Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down carefully surface aluminum or copperpoint wiring from exisitng PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete. |
| 2 | M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including rigid non-metallic PVC concealed conduit of suitable size but not less than 20mm dia, with all fittings, concealed in wall/roof /floor including decorative modular cover plates (inner and outer) suitable for housing modular pattern switches/ sockets/ regulators etc. along with necessary metal boxes flush mounting in the wallduly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for :- |
| 3 | All as per item No. 02 here-in-before but one fan point controlled by one switch6 Amps 1 way.. |
| 4 | All as per item No. 02 here-in-before but one socket outlet 6 amp controlled by one switch on the same board with other switches. |
| 5 | All as per item No. 02 here-in-before but one socket outlet 6 amp controlled by one switch on indepdendent board. |
| 6 | All as per item No.2 above but point wiring with 4.0 sqmm PVC insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket out let on independent board. |
| 7 | S & F Modular switch 6 Amp one way 230 V AC 1 moduleMake : ROMA(Anchor)/Havells (Crabtree)/Legrand |
| 8 | S & F Modular switch 16 Amp one way 230 V AC 1 moduleMake : ROMA(Anchor)/Havells (Crabtree)/Legrand |
| 9 | S & F Socket 6A/16A - 2/3 pin combined 2 module multi socket for all pins 230 V AC Make : ROMA(Anchor)/Havells (Crabtree)/Legrand |
| 10 | S & F Socket Socket, 6A - 2/3 pin combined 2 module,multi socket for all pins 230 V ACMake : ROMA(Anchor)/Havells (Crabtree)/Legrand |
| 11 | S & F fan regulator electronic socket step type 120 W complete all as specified.Make : ROMA(Anchor)/Havells (Crabtree)/Legrand |
| 12 | S&F ceiling rose 3 plates polycarbonate body complete. |
| 13 | S & F Sub main wiring with PVC insulated cable 4 single core 10 sq mm 1100 V grade with stranded copper conductor on and incl rigid PVC conduit concealed in wall / roof/ceiling(ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 10 sq mm for earthcontinuity all as directed. |
| 14 | S & F Sub main wiring with PVC insulated cable 2 single core 6 sq mm 1100 V grade with stranded copper conductor on and incl rigid PVC conduit concealed in wall / roof/ceiling(ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 6.0 sq mm for earthcontinuity all as directed.Note : 2 length singlecore PVC insulated multistraded copper conductor (FRLS)cable conduit and one length of earth cable shall be measured and paid for one length |
| 15 | S&F in repair LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 115 lumen per watt and total power consumption not more than 20 watt including driver.It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 completeMake-Philips Cat part BN308C LED20S-6500 L120 PSU WH,Crompton Cat part CIS-305-20-57-SL-DP-NWH,Havells Cat no STOUTPLUS600BS20WLED840SPCWH |
| 16 | S&F in repair LED batten (0.6M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 1000 lumens at a minimum system efficacy of 100 lumen per watt and total power consumption not more than 10 watt including driver.It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete |
| 17 | M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-Iconnected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete. |
| 18 | Taking down carefully sub main wiring with PVC casing capping/PVC surface conduit and making good disturbed surfaces complete. |
| 19 | Taking down MCB distributionboards with incoming and out going controls ,any make ,any size |
| 20 | S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 8 ways. |
| 21 | S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with TPN , 415 volts, 8 ways. |
| 22 | S & F MCBs of \"B\" series having breaking capacity 10 KA ISImarkedincluding required wiring connection with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 Amps |
| 23 | S & F MCBs of \"B\" series having breaking capacity 10 KA ISImarkedincluding required wiring connection with copper lugs of suitable size provided in MCB DBs of Double pole 40 to 63 Amps |
| 24 | Supply and fixing 415V 10KA \"B\" curve miniature circuit breaker (MCCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioningTPN 40 To 100 AMP |
| 25 | S & F Ceiling fan 1200mm sweep,5 Star rated with ISI working on single phase, 230volt,50Hz AC supply complete with down rod and canopy including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of size 0.75 sq.mm complete as as directed.Make:Havells(Model no. ES-50 Premium 5)/Bajaj/ Almonard/Keithan/CromptonNote: Removed ceiling fans shall be returned to mes store |
