Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed. |
| 3 | Demolition of cement concrete (unreinforced)Roof , Floors (other than Ground floors), Beams, staircase, landing, chajjas and similar suspended work complete all as specified & directed. |
| 4 | Demolition of cement concrete (Re-inforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed. |
| 5 | M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing with neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified & directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the debris out of MOD premises complete all as specified and directed |
| 7 | Taking down cement plaster/wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints,hacking for key , scrubbing down with water etc complete all as specified and directed |
| 8 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed. |
| 9 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed. |
| 10 | Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed. |
| 11 | Taking down, easing and adjusting shutters of any description, exceeding. 1.00 Sqm and not exceeding 2.00 Sqm each and re-fixing in the sameor other opening complete all as specified and directed. |
| 12 | M&L for Brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified. |
| 13 | M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 but except bricks complete all as specified. |
| 14 | M&L for brickwork with Fly Ash Bricks (old size), in half-brick thick honey comb walling built in cement sand mortar 1:6 complete all as specified. |
| 15 | M&L for Brickwork with subclass \"B\" bricks, straight or curved on plan exceeding 6 metre mean radius for bricks or brick tiles only complete all as specified. |
| 16 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter Ioints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made on this account. |
| 17 | S&FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 X 125 MM comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 18 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ choowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: M.S. hold fast/ lugs fasteners shall be paid for separately). |
| 19 | S&F for Pressed steel frames of size 125mmx60mm of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including tarring/black bituminous paint to unexposed surface complete all as specified and directed.Note: PCC for filling of hollow portion shall be measured and paid separately. |
| 20 | S&F for Pressed steel frames of size 105mmx60mm of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including tarring/black bituminous paint to unexposed surface complete all as specified and directed.Note: PCC for filling of hollow portion shall be measured and paid separately. |
| 21 | M&L Cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in filling of pressed steel door frames/chowkhats complete all as specified |
| 22 | Providing and fixing 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shuttercomprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 23 | S & FFactory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges and necessary S S `screws shall be paid separately |
| 24 | Supply & fixing 35mm thick, 2ndclass hard wood, glazed and skeleton shutters,open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I for door shutters, complete all as specified. |
| 25 | Supply & fixing 35mm thick factory made 2nd class hard wood (Sal/Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I) (larger size to be provided), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified. |
| 26 | S&F in repair factory made 25mm (+ 0.7mm) thick WPC cupboard shutter/ Shelf / partition,, prelaminated one side with coating of ultra voilet chemical, glossy/mat finish incl. 100% termite/water proof, fire retardant, Eco friendly, density not less than 600Kg/cum finish at all edges for making edges lipping/bending, complete as per direction of Engineer-in-Charge and manufacturer\"s specifications. |
| 27 | S&F for Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thickMS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fastsetc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including two coat of synthetic enamel paint over one coat of red oxide zinc primer, complete all as specified and directed by Engr-in-charge. |
| 28 | S & F 100mm size hasp and staple, aluminium anodisedsafety type, fixed with screws complete all as specified and directed. |
| 29 | S & Fcontinuous (piano) hinges, mild steel, bright finishwidth of flaps (when open ) 40 mm all as specified and directed. |
| 30 | S&Ffor Stainless steel designer handle (heavy duty) of 100mm size, fixed to drawers or cupboard shutters, complete all as specified & directed. |
| 31 | M & L for Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed |
| 32 | S&F for Butt hinges 100 mm long, stainless steel, medium weight with SS hinges pin and fixed complete all as specified. |
| 33 | S &F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded setion or cast aluminium alloy and fixed 300 mm long complete all as specified & directed. |
| 34 | S & F anodised aluminium barral tower bolt extruded section 200 mm size complete all as specified & directed. |
| 35 | S & F anodised aluminium handle cast type 125 mm size complete all as specified & directed. |
| 36 | S&F rubber lining fitted with aluminium powder coated strip, 100mm wide for door cill complete all as specified and directed. |
