Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-01-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-01-2026 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles and removal of debris/rubbish off the premises etc complete all as specified and directed. |
| 4 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) and removal of rubbish beyond MOD land complete all as specified and directed. |
| 6 | Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/clips, rubbish off the premises complete all as specified and directed. |
| 7 | Demolition of cement concrete unreinforced of any description and in any position not specifically providedand removal of rubbish beyond MOD land complete all as specified and directed. |
| 8 | Demolition of cement concrete Roofs, Floors (other than ground floor), beams staricase, landing, chajja and similar suspended work complete all as specified and directed |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed. |
| 10 | Dismantlingof Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, and removal of rubbish complete all as specified and directed. |
| 11 | Excavating in trenches n exc 1.5m wide and n exc 1.5m depth for foundation etc or for shafts, well, cesspits, manholes, pier holes, etc n exc 10 sq m on plan in any type of soil, laying of cables , foundation flling of poles or stays complete all as specified and directed. |
| 12 | Returning filling, in including spreading , levelling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed. |
| 13 | Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 14 | S&F Solid PVC door frame of size 50 x 90 mm made out of 5mm wood grain printedPVC sheet& edges shall be painted to matchwith printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 15 | S&F pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats and two coats of synthentic enamel paint complete all as specified and directed. |
| 16 | S&F pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats and two coats of synthentic enamel paint complete all as specified and directed. |
| 17 | S&F factory made solid decorative PVC flush door shutter 30mm thick with integral skin as frame & 5mm thick PVC Sheet high pressure compact laminate on both side of approved colours in fill sanddwich with 20mm thick PVC solid board with C type GI or 40x20x19 of MS pipes stiffer & filling in frame at site complete all as specified and directed. |
| 18 | 35mm thick, Flush shutters soild core construction with block boarde core and plywood face panels, commercial type on both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed. |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat prefinished with UV coating of size 50x100 mm (duble rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant, fixed in position with and including MS hold fast/lugs/SS dash fasteners of required dia and length completeall as specified and directed.Note: (i) For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. (ii) Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 20 | S&F 35mm thick factory made plain framed panelled shutters of2nd class hard wood, two panels with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS-1003 (Part-I),(Larger size to be provided) including a coat of primer including two coat of synthentic enamel paint Kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed. |
| 21 | S&F 35mm thick single piece factory made wire gauge door shutter with wire cloth (steel & aluminium XPM) manufactured by PVC sheets printed 5mm thick on both side on frame made outMS tube 19 SWG of size 19x19 mm with lock rail & beautified by PVC beading all round fixed with PVC solvent cementas per Drg No CESZ/TD-378/Sheet 1/1 dated 27/12/2011complete all as specified & directed. |
| 22 | Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter with CNC cutting of 35mm size prefinished with UV coating comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPCto be laminated with PVC foil minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately). |
| 23 | S&F 18 mm thick HDHMR ( high density high moisture resistance) one side colour laminated as in kitchen cabinet, bed room cup board ward robe, sink/WHB Vanity and like fixed with suitable nails including fixed with suitable edging tape screw to fix with steel/wooden frame complete all as specified and directed. |
| 24 | S&F 05 mm thick HDHMR ( high density high moisture resistance) board as in kitchen cabinet, bed room cup board ward robe and like fixed with suitable nails including fixed with suitable edging tape screw to fix with steel/wooden frame complete all as specified and directed. |
| 25 | S&F Box type Steel windows and ventilators comprised of tubular frameand shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg staydovetailedor welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) applying two coat of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 26 | M&L Framed work such as grills, gratings, cooler/ AC stand, kitchen cupbaord frame manhole\"s cover, ladder and door etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates including pintle hinges, stops, hand-made sliding bolts etc conforming to Fe.290.Gde-E-165 including one coats of primer and two coat of enamel paint complete all as specified and directed . |
