Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 2 | Dismantling of tile, floor, hearth, walls, roof tiles including bedding (but not backing), and rubbish off permises complete all as specified and directed. |
| 3 | Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition)such as cooking platform, chajjas etc complete all as specified and directed. |
| 4 | Demolition of RCC of any description and in any position not other wise specially provided for reinforcement cut as required to facilitate demolition complete all as specified and directed. |
| 5 | M&L for vitrified ceramic tiles dark shade/double charged/ultracharged polished (square/rectangular) of 8 to 10 mm thick , area of each tiles size 600mm x 1200 mmas in floor etc set and jointed in neat cement slurry and pointed in as per required coloured cement to match the surface of tile complete all as specified and directed |
| 6 | M&L for 10 to 12 mm thickdark shade/double charged/ultracharged vitrified ceramic tiles in Dado/ vertical surfaces,tiles size 600mm x 1200 mm as in wall set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 7 | M&L for Rendering 10 mm thick in cement mortar 1 : 4for fixing of wall tiles complete all as specified and directed. |
| 8 | M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6for laying of floor tiles complete all as specified and directed. |
| 9 | M&Lfor PCC 1:2:4type B-0using 12.50 mm graded aggregate as in sub-base flooring25 mm thick surface finishedeven and rough to receive the topping layer complete all as specified and directed. |
| 10 | M&L for joint free anti- non skid ceramic colouredtiles 10 mm thick(square) area of each tile size 600 mm x 600 mmin floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles as approved complete all as specified and directed. |
| 11 | M&L for glazed ceramics/vitrified coloured tiles of size 600 mm x 1200 mm, thickness 10 mm to 12 mmin vertical surfaces such as dados in toilet etc, jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles complete all as specified and directed. |
| 12 | M&L for the suken floor RCC slab including sides to the full extent of sunken portion in upper floor shall be prepared and plastered with 15 mm thick cement plaster in CM 1:3 with water proofing compound as per manufacturer\"sinstructions and finished even and smooth without using extra cement. When the plaster is cured and dried up, apply a uniform coat of blown grade bitumen 85/25 @ 1.2 kg/Sqm confirming to IS 702 over a coat of primer @ 0.70 Kg.Sqm over plastered surface including WPC complete all as specified and as directed. |
| 13 | Water proofing treatment to Sunken floor slabe complete as specified bellow and as directed.(a) Provide and lay 4mm thick APP modified torch applied prefabricated five layer water proofing membrane weight not less than 3.60 Kg/Sqm.(b) Apply a uniform coat of blown grade bitumen 85/25 @ 1.2 Kg/Sqm confirming to IS 702 of the surface area complete all as specified. |
| 14 | Supply and Application of 2 Layers/two coats of waterpooring membrance or waterpoofing treatment of bathroom sunken by chemical treeatment over concrete, PIDIPROFF LW of Dr. Pidilite or equivalent approved as per manufacturer instructions omplete all as specified and as directed. |
| 15 | M&L for 40 mm thick PCC 1:2:4 type B0 (12.5 mm graded ) stone aggregate as padding concreteetc complete all as specified. |
| 16 | Demolition of brick work or stone/ boulder masonary built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 17 | M&L Brick work with Fly Ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 18 | M&L Brick work withFly Ash bricks bricks straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed. |
| 19 | M&L PCC 1:4:8 type D-2 using 40mm graded aggregate as in floor, filling and mass concrete complete all as specified and directed. |
| 20 | M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses, chajjasetc and similar work including weathering, slightly rounded or chamfered angles and throating including necessary form work etc all complete all as specified and directed. |
| 21 | Taking down cement plaster any description on brick or stone walls etcincluding raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 22 | M&L Rendering on fair faces of brick work or concrete surfaces of wall 10 mm thickin CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L Rendering 15 mm thick in cement mortar 1:6 in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces,second layer (finishing coat)mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer\"s instructions and finish the surfaces even and smooth without using extra cement including WPC complete all as specified and directed. |
| 24 | M&L Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed.. |
| 25 | M&L Cutting holes in brick walls/stone walls/ Concrete walls as per requirement in brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. |
| 26 | Taking down chowkats or frames with shutters of any description (without taking off shutters from the frames) area n. exc 1.5 Sqm each and removing to store complete all as specified and directed. |
| 27 | Taking down chowkats or frames with shutters of any description (without taking off shutters from the frames)area exc 1.5 Sqm but n.exc. 4 Sqm eachand removing to store complete all as specified and directed. |
