|
| 1 | Cutting of Grass Shurbs, Weeds, Bushes, Vegetations, etc. with the help of Jungal Jim Tractor/manually including small trees girth up to 30cm along the Sides of Runway, PTT, Links, etc. including collecting and disposing all waste, trimmings etc outside AF land as required, complete all as specified and as directed.NOTES: (1) The height of grass shrubs, weeds, bushes, vegetation etc should not exceed 200mm after cutting and it shall measured in Pocket wise which includes cutting of edges in drain/PTT/ any area other than grass surfaces.(2) Measurement for payment shall made be after execution of above mentioned requirement in pocket wise.(3) Pocket/Task area shall be as decided and directed by Engineer in Charge. (4) Proper record shall be maintained wrt location & date of execution of work.(5) Disposal of waste is deemed to be included in quoted rates. Contractor shall ensure immediate removal of all waste materials after cutting, trimming etc under his own arrangement and dispose off outside AF land as per Municipal Corporation/State Govt regulations. (6) Contractor shall ensure that the waste/trims are not blown on runways, PTT, links etc and shall depute labourers for immediate cleaning/sweeping & removal from site to avoid FOD. Contractor\"s quoted rate shall be deemed to be inclusive of the above aspect. |
| 2 | M&L for Grubbing up tree/shrub trunk manually or mechanically including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable material and removing of unserviceable material from AF land and clearing site complete all as specified and as directed. |
| 3 | Surface dressing n exc 15 cm deep, in hard and dence soilcomplete all as specified and as directed.Note :- The rates also include for Removing stone boulders from site , stacking materials in regular stacks for measurement. |
| 4 | Supply and Spreading/ levelling soil/earth/sand in layer n exc 25cm thick in layer, fine soil shall be boulder free as approved by Engr-in-Charge. |
| 5 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out as in any type of soil complete all as specified and as directed. |
| 6 | Cement concrete in foundations, filling and mass concrete C-2 , PCC (1:3:6)using 40 mm graded stone aggregate |
| 7 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6complete all as specified and directed. |
| 8 | M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses with CM 1:4complete all as specified and directed. |
| 9 | Rolling and consolidating formation surfaces in cutting by using 8 to 12 tone powerroller. Rolled to required camber and gradientcomplete all as specified and as directed. |