| 27 | M&L for preparation old steel or iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paintcomplete all as specified and as directed. |
| 28 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed. |
| 29 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed. |
| 30 | S&F 100 mm size butt hinges (as per sample) medium weight, cold rolled mild steel complete all as specified and directed. |
| 31 | S&F 250 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed. |
| 32 | S&F aluminiumanodized barrel tower bolts 150 mm of extruded section (as per sample) fixed complete all as specified and directed. |
| 33 | S&F for 250 mm long stainless steel , sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding boltsof extruded sections or cast aluminium alloy and fixed complete all as specified and directed |
| 34 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Overall length of cover plate 150mm, fixed in floor complete all as specified & directed. |
| 35 | S&F 150 mm size aluminium alloy handles, febricated type extruded section(as per sample), complete all as specified and directed. |
| 36 | S&F 150 mm size stainless steel handles, febricated type extruded section(as per sample), complete all as specified and directed. |
| 37 | S&F 150mm, ordinary rat tail door springs for door closer, complete all as specified and directed. |
| 38 | S&F 100mm hasp and staples,stainless steel fancy type including bolt to hinge plate and fixed with SS screws complete all as specified and directed. |
| 39 | S&F 25mm bore stainless steel,curtain rod (walls thickness not less than 1mm) including fancy type fixed in postion with PVC plugs & SS screws 75mm as approved by GE complete all as specified and directed. |
| 40 | Brick work with fly ash bricks (Old Size bricks)straight or curved on plan exc 6 mtr mean radius built in CM 1:6complete all as specified and directed. |
| 41 | Brick work with fly ash bricks (Old Size bricks)straight or curved on plan exc 6 mtr mean radius built in CM 1:4complete all as specified and directed. |
| 42 | M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 43 | M&L for rendering 5mm thick plastering in CM 1:3 in on ceiling, soffits of slabs, chajjas, columns and beams etc andfinishing the plastered surface without using extra cement complete all as specified and directed. |
| 44 | M&L for rendering 15 mm thick cemet plster on fair faces of brick work or concrte surfacesin CM 1:4 in two layers (5mm finishing layer over 10mm base layer) finished even and surface without using extra cement with WPC over finishing layercomplete all as specified and directed.Note: WPC shall be measured and paid seperately) |
| 45 | M&L for rendering or plastering 10 mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas,roof projections, drainge etc including taking out peeled off plaster/ concrete and making the edges in line, in true shape and finishing the surface without using extra cement complete all as specified and directed. |
| 46 | M&L forapplying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 47 | M&L for preparation of newly plastered surface ofwall and applying two coats of oil bound distemper over a coat of alkali resistance primer paint after applying one coat of cement base wall care putty to wall surface complete all as specified & directed. |
| 48 | M&L for preparation of old plastered surface ofwall and applying two coats of oil bound distemper over a coat of primerafter applying one coat of cement base wall care putty including complete removal of existing treatment complete all as specified & directed. |
| 49 | M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over one coat of alkali resistant primer complete all as specified and directed. |
| 50 | M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and directed. |
| 51 | M&L for three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and as directed. |
| 52 | M&L two caot of white wash on surface of ceiling including preparation of old plastered surface including removal of existing treatment complete all as specified & directed |
| 53 | PCC type C-1, 1:3:6 (using 20mm graded crushedstone aggregate) as in plinth protection 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. |
| 54 | M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqmbut not exceeding 0.11 sqmin floor, skirting etc set and jointed in neat cement slurry and pointed in coloured cementover 15mm thick screed bed or bedding layer of mortar in CM 1:4 inculidng dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing),rubish off the premises, complete all as specified and directed. |
| 55 | M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqm in floors etc set and jointedin neat cement slurry and pointed in whitenor coloured cement to match including over 15mm thick screed bed or bedding layer of mortar in CM 1:4inculidng dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing),rubish off the premises,complete all as specified and directed. |
