWR) vent cowl, completeall as specified and directed. |
| 93 | S & F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof of 110mm dia pipe complete all as specified & directed. |
| 94 | S & F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof of 75mm dia pipe complete all as specified & directed. |
| 95 | S & F in repairs CP grating 100mm dia with/without waste hole complete all as specified & directed. |
| 96 | S & F in repairs CP extension nipple of 20mm bore complete all as specified & directed. |
| 97 | Excavation in trenches not exc. 1.50 m wide and not exceeding 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 98 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in each layer as in soil complete all as specified and directed. |
| 99 | Removing surplus excavated material (SOIL) to distance n. exc. 50 m and and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 100 | M & L cement concrete 1:4:8 type D2 using 40mm graded stone aggregate for foundation filling and mass concrete complete all as specified and directed. |
| 101 | M&L for RCC 1:2:4 type B1 as in columns, pillar posts etc complete all as specified and directed |
| 102 | Mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 103 | M & L for 15 mm thick rendering in cement mortar 1: 4 onbricks wall or concrete surfaces finishing the surface even and fair complete all as specified and directed. |
| 104 | M & L for applying two coats of cement based paint on wall surface over a coat of alkali resistant primer including preparing of undecorated surfaces complete all as specified and directed. |
| 105 | S & F for framed work as in doors or gates of angle or other section Fe-410 Gde 250-A quality-A with gusset plates, rails braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors etc shall be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings complete all as specified and directed. |
| 106 | M & L for Granite stone slab (best quality) 20mm thick machine cut as on vertical surfaces of wall fixed and jointed with grey cement slurry and pointed with white cement with pigment to match the shade of granite stone including moulding, grinding and polishing over 10 mm thick rendering in cement mortar 1: 3 on fair faces of bricks wall or concrete surfaces finishing the surface even and fair to receive tiles/granite/kota stone complete all as specified and directed. |
| 107 | Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, andmaking good the disturbed surface of walls and floors etc as directed. |
| 108 | Taking down carefully main switches DB\"s/ MCB DB\"s and making good the disturbed surfaces of wallscomplete all as specified and directed |
| 109 | Taking down carefully copper/aluminium sub mainwiring/ service connectionincluding teak wood batten/ conduit and making good the disturbed surface of walls complete all as specified and directed |
| 110 | M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No.in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc,ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes(with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dollycomplete all as specified and directed at site for the following:-(NOTE:Switch and socket to be measured and paid for separately):-(a) One light/fan point controlled by one switch |
| 111 | All as item No 110 above but one socket outlet point 5 Amp on an independent board complete all as specified and directed |
| 112 | All as item No 110 above but on the same board complete all as specified and directed |
| 113 | All as item No 110 above but Call bell/ buzzer point controlled by one bell push complete all as specified and directed |
| 114 | All as item No 110 above but one light point controlled by two 2 way switch complete all as specified and directed |
| 115 | All as item No 111 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board. |
| 116 | S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and directed |
| 117 | S&Fswitch piano flush button single pole two way,5 Amp 240 volt complete all as specified and directed |
| 118 | Ditto as item 117but using 15 Amps complete all as specified and directed |
| 119 | S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete all as specified and directed |
| 120 | S & F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and directed |
| 121 | S & F ceiling rose surface bakelight two to three terminal complete all as specified and directed |
| 122 | S&F bell push single pole one way 5 Amp socket outlet pointon an independent board complete all as specified and directed |
| 123 | S&F Call bell AC single pole 230 Volts Ding dong complete all as specified and directed. |
| 124 | S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed |
| 125 | S&F fan regulator electronic, step up socket type, 230 volt and conection complete all as specified and directed |
| 126 | Supply and fixingin repairs LED lamp 7/9 watt, complete all as specified and as directed. |
| 127 | Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver completeincluding Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangementscomplete all as specified and directed |
| 128 | Supply and Fixing wall/surface mountingluminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangementscomplete all as specified and directed |
| 129 | S& Fin repairDecorative wall light fixturewall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 V, 6000K, complete incl all required electrical connecting arrangements complete all as specified and directed |
| 130 | S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed |
| 131 | Supply & fixingbulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED,6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. |
| 132 | M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25 mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and directedNote-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate |
| 133 | M&L for two single core PVC insulated FRLS cable 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn throughPVC conduit 20/25mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and directedNote-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate |
| 134 | S & F MCB DB TPN 4 Way (Vertical Type) double door, for mounting, MCBs, isolator, ELCBs etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar, DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smoothfinish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make asMCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 42 protection class. |
| 135 | S&F in repairs MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA complete all as specified and directed |
| 136 | S&F in replacementsheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 137 | S&F MCB SPN 32 to 63 Amp 240 volts 10 KA breaking capacity complete all as specified and directed |
| 138 | S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and directed |
| 139 | Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed |
| 140 | Taking down electric meter and refixing on new board after rewiringin replacement of unservicable wire complete all as specified and directed |
| 141 | Taking down ceiling fan an type and any location and refixing after oiling , greesing, painting ,servicing and writing sameMES number in black colour complete all as specified and directed |
| 142 | Supply and fixing of heavy duty metal body exhaust fan single phase 230/240 volt of size 300 mm sweep including holes of suitable size grouting of nuts and bolt etc and making good to match the existing surface including louvers and making connetion with twisted copper flexible wire 23/0.076mm,complete all as specified and directed. |
| 143 | S & F water heaterstorage type electric BEE 5 star ratedof capacity 25 ltrsto operate on 230 volt AC,vertical type including 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible steel hose pipe of size 15 mm, 450 mm lenght & suitable plug top of 16 Amp capacity complete all as specified and directed. |
| 144 | Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sq mm 4.0 core complete all as specified and directed. |
| 145 | Excavation in trenches in soft/loose soil n.exc 1.5M wide and n. exc 1.5 M depth and getting out, including framing bottom surface for laying cables complete all as specified and directed |
| 146 | Returning, filling in soil watering and ramming into layers of 25cm after laying of cable complete all as specified and directed |
| 147 | Disposal of surplus soil n.exc 50M distance from the starting point and depositing where complete all as specified and directed |
| 148 | M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and directed |
| 149 | Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and directed |
| 150 | M & L for Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 5 of MES SSR Pt-I 2009 print and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