| 26 | S & F Exhaustfan 300mm sweep 1440 RPM ,Heavy Duty Exhaust Fans metal body typewith ISI working on single phase, 230volt,50Hz AC supply complete with Lovers and fixing acessories complete withinsulated 3 core copper cable of size 0.75 sq.mm complete as as directed.Make:Havells/Bajaj/ Almonard/Keithan/CromptonNote: OLD unserviceable shall be returned to MES Store |
| 27 | S&F water heater 25 litre capacity BEE star rating 5 in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25°C to 75° C, outer tank made of non metallic engineering plastic, inner tank made of extra thicksuperior cold rolled steel provided with high density PUF insullation complete.Note: OLD unserviceable shall be returned to MES Store |
| 28 | Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundationof poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge. |
| 29 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in hard and dense soil |
| 30 | Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point. |
| 31 | Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete. |
| 32 | Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified. |
| 33 | Dismantling and taking out UG cable any size unserviceable items fixed in any position and removal from site, all as directed. |
| 34 | S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 25 Sqmm nominal cross section 3.5 core laid in trenches,fixed to pole or passing through pipes including all necessary clamps,nuts, bolts washers complete all as specified and directed. |
| 35 | S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 Sqmm nominal cross section 2 core laid in trenches,fixed to pole or passing through pipes including all necessary clamps,nuts, bolts washers complete all as specified and directed. |
| 36 | Supply and fixing inbuilding LED street light fitting 50 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, clamp bracket 1.2 mtr long medium grade 32 mm GI pipewith nut bolt and clamp suitable size with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 37 | Supply, installation, testing and commissioning of LT panel board fabricated out of 2mm thick stainless steel (SS 316) with copperbus bar 4 pole equal of capacity in colour code R, Y & B, 100 Amps 415 Volts indoor type wall mounted of size not less than 750mmx650mmx 250mm, installed on procelain insulators with bus bar chamber. The panel shall be dust and vermin proof, protection class IP 42 class, front opening & compartmental type with approach for cable entry and for easy maintenance duly internally wired with FRLS, PVC insualated stranded copper conductor cable of 1.0 Sqmm including LED indicator for R, Y & B and comprising of the following :-Incoming : One number MCCB 125 Amps 4 pole 16 KA 415 Volts, 70-100%, 50 Hz.Outgoing : (a) MCB DP 10 KA \"B\" series 40-63 Amps - 10 Nos |
| 38 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store |
| 39 | S & F in repair of Rewinding the motor of ceiling fan 1200/1400 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete. |
| 40 | S & F in repair of ball bearing of ceiling / exhaust fan of any size and make as required with alignment of shaft and testing complete. |
| 41 | S & F in repair of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceilingfan in FR plastic casing including connection complete. |
| 42 | S & F in repair of shaft of approved quality for ceiling fan / exhaust fan any make any type & size as required. |
| 43 | M&L for painting of ceiling fan of any sweep and make with one or more coats of spray painting with best qualityenamel PU paint with white colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc |
| 44 | S & F in repair of rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods of any size and make as required. |
| 45 | S & F in repair of PVC canopy suitable for ceiling fan of any size and make as required. |
| 46 | M & L for Hanging only ceiling fan andconnectingup including provision of cable from ceiling rose or connector to fan |
| 47 | M&L for clamp and back plates fabricated from steel sections conforming to Gde Fe 410-O or Fe 310-O including nuts, bolts, washer, drilling holes for bolts in any shape or size for fixing ceiling fan complete. |
| 48 | Complete removal of existing roof treatment/APP Membrane over roof slab etc of any descriptionincl removal all rubbish material outside of MoD Land |
| 49 | Demolition of PCC of any description and in any position not otherwise specifically provided for all as specified and as directedincl removal all rubbish material outside of MoD Land |
| 50 | M&L padding inPCC 1:2:4 type B-0 (using 12.5mm size graded stone aggregates) laid to average consolidated thickness of 40mm to provide a finished slope of 1:30 finished even and smoth without using extra cement. |
