|
| 1 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. |
| 2 | a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 3 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. |
| 4 | a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 5 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement withM20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 6 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20( 1 cement: 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 7 | Centring and shuttering including strutting, propping etc and removal of form work for : |
| 8 | a) Column, pillars, posts and struts etc. |
| 9 | b) Lintels, beams, girders, bressumers and cantilevers etc. |
| 10 | c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 11 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 12 | a) TMT |
| 13 | Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand). |
| 14 | Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level. |
| 15 | Half brick masonry with best available local bricks in cement mortar 1:4 (1 cement:4 coarse sand) in foundation and plinth |
| 16 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 17 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : |
| 18 | For fixed portion. |
| 19 | a) Powder coated aluminium (minimum thickness of powder coating 50 micron). |
| 20 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). |
| 21 | a) Powder coated aluminium (minimum thickness of powder coating 50 micron). |
| 22 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item) |
| 23 | 4.1 With float glass panes of 4.0 mm thickness. |
| 24 | Providing and fixing best available local wood glazed shutters for doors, windows and clerestory window using 7.5 kg/Sq.m. (3 mm thick glass panes) including black enamelled MS butt hinges with necessary screws. |
| 25 | b) 30 mm thick |
| 26 | Providing and fixing 38 mm thick wire gauge shutters using galvanized mild steel wire gauge of IS gauge designation 140G with wire of dia 0.56 mm for doors, windows and clerestory windows including anodized aluminum butt hinges with necessary screws. |
| 27 | a) 2nd class approved local wood class - B I. |
| 28 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). |
| 29 | Providing precast cement concrete jali M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size) reinforced with 1.6 mm dia mild steel wire including, roughening, cleaning, fixing and finishing in cement mortar 1 : 3 (1 cement : 3 fine sand) etc complete upto floor two level excluding plastering of the jams, sills and soffits. |
| 30 | a) 50 mm thick |
| 31 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. |
| 32 | a) Ornamental grill. |
| 33 | Providing and fixing MS sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete. |
| 34 | a) 250 x 16 mm |
| 35 | Providing and fixing MS tower bolts (barrel type) with necessary screws etc complete. |
| 36 | a) 250 x 10 mm |
| 37 | b) 150 x 10 mm |
| 38 | Providing and fixing MS door latch with necessary screws etc complete. |
| 39 | a) 250 x 20 x 6 mm |
| 40 | Providing and fixing MS handles with necessary screws etc complete. |
| 41 | a) 100 mm |
| 42 | b) 75 mm |
| 43 | Providing and fixing MS Hooks and Eyes. |
| 44 | a) 150 mm |
| 45 | Providing and fixing 12 mm thick and 100 mm wide pelmet with 25 mm dia wooden curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete. |
| 46 | b) Timber class - B I |
| 47 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 48 | 25 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement.. |
| 49 | Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor. |
| 50 | a) 18 mm thick |
| 51 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete |
| 52 | a) Size of Tile 600x600 mm |
| 53 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 54 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 55 | a) Granite stone slab of colour black, Cherry/Ruby red 18 mm thick (slab area upto 0.50 sqm) |
| 56 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown or/and residual bitumen applied hot @ 1.45 Kg. per Sq.m. of area for each courses, second course of roofing felt type-3 grade-I (hessian base self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea size gravel spread at 6 Cu.dm. per sqm. including preparation of surface excluding grading complete. |
| 57 | Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand). |
| 58 | a) 100 mm diameter pipe |
| 59 | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand). |
| 60 | (A) CI Plain bend |
| 61 | b) 100 mm diameter |
| 62 | 12 mm cement plaster 1 : 6 (1 cement : 6 fine sand). |
| 63 | 15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall. |
| 64 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 65 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 66 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 67 | Painting two coats with oil type wood preservative of approved brand and manufacture on new work. |
| 68 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 69 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 70 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 71 | Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. |
| 72 | a) 100 mm dia SW pipes |
| 73 | b) 150 mm dia SW pipes |
| 74 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design. |
| 75 | a) 100 mm dia SW pipes |
| 76 | b) 150 mm dia SW pipes |
