Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 2 | Demolition of RCC of any description and in any position not otherwise specifically provided for complete |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing)and removing rubbish off the premises complete all as specified and directed. |
| 5 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base flooring 100 mm thick complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even andrough to receive the topping layer complete all as specified and directed. |
| 7 | M&L for10 mm thick Double Charged Light shade vitrified ceramic tiles in floors,tiles size 600 mm x 1200 mmset & jointed in neat cement slurry and pointed in coloured cement to match as in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | M&L for10 mm thick Double Charged Light shade vitrified ceramic tileson vertical surface of wall of size 600mm x 1200mm as in dado/skitting including 10 mm thick renderingin CM 1:4 complete all as specified and directed |
| 9 | M&L for anti non skid ceramic coloured tiles of design as approved by GE 10 mm thick (square) area of each tile size 600mm x 600 mm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 20 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 10 | M&Lfor glazed ceramic coloured tiles size 600mm x 450mm x 10 mm thick on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 11 | M&L for Post construction Anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2to match the existing floors complete all as specified and directed. |
| 12 | M&L for Treatment of soil using emulsion for Post construction Anti termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed. |
| 13 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate, 50mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection. |
| 14 | Dismantiling and removing sunken slab filling of brick bats/cinder/light weight concrete including plastering on sunken floor/sides of floor slab/tiles of toilets in all the floors including all the water and sanitary fixtures and removing all rubbish/debris outside MoD land as per instruction complete all as specifiedand directed. |
| 15 | M&L for the suken floor RCC slab including sides to the full extent of sunken portion in upper floor shall be prepared and plastered with 15 mm thick cement plaster in CM 1:3 with water proofing compound as per manufacturer\"sinstructions and finished even and smooth without using extra cement. When the plaster is cured and dried up, apply a uniform coat of blown grade bitumen 85/25 @ 1.2 kg/Sqm confirming to IS 702 over a coat of primer @ 0.70 Kg.Sqm over plastered surface and also including Supply only of admixture fosroc SP 430 ,Dr fixit Chemical all as specified and as directed by the Engineer-in-Charge complete all as specified and as directed. |
| 16 | Water proofing treatment to Sunken floor slabe complete as specified bellow and as directed.(a) Provide and lay 4mm thick APP modified torch applied prefabricated five layer water proofing membrane weight not less than 3.60 Kg/Sqm.(b) Apply a uniform coat of blown grade bitumen 85/25 @ 1.2 Kg/Sqm confirming to IS 702 of the surface area complete all as specified. |
| 17 | M&L for PCC lean concrete 1:5:10 type E2 laid in layers of not more than 100 mm thick tamping etc complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L for 40mm thick PCC 1:2:4 type B0 (12.5 mm graded ) stone aggregate as padding concreteetc over lean concrete , complete all as specified and directed. |
| 19 | Dismantling of brick work built in cement mortar including all quions, arches, pillars etc , complete all as specified and directed. |
| 20 | M&L Brick work with Fly Ash bricks straight or curved on plan exc 6m mean radius built in CM (1:6) , complete all as specified and directed. |
| 21 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 22 | M&L for rendering5 mm thick in cement mortar 1:3 as in ceiling and finished even and smooth without using extra cementcomplete all as specified and as directed. |
| 23 | M&L for rendering10 mm thick in cement mortar 1:6 on walls and finished even and smooth without using extra cementcomplete all as specified and as directed. |
| 24 | M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth using extra cement incl Integral Waterproofing Compound (0.2 % or 100 ml per bag of cement) complete all as specified and directed. |
| 25 | M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered wall surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 26 | M&L for preparation of newly plastered surfaces ofwalls andapplying two coats ofdistemper-oil-emulsion over a coat of primer complete all as specified and as directed. |
| 27 | M&L for preparation of newly plastered surfaces ofceiling andapplying two coats ofdistemper-oil-emulsion over a coat of primercomplete all as specified and as directed. |
| 28 | M&L for Complete removal of existing treatmentand applying two coats of OBD over a coat of alkali resistant primer on wall complete all as directed by Engineer-in-Charge. |
| 29 | M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/ old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed. |
| 30 | M&L for applying two coats of oil bound distemper on Ceiling surfaces over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 31 | M&L for applying 2mm thick Birla / JK Putty in two layers on old wall and ceilingsurfaces/external surfaces/internal surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper , complete all as specified and directed. |