| 37 | S&F for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 38 | S&F for Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door framecomplete all as specified and directed. |
| 39 | S&Fstainless steel peg set of six of size 400mmx30mmx3mm size fitted with machine screw and wooden and plastic cleats (minimum wt 190gms)complete all as specified and directed. |
| 40 | S & F Stainless Steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples complete all as specified. |
| 41 | S & F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane complete in all respect as specified and directed. |
| 42 | M&L for stainlesssteel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed in repair with statinless steel wire staples. |
| 43 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spribng clips and providing and fixing new ones exc 1.5 Sqm complete all as specified and directed |
| 44 | S&F \"as in repair\" 25mm outer dia stainless steel decorative drapery rod of thickness 20 guagewith stainless steel brackets near to ends with stainless steel finialswith adopter for 25 mm dia drapery rod at both ends complete all as specified and directed. |
| 45 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 46 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing ,etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified. |
| 47 | S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceilingcomplete all as specified. |
| 48 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 49 | S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified. |
| 50 | Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified & directed |
| 51 | S&F for GIpipe 32 mm dia light grade in short length as spout pipe in sunken floor slab laid in slope to brick wall with PCC 1: 2:4 TYPE B -1completeall as specified and directed. |
| 52 | S & F in repair Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including dismantling of old broken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 53 | S&F Stop valve 15mm bore concealed type cast copper alloy (ISI Marked) cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed down for iron/PVC pipe or for brass ferrule and fixed complete all as specified and directed. |
| 54 | S&Fin repairBib taps for 15 mm bore pipe, Brass CP, fancy type (long shank) with crutch or butterfly handle screwed down for iron/PVC pipe or for brass ferrule and fixed complete all as specified and directed. |
| 55 | S&F Stop valve /Angle Valve (ISI Marked)15mm bore fancy type, chromium platedwith long shank and cup screwed down, high pressure with crutch or butterfly handle screwed down for iron/PVC pipe or for brass ferrule and fixed complete all as specified and directed. |
| 56 | Supply & fixed CP Brass shower rose 200x200 mm size with with flexible brass arm 450-550mm long for 5 mm bore pipecomplete all as specified and directed. |
| 57 | S&F in repairs CP soap dish cantabile-clea (material SS finish, glossy) fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 58 | Supply & fixed in repair, Vitreous china squatting pan of pattern, long pan, \"Orissa pattern\", size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision concrete bedding CI floor trap etc complete all as specified and directed. |
| 59 | Supply & fixed in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 60 | S&Fin repairs 250mm dia towel Ring round with round flange ofbrass chromium plated including brackets. complete all as specified and as directed. |
| 61 | S&F in repair corner glass corner shelf quarter round with CP Brass Bracket, complete all as specified and directed. |
| 62 | S & F in repair 15 mm fancyPillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down highpressure, with or without lettered\"Hot\" or \"Cold\" withlong screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and directed. |
| 63 | Supply & fixed in repair Push button type dual flush type PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and push botton (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres complete all as specified and directed. |
| 64 | Supply and fixing sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mmand bowl size 400mmx300mmx 180mm complete all as specified and directed. |
| 65 | S&F for wall mount Stainless Steel plate rack (ISI Marked) of min. dimension 760 x 250 x 760 mm and weight not less than 11 kg completeall as specified and directed. |
| 66 | Supply & fixed in repair, Vitreous china wash basin, white flat back, size 550 x 400 mm excl taps, wastechain and plug and porcelain stopper but incl brackets complete all as specified and directed |
| 67 | S & F corrugated waste pipe, 32 mm dia, suitable for WHBs/sinks/Urinal, including threaded PVC socket suitable for shank of waste coupling complete all as specified. |
| 68 | S & F CP Tubular towel rail, 20mm dia, D type, 60cm long between flangesin complete all as specified and directed. |
| 69 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed |
| 70 | M&L PVC (SWR) floor trap, dia of outlet in 75 mm, plain excludinggrating, but including jointing with solvent cement fixed in repaircomplete all as specified and directed. |
| 71 | Supply & fixed PVC grating square, 150 mm (Hinge pattern and with or without hole) complete all as specified and directed. |
| 72 | Supply & fixed110 mmbore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenchwith suitable clampcomplete all as specified and directed. |