| 56 | M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqm in floors and skirting etc set and jointedin neat cement slurry including dismantling floor, hearth or wall tiling including 15 mm thick cement mortar (1:4) bedding, complete all as specified and directed. |
| 57 | M&L for glazed ceramic coloured tiles in vertical surface 600x300x7mm thick set and jointedin neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4 including dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing),rubish off the premises complete all as specified and directed. |
| 58 | M&L green Marble work 15-17mm thick (table rubbed and polished) in cooking plateform,window cill, steps, stair case trade & riser etc in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra including dismantiling complete all as specified & directed. |
| 59 | M&L for Round chamfering to the edgesof marble/granite slabs not exc 15 mm wide complete all as specified and directed. |
| 60 | Taking up or down steel water tubing and connections including cleaning for refixing of pipe 20mm bore dia all as specified and directed. |
| 61 | All as per item No 60 here above but 15 mm bore |
| 62 | M&L for cutting chases, pinning in brick work,making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed. |
| 63 | S&F20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed. |
| 64 | S&F15mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed. |
| 65 | S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy capston head chromium plated (as per sample), fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed. |
| 66 | S&F in repairs Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch lever handle screwed both ends for iron pipe 15mm bore dia fixed in repair, complete all as specified and directed. |
| 67 | S&F in repair 15mm bore dia Bib taps, cast copper alloy, chromium plated fancy typeISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed. |
| 68 | S&F in repair towel rail, brass, CP 600 mm long 20mm dia pipe of 1mm thick complete all as specified and directed. |
| 69 | S&F peg stay 6 hook as per sample complete all as specified and directed. |
| 70 | S&F in repair toilet paper holder with flash recessed type of stainless steel/CP fixed to walls chromium plated brass screwscomplete all as specified and directed. |
| 71 | S & F in repair brass CP Shower rose with or without swivel joints,(any size) including fixing to steel pipe or union complete all as specified & directed. |
| 72 | S&F in repairsstainless steel Grating doom 100 mm dia without hole fixed in floors complete all as specified and directed. |
| 73 | S&F in repairsstainless steel Grating doom 100 mm dia with hole fixed in floors complete all as specified and directed. |
| 74 | S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide (as per sample) with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed. |
| 75 | S&Fin repair 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 76 | S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern(including fixingofflush pipe) including provision of cement concrete bedding, in repair complete all as specified & directed. |
| 77 | S&F in repairVitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing thereof),including making connections to trap, and to flush pipe including plastic seat and cover with stainless steel or aluminised hinging device and fixed complete all as specified and directed. |
| 78 | S&F in repairVitreous china wash basin, white flat back, size 550 x 400 mm (as per sample), brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting standincluding 32 mm diawaste pipe complete all as specified and directed. |
| 79 | S&F in repairs 15mm bore pillar tap, copper alloy with capstan head, chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe (fixed in repairs), complete all as specified and directed. |
| 80 | S&F Health foucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube an ABS wall hook and making connection including making connections and fixed in position complete all as specified & directed. |
| 81 | S & F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC,complete all as specified and directed. |
| 82 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 83 | S&F in repairs PVC waste pipe , 32 mm dia, suitable for WHBS/Sinks included threaded PVC socket suitable for shank of waste coupling complete all as specified and directed |
| 84 | Rotational moulded polyethlene water storage tanks of capacity exc 500 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing RCC/PVC tank of any capacity complete all as specified & directed. |
| 85 | Rotational moulded polyethlene water storage tanks of capacity exc 1000 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing RCC or PVC tank, complete all as specified & directed. |
| 86 | S&F in repair ball valvehigh pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed (Miniumum weight 15mm-142 gms/ Miniumum weight 20mm-210/ Miniumum weight 25mm-455 gms/ Miniumum weight /40mm-690 gms ) etc complete, fixed in repair all as specified & directed. |
| 87 | S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixedcast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed. |
| 88 | S&F in repair corner glass shelf assembly (as per sample) consisting of 5.5mm thick sheet glass size not less then 300x300x70mm with chromium plated brackets double guard and railing complete all as specified and directed. |
