|
| 1 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonryand removal complete all as specified & directed. |
| 2 | M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 3 | M&L Brick work with FLY ASHbrick straight or curved on plan to any radius in half brick thick walls built inCM 1:4 complete all as specified & directed |
| 4 | Demolition of cement concrete (un-reinforced) in ground floor and paving n. exc.15cm thickness(below or above ground level.) & removal of rubbish material complete all as specified & directed |
| 5 | M&L for PCC (1:2:4) type B-1 (using20mm graded stone aggregate), 25mm thick, as in Sub base complete all as specified & directed by Engr-in-Charge. |
| 6 | Dismantling floor , hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed. |
| 7 | M&L non skid ceramic tiles colored 300x300x7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified & directed. |
| 8 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. |
| 9 | M&L Glazed ceramic coloured tiles in vertical surface450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed. |
| 10 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in wall, dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 10 mm thick rendring in cm 1:4 complete all as specified & directed. |
| 11 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types andover screed bed 20 mm thick CM1:6 cement concrete complete all as specified & directed. |
| 12 | M&L machine cut kota stone slab flooring 18-20mm thick over20 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed |
| 13 | M&L machine cut kota stone slab 18-20mm thick in steps for riser, dado, skirting, wall etc over20 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified& directed |
| 14 | M&L 50 mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified & directed. |
| 15 | Demolition of cement concrete (un-reinforced) in ground floor and paving. exc. 15 cm thick above ground level & removal of rubbish material all as specified & directed. |
| 16 | M&L 60mm thick machine pressed precast conctete interlocking paver block of glosy finished with grey cement andpigment any shape and size confirming to IS 15658-2006 , M-35 Grade and over 25mm thick sand complete all as specified and as directed. |
| 17 | M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded aggregate as in sub base of path/hardstanding complete all as specified & directed. |
| 18 | Dismanltingof kerb stoneincluding cement bedding & removed off rubble complete all as specified & directed. |
| 19 | M&LPrecast cement concrete solid blockfactory made as in curve stone in PCC 1:2:4 type B-1 using (20 mm graded stone aggregates) set in CM 1:6 (sizeof precast concrete blockcomplete all as specified & directed by Engr-in-Charge. |
| 20 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed. |
| 21 | M&L rendering 10mm thick in cement mortar 1:6 on fair faces of stone masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified & directed. |
| 22 | M&L for rendering 15mm thick in CM 1:4 on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) complete all as specified & directed. |
| 23 | Supply only Integral waterproofing compound complete all as specified & directed. |
| 24 | M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified & directed. |
| 25 | M&L for Rough cast plaster on exterior wallsapplying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even.The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed. |
| 26 | M&L forpreparation ofnew plastered surfaces of wall and applyingtwo coats of weather proof exterior emulsion paint (Apex Ultima or equivalent) overone coat of primer over 1 mm thick wall care puttycomplete approved shade/tint complete all as specified & as directed. |
| 27 | M&L for preparation of new plastered surfaces of walls and applying two coats of Oil bounddistemper overa coat of 1 mm thick wall care putty of approved tint complete all as specified & directed |
| 28 | M&L preparation of new plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified and directed. |
| 29 | M&L preparation of old decorated surfaces of walls, plastered including cornices, pilasters etc and applying one coats of white wash complete all as specified and directed. |
| 30 | M & Ltwo coat of weather existerior paintfor over a coat of primeron to wall including one coats of wall care putty of 1 mm thick to obtained smooth surfaces andcomplete removal of existing trement from wall complete all as specified and directed. |
| 31 | M & L for complete removal of existing treatment on walls applyingtwo coatsof oil bound distemperover a coat of 1mm thick wall care putty complete all as specified and directed. |
| 32 | M&Lfor preparation of old plastered surfaces & applyingone coat of white wash on ceiling complete all as specified & directed. |
| 33 | Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame) n exc 1.5 sq.each & removing to store. |
| 34 | Taking down Chowkatts or frameswith shutters ( without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each & removing to store complete all as specified and directed. |
| 35 | S&F 35mm thick IInd class hard wood factory made panelled door shutter(two panel) with lock rail and panelof 9mmBWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified and directed. |