| 51 | M&L screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes in roof mixed with water proofing compound @3% by weight of cement even and smooth without using extra cement. Note :- WPC shall be measured and paid seprately as supply Only. |
| 52 | Supply only integral waterproofing compound ISI marked. |
| 53 | Waterproofingmembrane:Supplying and applying PU-Acrylic Hybrid Polymer reinforced liquid applied elastomeric waterproofing membrane, impregnated with nano- fibre applied with brush/roller having SRI >107 with an elongation of >300% and tensile strength of 2.8 MPa as per ASTM D 412, Crack Bridging of 2.5mm as per ASTM C 1305. The system includes final base preparation as per note given below, applying Home Sheild Roof Kool & Seal or approved equivalent in two coats at 1.5 kg per Sqm, complete as per Manufacturer specifications. Waterproofing membrane to be terminated on parapet wall in a V groove of size 25 mm x 25 mm atleast 300mm aboveFFL whichshould be sealed with Polymer Mortar.Make : Berger- Roof Kool & Seal, Asian-Damp Proof Ultra, Pidilite-Roof Seal Ultra, STP- ShaliUrethane BTD plus Surface Preparation:i) The surface to be treated should be sound and free from all types of dirt, dust and debris. Clean surface by brushing, scraping or chipping to eliminate all defective materials and foreign matter. Proper surface preparation needs dry mechanical grinding to expose base Substrate. Making of angle fillets(75mm*75mm) all around the periphery of the wall with polymer modified mortar using SBR Latex Plus.ii) All construction joints and cracks >1mm shall be treated by cutting V groove and filling with polymer modified SBR Latex and and including reinforced with Fiber Mash 45 Gsm membrane dipped in PU liquid Membrane before the 1st coat application. |
| 54 | M&L for making v groove of crack surface and filling with PU sealent grouting by nozzle carefully & plug with PU sealent as per manufacturer instruction complete all as specified and directed. |
| 55 | Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete allas specified and directed. |
| 56 | M&L Non- skid joint free coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 57 | M & L coloured glazed joint free ceramic tiles 7 to 8mm thick in vertical surface area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting over & including 10mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as approved and directed |
| 58 | M&L for non skid ceramic coloured tiles of design as approved7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 59 | M&L Non- skidjoint free coloured ceramic matching tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 60 | M&L Non- skidjoint free coloured ceramic matching tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, on wall as in skirtingetc. set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 10 mm thick wall plaster in CM 1:4 complete all as specified and directed |
| 61 | M&L for coloured Glazed ceramic tiles 300 x 450 x 7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc,. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and directed . |
| 62 | M&L 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) complete all as specified and directed. |
| 63 | Dismantling of stone slabs and tiles of any description or thickness, laid dry or laid dry and pointed in any mortor in floor, apron etc complete all as specified and as directed |
| 64 | M&L 15-16mm thick granite work (table rubbed & polished) (Rajasthan black) in window-cills etc laid over & incl 15 mm screed thick in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified and directed . |
| 65 | M & L machine cut kota stone slab flooring 20-25mm thick,size of kota stone 450x550 mm over and including 100-300 mm thick wide white marble border/strips over and incl cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing complete all as specified and directed. |
| 66 | M & L machine cut kota stone slab on vertical surface of wall, riser etc in single piece n exc 1.5 m in length of 20 to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeover and including 10 mm thick cement plaster in CM 1:4 |
| 67 | M & L machine cut kota stone slab flooring 20-25mm thick in steps in single piece laid over and including 15mm thick bedding layer in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. |
| 68 | M & L machine cut kota stone slab flooring 18-22mm thick in riser of steps, dado, skirting in single piece laid over and including 10mm thick bedding layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. |
| 69 | M & L for Rounding to edges of stones slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed. |