| 89 | S&Fkitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers , PVC waste pipefixed in repair including waste copling; bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495x420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 90 | S&F stainless steel soap dish fixed to plugs chromium plated brass screws complete all as specified and directed. |
| 91 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etcincluding cleaning or refixing or removal to store complete all as specified and directed. |
| 92 | S&F in repair 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls with clamps, complete all as specified and directed. |
| 93 | S&F in repair 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls with clamps, complete all as specified and directed. |
| 94 | S&F in repair 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches with clamps, complete all as specified and directed. |
| 95 | S&F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including clamps complete all as specified & directed. |
| 96 | S&F in repair 110mm bore dia PVC (SWR) reducers, complete all as specified and directed. |
| 97 | S&F in repair 110mm bore dia PVC (SWR) bends,any radius (larger bore measured), complete all as specified and directed. |
| 98 | S&F in repair 75mm bore dia PVC (SWR) bends,any radius (larger bore measured), complete all as specified and directed. |
| 99 | S&F in repair 110mm bore dia PVC (SWR) branch piece, single (single Y) equal or unequal with parrallel branches fitted with oval access doors, fixed in repairs complete all as specified and directed. |
| 100 | S&F in repair cast iron 75mm bore PVC (SWR) Branch pieces, double (double Y), equal or unequal, ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors complete all as specified and directed. |
| 101 | S&F in repair PVC (SWR) 110mm bore junction single, (Single T) equal or unequal with acces door complete all as specified and directed. |
| 102 | S&F in repair 75mm bore pipe PVC (SWR) vent cowl, fixed in repair, complete all as specified and directed. |
| 103 | S&F in PVC floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed. |
| 104 | Surface excavation n.exc 30cm deep and averaging 15cm deep and geeting out complete all as specified and directed. |
| 105 | M&L for 100mm thick lean PCC 1:3:6 type C-2 using (40mm graded crushedstone aggregate) asin a sub bases finsihedcomplete all as specified and directed. |
| 106 | M&L for Reinforced cement concrete (nominal mix) in 1:1.5:3 type A-1 using 20mm graded crushedstone aggregate in slabs supported on walls, beams and columns in floors, shelves, platform,lintel, chajja incluidng form workcomplete all as specified and directed. |
| 107 | M&L for Sand filling under floors or in foundation in layers n exc 25mm thickincluding watering and consolidation complete all as specified and directed. |
| 108 | M&L for 60mm thickness M-35 grade Machine pressed precast concrete factory madepaver block confirming to IS-15658-2006 (topping thickness not less than 5mm thick with white cement and colour pigment non fadable epoxy coating) complete all as specified & directed. |
| 109 | M&L forPCC 1:2:4 Type B1 (using 20 mm graded crushedstone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching to manholes, kneelers, apex stones,bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed |
| 110 | M&L forPCC 1:2:4 type B-0 ( using 12.5mm graded crushedstone aggregate) padding as roof , surface finished even and smooth without using extra cement complete all as specified and directed. |
| 111 | M&L 20 mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately) |
| 112 | M&L for preparation of surfaces and apply first coat fiber reinforced elastomatic liquid water proofing membrane formulated with PU hybrid ploymersand reinfoecing acrylic fibers with sun reflective index(SRI) of 100-110 having maximumelongation of 350% tensile strength od 2.9 Mpa and shall have crack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic presure and reduce surface temprerature upto 10 degree celsius with 33% ditution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 grm/sqm and pastinf it properly with overlaping of 50mm and allow it to dry, Apply second coat of undiluted coat @ 0.45 ltr/ Sqm . Apply third and final coat undiluted @ 0.45 ltr/sqm complete application to be done by the manufacture of authorised applicator complete all as specified and directed. |
| 113 | Note for item No 112 :-(a) Cleaning of dust, removal for all loose existing bituminous material manually with heat torch gun to get smooth plain finished surface, removing of vegetation/plantaion with no loose material on surface.(b) Conduct ponding test after 7 days, continnue curing of 14 days.(c) All Shifting/ removing of any wire/cable/AC unit/Water tank of any capacity or other any object as per site requirement an re-fixing the same, if needed shall deemed to be included in the quoted rates by the contractor. (d) Removal of any loose/packed items such as mud phuska, terrace tiles, cement screed bed shall be removed and surface shall be made free from depressions before applying treatment to the roof. Quoted rates shall deemed to be includedthis fact into account and no extra payment shall be made on this account. (e) Contractor shall verify availability of the materials in full qty from market before quoting the rates as no extension of time on this ground shall be granted.(f) All the sample/ make for water proofing material mentioned in item shall be got approved from the GE before procuring bulk quantity of material. |