| 36 | S&F 35 mm thick 2nd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 37 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 38 | M&L Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified & directed. |
| 39 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed |
| 40 | M&L for preparation of old wooden surfaces over 10cm width or girth andapplying one coat of synthetic enamal paint (of approved shade) complete all as specified & directed |
| 41 | S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed. |
| 42 | S&F Butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified & directed |
| 43 | S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed |
| 44 | S&F 150mm Aluminium handles, cast type, anodised complete all as specified & directed |
| 45 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedcomplete all as specified & directed |
| 46 | S&F in repair stainless steel drapery rod 25mm dia (in lengths directed) of approved colour with and including decorative bowel at both ends and pair of power coated stainlesssteel brackets fixed at both ends with pvc Rawl plug and steel screwed on walls/beamcomplete all as specified & directed |
| 47 | S & F 300mm Helical/rat tail door Spring 300mm size with MS sheet wing pattern including roller plate complete all as specified and directed. |
| 48 | Preparation of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 49 | Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 50 | S&F MS steel work in tubulartrusses and tubular posts, purline, rafter including special shaped washers etc., complete using but welded.RHS/SHSconfirming to IS 4923 : 1997 complete all as specified & directed |
| 51 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.Fe-410 (Gde-E250 quality A). |
| 52 | M&L Flat iron hold fast 25mm x 6mm welded to angle iron door frame complete all as specified and directed. |
| 53 | M&L for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachmentFe 410 W (Gde E-250) Quality B, complete all as specified & directed. |
| 54 | Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 55 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed |
| 56 | S&FPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etccomplete all as specified & directed |
| 57 | S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. |
| 58 | S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. |
| 59 | S&F forpowder coated of any colour as approved anodised aluminium grill of approved pattern for windows/ ventilators/doors complete all as specified and directed. |
| 60 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 61 | S&F sheet glass ordinary quality,in squares n. exc. 0.5 SQM each 4.80 mm thick complete all as specified and directed. |
| 62 | Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 63 | Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 64 | S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed |
| 65 | S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed |
| 66 | S&F in repair Rotational moulded polyethylene water storage tanks (white colour) (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position all as specified in SSR Part I including dismantaling existing water tanks and removing to store, complete all as specified and directed. |
| 67 | S&F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms of including taking down existing ball valves any typeall as directed |
| 68 | S&F in repairs brass Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 69 | S/F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed |
| 70 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed. |
| 71 | S&F in repairs vitreous china wash basin white of size 550x400mm (ISI marked) flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed. |
| 72 | S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve,float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC complete all as specified and directed. |
| 73 | S&F in repairs.sink with draining board made out of stainless steel 1mm thick sheet for kitchen with plug, washers, waste pipe, cast iron centilever bracket, connecting union over all minimum size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and directed |
| 74 | S&F in repairs PVC connection of 15mm bore with2 Nos. PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe complete all as specified and directed. |
| 75 | Supply and fixing in repairs MS grating CP 100mm dia, with or without hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as specified and directed. |
| 76 | S&F in repair fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified & directed |
| 77 | S&F in repairs Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or withoutlettered \"Hot\" or \"Cold\" with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified includingtaking down existing pillar tap and removing the same to store complete all as specified and directed. |
| 78 | S&F in repair Stop/angle valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm diacomplete all as specified & directed |
| 79 | S&F in repair Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed. |
| 80 | S&F in repairs looking mirror 600x450mm bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washeres complete all as specified and directed. |
| 81 | S&F in repairs brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all complete all as specified and directed. |
