|
| 1 | M&L for brick work with fly ashbricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 including demolition of old brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles complete all as specified and directed. |
| 2 | M & L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar, complete all as specified and directed |
| 3 | M & L for repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and plastering the wall surface with white cement based polymer modified self curing mortar, including taking down cement or cement lime plaster, raking out joints and disposal of rubbish, all complete all as specified and directed |
| 4 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 5 | M & L for preparation of newly plastered surfaces of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including priming coat complete, as per manufacturer\"s specification complete all as specified & directed. |
| 6 | M & L for preparation of old plastered surfaces of wall and applyingtwo coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including priming coat complete, as per manufacturer\"s specification complete all as specified & directed. |
| 7 | M & L for preparation of new wall surface and applyingtwo coats ofcement base paint over a coat of alkali resistant primer completeall as specified and directed. |
| 8 | M & L for preparation of old wall surfaceand applyingone coats ofcement base paint over a coat of alkali resistant primer completeall as specified and directed. |
| 9 | Dismantling timber scantling 40 sq cm and over in framed work in any position. |
| 10 | S & F of second class hard wood timber scantling clean sawn framed and fixed in any position and direction complete all as specified and directed. |
| 11 | S & F of rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides fixed with angle cleats or other connecting plates conforming to Gde Fe-410 W complete all as specified and as directed. |
| 12 | S & F in repair for 0.50 mm thick pre-painted galvalume aluminium zinc alloy coated steel (550 Mpa) corrugated sheet of any colour, double ribbed trapezoidal profile in desired length etc, as in roof covering/cladding to wall, with joints overlapped and fastened with fasteners using hot dipped zinc coated self drilling hexagonal washer head fasteners complete all as specified and directed. |
| 13 | S & F in repair for 0.50 mm thick pre-painted galvalume aluminium zinc alloy coated steel (550 Mpa) plain sheet of any colour, double ribbed trapezoidal profile in desired length etc, as in roof covering/cladding to wall, with joints overlapped and fastened with fasteners using hot dipped zinc coated self drilling hexagonal washer head fasteners complete all as specified and directed. |
| 14 | S & F in repairfalse ceiling at all heights with with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of ize 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing complete all as specified and directed |
| 15 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed. |
| 16 | Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed. |
| 17 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mmcomprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and including fixing in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directedNote: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 18 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and including fixing in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directedNote: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 19 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including supplying and fixing with stainless steel butt hinges of 100mm size with necessary full body threaded star headed counter sunk S.S screws, and 4 no. stainless steel butt hinges complete all as specified and directed |
| 20 | Supply and Fixed Providing 30mm thick FACTORY MADE WIRE MESH SOLID WPC PRELAM DOOR SHUTTER with lamination consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh (G-304) 0.36mm minimum dia of wire and average width of aperture 1.40mm shallbe fixed with 15x15 mm square tube inside rails with screwing 8x28mm heat metal zinc coated screws and XPM aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity including supplying and fixing to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws and2 mm thick edge moulding tape or 90 degree edge bend finish etc. complete all as specified and directed manufacturer\"s specification & drawings. |
| 21 | S & F Stainless Steel Bow handle matte finish fabricated type 150mm long complete all as specified and directed |
| 22 | S & F 200mm long Stainless steel matte finish ,barrel tower bolts of extruded section complete all as specified and directed. |
| 23 | S & F 250 mm Stainless steel ,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 24 | S & F 300 mm long MS ordinary pattern door spring \"plate type\" including roller and roller plate complete all specified and directed. |
| 25 | S & F two (double) legged floor door stopper of aluminum body & tongues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed. |
| 26 | M & L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floors etc., set andjointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layerin cement mortar 1:6 and includingdismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 27 | M & L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm,in floors / skirting etc., set andjointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layerin cement mortar 1:6 and includingdismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 28 | M & L for joint free glazed coloured GLOSSY tiles, superior quality of size 300 x 450 x 7mm thick/300 x 600 x 7 to 8mm thick, in vertical surfaces etc., set andjointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and includingdismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 29 | M & L for machine cut kota stone slab as in flooring 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etccomplete all as specified and directed |
