|
| 1 | Demolition of cement concrete in ground floors and pavings n exc 15 (cm) thickness (below or above ground level) |
| 2 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 3 | M&L fly ash Brick work with sub class \"B\" bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed. |
| 4 | M&L fly ash Brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:6) complete all as specified and directed. |
| 5 | M & L for 18- 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 6 | Dismantling Stone slabs and tiles of any description or thickness in floors & pointed in any Mortarcomplete all as specified and directed. |
| 7 | M & L for vitrified ceramic tiles double charge light shed of 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but n.exc 1.0 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) complete all as specified and directed. |
| 8 | Taking down cement plaster any description on brick or stone walls etc including Removing of tree/plant girth not exc 15 cm from wall/roofing including removing all roots ,raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 9 | M &L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4), finished even and smooth (without using extra cement) using water proofing compound.as specified and directed. |
| 10 | M&L for rendering 10 mmthick in ceiling on brick work or concrete surfaces in CM (1:4), finished even and fair complete all as specified and directed. |
| 11 | M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished even and smooth (without using extra cement). complete all as specified and directed. |
| 12 | M&L 40 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in levelling coarse of roof/floor complete all as specified and directed. |
| 13 | M &L Glazed ceramic coloured tiles in vertical surface 450X 350 (7-8mm) thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:4) on fair face of brick work or concrete surfaces as backing for tiles.all as specified and directed. |
| 14 | M & L coloured Non Skid ceramic coloured jointless tiles (square/rectangular) area of each tile exc 0.18 Sqm but not exc. 0.38 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM (1:6) complete all as specified and directed. |
| 15 | M & L for applying two coats of oil bound distemper with roller over one coat of primer,after preparation of new surfaces of walls etc, complete all as specified and directed. |
| 16 | M&L for 1 mm thick of Birlawhite putty/JK white wall care putty in two layer on new/old plastered surfaces and making the surface uniform & smooth. Note:Application of new/old finishes to be carried out by authorised applicator |
| 17 | M&L for rendering 10 mmthick in ceiling on brick work or concrete surfaces in CM (1:4), finished even and fair complete all as specified and directed. |
| 18 | M&L for Preparation of old decorated surfaces of ceiling and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 19 | S&F Powder coated aluminium partition, frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screwsetc complete all as specified.Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item.(ii) Item shall be paid as per weight of aluminium section (iii)The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing complete all as specified and directed. |
| 20 | S &F Floor door stopper (150 mm) of brass body and tongue with hard drawn steel spring complete all as specified and directed. |
| 21 | S&F 4mm thickfigured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqm each pane complete all as specified and directed. |
| 22 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or fixing rubber gasket with aluminium frame in each pane complete all as specified and directed. |
| 23 | S & F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples, . |
| 24 | Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 including fittings on walls/ceiling or laying in floors incl chase cutting complete all as specified and directed. |
| 25 | S&F of 25mm dia tank union cpvc complete all as spfd and directed. |
| 26 | S&F of 20mm dia brass elbow complete all as spfd and directed. |
| 27 | S&F of 20mm dia brass Tee complete all as spfd and directed. |
| 28 | S & F Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed. |
| 29 | S & F of Male & Female Brass Threaded Adaptor (MFTA & MTA/ MBTA & MFBTA)complete all as specified and directed. |
| 30 | S&F 25mm CPVC Gate Valve/tank union/Float valve fixed in pipe all as Specified and directed. |
| 31 | M&L Brass barrel tower bolts, with cast or sheet barreland rolled or cast bolts and fixed 200mm long complete all as specified and directed. |
| 32 | M&L Extruded brass handles, fabricated type polished 150mm long complete all as specified and directed. |
| 33 | S&F 125 mm long Stainless steel butt hinges with steel hinge pin etc complete all as specified and directed. |