| 82 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and directed. |
| 83 | S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floorscomplete all as specified & directed |
| 84 | S&Fin repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed |
| 85 | S&Fin repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls/floorcomplete all as specified & directed |
| 86 | S&F in repair PVC (SWR) bends any radius 110 mm borecomplete all as specified & directed |
| 87 | S&F PVC (SWR) vent cowl 110mmcomplete all as specified & directed |
| 88 | S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed |
| 89 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified & directed |
| 90 | S&Fin repair PVC (SWR),110mmjunction single, (Single T) equal or unequalcomplete all as specified & directed |
| 91 | M&L writing letters or figures(Block,roman,Italic or Indian letter n.exc 30cm high) complete all as specified and directed. |
| 92 | S&F brass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified and directed. |
| 93 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets and removing from site complete all as specified and directed. |
| 94 | M&L False ceiling with ArmGyp-FB ceiling tiles of premium quality of size 595 x 595 (as approved by GE) fixed with and including galvanised iron powder coatedinverted \"T\" or \"L\" section (concealed GI frame work) of mettalic or equivalent suspended from ceiling with provn of galvanisedwire 4 mm dia and wall taping screw including butterfly clip, hold down clips for fixing the board to frame complete all as per manufacurers instructions all as directedand specified. (a) size of main tee 39 x 24.4 x 0.8 mm (b) size of wall angle 22.2 x 22.2 x 0.65 mm(c) size of grid 0.61 x 0.61 mm complete all as specified and directed. |
| 95 | Demolition Mud in roofs, any thicknes, including plastering, existing tretement and cleaning (whether full thickness removed or only or part there of)etcin all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed |
| 96 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding,laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted inmin slope 1:30 over roof complete all as specified & directed. |
| 97 | M&L screed laid 15mm thick in CM 1:4with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified & directed |
| 98 | M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. mincluding cleaning surfacesover bituminious primer complete all as specified & directed |
| 99 | M&LAPP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 100 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed |
| 101 | M&L 150 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed |
| 102 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil complete all as specified and directed. |
| 103 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed. |
| 104 | Removing excavated material, n. exc 50M and depositing where directed at a livel n. exc 1.5M above the starting pointat the descriation of contractor complete all as specified and directed. |
| 105 | M&L for plain cement concrete 1:4:8 type D-2 (40 mm graded stone aggt) as in foundations, filling & mass concrete complete all as specified and directed. |
| 106 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed blocks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified and directed. |
| 107 | S&F for 50mm thick steel fibre reinforced (SFRC) manhole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 3 ton /Sqm in square rectangular or Circular shape complete all as specified and directed |
| 108 | Surface dressing n exc 30cm deep and and averaginging 15cm deep and getting out soft soil complete all as specified and directed |
| 109 | M&L for hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 110 | M&L for PCC Type D2 1:4:8 (40 mm graded stone aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed |
| 111 | M&L for PCC (1:2:4) type B-1 (using20mm graded stone aggregate), 25mm thick, as in Sub base complete all as specified & directed |
| 112 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paintof approved shade/tint complete all as specified & directed |
| 113 | M&L for preparation of newly plastered surfaces of wall and applyingthree coats of white wash complete all as specified & directed. |
| 114 | S&F Grating doom 100 mm dia of PTMT (Minimum weight 25 gms)fixed with cementcomplete all as specified & directed |
| 115 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floor/fixed to walls complete all as specified & directed |
| 116 | S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors/wall complete all as specified and directed. |
| 117 | S&F PVC (SWR) bends 110mm dia any radius complete all as specified and directed. |
| 118 | S&F PVC (SWR) junction single (Single T) equal or unequal with access door 110mm dia complete all as specified and directed. |
| 119 | S&F Stop/angle valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm diacomplete all as specified & directed |
| 120 | S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I |
| 121 | S&F Ball brass valves, high pressure,20mm bore, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in position complete all as specified and directed. |
| 122 | S&F 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & as directed. |