| 73 | S&F PVC (SWR) bend any radius 110mm dia bore complete all as specified and directed. |
| 74 | Supply & fixed, 75 mm bore PVC (SWR) vent cowlcomplete all as specified and directed. |
| 75 | Supply & fixed in repair, 75 mmbore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls/ laid in trenches or in floorcomplete all as specified and directed. |
| 76 | Supply & fixed , 75 mm bore PVC (SWR) bends any radius, with or without excess doorcomplete all as specified and directed. |
| 77 | M&L for Non skid ceramic jointless coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed . |
| 78 | M&L for non skid ceramic jointless coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in skirting etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar 1:4, complete all as specified and directed . |
| 79 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) in floor etc area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqm, set and Iointed in neat cement slurryand pointed in white or coloured cement to match over and incl 15mm thk screed bed in CM 1:6all as spd and directed. |
| 80 | M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and Iointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed. |
| 81 | M&L for 25 mm thick (average thickness) PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor by maintaing required gradient/undulation, finished rough.complete all as specified and directed |
| 82 | M&L Marble work Udaipur green 16mm to 18mm thick (table rubbed and polished)as in cooking platforms, treads, riser or landing of stair hall, window cill and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black incl cutting of 25 mm dia hole for gas pipe and incl rounding to edges complete all as specified and directed. |
| 83 | M&L for Machine cut kota stone slab flooring 18 to 20 mm thick over cement screed base laid and Iointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeIointed in neat cement slurry and pointed in white or coloured cement to match over and incl rendering 10mm thick in CM (1:4) on brick or concrete surface complete allas specified & directed. |
| 84 | M&L for machine cut Kota stone slab not less than 16mm thick as in riser of steps, skirting, dado and pillar laid over& including 10 mm thick screed base in CM 1:4 and Iointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified. |
| 85 | M&L for coloured machine pressed precast rubber moulded concrete interlocking red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50mm thick sand filling under paver, properly levelled etc, including taking out existing interlocking paver block complete all as specified and directed. |
| 86 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded agg) as in Sub-base to floor finishes complete all as specified and directed. |
| 87 | Rendering 05 mm thick plaster in cement mortar 1: 3 on concrete surfaces as in ceilingsfinished even and smooth without using extra cement, complete all as specified. |
| 88 | Rendering 10 mm thick on fair face of brick work or concrete surface in CM 1:6,finished even and smooth without using extra cement complete all as specified and directed. |
| 89 | M&L for 12mm thick rendering in two layers on fair faces brick work and concrete surfaces of wall in CM 1:4, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, complete all as specified and directed. |
| 90 | Taking down cement plaster and decayed concrete of any description, upto tripple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar1 :3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3, complete all as specified and directed. |
| 91 | M&L Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making Ioints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified |
| 92 | Preparation of newly plastered surface of wall and applying two coats of oil bound distemper, white or tinted shade with and including priming surface with chalk whitening and 1mm thick putty, complete all as specified and directed. |
| 93 | Complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper, white or tinted shade with and includingpriming surface with chalk whitening , and 1mm thick putty, complete all as specified. |
| 94 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl complete removal of existing treatment surfaces incl 1 mm thick wall putty over old or new plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 95 | M&L for preparing newly plastered surfaces and applying three coats of white wash as in ceiling etc complete all as specified and directed. |
| 96 | M&L Preparation of new steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shadeover one coat of red oxide primer not otherwise described complete all as specified and as directed by the Engineer-in-charge. |
| 97 | M&L preparation of old steel surfaces of anydescription, not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint , white or tinted complete all as specified. |
| 98 | M&L prepration of new or previously untreatedwooden surfaces of anydescription, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint, over a coat of pink primer complete all as specified. |
| 99 | M&L prepration of old wooden surfaces of anydescription, not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified. |
| 100 | M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching,floor by maintaing required gradient/undulation and including roof beam etc slightly rounded or chamferred angles and throating, complete all as specified and directed |