| 32 | Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store for 15mm bore of pipe complete all as specified and directed. |
| 33 | Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 20mm bore of pipe complete all as specified and directed. |
| 34 | Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 25mm bore of pipe complete all as specified and directed. |
| 35 | Supplying and laying of 15mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings,fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed. |
| 36 | Supplying and laying of 20mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings,fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed. |
| 37 | Supplying and laying of25mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed. |
| 38 | Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth , complete all as specified and directed. |
| 39 | S&F CPVC Brass Elbow 15mm bore dia complete all as specified and directed |
| 40 | S&F CPVC Brass Elbow 20mm bore dia complete all as specified and directed |
| 41 | S&F CPVC Brass Elbow 25mm bore dia complete all as specified and directed |
| 42 | S&F CPVC Brass Tee 15mm bore dia complete all as specified and directed. |
| 43 | S&F CPVC Brass Tee 20mm bore dia complete all as specified and directed. |
| 44 | S&F CPVC Brass Tee 25mm bore dia complete all as specified and directed. |
| 45 | S&F CPVC Brass Union 15mm outer dia complete all as specified and directed. |
| 46 | S&F CPVC Brass Union 20mm outer dia complete all as specified and directed. |
| 47 | S&F CPVC Brass Union 25mm outer dia complete all as specified and directed. |
| 48 | S&F CPVC Brass Elbow (20/15) 20 mm bore dia complete all as specified and directed. |
| 49 | Dismantling PVC water tanks exc 500 ltr but not exc 1000 ltr capacity and removing to store complete all as specified and directed. |
| 50 | S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified complete |
| 51 | S&F for 25mm dia Stainless Steel Curtain Rod complete all as specified and directed |
| 52 | S&F fancy type heavy duty easy-to-fit wall-to-bracket holder forfor 25mm dia stainless steel curtain rod, as per site requuirement approved by Engr-in-Charge complete all as specified and directed |
| 53 | S&F in repair bib tap cast copper alloy chromium plated with quarter turn fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed. |
| 54 | S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure withwith quarter turnscrewed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F in repair 20 mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed. |
| 56 | S & F in repairs 20 mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed. |
| 57 | S & F in repairs 25 mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed. |
| 58 | S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed. |
| 59 | S&F in repair chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete. |
| 60 | S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed by Engineer-in-charge. |
| 61 | S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long completeall as specified and directed. |
| 62 | S & F in repair 450mm long Stainless steel six peg hanger chromium plated as approved by Engrin -charge complete all as specified and directed |
| 63 | S & F in repairs C P Towel ring not less than 250mm dia, fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed |
| 64 | S & F in repairs tie hangers, fixed with and including chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed |
| 65 | S & F in repairs glass brush stand size 150mm x1500mm, fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed |
| 66 | S & F in repairs Tubular Towel Rail 20mm dia. \"D\" type, 600mm long of CP fixed with and including brass Chromimum plated brass screws and wooden/plastic cleat as specified |
| 67 | S & F PVC bath cabinet with looking mirror overall size350X450mm all as specified and as approved fixed to wall , complete all as specified and directed. |
| 68 | S&F Bottle trap chromium plated for WHB as per approved quality , complete all as specified and directed. |
| 69 | S&F WHB under counter-type of size 560x430x195mm oval shape including coupling , complete all as specified and directed. |
| 70 | S&F CP Grating 75 mm dia fixed with white cement complete all as specified and directed. |
| 71 | S & F in repair PVC Grating doom 125 mm dia with waste hole of PTMT (minimum weight 40gms) complete all as specified and directed. |
| 72 | S & F CP brass center hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for CPVC 15 mm bore pipe size complete all as specified and directed. |
| 73 | S&F stainless steel silver EWC toilet jet spray faucet for bath fittings complete all as specified and directed |
| 74 | S&Fin repair CP two way angle valvewith wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule , complete all as specified and directed. |
| 75 | S&F in repair of stainless steel soap dish, of standard size and shape , complete all as specified and directed. |
| 76 | S & F in repair Toilet paper holder, C P box type complete all as specified and directed |
| 77 | S & F in repairs,vitreous china wash down water closet pan (pedestal pattern), white, incl \"P\" or \"S\" trap and plastic water closet seat cover, white, closed pattern with flat bottom and cover & MS chromium plated or aluminised hinging device, complete all as directed by Engr-in-Charge. |