| 70 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material outside of MD Land complete all as specified and directed. |
| 71 | M&Lfor brick work with sub-class \"B\" bricks (using old size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:6 complete all as specified and directed |
| 72 | M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. |
| 73 | M & L brick work in half brick thick wall using Subclass B bricks built in cement mortar 1:6 complete all as specified and directed. |
| 74 | Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish outside MD land complete all as directed. |
| 75 | M&L rendering 15 mm thick on stone masonry / Brick masonary wall surface surfaces using Ready mix plaster as per manufacturer directions including necessary scaffolding arrangements up to any height complete all as specified and as directed. |
| 76 | M&L rendering 15 mm thick on stone masonry / Brick masonary wall surface surfaces using Ready mix plaster as per manufacturer directions complete all as specified and as directed. |
| 77 | M&L rendering dubbing coat average thickness 10 mm thick on stone masonry / Brick masonary wall surface surfaces using Ready mix plaster as per manufacturer directions complete all as specified and as directed. |
| 78 | M&L rendering 15 mm thick on Ceilingsurfaceusing Ready mix plaster as per manufacturer directions complete all as specified and as directed. |
| 79 | M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion (Ist quality) white or tinted by mechanical means over 2 mm thick wall care putty & a coat of primer to make smooth the undulated surfaces complete all as specified and directed. |
| 80 | M&L for prepartion of old surface of walls,including cleaning of any mortar drops, fungus efflorescent salts etc and applying two coats of distemper with distemper oil emulsion (Ist quality) white or tinted by mechanical means over a coat of primer over 2mm thick wall care putty to make smooth the undulated surfaces complete all as specified and directed. |
| 81 | M&L for New plastered surface of walls of any description applying 2 mm thickwall putty and applying two coats of acrylic emulsion exterior grade weather proof paint over a coat of primer complete all as specified and directed upto three storey building including scaffloding arrangement all as specified and directed. |
| 82 | M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper over 2 mm thick ofwall putty includinga coat of primer complete all as specified and directed. |
| 83 | M&L for mass Cement concrete 1:4:8type D-2using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 84 | M&L 60 mm thick PCC interlocking tiles Rubber moulded precast concrete with grey cement & with pigment conforming to IS 15658-2006 with M-35 Grade any shape and size including 25 mm thick sand cusion and taking down old existing tiles complete as directed |
| 85 | M&L for precast concrete kerb stones of cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) solid blocks, exc 10 cm in width and setting in cement mortar 1:4 and taking down old existing kerb stone complete all as specified and as directed. |
| 86 | M&L for rubber moulded chequered cement concrete tiles 30 cm x 30 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and pigments over and including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and as directed. |
| 87 | M&L for hardcore of broken stone boulder of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to true surface. |
| 88 | Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) |
| 89 | M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate, 75 mm thick in plinth protection laid in panels and finished even and fair including necessary form work complete all as specified and as directed.Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in quoted rate for concrete in plinth protection. |
| 90 | Dismantling asbestos cement (corrugated ,semicorrugated,etc.)sheets in roof covering and removing debris off the premises |
| 91 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates for supprting stone roof slab incl making hole filling holes with PCC 1:1.5:3. |
| 92 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled forfixing of steel sheeting or covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete |
| 93 | M& L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 94 | M& L for Pre- painted galvatume aluminum zinc coating GI based Plain steel shee 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 95 | Dismantling wrought iron or mild steel, including gates work of any description not otherwise provided for complete all as specified and directed. |