| 28 | Providing and fixing factory made uPVC any approved colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm longfasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing withselected quality glass.(Note: The unit rate quoted by contractor includes cost of glass and panel and includes all other connected accessories) |
| 29 | S&F factory made UPVC any approved colour Slinding Window threetrack made of extruded profiles with wall thickness of 2.3mm (±0.2mm),Window profile with hollow section with multi chamber, frame (88mm X 52mm), sliding sash (42mm X 67mm), Sliding mesh sash (42x57mm), sliding interlock(one vertical length in each shutter) (45.5mm X 28mm), glazing bead (24.5mm X 16mm) willbe mitered, cut and fusion welded at all corners, including railing of holesfor fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanised steelframe (30mm x 18mm) 2 Nos, sliding sash (30mm X 18mm) 2 Nos, sliding mesh sash (26mm X 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners.Haradware (tough lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of apaerture 1.40mm and required accessories. Note :The unit rate includes cost of glass and all other connected accessories). |
| 30 | S&F factory made UPVC any approvedcolour fixed or louvered window/ ventilator made of extruded profile with wall thickness of 2.3mm (+-2mm).Window profile with hollow section with multi chamber.Frame (60mm X58mm).T profile (one vertical length in between two shutters) (60mm X 74mm).Glazed bead (35mm X 20mm) will be mitered cut and fusion selded at all corners including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 +-0.2mm thick glavanised steel frame (28mm X 21.5mm), T profile (27mmX 17mm) to be inserted in repair profile.Frame will be fixed to the wall with 8mm X 100mm long fasteners.5mm thick glazing with selected quality glass and gauge as required at site.(Note : The unit rate includes the cost of glass, gauge and all other connected accessories) area n.exc 1.00sqm each. |
| 31 | S&F Solid WPC frame (Single Rebated) of approved colour of size 50mm x 75mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheetmetal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be waterproof, termite proof, elegant and should have excellent screws holdingstrength to fix hinges and hold doors properly for a long life) complete all as specified Note:Make \"RAJSHRI\" Brand. |
| 32 | S&FFactory Made 24 mm thick 100% Solid WPC ( Wood polymer Composite ) LaminatedFlush door Shutter of required size and colour(one side decorativeother side plain )comprising of virgin PVCand Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) having good screw holding capacity Minimum Compissive of 50 N/mm2,of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant complete all as specified.Note:Make \"RAJSHRI\" Brand. |
| 33 | S & F 100 mm sizestain less steelhinges,with mild steel hinge pin, bright polished and fixed, typeB-11 Complete all as specifiedand as directed by Engineer-in-Charge. |
| 34 | S&F 200 mm long stain less steelhandles, , complete all as specified and directed. |
| 35 | S&F Stain less steel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200mm long. |
| 36 | M&L forReinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 37 | M&L forReinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Beams, cantilevers, bressummers, chajjas,lintels over 1.5m span complete all as specified and directed. |
| 38 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions (sqaure, rectangular or polygon) with fair finished surfaces complete all as specified and directed. |
| 39 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, chajjas, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Flat, with fair finished surfaces complete all as specified and directed. |
| 40 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 41 | M&L for Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speified and directed. |
| 42 | M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as speified and directed. |
| 43 | S&F vitality rectangular lighted mirror size 76.2 Cm x 101.6 Cm Featuring un matched quality and aesthetic, touchless sensor technology powers lighting with a simple wave of hand, complete all as specified and directed. |
| 44 | Supplying and laying of 15mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings,fixed on walls/ceiling or laid in floors, etc, including brass tee, elbow, union,complete all as specified and directed. |
| 45 | Supplying and laying of 20mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings,fixed on walls/ceiling or laid in floors, etc, including brass tee, elbow, union, complete all as specified and directed. |
| 46 | Supplying and laying of25mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, fixed on walls/ceiling or laid in floors, etc, including brass tee, elbow, union, complete all as specified and directed. |
| 47 | Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed. |
| 48 | S & F in repair one piece EWC with vibe sense duroplast slim seat cover and twin fittings 660 x 350 x 745 mm (Snow white) S trap 300 mm and fittings, (Make CeraCt No S1013230) or equivalent of cera , jaquar, parryware complete all as specified and directed |
| 49 | S&F in repairs chromium plated Health Faucet, alongwith all connected items suitable for EWC including nut/washer complete all as specified and directed. Make Jaqur |
| 50 | S&Fin repair PVC connection 15mm dia size with PTMT nuts and 450 mm long complete all as specified and as directed. |