| 78 | S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with inlet, ball valve, float and handleinternal fitting, push button operated type with and including brackets etc complete. |
| 79 | S & F in repairs hand shower (Health facut) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as directed. |
| 80 | M&L 32mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed. |
| 81 | Taking down AC/PVCpipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of any dia pipes. |
| 82 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. |
| 83 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete. |
| 84 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. |
| 85 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. |
| 86 | S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 75 mm PVC pipe complete all as specified and directed. |
| 87 | S&Fstack clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipecomplete. |
| 88 | M/L PVC(SWR) bend of110mm dia of any radius etc complete all as specified and directed |
| 89 | S&F PVC (SWR) bends any radius provided with access door of 110 mm dia |
| 90 | M/L PVC(SWR) Tee of110mm dia etc complete. |
| 91 | S&F PVC (SWR) bends any radiusprovided with access door of 75 mm dia |
| 92 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door |
| 93 | Ditto all as per above item No. but 75 mm bore |
| 94 | S&F PVC (SWR) vent cowl 110mm bore |
| 95 | S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete |
| 96 | S&F PVC (SWR) \"P\" trap for 110 mm dia etc complete. |
| 97 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed. |
| 98 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed. |
| 99 | S&F steel work in tubular poles & trusses (framed) including purlins,rafters and special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade St-240 complete all as specified and as directed by Engineer-in-Charge. |
| 100 | Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to or from store complete all as specified and directed |
| 101 | Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to or from store complete all as specified and directed |
| 102 | Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension,including Pinhead Glass with thickness of 4mm required for fixing & louvers strips, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance inimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 103 | Supply and fixing factory made UPVC white colour Three track three panelssliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. andprovided with Clear of Saint Gobain / Modiguard make with thickness of 4mm and stainless steel wire cloth of 0.19mm nominal dia. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 104 | S&F Solid WPC frame (Single Rebated) of approved colour of size 50mm x 75mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheetmetal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be waterproof, termite proof, elegant and should have excellent screws holdingstrength to fix hinges and hold doors properly for a long life) complete all as specified . |
| 105 | S&FFactory Made 24 mm thick 100% Solid WPC ( Wood polymer Composite ) LaminatedFlush door Shutter of required size and colour(one side decorativeother side plain )comprising of virgin PVCand Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) having good screw holding capacity Minimum Compissive of 50 N/mm2,of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant complete all as specified. |
| 106 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50mm x 100mm of requiredsize and coloured comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximumoxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawaltrength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and as directed by engineer -in - charge. |
| 107 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximumoxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawaltrength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and as directed by engineer -in - charge. |
| 108 | S&FFactory made30 mm thick single extruded WPC (Wood Polymer Composite) one side decorativeother side plainof solid shuttercomprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 109 | S&F Providing 30mm thickfactory made wire mesh solid WPC door shutter both side decorative /laminated structureconsisting of Density 500 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19x6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer\"s specification & drawings. |
| 110 | S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming toFe -290 Gde E-165 complete all as specified and directed. |
| 111 | S & F 100 mm sizestain less steelhinges,with mild steel hinge pin, bright polished and fixed, typeB-11 Complete all as specifiedand as directed by Engineer-in-Charge. |
| 112 | S&F 200 mm long stain less steelhandles, Complete all as specifiedand as directed by Engineer-in-Charge. |
| 113 | S&F Stain less steel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200mm long. |