| 34 | M&L for preparation of new decorated surfaces of wall and applying two coats of antifungal exterior paint (of shade/colour as directed by GE) over one coat of primer all as per manufacturerinstruction including necessary scaffoldings etc. complete all as specified and directed. |
| 35 | M&L for 18 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on bothfaces ; fixed with screws to timber frame work complete all as specified and directed. |
| 36 | M&L for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed. |
| 37 | S & F of 30 mm wide flap when open, stainless steel bright finish or electro galvanised continuous (Piano) hingecomplete all as specified and directed. |
| 38 | S&F magnets to be used in cabinets complete all as specified and directed. |
| 39 | S & F of brass fancy type handle 150 mm long complete all as specified and directed. |
| 40 | Supply & Fixing heavy duty telescopic sliding channel suitable for 18/19 mm thick prelaminated paarticle board/ply board fixed at site as per directed. |
| 41 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 42 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed. |
| 43 | S&F PVC (SWR) bends ISI marked any radius of 110 mm borewithaccess door complete all as specified and directed. |
| 44 | S&F PVC (SWR) bends ISI marked any radius of 75 mm borewithaccess door complete all as specified and directed. |
| 45 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed. |
| 46 | S&F PVC (SWR) vent cowl for 110 mm bore pipe |
| 47 | S&F PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement |
| 48 | S&F PVC (SWR) multi floor trap with grating 100 mm dia including jointing with solvent cement |
| 49 | S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltrhoisted and fixed in position including Dismantling water tanks and removing to store all as specified and directed. |
| 50 | S & F of 6mm thick bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 51 | S & F15mm Bib cock with flangejaguar (cat part no.KUP-35037) or equivalent to Kohler and Hindware chromium plated and fancy type long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. jaguar or equivalent or equivalent to Kohler or hindware. |
| 52 | S&F 15 mm dia stop valves/angle valves/ cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. Make: jaguar (cat part no.KUP-35053) or equivalent to Kohler or hindware. |
| 53 | S&F Shelf glass 600mm long assembly with CP screws etc complete all as spd .Make: jaguar(cat part no.CPA-1171)equivalent to Kohler or hindware. |
| 54 | S&F Corner self assembly with CP screws etc complete all as spd .Make: jaguar(cat part no-CPA 1173) or equivalent to Kohler or hindware. |
| 55 | S&F jaguar cat part no. FLR-5281N or equivalentto Kohler or Hindware wall mixer 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe,connection leg & wall flange suiitable for 15mm bore pipe complete all as specified and directed |
| 56 | S&FTowel Rail 600 mm long Stainless steelcomplete all as spfd and directed by Engr-in-ChargeMake: jaguar(cat part no.1111) or equivalent to Kohler or hindware. |
| 57 | S&FTowel Ring round Stainless steel complet all as spfd and directed Make: jaguar(cat part no.CPA-1121) or equivalent to Kohler or hindware. |
| 58 | S&F Two way bib cock with wall flange complet all as spfdand directed Make: jaguar(cat part no.OPP-15041PM) or equivalent to Kohler or hindware. |
| 59 | S &F as in repair jaguar chromium platedmaze over head shower 300x300mm square shape single flow(body & face plate stainless) with rubit cleaning system including shower arm complete all as specified and directed at part no OHS-1639 or equivalent to Kohler or hindware |
| 60 | S&F Table top wash basin whitesize 600X440X165mm including Bottle Traps, chain & plug and porcelain stopperbrackets or fixed complete all as specified and directed. Make: jaguar (cat part no.OPS-WHT-15931PM) or equivalent to Kohler or hindware. |
| 61 | Supply & fix Single lever tall boy with 150mm ewtension body fixed spout without spout popup waste system with 600mm long braided hoses brass chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed. Make: Jaquar(cat part no. FUS-29005NB) or equivalent to Kohler or hindware. |
| 62 | S&FCP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etccomplete as in repair all as specified and directed Make: jaguar or equivalent to Kohler or hindware. |
| 63 | S&F PVC connections 15mm size with PTMT nuts of length 450/600 mm all as specified and as directed.Make: Jaquar or equivalent to Kohler or hindware. |
| 64 | S&F in repair chromium plated soap dish containerof Make - Jaquar cat part no.AKP-35731P or equivalent to Kohler or hindware. |
| 65 | S&F in repair chromiun plated soap dispenser with glass bottle cat part no.ACN-1135N or equivalent to Kohler or hindware. |