| 30 | M & L for machine cut kota stone 20 to 25 mm thick as in steps, risers, skirting, dado etc, bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix stone complete all as specified and directed |
| 31 | S & F in repair Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame 5mm thick PVC sheet fillet of width 35mm for wall fixed 35cm centre to centre on both side horizontal and vertical to make PVC Frame as per specifications and drawing complete all as specified and directed |
| 32 | M & L preparation of old wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 33 | M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 34 | M&L preparation of old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 35 | M & L of preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed |
| 36 | M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing and connections of 15mm bore complete all as specified and directed |
| 37 | M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing and connections of 20mm bore complete all as specified and directed |
| 38 | S & F in repair 15mm bore PVC connection 450mm long with brass coupling and washer complete all as specified and directed |
| 39 | S & F in repairfor CP bib taps 15mm fancy type long body Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and directed |
| 40 | S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressurewith long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed |
| 41 | S & F in repairs brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and directed. |
| 42 | S & F in repair central hole wash hand basin mixer,fancy type,brass chromium plated, with round spout with waste system , including plugging and fixed, suitable of 15 mm bore pipe complete all as specified and directed |
| 43 | S & F in repair gun metal gate valve screwed both ends to 20mm bore pipe complete all as specified and directed |
| 44 | S&F in position rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical verticalwith closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank float including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams)complete all as specified and directed |
| 45 | S & F in repairs Tubular Towel Rail 20mm dia. \"D\" type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed |
| 46 | S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed. |
| 47 | S & F in repairs 600x450mm beveled edges mirror of selected quality mounted on 4mm thick AC building board/ PVC frame or 6 mm thick ply fixed to wall with rowl plug and screws complete all as specified and directed |
| 48 | S & F in repair vitreous china Wash hand basin with pedestal white, flat back type of size 550x400mm includinga pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10X7.5X15cm, 32mm dia PVC waste pipe and 32mm bore chromium plated brass waste coupling with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.(excluding tap, waste chain & plug) complete all as specified and directed. |
| 49 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern) white includig fixing bolts, soft closing seat cover and flush pipe \"P\" and \"S\" trap, including connection to trap and flushing pipe , antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor complete all as specified and directed. |
| 50 | S & F in repair Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and wall hook including making connections & fixed in position complete as specified superior quality complete all as specified and directed |
| 51 | S & F in repair 10 ltrs capacityPVC valveless syphonicdouble action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 52 | S & F in repair Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) and including waste pipe 32 mm dia and Waste coupling of PTMT any colour half of full threaded suitable for 32 mm dize discharge pipe complete all as specified and directed. |
| 53 | S & F in repair 25mm diafancy type drapery curtain rod made of stainless steel including knobs (Latto) and side brackets complete all as specified and directed. |
| 54 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed |
| 55 | S & F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 150mm long (02) suitable handle in each door, hinges, powder coated aluminum snap beading screws etc. complete all as specified and directed |
| 56 | S & F 5mm thickness sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed |
| 57 | S & F in repair 0.36 mm dia stainless steel grade 304wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed. |
| 58 | M & L for 50mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long, including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness and below or above ground level complete all as specified and directed. |
| 59 | Demolition ofPCC (un-reinforced) in ground floors and pavings not exc. 15 cm thickness below or above ground levels completeall as specified and directed. |
| 60 | M & L hard core of broken stone gauage not exc 63 mm deposited spread and levelled n.exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and directed |
| 61 | M & L cement concrete 75 mm thick 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and directed |
| 62 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 63 | M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 64 | Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, andmaking good the disturbed surface of walls and floors etc complete all as specified and directed |
| 65 | Taking down carefully main switches DB\"s/ MCB DB\"s and making good the disturbed surfaces of walls complete all as specified and directed |
| 66 | Taking down carefully copper/aluminium sub mainwiring/ service connectionincluding teak wood batten/ conduit and making good the disturbed surface of walls complete all as specified and directed |
| 67 | M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No.in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc,ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes(with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dollycomplete all as specified and directed at site for the following:-(NOTE:Switch and socket to be measured and paid for separately):-(a) One light/fan point controlled by one switch |