| 114 | Supply only liquid water proofing compoundcomplete all as specified and directed. |
| 115 | S&F Non asbestos fibre cement boards 6mm thick in ceiling fixed or laid on MS frame work with drilling screws fixed using T grid /Cross-T / Wall angle / Level clip & suspenders including taking down existing ceiling board & grid work etc of any type of pattern complete. |
| 116 | MS work for angles/tees for false ceiling , drilled and countersunk for screw , including bending and welding angles ,as necessary , gusset plates, riveting, etc., conforming to FE290 Gde-165complete allas specified and directed. |
| 117 | M&L for cutting holes for inserting angle iron/Tee into brick / Stone walls into or through brick wall built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I as required. |
| 118 | S&F Mild steelTMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. |
| 119 | S&F Mild steelTMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. |
| 120 | S&F Steel work in tubular trusses includingspecial shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 gradeSt.-240painedwith one shop coat of zinc chromate primer paint incluidng preparation of surface at Contractor\"s workshop before fabrication complete all as specified & directed. |
| 121 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed. |
| 122 | LLDPE Septic Tank, designed to carry sewage and sullage water, capacity 2000 ltrs wall thickness 8-10mm and features like UV stabilisation, crack resistance, manhole access durable, air vent system etc. excavation and earth work in ay type of soil, PCC 1:4:8 below foundation, bent shaft,connection etccomplete all as specified and directed. |
| 123 | M&L for Soakage well of size 1.8m dia, 3.0m effective depth including excavaion and earth work in any type of soil, PCC 1;3;6 type C2 foundation, Honey combing walls in CM 1:4, lintle band, RCC slab in M25, SFRC cover, interconnecting pipes or RCC connection etc, filled with brick bats complete all as specified and shown on drawing No CEPZ/C-TD/013/13 sheet 1/5 to 5/5.Note: TD drawing shall be supplied by the Engineer in Charge. |
| 124 | M&L for Soakage well of size 3.6m dia, 4.5 m depth as per Drawing CEPZ/C-TD/13/13 SHEET 1/1 to 5/5 excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry in CM 1:4 with top ring of M-25 design mix concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:6, RCC cover slab in M-25 SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats complete all as specified and directed. |
| 125 | M&L for providing Plain cement concrete C-2, 1:3:6, using 40 mm graded crushedstone aggregate as in Concrete bed todrain pipes upto 200 boreincluding packing under and haunching against the sides of pipes after they are laid and tested; in cement conctrete typecomplete all as specified & directed. |
| 126 | M&L for providing Plain cement concrete C-2, 1:3:6, using 40 mm graded crushedstone aggregate as in Concrete bed todrain pipes upto 150 boreincluding packing under and haunching against the sides of pipes after they are laid and tested; in cement conctrete typecomplete all as specified & directed. |
| 127 | M&L for reinforced concrete pipes 200mm, classs NP3, laid and jointed complete with collars complete all as specified and directed. |
| 128 | M&L for reinforced concrete pipes 150mm, classs NP3, laid and jointed complete with collars complete all as specified and directed. |
| 129 | Cutting into existing manholes for connecting new drains for ineternal dia of pipe 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. |
| 130 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushedstone aggregate) as in foundation, filling and mass concretecomplete all as specified and directed. |
| 131 | M&L for Rendering 15mm thick on stone wall sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 132 | M&L for precast RCC 1:2:4 TYPE B-1 as in manhole/ drain covers reinforced with steel bars complete all as specified and directed. |
| 133 | M&L forPCC 1:3:6 Type C-1 (using 20 mm graded crushedstone aggregate) as in copings, benching to manholes, kneelers, apex stones, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed |
| 134 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixturesuch as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 135 | M&L for point wiringusing 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with and including 1.2mm thick GI/MS pressed steel sunken box of pressed steel sunken boxes of adequate size,3mm thick plastic laminated sheet cover fixed with brass screws including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. Note:- 1) Conduit shall be fixed on surface/ceiling with necessay saddles where concealing of conduit is not feasible.2) Rate of supplying and fixing modular GI/MS pressed sunken box with support frame deemed to be included in the quoted rates. |