| 114 | S&F 150mm Floor door stopper of bassbody and tongue with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 115 | M&L Second class hard wood (Sal) plain, solid, straight chowkhat & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 116 | S&F PVC Pre - laminated factory made almirahs cupboard andtoilet cabinet WHB under counter-type & washbasin cabinet shutter with frameof 18 mm thick approved colour /shed quality and make made from PVC one side pre laminated sheet .The exposed edges shall be sealed with PVC edges beading of same shed and colour, the shuttershall be fire retradent having necessary screws & sliding chennals forholding capacity,Shutter shall be fixed to frame using approved hinges with necessary stain less steel screws,andincluding taking down toilet cabinet/ cub bord shutters with frameof any description etccomplete all as specified andas directed. |
| 117 | S&F stainless steel butt hinges size of width as per site requirement complete all as specified and as directed |
| 118 | S&F 150 mm long Extruded brass handles, fabricated type polishedComplete all as specifiedand as directed by Engineer-in-Charge. |
| 119 | S&F Magnetic cather for cupboard fixed with fixing arrangement complete all as specified . |
| 120 | S&F LDPE pipe 50mm of pressure rating 6Kgf/sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 121 | Dismantling stone slabs and tiles of any descritpion or thickness in floors/skirting laid bedded in any mortar complete all as specified and directed. |
| 122 | M&L for Cement concrete 1:4:8 type D-2 (40 mm graded aggregate) asin foundations, filling and mass concrete |
| 123 | Material and labour machine cut granite18-20 mm thick (of any type) work (table rubbed and polished) in WHB under counter-type platforms, verticle surface of walls,coloumns, beam, pillar, gate platforms, steps, trade, riser, landing etc up to 2.5 mtr heightand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade laid over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer-in -charge. |
| 124 | S& F green marbleof 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,Jambs, trade, riser, landingetc cooking platformslike in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble andincluding 15mmthick screedin CM 1:4 all as specified and directed. |
| 125 | Rounding to edges of stone slabs one edge such as in steps & platform etc , complete all as specified and directed. |
| 126 | M & L for Preparation of old painted steel surfaces of any description having width/girth exceeding 10cm and apply two coat of anticorrosive paint complete all as specified and as directed. |
| 127 | M&L for Preparation of newsteel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of anticorrosive painta coat primercomplete all as specified and directed. |
| 128 | M&L for RCC Nominal Mix Type B0 1:2:4 (20mm graded, aggregate) as in Chajjas,col, beam for arch all as specified and directed by Engr-in-charge. |
| 129 | M&L for Formwork to soffits and sides of Chajjas, col, beam for arch all as specified and directed by Engr-in-charge. |
| 130 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 131 | Material and labour for repairing of soffits of slabs, chajja, facia and similar works by dismantling of loose/ disintegrated portion of RCC at any height (upto 10 Mtr) and in any sitution, including provn of support,formwork and welding of reinforcement and fixing in position and with provision of weld mesh, applying dubbing 1st coat of 20 to 25mm thick in CM 1:3 finished rough and finishing coat of 10mm thick in CM 1:3 finished even and smooth without using extra cementover and including cement slurry @ 3 kg/sqm, finished even and smooth to desired shapeand applyingtwo coats of weather proof exterior emulsion paint over a coat of arylic resistant primer to match with existing surfaces complete all as specified and directed.(weld mesh measured and paid sepatrtely)Note:- (i) Unit rate of this item includes the cost of scaffolding, formwork etc. and nothing extra shall be paid on account of variation in height. (ii) For payment purpose, the area of finished plaster in 2nd coat shall be considered. |
| 132 | Removal ofdamaged existng APP mambraneof roof including danmaged levelling concrete and rougheningsurfaces of concrete slab by picking, sweeping clean and washing down with water to remove dust etc and applying evenly cement slurry at the rate of 3kg / sqm over cleaned roof surfaces including removal ofdebriscomplete all as specified and as directed by Engr-in-charge. |
| 133 | Material and labour for PCC 1:2:4 type BO (using 12.50mm graded stone aggregate) for roof,kerbs or mud stops,roundedor chamfered on eds etc including mixing of admixture fosroc SP 430 of M/S Fosroc chemical @ 250ml per 50kg of cement over existing roof and in padding concrete to maintain required slopecomplete all as specified and as directed by Engr-in-charge. |
| 134 | Material and labour for screed bed layer 10 mm thick in CM 1:4 onconcrete surfaces of roof, mixed with integral water proofing compound @ 3% by weight ofcement,finished even and smooth without using extra cementcomplete all asspecified and directed. Note:- WPC will be measured and paid separetly under respective item. |