| 96 | Dismantling ceiling boards of any descriptionin false ceiling and removing debris off the premises |
| 97 | Providing and Fixing suspended false ceiling using mineral fiber board of size 600x 600 x 15 mm as ceiling over and including suspension metal sysytem designer grid(15 mm grid 8 mm return ) bevelled regular superfine XL 15 mm/silhoute complete incl necessary hanging sysytem arrangment 6mm dia suspenders as per manufacturer instruction which is required to be made from existing roof of any description complete all as specified and directed by EIC.(Make- Armstrong , EVerest , Gypsum , Bison and Aerolite) |
| 98 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (Ist quality) over and including one coat of red oxide zinc chrome primer complete all as specified and directed. |
| 99 | M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed. |
| 100 | M & L for preparation of newly or previously untreated surfaces of concrete of any description over 10cm girth or width , not otherwise described applied two coat of sythetic enamel paint over a coat of primer |
| 101 | Supply and fix500 litres capacity triple layer, white coloured rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete including dismantling old water tank. |
| 102 | Supply and fix in repair 1000 litres capacity triple layer, white coloured rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete ncluding dismantling old water tank.. |
| 103 | Taking up or down 15mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. |
| 104 | Taking up or down 20 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. |
| 105 | Taking up or down 25mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed |
| 106 | S&F15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed |
| 107 | S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings,fixed to walls and ceiling or in floor complete all as specified and directed |
| 108 | S&F25mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed |
| 109 | S&F in repair pillar taps 15mm bore swan neck cast coper alloy CPfancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. |
| 110 | S&F in repair bib taps 15mm bore long body cast coper alloy CPfancy type,with crutch or butterfly handle, screwed down, screwed for iron pipe or forunion complete all as specified and directed. |
| 111 | S&F in repair bib taps 15mm bore short body cast coper alloy CPfancy type,with crutch or butterfly handle, screwed down, screwed for iron pipe or forunion complete all as specified and directed. |
| 112 | S&F in repair two way tap 15mm bore cast coper alloy CPfancy type,with crutch or butterfly handle, screwed down, screwed for iron pipe or forunion complete all as specified and directed. |
| 113 | S&F in repair brass CP towel rail 20mm dia, D type 60 cm long between flanges complete all as specified and directed. |
| 114 | S&F in repair double soap dish, CP brass \"R\" typefixed to plugs with chromium plated brass screws complete all as specified and directed.. |
| 115 | S&F in repair brass chromium plated shower rose 125mm x 125 mmsize with or without swivel joints, including fixin to steel pipe or union complete all as specified and directed. |
| 116 | S & F in repair 15 mm dia angle valve, cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed. |
| 117 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 118 | S&F in repair 20mm bore gun metal gate valve, screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed. |
| 119 | S & Fin repair wall mixer CP hot & cold, 15mm bore with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipeand plugging complete all as specified and directed. |
| 120 | S & F in repair 250 mm corner glass shelf fixed with brass brackets and screws complete all as specified and directed. |
| 121 | Supply & fixing in repair vitreous china squatting pan, \"Orissa patteren, size 580 x 440 mm white, with integral foot rests including P or S trap but (excluding flushing cisteren and flush pipe) including connection to trap and flushing pipe antisyphonage pipe etc complete all as specified and directed. |
| 122 | S&F in repairvitreous china wash down water closet pan ( pedestal pattern) white including connections to drain ( or outgoing pipe) and to flushing pipe anti sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete |
| 123 | S&F in repairs PVC valveless, syphonic action flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flush pipe complete all as specified. |
| 124 | Supply and fixed in repair vitreous chinawash hand basin, white of size 550mm x 400mm with pedestal includingand 32mm dia brass chromium plated waste coupling andPVC waste pipe complete including angle iron brackets complete |