| 136 | All as per Ser item No 134 but for one5/6 Amp socket outlet point on same board controlled by one switch. |
| 137 | All as per Ser item No 134 but for one light point controlled bytwo 2 way switch. |
| 138 | All as per Ser item No 134 but for one5/6 Amp socket outlet points on independentboard controlled by one switch. |
| 139 | All as per Srl item No 134 here-in-before for one 15/16 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor. |
| 140 | S&F switch piano flush button single pole one way 5/6 Amp 240 volts complete all as specified and as directed. |
| 141 | S&F socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type with shutters, 240 volts complete all as specified and as directed. |
| 142 | S&F socket outlet 2 in 1, 6 pin, 6/16 Amp flush type, 240 volts complete all as specified and as directed. |
| 143 | S&F switch 15/16 Amps, flush type, 240 volts complete all as specified and as directed. |
| 144 | S&F switch piano flush button single pole two way 16 Amp 240 volts complete all as specified and as directed. |
| 145 | S&F stepped type electronic fan regulator flush type Socket type on the existing phenolic laminated sheet etc. not less than 100 W flush type complete all as specified and directed. |
| 146 | S&F ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals. |
| 147 | S&FLamp holder jumbo modular type, PVC/Polycarbonate type with back plate suitable for batten fitting including 15 W LED lamp complete all as specified. |
| 148 | M & L for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 25mm dia 1.5mm thickwith all accessories incl cutting chases on wall andmaking good to the disturbed surface of wall/floor with cement mortar 1:4 and finishes to match existing surface complete all as specified and directed. |
| 149 | Disconneting & taking down ceiling fan / exhaust fan any type/ cap refixing to the same/other location after replacing rubber reel, fixing bolts and nuts with lock pins, connectors complete all as specified and directed. |
| 150 | Disconneting & taking down geyser any type/capacity complete,refixing to the same/other location with all connected accessories afer cleaning replacing anchor bolts complete all as specified and directed. |
| 151 | S&F 20W surface / wall mounted box type batten LED fitting having polycarbonate housing and diffuser and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. |
| 152 | All as per ser item No 150 but for 10 W LED batten fitting 2 feet long. |
| 153 | S&Fsurface mounted, bulk head LED luminaire 10 W with and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V, IP 65 protectioncomplete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. |
| 154 | S&F LED wall security lights of 35 Watthaving pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W,IP65 protection, IK07 rating,inbuilt electronic driver withPF>0.95 incl GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. |
| 155 | MCB DB, SPN, 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wallincluding cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 156 | MCB DB, SPN, 4 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wallincluding cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 157 | MCB DB, SPN, 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wallincluding cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 158 | S&F MCB SP 240V, 50Hz of rating6 to 32 Amp, \"B\" curve using suitable size copper thimbles complete all as specified and directed. |
| 159 | All as per Ser item No 160 but for size 32/40/63 Amps MCB SPN. |
| 160 | Supply, laying and testing insulated, screened, PVC beded galvansized steel strip or wire armoured, electric cable heavy duty 1100 volts gradewith stranded aluminium conductor of size 16 Sqmm 2 core complete all as specified and directed. |
| 161 | Supply, laying in trenches or fixing to wall/pole or passing through pipe and testing PVC insulated XLPE heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 6 Sqmm 2 core including making good all distributed wall surfaces/ flooring/tilling/road to match with existing specifications complete all as specified and directed. |
| 162 | All as per Srl item No 160 abvoe but size 16 Sqmm 2 core. |
| 163 | M&L for sand filling in trenches as cushion to under ground cables 8 cm thick before laying the cable and 15 cm thick when cables are laid and tested complete all as specified and directed. Note: Only punned thickness i.e 18cm shall be measured and paid. |
| 164 | 40mm dia GI tubing, light grade with all fitting laid in trenches or fixed on wall/under road/ floor or pole by means of GI/MS clamps, nut bolts and washers complete all as specified and directed. |
| 165 | M&L for Sub class ‘B’ bricks old size laid dry, flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed. |
| 166 | M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit alongwith angel iron 40x40x3mm frame and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 3 of SSR part I or directedand testing on completion. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