| 135 | Supply and Application of 5 Layer Solar IR Heat Reflective Waterproofing Coating System on leaking concrete surface by thorough surface preparation to remove dust, dirt, molds etc using steel wire brush/power brush, high pressure water jet as applicable, opening the cracks, and then applying the entire surface with one absorption coat of nano modified, UV resistant non-styrene elastomeric clear coating having min. 50% solids (i.e. Thermacool WP51) then filling the cracks with waterproofing putty and then overcoating with a sandwich waterproofing Coat of Thermacool WP51 + Cement mixture having non-woven fibre mesh of min. 80 GSM followed by an additional elastomeric waterproofing coat (i.e. Thermacool WP51 + cement) having +450% Elongation, Tensile Strength min. 2.2 MPa and then top-coating with 2 Coats of pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) Solar IR Heat Reflective coating conforming to BIS STD IS 17218:2019 (i.e. Thermacool 0.3C) with pull off adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 sqm/Ltr/2 coat, dft 100 - 120 microns using brush, roller, airless as applicable or equivalent make or guidelines of similar product mentioned below. The application to be done by manufacturer approved applicators only”. |
| 136 | Excavation in trenches, n exc 1.50 mtr wide and n exc 1.50 mtr in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and n exc 1.50 mtr in depth and getting out inhard densesoil. |
| 137 | Returning filling in soft/loose soil,including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified. |
| 138 | Removing excavated material / soil exc 250 m but n. exc 500 m and depositing whereasdirected. |
| 139 | M&L for reinforced concrete pipes class NP-2 ,150 mm dia laid and jointed coplete with collars and including demolition and breaking up Existing SGSW/RCC/SWRpipes concrete bed including packing under and haunchingjointed in cement mortar and taking out of trenches if requiredetc,complete all as specifed and directed. |
| 140 | M&L concrete bed to 150 mm dia pipes of cement mortar 1:3:6 type C-2 including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed. |
| 141 | S&F 6 mm thick frame less bevelled edge mirror fixed with steel stud including taking down existing one complete all as specified and as directed by Engineer-in-Charge. |
| 142 | S&F 200 mm long stain less steelsliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixedComplete all as specifiedand as directed by Engineer-in-Charge. |
| 143 | S&F 300 mm long stain less steelsliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixedComplete all as specifiedand as directed by Engineer-in-Charge. |
| 144 | M & L and repair chequered cement concretetiles 30cm x 20cm x 30mm thickfactory made with approved colour, design & pattern and glossy finish as in footpath, parks, lawns, drive ways or light traffic parking etcof required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternand polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor fnishes in cement mortar (1:6) including taking down existing tiles complete all as specified and as directed byEngineer-in Charge. |
| 145 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power)complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removingmaterials to store forkeeping in safe custody or for taking credit (credit for above items should be made for conditions separately )and including making good the disturbed surfaces to match with existing surface and colour shade with proper puttyfor smooth finishing without andulations complete all as specified and directed. |
| 146 | Material and labour for cutting chasing,pinning inbrick/ stone/concrete wallat any height wall cutting and chases for concealedwiring PVC pipe layingof20/25 mmdia pipes,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landings,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed |
| 147 | Materialand labour for point wiring complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed,multistranded,single core, copperconductor cable 1100 volts grade using approved colour coding drawn through and including PVCconcealed conduit 20/25 mm dia medium grade (MMS) and incliding all accessories such as bend,tee,elbows,reducers,bell mouth tube ends,short pieces & junction boxes with PVC covers etc inwalls / roofs / floors / ceiling etc andincluding cutting, chasing work at any heightwith flush mounting GI sunken boxes having top,bottom,side/back side knockout for conduitentry from any direction made out of 1.2mm thick, 60mm deep for housing modular switches,sockets,fan regulators, Indicators,blank plate etc and incl Providingmodular white cover plate with inner frame suitable as per switch modules andincluding PVC insulated multistranded copperconductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directedfor One light point controlled by one 10amps switch, one way |
| 148 | All as per item no. 147 but forOnefan point controlled by one switch 10 amps, and oneregulator. |
| 149 | All as per item no. 147 but forOneexhaust fan point controlled by one switch 10 amps,one way |
| 150 | All as per item no. 147 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board . |
| 151 | All as per item no. 147 but for One 5 pin 10 amps socket point controlled by one 10 amps switch on same board . |
| 152 | All as per item no. 147 but forOne bell/buzzer point controlled by one bell push. |
| 153 | All as per item no. 147 but for One light point controlled by two 2 way switches. |
| 154 | All as per item no. 147 but for One 6 pin 16/20amps socket outlet point controlled by one 16/20 amps switchon independent board. |
| 155 | All as per item no. 154 but forOne 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board. |
| 156 | All as per item no. 147 but for point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed. |
| 157 | Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, with small indicatorISI Markedcomplete all as specified and directed. |