| 125 | S&F in repair Vitreous China urinals, full stall type white, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. |
| 126 | S&F in repair urinal spreader of brass chromium plated suitable for 15mm dia pipe complete. |
| 127 | S& F 32 mm bore PVC waste pipe 75 cm long of approved make with 32mm dia connector suitable for WHB complete all as specified and directed. |
| 128 | S/F in repair stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup , 25mm. |
| 129 | S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms) |
| 130 | M & L for Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) |
| 131 | S/Fin repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 132 | S&F in repair cp Toilet paper roll holder with flap Vitreous china with CP brass screw. |
| 133 | S&F as in repair cromium plated brass hand shower (health faucet) with 8mm dia 1.00m long flexible tube and wall hook |
| 134 | S & Fin repairs stainless steel grating 100 mm dia |
| 135 | M & L for WPT in sunken floors as described here under:- (i) Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement(ii) Liquid memberane water proofing applied in 2 coats over a primer coat using a brush, roller, spray or squeegee first coat at rate of 1.2 Kg/Sqm and 2nd coat at 1.0 KG/sqm all as per manufacturer\"s instructions including preparation of surfaceand filling lime concrete 1:4:8 type D2 ( 40 mm graded aggregate) complete including demolition of existing sunken treatment all as specified an as directedincluding 50 mm pvc spout pipe Note :-(i) liquid membrane water proofing membrane shall belaid in sunken floor and on sides up to finished floor level.(ii)The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii)Above aspects are deemed to be included in quoted rate. (iv) price of water proofing compound is also included (v) Slab area only will be measured for payment purpose.incl removal all rubbish material outside of MoD Land |
| 136 | S & F in repair 110mm bore PVC soil Grade A, waste and rainwater (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including necessary PVC clamps at joints for fixing with wall complete. |
| 137 | S & F in repair 110 mm bore PVC (SWR) bends for fixing pipes at joints for fixing with wall complete. |
| 138 | Dismantling of 75mm bore cast iron soil / waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or fromtrenches, if required complete all as specified and directed. |
| 139 | Dismantling of 100mm bore cast iron soil/ waste pipe alongwith fittings and accessoriesjointed in cement mortar and taking out from walls, floors or fromtrenches, if required complete all as specified and directed. |
| 140 | S&F PVC (SWR) pipe single socketed, any in length with rubber ring joints laid in trenches or in floors type \"B\" ISI marked of 110mm bore |
| 141 | M&L concrete bed to dain pipes 110mm to 175mm dia cement concrete 1:3:6, type C-2 including packing under, and haunching against the sides of pipes after they are laid and tested in all as specified |
| 142 | S&F 110 mm UPVC soil wastepipes single socketed (type B conforming to IS-13592) in any length with rubber ring joints on wallcomplete all as specified & directed. |
| 143 | S&F 110 mm UPVC soil wastepipes single socketed (type B conforming to IS-13592) in any length with rubber ring joints laid in trenches or floors complete all as specified & directed. |
| 144 | S&F 75mm UPVC soil waste pipes single socketed (type B conforming to IS-13592) in any length with rubber ring joints laid in trenches orfloors complete all as specified & directed. |
| 145 | S&F 75mm UPVC soil and waste pipes single socketed (typeB conforming to IS-13592) in any length with rubber ring joints fixed to wallls complete all as specified & directed. |
| 146 | S&F 110 mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as specified and directed. |
| 147 | S&F 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 148 | S&F 75mm dia PVC (SWR) junction single (Single Tee with access door)equal or unequal complete all as specified and directed. |
| 149 | S&F 75mm dia PVC (SWR)bends any radius complete all as specified and directed. |
| 150 | S&F 75mm PVC (SWR) vent cowl complete all as specified and directed. |
| 151 | S&F PVC (SWR) vent cowl 110mm |
| 152 | S&F in repair ,PVC (SWR) multifloor trap of125/110 mm setting and jointing with solvent including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) |
| 153 | S& F in repair PVC (SWR) gully traps of size 75/110 setting and jointing with solvent cement complete all as specified and directed. |
| 154 | M&L for Precast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc),chullah hoods, chajjas, water troughs,mangers, shelves and similar work including necessary form work and set in CM 1:6 complete all as specified and as directed. |
