|
| 1 | Earth work excavation in all kind of soil within 50 m.initial lead and 1.5 m lift including rough dressing and levelling the bed and depositing the soil within initial lead and lift as per direction of the Engineer-in-Charge. |
| 2 | Filling in foundation and plinth & trenches with sand well watered and rammed including cost and conveyance of all material to site all complete as per direction of the Engineer-in-Charge. |
| 3 | Cement Concrete (1:3:6) with 4 CM size HGCB stone including cost of all materials and labour etc. complete in all respect as per direction of the Engineer-in-Charge. |
| 4 | Fly Ash bricks masonry in CM (1:4) using fly ash brick of size 25cm x12cm x 8cm in Foundation & Plinth as per direction of the Engineer-in-Charge |
| 5 | RCC M20 work with 20mm & down graded size black h.g.c,b chips including hoisting & laying including cost of all materials and labour etc.complete in all respect as per direction of the Engineer-in-Charge.Column Base , Column Pedestrial,RccPlinth beam |
| 6 | RCC M20 work with 20mm & down graded size black h.g.c,b chips including hoisting & laying including cost of all materials and labour etc.complete in all respect as per direction of the Engineer-in-Charge.RCC Column(Below GL - 0.3 & Above GL - 3.65mt) ,Rcc Roof Beam |
| 7 | RCC M20 work with 20mm & down graded size black h.g.c,b chips including hoisting & laying including cost of all materials and labour etc.complete in all respect as per direction of the Engineer-in-Charge.Chajja |
| 8 | RCC M20 work with 20mm & down graded size black h.g.c,b chips including hoisting & laying including cost of all materials and labour etc.complete in all respect as per direction of the Engineer-in-Charge.Roof Slab |
| 9 | Straightening, cutting, bending, binding tor steel rods, cranking, hooking, tying the grills & placing in proper position for R.C.C work, including cost of binding wires of 18 to 20 gauge, cost, conveyance, taxes of steel and all other materials, cost of all labour with T&P required for the work etc. complete as per direction of the Engineer-in-Charge.Steel @ 0.9 qtl/ cum of RCC vol.(as per item no 4) |
| 10 | Fly Ash bricks masonry in CM (1:6) using fly ash brick of size 25cm x12cm x 8cm in superstructure including cost conveyance, royalties of all materials etc all complete as per direction of the Engineer-in-Charge. |
| 11 | Providing, fitting & fixing of aluminium door with OEL anodized Aluminimum door with 12mm thick prelaminated NOVAPAN Board as per direction of the Engineer-in-Charge. |
| 12 | Supplying, fitting & fixing up window (slidin type) made of Aluminium section as window frame with 5mm thick black glass as panel as per direction of the Engineer-in-Charge. |
| 13 | Supplying, fitting & fixing of M.S. window grill of approved design |
| 14 | 16mm thick cement plaster (1:6) over brick work including cost, conveyance, royalties of all matertials etc complete as per direction of the Engineer-in-Charge. |
| 15 | 12mm thick cement plaster (1:6) over brick work including cost, conveyance, royalties of all matertials etc complete as per direction of the Engineer-in-Charge. |
| 16 | Supplying, fitting and fixing of Vetrified tiles in floors on 25mm C.M. (1:1) jointed with neat colour pigment to match the shade of the tiles including rubbing and polishing etc. complete as per direction of the Engineer-in-Charge.Room |
| 17 | Supplying, fitting and fixing of Vetrified tiles in floors on 25mm C.M. (1:1) jointed with neat colour pigment to match the shade of the tiles including rubbing and polishing etc. complete as per direction of the Engineer-in-Charge.Dado |
| 18 | Finishing wall surface with acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour, T&P etc. complete. as per direction of the Engineer-in-Charge. |
| 19 | Priming 1 Coat with any approved Primer with cost of all materials, taxes, labour. T&P etc. complete |
| 20 | Wall painting two coats with distemper of approved shade to give an even shade including cost of materials as per direction of the Engineer-in-Charge. |
| 21 | Finishing to the exposed surface of wall with weather coat of any approved shade on new work two coats to give an even shade including cost of weather coat all cost of labours and T&P etc. complete as per direction of the Engineer-in-Charge. |
| 22 | Supplying fitting & fixing of Electrical items & P.H as per direction of Engineer-in-charge |
| 23 | Construction of display board at work site with photo |
| 24 | Add 18% GST Please Enable Macros to View BoQ information |