| 158 | Supply & fixing modular type switch 10 Amps ,2way,single pole,1 module,240V,AC,with small indicatorISI Markedcomplete all as specified and directed. |
| 159 | Supply & fixing modular type bell push10 Amps,1 module, single pole, 240 volts,AC, with embosing bell simble & indicator, ISI Marked complete all as specified and directed. |
| 160 | Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V,with small indicator,AC, ISI Marked complete all as specified and directed. |
| 161 | Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,ACISI Marked complete all as specified and directed. |
| 162 | Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,ACISI Markedcomplete all as specified and directed |
| 163 | Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 moduleISI Marked complete all as specified and directed. |
| 164 | Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 1 to 8 steps,ISI Markedcomplete all as specified and directed. |
| 165 | Supply and fix call bell AC, 230 Volts single pole, multi music type best and superior quality,ISI marked, as approved type complete all as specified and directed. |
| 166 | Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbscomplete all asspecified and directed. |
| 167 | Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed |
| 168 | Supply & fixdecorative box type 20 watt light fitting, end caps, pre-wired and including providing single/double sideLED tube light (tube rod) white/warm 20 watt-01 Nomade of aluminium extrusion with high efficientLED driver,IP-20, Tube efficiency of 100lm/w, including PVC/Wooden round/square block -02 Nosand connected with LED fitting to ceiling roseand including removing old unserviceable fitting complete all as specified and directed.. |
| 169 | Supply and fixing 20 watt LED batten nicolaus glamtubeintegrated design, easy to install,efficency,125 lm/w,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. |
| 170 | Supply and fixing 36 wattsLED supernovalight fitting high wattage completeLED lighting white/warm with high lumen output,environmental friendly,energy efficient, integrated design, easy to install,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed. |
| 171 | Supply and fixing LED 20 watt,6500K, Pride plusinverter batten,decorative type light fitting white lighting, with square profile and polycarbonate channel,lithium lon battery with charging time 8 hours to 10hours and back up time upto 4 hours high quality materials and design,extruded aluminium housing enhances safety,high quality PC diffuser, easy to install, efficency 125 lm/wand including providingpre-wired, and PVC/Wooden round or square blocks -02 Nosand connected with LED fitting to ceiling roseand removing old unserviceable fitting complete all as specified and directed. |
| 172 | Taking down old unsv light fitting from existing location and Supply and fixing 20 watts LEDAustra ARK Batten, 3-in-1 smart light fitting,6500K,contemporary design of mirror light complete decorative LED lighting with extruded polycarbonate, environmentalfriendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminalcomplete all as specified and directed. |
| 173 | Taking down old unsv light fitting from existing location and Supply and fixing decorativeSana wall lightglobe type,high quality ploycarbonate materials suitable for 10 to 15 watt LED lamp white/warm as per requirement ,B22,220 Volts ACwith high efficiency, soft glare free light complete with LED lamp,holder suitable for fixing onwall surface including providing5 mm thick hylem sheet or plastic 5 mm sheet suitable for light fitting,screws,nuts,small bolts and washers and connected with LED fitting to ceiling rose terminalcomplete all as specified and directed.. |
| 174 | Supply and fixing 12 wattLED panel type slim, compact,aliminium die cast edge lit panel recess mounted square/round type light fitting with LED opal diffuser (lamp/strip) and separate electronic LED driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified |
| 175 | Supply &fixing , in repairs LEDbldg secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65/66 protectionand including removing of old unserviceable item complete all as specified and directed. |
| 176 | S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired ofluminaires including LED light driver and connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed. |
| 177 | Supply & fixingand sheet metal enclosurewithdouble door ,415 volts AC,VTPNDB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer,and MCB SPN/SP/TPNas outgoing and complete forIP43&54 DBs protection and includingremoving old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. |
| 178 | Supply & fix and in repair sheet metal enclosure acrylic door 240 volts AC,SPNdistribution board 12 wayfor flush mounting with 100amps copper busbar,neutral bar,earth bar suitable for MCB incomer of rating upto 100Amps ,MCB SPN/DP,and MCB SP as outgoing and complete connecting cable linkswith top and bottom removable gland plates withIP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coatall as specified and as directed. |
| 179 | Supply & fixing andsheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoingforIP 43& IP54 DBs protection nd includingremoving old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. |
| 180 | Supply & fixMCB SP 6 to 32 Amps 10 KA,\"C\" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed. |
| 181 | Supply & fix and MCB SPN 40 to63 Amps 10 KA,\"C\" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed. |