| 51 | S & F in repairs C P Towel ring not less than 250mm dia, fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed |
| 52 | S & F in repairs Tubular Towel Rail 20mm dia. \"D\" type, 600mm long of CP fixed with and including brass Chromimum plated brass screws and wooden/plastic cleat as specified |
| 53 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 54 | S&Fin repair CP two way angle valvewith wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 55 | S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed. |
| 56 | S & F in repair Toilet paper holder, C P box type complete all as specified and |
| 57 | S&F CP Grating 75 mm dia fixed with white cement complete all as specified and directed. |
| 58 | S & F in repair CP Grating doom 125 mm dia with waste hole(minimum weight 40gms) complete all as specified and directed. |
| 59 | S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed by Engineer-in-charge. |
| 60 | S&F in repair Glass shelf assembly cosisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed. |
| 61 | S & F in repair 450mm long Stainless steel six peg hanger chromium plated as approved by Engr-in -charge complete all as specified and directed. |
| 62 | S&F vitreous china urinal, full stall sensor based type white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back with senssor bassed spreader, grating and bottal trap with discharge pipe alongwith all connected accessories, installation systems complete all as specified and ad directed . |
| 63 | M&L for 12 mm thick toughfened glassfor urinal partition including fixed to wall hung complete all as specified and directed. |
| 64 | S&F Antao vanity wash basin 1000x500x150 mm with concealed over flow white Alpin ceramic plus rectangle mode No 4A786AB alongwith all connected accessories, installation systems wall mounted type incl with ceramic valve cover CP brass center hole mixer for vanity wash basin for mixing hot and cold water screwed down for iron/CPVC pipe and fixed for 15 mm bore CPVC pipe as required sizeas aproved by Engr-in-Charge complete all as specified and directed. |
| 65 | S & F for rotational moulded triple layered HDPE antibacterial water storagetank cylindrical, hoisted & fixed in position all as specified capacity 1000 ltrscomplete all as specified and directed. |
| 66 | S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminiumrod& high density plastic ball screwed for iron pipe and fixed.(Minimum weight210gms) complete all as specified and directed. |
| 67 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 25 mm bore,screwed both ends for iron pipe complete all as specified and directed. |
| 68 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 69 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 70 | S&F PVC (SWR) pipes 150 mm bore single socketed in any length with rubber ring joints fixed to wall/truss/purleen complete including bends,sockets, etc all as specified and directed. |
| 71 | S&F PVC (SWR) pipes 200 mm bore single socketed in any length with rubber ring joints fixed to wall/floor/WC/First MH etc including bends. elbow etc as per pipe/site requirement complete all as specified and directed. |
| 72 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 73 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 74 | S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110 mm PVC pipe complete all as specified and directed. |
| 75 | S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 75 mm PVC pipe complete all as specified and directed. |
| 76 | S&F PVC(SWR) bends, any radius of 110 mm bore without access door complete all as specified and directed. |
| 77 | M/L PVC(SWR) Tee of110mm dia etc complete all as specified and directed. |
| 78 | S&F PVC(SWR) bends, any radius of 200 mm bore without access door complete all as specified and directed. |
| 79 | S&F PVC(SWR) bends, any radius of 150 mm bore without access door complete all as specified and directed. |
| 80 | S&F PVC(SWR) bends, any radius of 75 mm bore with access door complete all as specified and directed. |
| 81 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed. |
| 82 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 75 mm dia with access door complete all as specified and directed. |
| 83 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 84 | S&F PVC (SWR) \"P\" trap for 110 mm dia etc complete all as specified and directed. |
| 85 | S & F for rotational moulded triple layered HDPE antibacterial water storagetank cylindrical, hoisted & fixed in position all as specified capacity 500 ltrscomplete all as specified and directed. |
| 86 | S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminiumrod& high density plastic ball screwed for iron pipe and fixed.(Minimum weight210gms) complete all as specified and directed. |
| 87 | S&F uPVC for shutters of doors,slidingwindows & ventilators including providing and fixing hinges/ pivots and making provision for fixing ofittings wherever required including the cost of EPDM rubber/neoprene gasket requiredincluding all fittings with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. uPVC sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, uPVC snap beading for glazing/ paneling, C.P. brass/, and in cludingas suitable hinzes stainless steel screws all as complete directions by Engineer-in-charge. |
| 88 | S&F uPVC work sliding arrangement framefor doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/eoprene gasketetc. uPVC sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, uPVC snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all as complete directions by Engineer-in-Charge |