| 123 | S&F 15mm dia PVC connecting pipe 450mm long with PTMT nuts of suitable size at both ends complete all as specified & as directed. |
| 124 | S&F Vitreous China Squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rests connection to trap and to flushing pipe,etc.complete including making food to floor complete all as specified & directed by Engr-in-Charge. |
| 125 | S&FPVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve,float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC make Dolfine/Commander Champion complete all as specified and directed. |
| 126 | S&F in Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but including brackets completeall as specified and directed. |
| 127 | S&FPillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or withoutlettered \"Hot\" or \"Cold\" with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified includingtaking down existing pillar tap and removing the same to store complete all as specified and directed. |
| 128 | S&F mild steel TMT bars 10 mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clipscomplete complete all as specified and directed. |
| 129 | Form work to soffits of suspended slabs and similar works not exc. 200mm thicksurfaces of concrete complete all as specified and directed. |
| 130 | M&L for RCC Type B0 1:2:4(12.5mm gradedaggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed by Engr-in-Charge. |
| 131 | Excavation in post holes in soft loose soil (similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth aroundin layers not exc 25cm, watering and removing surplush soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 132 | M&L for PCC Type C2 1:3:6 (40 mm graded aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed |
| 133 | M&L for Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410 W (Gde E-250) Quality B, complete all as specified & directed |
| 134 | S&F for Mild steel screw boltsdia of Neck 5mm to 10mm(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long complete all as specified and directed. |
| 135 | M&L cement concrete 100mm thick 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified & directed. |
| 136 | M & L for Machine pressed precast conctete interlocking paver block80 mm thickness of glosy finished coloured any shape and sizewith grey cement and pigment confirming to IS 15658-2006, M-35 Grade and over 25mm thick sand cushioning laid complete all as specified and as directed |
| 137 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 138 | Taking down UnserviceableDB TPN/SPN any type any capacity complete and making good to disturbed surfaces of wall complete all as specified and directed. |
| 139 | M&L for point wiring for One light/fan point controlled by one switch 1100 Volts grade 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistrandedcopper conductor conforming to IS:694:1990 with ISI marking in and including concealed PVC conduit of suitable size with all accessoriesin wall/ceiling /floor/roofetc, sunk pressed steel or cast iron terminal boxes with 3mm thick plastic laminated sheet top cover including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earthwire connected to common earth dolly complete all as specified and directed. |
| 140 | All as per srl item No 139.00 but for One 3 pin 5 amp socket outlet on independent board |
| 141 | All as per srl item No 139.00 but for one three pin socket outlet 5 amps on the same board |
| 142 | All as per srl item No 139.00 but for One bell/buzzer point controlled by one push button independent |
| 143 | M&L for point wiring complete for one socket outlet 15 amps on an independent board with FRLS, PVC insulated and unsheathed cable 2.5 Sqmm (nominal area) multi stranded copper conductor single core conforming to IS: 694 including concealed PVC conduit of suitable size, pressed steelterminal boxes not less than 2 mm thick of required size (factory made) includingpainting terminal boxes inside and outside with two coats of synthetic enamel paint over a coat of red oxide primer and with top cover 3mm thick of plastic laminated sheets of required colour, complete with all accessories and all as specified including FRLS PVC insulated and unsheathed cable 2.5 Sqmm (nominal area) multi stranded copper conductor single core conforming to IS: 694 of green colour as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete and controlled by one 15 Amp switch complete all as specified and directed. |
| 144 | M&L for point wiring complete for one socket outlet 15 amps on an independent board with FRLS, PVC insulated and unsheathed cable 4 Sqmm (nominal area) multi stranded copper conductor single core conforming to IS: 694 including concealed PVC conduit of suitable size pressed steelterminal boxes not less than 2 mm thick of required size (factory made) includingpainting terminal boxes inside and outside with two coats of synthetic enamel paint over a coat of red oxide primer and with top cover 3mm thick of plastic laminated sheets of required colour, complete with all accessories and all as specified including FRLS PVC insulated and unsheathed cable 4 Sqmm (nominal area) multi stranded copper conductor single core conforming to IS: 694 of green colour as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete and controlled by one 15 Amp switch complete all as specified and directed. |
