|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in -charge. |
| 2 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 4 | Of area 3 sq. metres and below |
| 5 | Of area beyond 3 sq.metres |
| 6 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: |
| 7 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 10 | Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
| 11 | Columns, piers, abutments, pillars, posts and struts |
| 12 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 13 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 14 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed torequired colour or shade, with nuts and screws etc. complete: |
| 15 | 250x16 mm |
| 16 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: |
| 17 | 200x10mm |
| 18 | 150x10mm |
| 19 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: |
| 20 | 125 mm |
| 21 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 22 | 10 x 80 mm |
| 23 | Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with : |
| 24 | 4.0 mm thick glass panes |
| 25 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% andbconforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 26 | Size of Tile 600 x 600 mm |
| 27 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 28 | Size of Tile 600 x 600 mm |
| 29 | 12 mm cement plaster: |
| 30 | 1:4 (1 cement : 4 fine sand) |
| 31 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : |
| 32 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 33 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 34 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 36 | Two or more coats on new work |
| 37 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram/litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour |
| 38 | Old work (one or more coats) |
| 39 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 40 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 41 | White washing with lime to give an even shade |
| 42 | Old work (one or more coats) |
| 43 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 44 | One or more coats on old work |
| 45 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 46 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 47 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 48 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 49 | Constructing manhole with Cement Concrete 1:3:6 (1 : Cement : 3 Coarse sand : 6 Graded stone aggregate 40 mm nominal size) RCC top slab with 1:1.5:3 mix (1 : Cement : 1.5 Coarse sand : 3 Graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 mix (1 : Cement : 4 Coarse sand : 8 Graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 : Cement : 3 Coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 : Cement : 2 Coarse sand : 4 Graded stone aggregatee 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. |
| 50 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg): |
| 51 | Constructing soak pit 1.20 x 1.20 x 1.20 m filled withbuilbing rubbish, domolished concrete waste materials includinguPVC pipe 110mm dia and 1.20 m long complete as per standard design. |
| 52 | Providing and fixng soil, waste and vent UPVC pipe conforming to HSN code 3917 single socket type- B, including solvent joint etc, Complete as per the direction of Engineer-in-charge. |
| 53 | 110mm dia |
| 54 | Providing and fixing UPVC (SWR) moulded fitting/ accessories conforming to HSN code 391740 including joint with solvent etc, Complete as per the direction of Engineer-in-charge. |
| 55 | Plain bend of required degree 110 mm |
| 56 | Providingwoodworkinframesofdoors,windows,clerestorywindowsand other frames, wrought framed and fixedinposition with hold fast lugs orwith dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
| 57 | With kiln seasoned and chemically treated Superior Hardwood Cat-II (A) |
| 58 | Providing and fixing 35 mm thick glazed shutters for doors,windows and clerestory windows using 4 mm thick glass panes including wooden beading and aluminiumbutt hinges of required size with necessary screws |
| 59 | With kiln seasoned and chemically treated Superior Hardwood Cat-II (A) |