| 68 | All as item No 67 above but one socket outlet point 5 Amp on an independent board complete all as specified and directed |
| 69 | All as item No 67 above but on the same board with other switch complete all as specified and directed |
| 70 | All as item No 67 above butCall bell/ buzzer point controlled by one bell push complete all as specified and directed |
| 71 | All as item No 67 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent boardcomplete all as specified and directed |
| 72 | S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and directed |
| 73 | Ditto as item 72but using 15 Amps complete all as specified and directed |
| 74 | S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete all as specified and directed |
| 75 | S & F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and directed |
| 76 | S & F ceiling rose surface bakelight two to three terminal complete all as specified and directed |
| 77 | S&F bell push single pole one way 5 Amp socket outlet pointon an independent board complete all as specified and directed |
| 78 | S&F Call bell AC single pole 230 Volts Ding dong complete all as specified and directed. |
| 79 | S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed |
| 80 | S&F fan regulator electronic, step up socket type, 230 volt and conection complete all as specified and directed |
| 81 | Supply and fixingin repairs LED lamp 7/9 watt, complete all as specified and as directed. |
| 82 | Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver completeincluding Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangementscomplete all as specified and directed |
| 83 | Supply and Fixing wall/surface mountingluminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangementscomplete all as specified and directed |
| 84 | S& Fin repairDecorative wall light fixturewall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 V, 6000K, complete incl all required electrical connecting arrangements complete all as specified and directed |
| 85 | S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed |
| 86 | S&F in repair super bright LED (2X2), 36 W, 6000 K recess mounting with high efficent LED source complete all as specified and directed |
| 87 | M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25 mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and directedNote-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate |
| 88 | M&L for two single core PVC insulated FRLS cable 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn throughPVC conduit 20/25mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and directedNote-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate |
| 89 | S & F MCB DB TPN 4 Way (Vertical Type) double door, for mounting, MCBs, isolator, ELCBs etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar, DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smoothfinish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make asMCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 42 protection class. |
| 90 | S&F in repairs MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA complete all as specified and directed |
| 91 | S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 12ways 240 volt with 200 Amps rated bus bar made out 1.2mm thickdouble doorcomplete all as specified and directedNote: MCB required to be fixed shall be paid for separately under respective items ofthis Schedule ‘A’ |
| 92 | S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 8 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thickdouble door complete all as specified and directedNote:- MCB required to be fixed shall be paid for separately under respective items ofthis Schedule ‘A’ |
| 93 | S&F MCB SPN 32 to 63 Amp 240 volts 10 KA breaking capacity complete all as specified and directed |
| 94 | S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and directed |
| 95 | Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed |
| 96 | S&F BLDC ceiling fan 1400 mm sweep with powder coated aluminium blades min air delivery220 m³ /min, power consumption 26/28 watt, star rating (BEE) 5 star, 350 RPMwith down roadas per site requirement along with connected accessories incl provn of connection with three core flexible copper cod of size 1.5 sqmm from ceiling rose to fan min 2 year product warranty and 05 year motor warranty including disconnecting and taking down old unserviceable ceiling fan and deposited in AGE E/M (W) store yard for BER action complete all as specified and directed. |
| 97 | Supply and fixing of heavy duty metal body exhaust fan single phase 230/240 volt of size 300 mm sweep including holes of suitable size grouting of nuts and bolt etc and making good to match the existing surface including louvers and making connetion with twisted copper flexible wire 23/0.076mm, including disconnecting and taking down old unserviceable exhaust fan and deposited in AGE E/M (W) store yard for BER action complete all as specified and directed. |
| 98 | Supply and fixing exhaust/fresh air fan 230/240 V of size 250 mm sweep (PVC body) 1100-1325 RPM with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed. |
| 99 | Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sq mm 3.5 core complete all as specified and directed. |
| 100 | Excavation in trenches in soft/loose soil n.exc 1.5M wide and n. exc 1.5 M depth and getting out, including framing bottom surface for laying cables complete all as specified and directed |
| 101 | Returning, filling in soil watering and ramming into layers of 25cm after laying of cable complete all as specified and directed |
| 102 | Disposal of surplus soil n.exc 50M distance from the starting point and depositing where complete all as specified and directed |
| 103 | M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and directed |
| 104 | Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and directed |
| 105 | M & L for Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 5 of MES SSR Pt-I 2009 print and as directed. |