| 145 | Supply and fixceiling fan regulator electronic step type 230 Volts single phase complete all as specified and directed. |
| 146 | Taking down submain wiring cable any number of runs alongwith earth wire from the existing concealed or surface conduit and offering credit as per schedule of credit complete all as specified and directed.Note : Any runs of cable and earthwire will be measured as one unit length. |
| 147 | M&L for submain wiring with 4 run of 6 sqmm single core copper conductor PVC insulated cable and 1 run of 6 sqmm single core copper conductor insulated cable as earthing lead drawn throughPVC conduit complete all as specified and directed. Note : 4 run of 6 sqmm cable and 1 run of 6 sqmm cable together will be measured as one unit length. |
| 148 | Supply and fixin repair switch Piano 6 Amps one way flush type, make, ISI marked, complete all as specified and directed. |
| 149 | Supply and fixin repair Bell push, flush type, 5 amp ISI marked, complete all as specified and directed. |
| 150 | Supply and fix switchsocket combination outlet 3 pin 6/16 Amps flush type multipurpose with fuse & neon indicator make ISI marked,complete all as specified and directed. |
| 151 | Supply & Fix ceiling rose surface bakelite 65 x 50 mm three terminal, complete all as specified and directed. |
| 152 | Supply & fix Inverter rechargeable LED batten tube light along with fixture, 3feet long, 1x20 W AC ,Energy saving, back up up to 4 hrs, power ful lithium battery-5600 mah, long battery life-500+ rechage cycle charging time 8-10 hrsincluding LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Halonix, Havells, philips, wipro or equivalent |
| 153 | Supply & fix in repairsLED 10 wattB 22 inverter rechargeable LED T-bulb complete all as specified and directed Make: Philips, Halonix, Havells, wipro or equivalent complete all as specified and directed. |
| 154 | Supply and fixbatten Holder PVC/polycarbonate type with cord grip cap suitable for pendent fittings ISI marked,complete all as specified and directed. |
| 155 | M&L for rewinding ceiling fan 1200/1400mm sweep with super enamalled copper wire of exisiting gauge including insulation material varnishing and drying complete all as specified and directed. |
| 156 | S&F in repairs MCB DB TPN 8 Way double door 415 Volts complete all as specified and directed. |
| 157 | S&F in repairs MCB DB SPN 8 Way double door 240 Volts with 200 amps rated bus bar complete all as specified and directed. |
| 158 | Supply & fix in repairs MCB TPN 63 amp, 230 Volts, Single phase, 10 KA Capacity complete all as specified and directed. |
| 159 | Supply & fix in repairs MCB SPN 40 Amp, 230 Volts, Single phase, 10 KA Capacity complete all as specified and directed. |
| 160 | Supply & fix in repairs MCB SP, 6 to 40 Amps, 230 Volts, Single phase, 10 KA Capacity complete all as specified and directed. |
| 161 | S&F in repairs bell, multi music type AC, 230 volts single pole complete all as specified and directed. |
| 162 | M&L for earthing complete with galvanized steel earth plate 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point of galvanized Iron/steel of size 75 x 75 x 25 mm,supplying and laying charcoal dust, common salt, PCC 1:2:4 typeB-1 chamber and MS angle iron frame 40 x 40 x 3 mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, GI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified & directed. |
| 163 | Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 50 sqmm3.5 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified. Note :- Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately complete all as specified and directed. |
| 164 | M&L for brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection including taking down old unserviceable bricks complete all as specified & directed. |
| 165 | M&L for dry sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required covercomplete all as specified and directed.Note :- Thickness after punning shall be considered for payment. |
| 166 | Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified. Note :- Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately complete all as specified and directed. |
| 167 | Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 10 sqmm2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified. Note :- Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately complete all as specified and directed. |
| 168 | S&F LED type security-DRACO SERIES light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as specified and directed. Make : C&S Cat Part No LTESS20WLED or equvalent Crompton Greaves /Wipro |
| 169 | S&F in repair street light bracket made to shape at required angle made out of 32 mm dia (light grade)/suitable size for fitting of security light GI tubing of length not less than 1.0 mt long suitable for fixing /holding street light fittings including mild steel flat iron 32 x 3 mm clamp 02 Nos with bolts, nuts and washer complete all as specified and directed. |
| 170 | M&L for galvanized steel water tubing medium grade of 40mm bore with & including all fittings complete all as specified and directed. |
| 171 | Supply & fix LED 36/40 watt, square shape,2 feet x 2 feet, backlit panel, Cool white light (6500K), Recessed Panel for false ceiling, Aluminium housing incl connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Halonix, Havells, philips, wipro or equivalent |