| 89 | S&F 12mm thick Toughned glass as in hinged doors, partitions automatic doors, windows and similar work including cutting to shape, drilling holes required completed all as specified and directed as in Engr-in-Charage. |
| 90 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1998 grade St-240 complete all as specified & directed. |
| 91 | M&L for Fe 410-W (Gde E-250 quality A) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 92 | M&L for Fe 410-W (Gde E-250 quality A) Framed work as in doors or gates of angle or other section with gusset plates,rails,braces etc complete,drilled for fixing of steel sheeting or other covering. Doors,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening anf fixing complete all as specified and directed. |
| 93 | Mild screw bolts (Machine made) with hexagonal or square head at one ends andto fitted and one hexagonal or square long, dia of neck as per site requirementall as specified and directed. |
| 94 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 95 | S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 96 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified & directed. |
| 97 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified & directed. |
| 98 | M&L for preparation of new or previously untreated surfaces of any description, over 10 cm in width or girth, not otherwise described & apply two coat of synthetic enamel (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified & as directed. |
| 99 | S&F 12 mm thick plain Gypsum Board False Ceiling with GI frame including all necessary drilling cutting to fix electric items complete all as specified and directed with following:-(a) GI Grid channel 30x25x20 mm of 24 gauge fixed with rawl plug and screw 450 mm centre to centre alongwith perimeter walls.(b) GI channel made to shape 50x40x40 mm of 24 gauge placed @ 600 mm centre to centre from perimeter at wall except long wall (in one span). (c) GI intermediate runners of size 45x10x10 mm of 24 gauge fixed @ 1200 mm centre to centre leaving frame of one side walls (in other span).(d) GI sheet 25 mm wide and 20 mm gauge suspended fixed with steel fastner to roof ceiling and 1200 mm centre to centre including pluging of RCC Slab/GI based shed/truss/purleen. (e) 12 mm thick gypsum board filling joints with POP and finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling. |
| 100 | M&L Plywood, grade BWR, type BB, 12 mm thickness in first layer for making the base for second layer for panelling fixed with nails to timber framework complete all as specified and directed. |
| 101 | M&L Plywood, grade BWR, type BB, 12 mm thickness in second layer for making the base for Wooden panelling fixed with screws complete all as specified and directed. |
| 102 | M&L Wooden Wall Panelling with 12 mm thick teak wood board planks of width 250 mm finishing plain and even complete all as specified and directed. |
| 103 | M&L preparation of newly untreated wooden surfaces of any description not other wise described over 10cm width or girth and applying two coats of wood varnishing over one coat of transparent wood filler liquid complete all as specified and as directed by Engineer-in-Charge |
| 104 | M&L Wooden lining top border of size 35 mm x 50 mm all along the Wall Panelling complete all as specified and directed. |
| 105 | S&F WHB under counter top-type of size 560x430x195mm oval shape including coupling complete all as specified and directed. |
| 106 | S&F Bottle trap chromium plated for WHB/Urinal as per approved quality all as per specified and directed. |
| 107 | S & F in repairs CP brass center hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed. |
| 108 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen orlaboratory with plugs, washers and wastes; including bedding in cementmortar to dwarf wall or including fixing cantilever brackets and connectingunion to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete and also including waste pipe all as specified and directed. |
| 109 | M&L 40 to 50 thick cuddapah stone for bar counter slabs, self etc not less then 80 cm wide, hoisted and set , jointed and grouted in cement mortar 1:6 complete as per site requirement all as specified and directed |
| 110 | M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, bar counter platforms etcand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 111 | Rounding to edges of stone slabs one edge as per ground requirement |
| 112 | S&F boards fabricated on Aluminum sheet, corrosion resistant Aluminum composite material (ACM) sandwitched construction with thermo plastic core of low density polyethelene (LDPE) between 2 mm thick sheets of Aluminium with over all thickness 3 mm or 4 mm and aluminium 5 mm thickness 0.5 mm both sides and also rytro vinyl print out including letters and signs of any size or numbers all as specified as directed by Engineer-in-Charge. |
| 113 | S& F arch or as per site requirement 600mm wide made up of 1 mm thick stainless steel (Grade 304) sheet with hanging arrangment of stainless steel Hollow square sectiionof size 50x50mm or of any size complete all as specified and directed by Engr-in-Charge. |
| 114 | M & L for preparation of newly plastered surfaces ofwall & concrete and applying 2 mm thick wall care putty in two layers including preparation and also internal & external as requirement complete all as specified and directed. |