| 101 | M&L for reinforced cement concrete type B01:2:4 nominal mix (using 12.5 mm graded crushed stone aggregates) in slabs supported on walls beams, columns in floors, roof, landings balconies, canopies deck slab and in shelves etc complete all as specified and directed. |
| 102 | M&L for Providing precast cement concrete 1:2:4, type B1(using 20 mm graded crushed stone aggregate) set in CM 1:6, as in cover slabs for wash basin plateformetc with plain fair faces casted in angle iron frame(Angle iron frame measured and paid separetaly)complete all as specified and directed |
| 103 | M&L TMT steel bars 6 to 8mm dia, cut to length bent to shape required including cranking bending etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed |
| 104 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed. |
| 105 | M & L 15 mm thick plaster in CM 1:4 with intergral water proofing compound and applying 75 mm thick padding and junction coved filling of PCC M-20 Nominal Mix (1:1.5:3) of 12.50mm Agg on the junction offloor and wall the surface shall than he cured and allowed to dry. Apply Epoxy Resins Coating, polymer Modified Cementation coating like brush bond of frsroc,pedilite and bostic as per manufactures instruction both on floor as well as on wall complete all as specified and directed by Engr in Charge |
| 106 | Supply only liquid water proofing compoundcomplete all as specified and directed. |
| 107 | M&L for Cement concrete 1:5:10 type D-2 (using 40mm graded crushed stone aggregate)as in mass filling in sunken slab of toilets, complete all as specified. |
| 108 | Cleaning/clearing of sewage line (including manholes) 100mm to 150mm bore of any description, underground at any depth ,removing any type of blockage including desilting, descaling & dechockingof drains as well as manholes and depositing the sludge in a pit (including digging of pit) not less than 100 metres away from the site of cleaning and covering the sludge with layer of 2.5cm thick layer of earth and spraying unslacked lime on the pit and make line smooth functional all as specified and directed. |
| 109 | Taking down existing roof treatment of any description incl mud phuksha or PCC padding if any (any no of layers) including removal to debries in low laying area exc 1.00 KM but n exc 2.00 KM complete all as directed. |
| 110 | S & F of Wire netting of stainless steel wire 0.71 mm dia wit size of mesh 25mm fixed with tinned tacks of stainless steel wire staplescomplete all as specified and directed. |
| 111 | M&L cement concrete 1:1.5:3 type B-0 (using 12.50 mm graded stone aggregate) leveling course on existingroof , rounded and chamfered on edges, with Wpc @200ml/ bag of cement complete all as spd and directed |
| 112 | M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning the top surface of RCC roofing properly with water complete.(b) Applying Oil bound bitumen primer @ 0.30 litre/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on prepared surface.(c) Laying of membrane not less than 3.0 mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10 Cm side laps and 15 Cm end lap complete. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.(e)Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg /Sqm as prescribed by manufacture of membrane.(f)APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC (1:2:4) type B-0complete. |
| 113 | M&L for providing and injecting chemical emulsion for post termite treatmentalong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 114 | M&L for providing and injecting chemical emulsion for termite treatment of soil under existing floors usingemulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 115 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceilling roses , holder , tube light , bulk head , pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good surfaces , wall, floors etc.) |
| 116 | M& L in replacement of Point wiring for one light point / fan point or bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed, FRLS, Multistranded copper conductor cable as in and including non metallic rigid PVC concealed conduit ISI marked, not less than 20mm dia, medium duty for one light, fan, bell point controlled by one switch includingsunken steel boxes of suitable size with 3mm thick plastic laminated bakelite sheet including FRLS PVC insulated unsheathed multistranded copper conductor cable of size 1.5sqmm (green colour ) as continious earth wire and connecting to earth dolly, and making good to disturbed surfaces of wall/floor to match to existing finishes etc complete all as specified and directed. Note: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces. |
| 117 | M&L in replacement of Point wiring for one 2 way light point/ fan point/ bell point etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm (red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate sizenot less than 20mm dia,and with sunk cast ironfor mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified. |
| 118 | M&L in replacement of Point wiring for one socket outlet 5 Amp 3/5 pinfor independent board etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate sizenot less than 20mm dia,and with sunk cast ironfor mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified. |
| 119 | All as per Sl item No 116 here in above but for one 3/5 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed. |