| 155 | Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 150mm dia set in cement mortar complete all as specified and directed. |
| 156 | Supply & laying DWC pipe (Double wall corrugated ) of class SN-4, IS-16098 (Part –II) of size internal dia of 150 mm, laid in trenches and jointed complete with coupler, bend, Tee, reducer etc complete all as specified & directed .Note :Earth work shall be measured and paid seperately |
| 157 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 158 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 159 | Taking down shutters of any description exc 1 sqm n not exc 2.00 |
| 160 | S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125 x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified. |
| 161 | S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105 x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified. |
| 162 | S & F for Solid wood grain printed PVC sheetdoor frame of size 50mm x 95mm made by joining 3nos. Heat bent PVC Sheet `C\" Channel of 5mm thickness of sizes 35mm x 30mm x 25mm & 40mm x 35mm x40mm & 25mm x 30mm x 35mm using solvent cement. The two side `C\" Channel shall be reinforced with M.S. tube of size 19mm x 19mm. All the three `C\" channel Shall be fixed to flat base of 5mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and joined by inserting 4nos. 150mm long brackets of 15x15mm M.S. Square tube inside the 19mm x 19mm square tubes & remain each of then with four screws as indicated in the drawing. |
| 163 | S&F for 35 mm thick Factory made solid EPS core PVC Moulded Door shutter, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design, consisting of frame made out ofMS tube 20 mm x 40 mm. The core panel shall consist of 25 mm thick high density EPS routed with design, sandwitched in between front side moulded prelam 2 mm thick Moulded PVC sheet on one face and 2 mm PVC sheet on other side. The shutter on all edges to be sealed with lipping of 10 mm (5mm x 2) thick x 25 mm wide PVC sheet on other side & 60 mmwide PVC sheet for lock lock rail side . the lipping shall be bonded to the 2 mm moulded / plain PVC sheet with solvant cement asas specified and shown on serial pages No. 142, 143, 144 , 145 & 146 of SSR 2010 (Part-II) and Particular specification & as directed by Engineer-in-charge.Note :- .(i) The PVC doors shall be fixed as per manufacturer\"s instructionsand as directed by Engineer-in-charge. |
| 164 | S&F for 30 mm thick Flush Shutters, Solid core construction, Single or double leaved rebating shall be square or splayed, with block board core and both face is covered plywood face panels free from twist or wrap in plane, complete all as specified and directed |
| 165 | M&L for decorative laminate type 1, 0.9 mm thick colour and pattern as approved fixed as in door shutters |
| 166 | S & F 35mm thick second class hardwood factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash barsany numbers ,fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Supply of glass/gauge shall be measured and paid for separately |
| 167 | Supply only stainless steel wire cloth, 0.63mm nominal dia of wire & average width of aperture 1.40mm & for wodden door shutters complete all as specified and directed. |
| 168 | Providing and Fixing of Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Handle, stay, 2nos of heavy duty stain less steel pivot hinges and 2 No\"s of Aluminium Powder Coated Tower Bolt shall be provided per shutter.Note:- Items included (i) 4mm thick Plain float glass.(ii) S.S.304 Grade Wire Mesh(iii) M.S Powder Coated 10mm Square guard bars with 6” (152.4mm) pitch |
| 169 | Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for louvered ventilators should be of 33 x 56 mm Box section and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/masonry wall by means of self expanding screwsrate also include for following items:-(i) 4mm thick Plain float glass(ii)M.S Powder Coated 10mm Square guard bars with 6” (152.4mm) pitch |
| 170 | Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron of approved colure) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021)(b) Vertical Members of shutter Section shall beof size 85.00 x 44.45 x 2.00 mm (Section No 19560)(c) Top Members of shutter Section shall beof size 83.50 x 44.45 x 2.00 mm (Section No 19581)(d) Lock rail (Middle member) of shutter Section shall beof size 150.00 x 44.45 x 3.00 mm (Section No 19596)(e) Bottom Members of shutter Section shall beof size 150.00 x 44.45 x 3.10 mm(Section No 19584)(f) Glazing clip for securing glass of shutters shall beof 0.80 mm thick (Section No 19370).Note:-(i) Section No given above are of make Jindal, contractor may use similar section of Make Hindalco / Nalco (ii) Floor door spring & lock will be measured & paid separately. |