| 115 | M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 116 | M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/ old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed. |
| 117 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power)complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removingmaterials to store forkeeping in safe custody or for taking credit (credit for above items should be made for conditions separately )and including making good the disturbed surfaces to match with existing surface and colour shade with puttyfor smooth finishing without andulations complete all as specified and directed |
| 118 | Material and labour for cutting chasing,pinning ofbrick/ stone/concrete wallat any height wall cutting and chases for concealedwiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed |
| 119 | M&L for point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed,multistranded,single core, coppercable 1100 volts grade cablesdrawn throughPVCConduit 20/25 mm dia medium grade(MMS) at any height and all accessoriesare concealedinwalls / roofs / floors / ceiling etc. flush mounting modular MS boxmade out of 1.60mm thick suitable for modular top cover and framefor fixing of modular switches,sockets,fan regulators, blank plate etc andincluding 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with coppercable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directedforOne light point controlled by one 10amps switch. |
| 120 | All as per item no. 119 but forOnefan point controlled by one switch 10 amps, and oneregulator. |
| 121 | All as per item no. 119 but for Oneexhaust fan point controlled by one 10 amps switch . |
| 122 | All as per item no. 119 but forOne 5 pin 6 amps socket point controlled by one 10 amps switch on independent board . |
| 123 | All as per item no. 119 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on same board . |
| 124 | All as per item no. 119 but for One bell/buzzer point controlled by onebell push. |
| 125 | All as per item no. 119 but for One light point controlled by two 2 way switches/bed switch point |
| 126 | All as per item no. 119 but forpoint wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switchon independent board. |
| 127 | All as per item no. 126 but forOne 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on same board. |
| 128 | All as per item no. 119 but forpoint wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed. |
| 129 | Supply & fixing modular type switches,10 Amps, single pole,1way,1 module,240V,AC,ISI Markedcomplete all as specified and directed |
| 130 | Supply & fixing modular type switches,10 Amps, single pole,2 way,1 module,240V,AC,ISI Markedcomplete all as specified and directed. |
| 131 | Supply & fixing modular type bell push10 Amps,1 module, single pole, 240 volts,AC, with embosing bell simble & indicator, ISI Marked complete all as specified and directed. |
| 132 | Supply & fixing modular type switches,16/20 Amps, single pole,1way,1 module,240V,AC,ISI Markedcomplete all as specified and directed. |
| 133 | Supply & fixing modular type socket with shuttered type 6/10 Amps, 2/3 Pin combined 2 module,240V,ACISI Marked complete all as specified and directed. |
| 134 | Supply & fixing modular type socket with shuttered type 16/20 Amps, 2/3 Pin combined 2 module,240V,ACISI Marked complete all as specified and directed. |
| 135 | Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 0 to 8 steps,ISI Markedcomplete all as specified and directed. |
| 136 | Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 moduleISI Marked complete all as specified and directed. |
| 137 | Supply and fix call bell AC, 230 Volts single pole, multi music type best and superior quality,ISI marked, as approved type complete all as specified and directed. |
| 138 | Supply & fixing angle lamp holder, insulated body with back plate for batten fittings,ISI Marked latestmodelcomplete all asspecified and directed. |
| 139 | Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI Marked latestmodelcomplete all asspecified and directed. |
| 140 | Supply & fixdecorative box type 20 watt light fitting, end caps, pre-wired and including providing single/double sideLED tube light (tube rod) white/warm 20 watt-01 Nomade of aluminium extrusion with high efficientLED driver,IP-20, Tube efficiency of 100lm/w, including PVC/Wooden round/square block -02 Nosand connected with LED fitting to ceiling roseand including removing old unserviceable fitting complete all as specified and directed. |
| 141 | Supply and fixing LED 20 watt,6500K, Pride plusinverter batten,decorative type light fitting white lighting, with square profile and polycarbonate channel,lithium lon battery with charging time 8 hours to 10hours and back up time upto 4 hours high quality materials and design,extruded aluminium housing enhances safety,high quality PC diffuser, easy to install, efficency 125 lm/wand including providingpre-wired, and PVC/Wooden round or square blocks -02 Nosand connected with LED fitting to ceiling roseand removing old unserviceable fitting complete all as specified and directed. |
| 142 | Supply and fixing 20 watt LED batten nicolaus glamtubeintegrated design, easy to install,efficency,125 lm/w,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. |