| 182 | M & L for sub main wiring complete with 4 run of 10 sqmm single core copper conductor (ISI marked)cable1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi strandedcolour coded cables drawn through and including rigid PVC conduit 25 to 32 mm dia in concealed ISI marked medium grade(MMS) with all connected accessories such asBend,Tee,Elbow,Short peices etc concealed in wall/roofs/floorsand including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Note : - Four run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 183 | All as per item No.183but for2 Run x 6 Sqmm with 1 run x6 sqmm as earth continuity and one run of PVC conduit shall be measured as one unit.complete all as specified ad directed. |
| 184 | All as per item No.183but for 2 Run x 4 Sqmm with 1 run x 4 sqmm as earth continuity and one run of PVC conduit shall be measured as one unit.complete all as specified ad directed. |
| 185 | All as per item No.183but for 2 Run x 2.5 Sqmm with 1 run x 2.5 sqmm as earth continuity and one run of PVC conduit shall be measured as one unit complete all as specified ad directed. |
| 186 | All as per item No.183but for 2 Run x 1.5 Sqmm with 1 run x 1.5 sqmm as earth continuity and one run of PVC conduit shall be measured as one unit complete all as specified ad directed. |
| 187 | Supply and fixsuitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20Amps, 10KA \"C \"series, 230 Volts,50Hzsuitable for AC\"s/Geysers complete all as specified and directed. |
| 188 | Supply and fixMCCB,100 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washersand including removing old unserviceable itemcomplete all as specified and as directed. |
| 189 | Taking down old unsv ceiling fan from existing location and supply and fixnew ceiling fan with blades, down rods, and connected accessories, 230 V, 1200 mm sweep, with squirrel cage induction motor, anti dust painted, dust free,high speed. Star ratedcomplete all as specified and directed. |
| 190 | Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steel /PVC body AC single phase.230Volts of size 300 mm sweep with bladesand including providing insect protection net frame , with louvers and frameincl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed. |
| 191 | Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixingexhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 200 to 300 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed. |
| 192 | Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody andSupply anf fixingexhaust fan made of sturd engineering plasticPVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep250 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directed . |
| 193 | Supply and fix wall mouted fan 230Volts, single phase, oscillating type, 450 mm sweep, Hi-speed,low noise, heavy dutywith blades and outer cover and including providing hanging hook and connected items complete all as specified and directed. |
| 194 | Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 200 to 450 mm sweep exhaust fan including providingnut,bolt and washers after grouting in PCC and including 3 mm dia 5 cm apreature size GI jali and properaluminium frameto avoid insect protection fix at inner surface of wall andmaking good the disturbed surface area complete all as specified and directed. |
| 195 | Taking down old unserviceable geyses of any capacity from work site at any height and deposit to MES store yard for safe custodyand Supply and fix new electric water heater, storage type steel body/plastic body with copper inner tank and heating element upto2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve,thermostat, NRV, Hot waterand Cold waterheavy duty connection pipes-02 Nos,holefasterns-04 Nosand necessary accessories as per site requirement etc.complete all as specified and directed. |
| 196 | Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres belowground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipeof 15 mm diafrom earth electrode up to test point or up to 7.5mtr whichever is less by means of GIbolts, nuts, check nuts and washersall as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required valueincluding removing old item completeall as specified and directed. |
| 197 | Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirementwith hot or coldbending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixedonwall surfaces and including providingsuitable fabricate galvanised flat ironclamps of 30X6 mm thick-02 Nossuitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed. |
| 198 | Taking down carefully existing Air Condition unit indoor and out door units of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and refixing after completion Civil and Electrical work and including providing outdoor unit MS stand,nuts,bolts and washers etc complete all necessary accessories forsatisfactorily functioning Complete all as specified and directed. |
| 199 | Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and supply and fixingsmart electric meter single phase four wire energy meteras per BIS -16444 2015 (Reaffermid 2020), ISI marked in existing board /floor panel having current range 10-60 Amps,240 Volts, accuracy class 1.0 and including providing necessary items for functioning complete all as specified and directed. |