| 171 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 172 | S&F mild steel body mortice lock 4 levers vertical type complete all as specified. |
| 173 | S &F Framed work such as door frame, grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks with Angle, MS sheet Flat iron & similar work conforming to Fe 290 GDE -E-165complete all as specified and directed. |
| 174 | S & F MS butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed. |
| 175 | S & F 250 mm long SS sliding door bolt with hasp, staple (bolt type) not less than 12 mm dia with & minimum of 6 bolts & nuts , 4 on bolt plate & 2 on staple plate complete all as specified and directed. |
| 176 | S & F 125mm long aluminium handles, cast type anodised complete |
| 177 | S&F 300 mmAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 178 | S & F in SS mortice lock with handle 125 mm complete all as per specified. |
| 179 | S & F 150mm size SS handles, cast moulded type fixed with screws complete all as specified and directed. |
| 180 | S & F SS barrel tower bolts not less than 12 mm dia of extruded section, 200mm long complete all as specified and directed. |
| 181 | S & F 75 mm long door stopper of stainless steel body with two number rubber shoes complete all as specified and directed. |
| 182 | S & F MS Helical door spring150mm longincluding roller and roller plate complete fixed to angle iron chowkats. as directed and specified. |
| 183 | S&F in repair 25 mm dia SS drapery rod grade 304 medium weightall as specified and as directed. |
| 184 | S&F SS -304 grade brackets/ end brackets for holding drapery rod all as specified and as directed. |
| 185 | S&F SS Finials suitable for 25mm dia SS 304 grade drapery rod as approved complete all as specified and directed. |
| 186 | M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (Ist quality) over and including one coat of pink primer complete all as specified and directed. |
| 187 | Hacking out old broken glass (any thickness, size, quality or description) from metal/aluminum frame including punching or drilling out old glazing pin/spring/ clip complete |
| 188 | S&F sheet glass 3.00mm thick ordinary quality and glazing with silicon and putty in steel window andbeads fixed with metal panel pin for wooden in square n.exc 0.5 Sqm each . |
| 189 | Demolition of reinforced cement concrete reinforced roofs, floors (Other than ground floors), beams, staircases, landing, chajjas, slab & similar suspended work complete all as specified and directed incl removal all rubbish material outside of MoD Land |
| 190 | Taking down & chipping the RCC surface and cleaning the rusted reinforcement and exposed surface by wire brush, mechanical device or any other established method and applying the rust removing solution of approved make and quality with cotton swab to reinforcement and allowing to dry the same for 24 hrs complete all as directed. |
| 191 | M & L for 30mm thick polymer mortar to load carrying RCC members in two layers in proportion of 1:5:15 by weight of polymer of approved make and quality, cement and quartz sand with required WC ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufacturer specification etc. complete all as directed and specified. |
| 192 | M&L Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 193 | All as per Item No 195 but 10 mm dia & over complete all as specified and directed . |
| 194 | Use & Waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvves including sup-ports, overhangs, etc. also splays between floors and beams, etc finish withrough finish flat surface. |
| 195 | Use & Wasteform work to chullah hoods, chajjas, troughs and similar items including edges finish withrough finish flat surface. |
| 196 | M&L for nominal mix RCC 1:1.5:3 Type A1(using 20 mm graded stone aggregate) as in slabs supported on walls, lintel beam, beams & coloumns in floors , roofs, balconies, etc.complete all as specified & directed.Note :- Reinforcement shall be measured and paid for separately. |
| 197 | M&L for nominal mix RCC 1:1.5:3 Type A1(using 20 mm graded stone aggregate ) as in Chhaja, roof projections etc.complete all as specified & directed.Note :- Reinforcement shall be measured and paid for separately. |
| 198 | M&L providing cement concrete type B-1, 1:2:4 (using 20 mm graded aggregate) in lintels up to 1.5m clear span, cills, bed plates,coping,kerbswater trough & the like including weathering, slightly rounded or chamfered angles & throating complete as specified and directed |
| 199 | Schedule of Credit |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