| 143 | Supply and fixing 36 wattsLED supernovalight fitting high wattage completeLED lighting with high lumen output,environmental friendly,energy efficient, integrated design, easy to install,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed. |
| 144 | Supply and fixing 20 watts LEDAustra ARK mirror smart light fitting one/two feet long,contemporary design of mirror light complete decorative LED lighting with extruded polycarbonate, environmentalfriendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. |
| 145 | Supply and fixed aesthetically designed LED flat panelsuitable for surface/Recess mounting which provides soft-light and glare free symmetrically illumination 2\"x2\" LED 40/42 Watt(600x600x70mm) light fitting and including providing internally prewired,LED driver,connector and also can besuspended with provided kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fittingand including removing old unserviceable item complete all as specified and directed. |
| 146 | Supply and fixing decorative LED 9 watt decorative, globe type,high quality ploycarbonate materials suitable for 9 watt LED lamp ,B22,220 Volts ACwith high efficiency, soft glare free light complete with LED lamp,holder suitable for wall surface and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. |
| 147 | S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired ofluminaires including LED light driver and connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed. |
| 148 | Supply and fixed in repairs LEDbldg secruity light fitting of capacity 45 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwith 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. |
| 149 | Supply and fix GI bracket pipe of size 32 to 40 mm diaas suitable medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirementwith hot or coldbending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixedonwall surfaces and including providingsuitable fabricate galvanised flat ironclamps of 30X6 mm thick-02 Nossuitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed. |
| 150 | Supply & fixingand sheet metal enclosure, double door ,415 volts AC,VTPNDB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer,and MCB SPN/SP/TPNas outgoing and complete forIP43&54 DBs protection and includingremoving old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. |
| 151 | Supply & fixing andsheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 12 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoingforIP 43& IP54 DBs protection nd includingremoving old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. |
| 152 | Supply & fix andsheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP,and MCB SP as outgoingforIP 43& IP54 DBs protection nd includingremoving old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. |
| 153 | Supply and fix mini MCB,32 A,DP \"C and motor starter including with suitable sunken box in concealed/surface and internally connected properly suitable for cooking electrical appliancesincluding protection and includingremoving old unserviceable items and making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. |
| 154 | Supply & fixMCB SP 6 to 32 Amps 10 KA,\"C\" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed. |
| 155 | Supply & fix and MCB SPN 32 to40 Amps 10 KA,\"C\" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed. |
| 156 | Supply & fix and MCB SPN 40 to63 Amps 10 KA,\"C\" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed. |
| 157 | Supply & fix and MCB TPN 4063 Amps 10 KA,\"C\" series,AC,415Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed. |
| 158 | M & L for sub main wiring complete with 4 run of 10 sqmm single core copper conductor (ISI marked)cable1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi strandedcolour coded cables drawn through and including rigid PVC conduit 25 mm dia in concealed ISI marked medium grade(MMS) ISI marked medium grade(MMS) with all connected accessories such asBend,Tee,Elbow,Short peices etc concealed in wall/roofs/floorsand including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Note : - Four run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 159 | All as per item No.158 but for2 Run x 10 Sqmm with 1 run x10 sqmm as earth continuity and one run of PVC conduit shall be measured as one unit.complete all as specified ad directed. |
| 160 | All as per item No.158 but for 2 Run x 6 Sqmm with 1 run x6 sqmm as earth continuity and one run of PVC conduit shall be measured as one unit.complete all as specified ad directed. |
| 161 | All as per item No.158 but for 2 Run x 4 Sqmm with 1 run x 4 sqmm as earth continuity and one run of PVC conduit shall be measured as one unit.complete all as specified ad directed. |
| 162 | All as per item No.158 but for 2 Run x 2.5 Sqmm with 1 run x 2.5 sqmm as earth continuity and one run of PVC conduit shall be measured as one unit complete all as specified ad directed. |
| 163 | All as per item No.158 but for 2 Run x 1.5 Sqmm with 1 run x 1.5 sqmm as earth continuity and one run of PVC conduit shall be measured as one unit complete all as specified ad directed. |
| 164 | Supply and fixsuitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20Amps, 10KA \"C \"series, 230 Volts,50Hzsuitable for AC\"s/Geysers complete all as specified and directed. |
| 165 | Supply and fixMCCB,125 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washersand including removing old unserviceable itemcomplete all as specified and as directed. |