| 120 | All as per Srl item No. 116 here-in-above but for one 15 Amp independant socket outlet pointusing 2.5 Sqmm FRLS PVC insulated unsheathedmulti-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked)not less than 20mm dia,medium duty including sunken steel boxex of suitable size with 3mm thick plastic laminated bakelite sheet incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 2.5 Sqmm (green colour) earth wire connecting to earth dolly . |
| 121 | All as per Srl item No.116 here-in-above but for metal plug top of Geyser pointusing 4.0 Sqmm FRLS PVC insulated unsheathedmulti-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked)not less than 20mm dia, incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 4.0 Sqmm (green colour) earth wire connecting to earth dolly . |
| 122 | M & L for Switch pianoflush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed. |
| 123 | M&L for two way switchpiano, flush button, single pole two way 6 amps 240 Volt with polycarbonate body complete all as specified and directed. |
| 124 | M&L for Bell push switchpiano flush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed. |
| 125 | S&F for multi socket outlet for 2&3 pin, 6A, flush type complete all as specified and directed. |
| 126 | S&F for socket outlet 2 in 1, 5 pin, 6 and 16 Amps, flush type, single pole, oneway,230Volts complete all as specified and directed. |
| 127 | S&F for switch piano, flush type, single pole, oneway, 16 Amps 230Volts complete all as specified and directed. |
| 128 | S&F for stepped type electronic mini /delux fan regulator 100 watt rotary step all as specified and directed. |
| 129 | S&F ceiling rose, surface bakelite, 2 to 3 terminals, 3 phase PVC / polycarbonate, isolated body complete all as specified and directed. |
| 130 | S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 131 | S&F in repairs LED Lamp of 9W, Base B-22, holder base with polycarbonate body and aluminium heat sink warm whitecomplete all as specified and directed. |
| 132 | Supply & fix in repairs LED tube light fittings (4 feet long), wall mounted 1x20 watt6500K, Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientwith all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed. |
| 133 | S&F in repairs LED Bulk Head luminaries, 10W complete with all accessories and including connector andconnecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and directed. |
| 134 | S&F in repairs decorative wall light white in colour made up of poly carbonate including 9 watt retrofit LED Lamp complete all as specified and directed. |
| 135 | S&F in repairs building security LED lightluminaire 30 W, IP 66, IK-07, AC 230 volts, made up of pressure di-cast iron housing complete making connectionusing PVC insulated and sheathed3 core multi stranded copper conductorcable of size 0.50 Sqmm from ceiling rose including MS bracket made of 25/32mm GI pipe bent to shape, fixed to wall with clamps and nurs & bolts for mounting fittings complete all as specified and directed. |
| 136 | M&L of Bell, Ding Dong AC. 230 volts, single pole all as specified. |
| 137 | S&F in repairs sheet metal enclosure,single pole and neutral 240 volt, 20/32 Amps with two pin and earth plug and socket plug top complete with single pole MCB complete all as specified and directed. |
| 138 | S&F in repairs sheet metal enclosure for DBs double door single pole and neutral with 200 amps rated bus bar 12way, 240 volts complete all as specified and directed. |
| 139 | S&F in repairs MCB single pole and neutral, 63 Amps, 240 volts, B-series complete all as specified and directed. |
| 140 | S&F in repairs MCB single pole 06 to 32 Amps, 240 volts, B-series complete all as specified and directed. |
| 141 | M&L for Earthing complete with galvanised steel earth plate electrode 600mmx600mm thickness not less than 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electric plate No 3connected to earth test point/MCB DBs all as specified and indicated complete with funnel, charcoal, dust, salt etc and GI protection pipe, medium grade 15mm bore and GI watering pipe 20mm bore light grade, 40mm thick precast RCC M-15 (nomial mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover, PCC M-15 (Nominal mix) pit, excavation and earth work in any type of soil and connected, complete all as specified & directed. Note:- 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in the unit rate quoted by the contractor.2. Soil should be free fromstone, boulders, aggregate, gravels etc |
| 142 | M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, FRLS PVC sheathed two run (as phase and neutral) and run 6.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in rigid non metalic PVC conduit complete all as specified and directed by Engr-in-charge.(Note:- The rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter andmaking good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete). |
| 143 | S&F as in repairs prewired VTPN Distribution board of size not less than 750mmx470mm with provision for & including MCCB as incommer 63 Amp, 04 pole IP 54, 04 way (for incomming MCCB & outgoing MCBs), with copper busbar for each phase, withNeutral bar,Earth bar and cable ties for cable managemet, fully insulated busbar & shrouded Neutral bars, with 63 Amps MCCB, 16 KA, 4 pole, as incomer and SP MCB\"s of capacity 6-32amps as outgoing complete all as specified and as directed. Note: Cost of MCCBs and MCBs, cutting chases, grouting in wall shall be deemed included in unit quoted rate of this item. |