| 77 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design. |
| 78 | a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 79 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). |
| 80 | a) 15 mm nominal bore |
| 81 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work). |
| 82 | a) 15 mm nominal bore |
| 83 | b) 20 mm nominal bore |
| 84 | c) 32 mm nominal bore |
| 85 | Providing and fixing brass bib cock of approved quality. |
| 86 | a)15 mm nominal bore |
| 87 | Providing and fixing brass stop cock of approved quality. |
| 88 | a) 15 mm nominal bore |
| 89 | b) 20 mm nominal bore |
| 90 | Providing and fixing PVC connection pipe with brass union. |
| 91 | A) 30 cm length |
| 92 | a) 15 mm nominal bore |
| 93 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. |
| 94 | b) Orissa Pattern WC Pan |
| 95 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. |
| 96 | a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality. |
| 97 | Providing and fixing white vitreous china pedestal type (European type WC pan) water closet with seat and lid with CP brass hinges and rubber buffers, 12.5 Litres white vitreous china low-level flushing cistern with fittings and brackets 40 mm white porcelain in enamel led flush band, 20 mm over flow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required. |
| 98 | a) WC pan with white plastic seat and lid. |
| 99 | Providing and fixing CP brass waste for wash basins and sinks. |
| 100 | a) 32 mm dia |
| 101 | Providing and fixing CP Brass Chain and rubber plug complete for sink or wash basins. |
| 102 | Providing and fixing MI fisher union for wash basin and sinks. |
| 103 | a) 32 mm dia |
| 104 | Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers. |
| 105 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). |
| 106 | a) 750 x 20 mm size |
| 107 | Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws. |
| 108 | Providing and fixing sand cast iron heel rest sanitary bend. |
| 109 | a) 100 mm dia |
| 110 | b) 75 mm dia |
| 111 | Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors. |
| 112 | a) 100 mm inlet and 100 mm outlet |
| 113 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 114 | ELECTRICAL INSTALLATIONS |
| 115 | POINT WIRING |
| 116 | Copper point wiring in steel conduit : |
| 117 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 118 | Group A |
| 119 | Group B |
| 120 | Group C |
| 121 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. |
| 122 | 75 mm X 75 mm X 60 mm deep |
| 123 | 150 mm X 150 mm X 60 mm deep |
| 124 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required |
| 125 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 126 | 2 X 10 sq. mm + 1 X 10 sq. mm earth wire |
| 127 | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 128 | 2 x 4 sq. mm |
| 129 | 2 x 6 sq. mm |
| 130 | Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 131 | ERECTION OF FITTINGS |
| 132 | Installation, Testing and Commissioning of pre-wired, fluorescent fitting / compact fluorescent/ LED fitting of all types, complete with all accessories and tube/lamp etc., including supplying and fixing ball and socket arrangement, 2 Nos. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connections with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 133 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 134 | Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. |
| 135 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 136 | CABLES, MAINS AND SUB-MAINS |
| 137 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 138 | Single pole and neutral |
| 139 | Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required. |
| 140 | 32 amps TPN |
| 141 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB\"s (but without MCB\"s and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 142 | 4 way (4 + 12), Single door |
| 143 | Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 144 | 200 Amp, 16 KA |
| 145 | SUPPLY OF LIGHTING FIXTURES & FANS ( mkt. Rates) |
| 146 | Supplythe following Lighting fixtures including lampsatsite.Rate shall include all taxes and duties, transportation etc. complete. |
| 147 | 1 x 40 watts Flourescent Light Fixture as per Bajaj Cat No. BJIE 136/140 |
| 148 | Fancy bracket light fitting |
| 149 | 1200mm sweep ceiling fan (ES NEO of Havells or Equivalent) |
| 150 | CLF Bulb |
| 151 | 20W Extruded Aluminium housing LED batten 1200mm Long (Philips Model No: BN100C LED40S-6500 PSU L120 GR or Eqv.) |
| 152 | 10W Extruded Aluminium housing LED batten 600mm Long (Philips Model No: BN021C LED22S PSU CW GR or Eqv.) |
| 153 | 30W 600x600mm LED Panel Light(Philips Model No: RC380B LED30S-6500 G5 L60W60 PSU OD or Eqv.) |
| 154 | 10W LED Recessed Mounted Downlight(Philips Model No: DN092B LED10S-6500 PSU WH or Eqv.) |
| 155 | 16W Slim Surface mounted LED downlight Square type(Philips Model No: SM251C LED16S- 6500 PSU WH or Eqv.) |
| 156 | 10W LED Bulkhead Lights(Philips Model No:WT140W LED7S CW PSU S1 PCor Eqv.) |
| 157 | 300mm sweep exhaust fan (Ventil Air - DSP of Havells or Equivalent) |
| 158 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 159 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 160 | a) 8 way (4 + 24), Double door |
| 161 | Supplying and fixing following rating, double pole, (single phase and neutral), 40A, 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