| 166 | Taking down old unserviceable ceilingfans of any type/sweep from work site and deposit to MES store yard supply and fixnew ceiling fan with blades, down rods, and connected accessories, 230 V, 1400 mm sweep,copper winding with squirrel cage induction motor, anti dust painted, dust free,high speed. Star ratedcomplete all as specified and directed. |
| 167 | Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixingexhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 200- 250 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed. |
| 168 | Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steelbody AC single phase.230Volts of size 300 mm sweep with blades and frame with louvers complete all as specified and directed. |
| 169 | Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres belowground level, connected to and including galvanised iron strip of size 32 X 6 mmfrom earth electrodeto test point or up to 7.5mtr whichever is less by means of GIbolts, nuts, check nuts and washersall as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value completeall as specified and directed. |
| 170 | S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN,telephone and TV connections cablesincluding cutting,chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed. |
| 171 | Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 200 to 450 mm sweep exhaust fan including providingnut,bolt and washers after grouting in PCC and including 3 mm dia 5 cm apreature size GI jali and properaluminium frameto avoid insect protection fix at inner surface of wall andmaking good the disturbed surface area complete all as specified and directed. |
| 172 | Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and supply and fixingsmart electric meter single phase four wire energy meteras per BIS -16444 2015 (Reaffermid 2020), ISI marked in existing board /floor panel having current range 10-60 Amps,240 Volts, accuracy class 1.0 and including providing necessary items for functioning complete all as specified and directed. |
| 173 | Supply and fix inrepairs thermoplastic box of size 217 mm X 253 mm X115 mm(L X B X H)confirming to IP -65 with transparent lid hinged door, mounting plate,DIN rail with fastening screws and other necessary accessories complete and fixing on wall for housing KHW meterand including removing of old unserviceable item complete all as specified and directed . |
| 174 | Supply and fixing TVsockets one module with top cover plate and inner frameincluding all necessary accessories and including removing of old unserviceable item complete all as specified and directed. |
| 175 | Supply and fixing Telephone socket(RJ11) one module with top cover plate and inner frameincluding all necessary accessories and including removing of old unserviceable item complete all as specified and directed. |
| 176 | Supplyand fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including electric connection through PVC conduit in concealed/casing caping in surface from ceiling fan to ceiling roseand including removing old unserviceable item complete all as specified and directed. |
| 177 | Supply and fixing, install, new wall split unit indoor/outdoor of capacity 1.5 TR complete with cordless remote control unit with suitable batteries and remote holder and complete indoor and outdoor units and standard accessories i.e necessary copper tube as per site requirement,necessary suitable three core PVC sheathed copper conductor for inter connections indoor and out door units, drain pipe from indoor unit to outside bldg with minimum 3 star ratingcomplete all as specified and directed. |
| 178 | Supply and fixVoltage stabilizer for automatic operation,single phase,digital display type, naturally air cooled indoor type & designed for input variation between 130 volts to 280 volts with out voltage stabilized at20 volts with accuracy of± 2.5%and of capacity 4.0 KVAcomplete all as specified and directed. |
| 179 | Supplying and laying of CPVC /UPVC pipes SDR 11 & Plain SDR 11 incl allfittings ( bens, Tee, long bend, coupling,short pieces etc) of outer dia 32 -40 mm laying in floors/in walls /in trenches etc with clampingcomplete all as specified |
| 180 | Supply and fixingheavy duty MS wall bracketsuitable for fixing of out door unit of split type AC\"swith necessary nuts, bolts & washers complete all as specified and directed |
| 181 | Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 35 sqmm ,3.5 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testingand including removing old unsv UG cables complete all as specified and directed. |
| 182 | Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed. |
| 183 | Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portioncoping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washingmade by the contractor costdeemed intoquoted rete only. |
| 184 | Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I complete all as specified and directed. |
| 185 | Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all asspecified and directed. |
| 186 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed |
| 187 | Removing excavated soil not exc50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed |
| 188 | M & L for brick sub class \"B\" 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cablecomplete all as specified and directed. |
| 189 | Material & labour for GI pipe 50 mm \"light grade\" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