| 144 | Taking down existing Ceiling Fans by disconnecting from ceiling rose, dismantling blades & hanging ceiling fan back after repair including refixing of blades, making of electric connections complete all as specified and as directed by Engr-in-Charge. |
| 145 | Taking downCeiling fan of capacity 1200/1400rpm, dismantling, cleaning/checking, greasing/oiling of bush and bearings, replacement of defective parts viz, set of split pins, cotter pins, blade screws, canopy screws of suitable size including replacement of PVC fan box round sheet as required on site complete all as specified and directed.(Note: Rewinding and unserviceable parts other than specified in this items if any will be measured separately) |
| 146 | M&L for dismantling and taking out burnt winding by cutting, cleaning slouts and re-winding of ceiling fan motor 1400/1200 mm sweep any type with super enameled heat resistant copper winding wire of gauge 35/36 SWG including, sleeve work, varnishing with 1st class insulation, greasing, threading, lathe work, connection with flexible wire 0.472 mm copper wire upto connector block and reassembling and testing for 4 Hrs after repair complete all as specified and directed. -(i) Fan shall be collected by the contractor from concened unit at their own arrangement.(ii) Motor shall be wound with machine only and repair of fan shall be undertaken inside complex / office of GE (S) Mamun. (iii) Super enameled copper winding wire of Khaitan/RPG/KEI or equivallent make shall only be used (iv) Total weight of winding wire should not be less than 200 gm per fan. |
| 147 | Supply only gun metal bush of ceiling fan of size 1200/1400mm sweep as per esixting size, complete all as specified and directed. |
| 148 | Supply only capacitor AC 440volts 2.5 mfd with copper wire terminal including PVC clamp oil filed is marked complete all as specified and directed. |
| 149 | Supply only ball bearing suitable for ceiling fan/exhaust fan/wall/pedestal fan any type complete all as specified and directed |
| 150 | Supply only shackle assy kit (rubber real-01, MS split clamp two Nos, nuts and bolts washers 2 Nos & split pin-02 Nos) suitable for any type of ceiling fan complete all as specified and directed. |
| 151 | Supply only ceiling fan blades made of MS sheet duly powder coated of thickness not less than 1.00mm suitable for 1400/1200mmcomplete all as specified and as directed by Engr-in-Charge. |
| 152 | Supply only down rod made of MS pipe Medium Grade 15mm dia of ceiling fan duly spray painted complete with split pin, hanging clamp complete all as specified and directed. |
| 153 | Supply only superior quality PVC canopy top & bottom of ceiling fan as per existing size & shape complete all as specified |
| 154 | M&L for removing old paint of ceiling fan 1200-1400mm sweep by scraping with sand paper including preparation of surfaces by cleaning, removing oil/grease etc. filling cavities with filter and applying two coats of heat resistant high quality synthetic enamel paint at workshop by spray painting including writing MES No all as specified and directed Note:- Paint quality and colour shall be got approved from Engr-in-charge. |
| 155 | Supply and fixing in repairs cable PVC insulated and overall sheathed with flexible copper conductor 3 core of size 0.5 sqmm complete all as specified and directed. |
| 156 | S&F in repairs sheet moulded compound (SMC) meter box fire retardant type of size not less than 600mmx500mmx150mm to enclose 04 nos single phase electric meters with hinged type front operated door having transparent acrylic sheet and proper locking arrangement and flush mounting in wall including refixing the serviceable electric meters, dismantling and making electrical connections including cleaning of disturbed areas and making good the disturbed surface and matching with existing surface complete all as directed. Note: Rate quoted shall deemed to be in unit quoted rate of the item included taking down existing electric meter and refixed in new meter box with proper electrical connection. |
| 157 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all as specified and directed. |
| 158 | Returning filling in (soil) including spreading , levelling ,watering and well ramming in layers not exceeding 25cm thick all as specified and directed. |
| 159 | Removing exacavated materials (soil) to a distance not exceeding 50m away from the starting pointand dipositing where directed at a level not exceeding 1.5m above all as specifiedand directed. |
| 160 | M& L for sand cushioning to the under ground cable complete all as per SSR Part - I clause 19.75 all as specified and directed. |
| 161 | Material and labour for brick protection with sub class B bricks using old size bricks, laid dry, flat over cable, longer length of brick laid perpandicular to the cable in trenches all as directed. |
| 162 | M &L ofXLPE insulated, armoured, heavy dutyelectric cable with aluminium conductor 1100volts grade, cross section area 25 sqmm 4 core complete all as specified and directed. |
| 163 | M &L ofXLPE insulated, armoured, heavy dutyelectric cable with aluminium conductor 1100volts grade, cross section area 16 sqmm 2 core complete all as specified and directed. |
| 164 | S&Fforgalvanised iron tubing light grade size 40 mm dia for protection of cables with all fitting and fixed complete to pole or laid in ground complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