| 200 | Supply and fix inrepairs thermoplastic box of size mm (L X B X H)for above electrical energy meters confirming to IP -65 with transparent lid hinged door, mounting plate,DIN rail with fastening screws and other necessary accessories complete and fixing on wall for housing KHW meterand including removing of old unserviceable item complete all as specified and directed |
| 201 | S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN,telephone and TV connections including cutting,chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed. |
| 202 | Supply and fixing TVsockets one module with top cover plate and inner frameincluding all necessary accessories and including removing of old unserviceable item complete all as specified and directed. |
| 203 | Supply and fixing Telephone socket(RJ11) one module with top cover plate and inner frameincluding all necessary accessories and including removing of old unserviceable item complete all as specified and directed. |
| 204 | Supply and fixing LAN/USB socket(RJ42) one module with top cover plate and inner frameincluding all necessary accessories and including removing of old unserviceable item complete all as specified and directed. |
| 205 | Supplying and laying of CPVC /UPVC pipes SDR 11 & Plain SDR 11 incl allfittings of outer dia 25 mmon walls with clampingfor AC\"s drain pipe complete all as specified and directed. |
| 206 | Supply and fix down rodmade of GI pipe medium grade 15mm dia of 900 mm long duly drilled holes both ends & slots with hole in other end and icluding providing holefastners,hook,clamps suitable for fixing of ceiling fan of any sweep/type and painting to down rodwith two coat of synthetic enamel paintover one coat of red oxide primer and complete all as specified and directed. |
| 207 | Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 35 sqmm ,3.5 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testingand including removing old unsv UG cables complete all as specified and directed. |
| 208 | Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 6 sqmm ,2 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testingand including removing old unsv UG cables complete all as specified and directed. |
| 209 | Supply & fix andfixing in repairs 40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protectionand providing suitable fixing arrangements such as necessarycivil work, nuts,bolts and washers andincluding removing old unserviceable itemcomplete all as specified and directed. |
| 210 | Supply and fix10 watts LEDbollardlight fittings with made in die cost aluminiumspigot complete fitiing,robust design and efficiency 360 degree lighting distribution,twister type ,IP65 protection and providing suitable fixing arrangements such as necessary civil work, nuts,bolts and washers groutingin PCC foundationand incl removing old unsv item complete all as spfd and directed. |
| 211 | Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed. |
| 212 | Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portioncoping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washingmade by the contractor costdeemed intoquoted rete only. |
| 213 | Material & labour for GI pipe 50 mm \"light grade\" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST |
| 214 | Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all asspecified and directed. |
| 215 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed |
| 216 | Removing excavated soil not exc50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed |
| 217 | Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. |
| 218 | M & L for brick sub class \"B\" 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cablecomplete all as specified and directed. |
| 219 | Supply only fabricated flat ironMS clamps 25X5mm & 30 mm x 6 mm as required and including necessary holes,nuts,bolt and washers etc andbending, fabrication, cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat one undre coat and one finishing coat of paint and directed |
| 220 | Supplyand fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including PVC(MMS) conduit pipeand including removing old unserviceable item complete all as specified and directed. |
| 221 | Supply and fixand in repairs FRP looping box of size 200X200X160 hinged type with incoming and outgoing connector/terminals and comprising of MCB SP 6 Amps,240V,10KA,\"C\" Seriesand including MS flat iron clamps of size 25X5mm thick-02 Nos,nuts, bolts & washers etc for fixing on PCC/Steel tubular pole/ wall surface etc and including removing of old unserviceable item complete all as specified and directed. |
| 222 | Material and labour for galvanized iron tubing 40 mm dia \"\"medium grade\"\" in any length including including embedded in walltwo ends duly welded MS holdfast at two ends of GI pipe and providing PCC in wall and making good distribed surfaces complete all as specified and directed. |
| 223 | Material and labour for 3-layer PP-RPolypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.ISI Marked IS-15801 lying in trenches/wallc/ceilings or in floors and necessary clamps, saddles etc complete of size outer dia 25 mm complete all as specified and directed. |
| 224 | Supply and fixing PPR gate valve(Brass insert) of dia 25 mm fixing at near to building on wall upto one meter height complete all as spfd and directed. |
| 225 | Making connections of PPR pipes distribution branches with PPR main of following sizes of 50 to75mm by providing and fixing tee including cutting and making fusion joint etc |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