| 66 | S&F Jaquar(cat part no. LYS-WHT-38851S300UFSMN or equivalent) water closet pan with single piece with soft close slim saet cover,hinges,dual flush cistern fitting, size 370x670x720mm,S trap complete all as specified and directed. |
| 67 | M&L for providing water proofing treatment over cleaned roof surfaces with super thermo APP modified water froofing membran comprssing of following for non-approachable roof:(i) Removal of existing roof treatment/Mud Puska of any thickness and cleaning sweeping and washing and down with water to remove all dust etc from plastred roof surfaces/wall and filling of crack with sealing compound etc. (ii)Bitumen based primer conforming to IS 3384-1965 at 0.30 kg per sqm.(iii) One layer of super thermo APP modified water proofing membran with non polyster reinforcement of Make (M/S STP texsa Ltd/hyperplus membrane of M/S IWL India Ltd. M/S STP and Tikki Tar Ltd ) 3mm thick and minimum weight @ 3.50 Kg/sqm laid with gas torch and fasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooving and making good with PCC gola 1:2:4 type B1 etc adhere to bitumen all as per manufacturer instructions.(iv)Applying two coat of aluminium paint @ 0.20 kg/sqm per coat over bitumen layers as per manufacturer instruction (application including side lap overlaps shall be provided not less than 10cm and jointed sealed with torch as per manufacturer instruction specification. |
| 68 | M & L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded aggregate as in plinth protection and finishing surfaces even and smooth without using extra cement. complete all as specified and directed. |
| 69 | Taking down chowkhats for frames exc 1.5 Sqm but not exc 4.00 Sqm complete all as specified and directed. |
| 70 | Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed. |
| 71 | Demolition and breaking up drain pipe (salt glazed stone ware, AC or reinforced concrete) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed. |
| 72 | M&L for DWC HDPE pipes Class SN-8 laid in trenches of 200 mm internal diameter of pipe and jointed as specified complete all as specified and directed.Finolex or equivalent to Kohler or hindware. |
| 73 | M&L forsecond class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints all as spfd and directed. |
| 74 | M&L for 30 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sidesincluding 5 mm thick edging/beading on exposed to view on sides & top complete all as specified and directed. |
| 75 | M & L for 0.9mm thick decorative laminate(mica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions |
| 76 | S&F mortise door lock handle set 200mm 1CK gloria 7 pin brass tumbler mechanism 60 mm all as spfd and directed.Make-Godrej or equivalent to Harrison or Link. |
| 77 | S&F in repair Aluminium body ISI marked Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specifiedand directed Make: Universal/Marshal/Hardwyn. |
| 78 | M&L ForChequered cement concrete tiles 20cm x 20cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with gray pigments cement and pigments complete all as specified and directed. |
| 79 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proofS.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed . (Glass or wiremeshshall be paid separately) Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but noextra payment on this account shall be made. |
| 80 | M & LRCC type B-1 (1:2:4) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns, and in shelves including form work and the like complete all as specified and directed. |
| 81 | M & L for TMTbars 8 mm dia & over cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 82 | S&Fstainless steel draphery rod 25-28mm dia fancy type with brackets,decorative end caps coloured to match complete all as specified & directed. |
| 83 | M&L for voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45degree and replugging them with cement mortar (1:2) 1 cement : 2 coarse sand) to match the existing floors complete all as spfd and directed. |
| 84 | M&L for ATT Along the external wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as spfd and directed. |
| 85 | M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre tocentre and sealing the same all as specified and directed. |
| 86 | M&L for complete removal of existing treatment of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including washing down with water etc. applying two coats of oil bound distemper with roller over one coat of primer, complete all as specified and directed. |
| 87 | M&L for complete removal of existing treatment of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including washing down water etc. applying two coats of antifungal exterior paint(of shade/colour as directed by GE) over one coat of primer all as per manufacturerinstruction including necessary scaffoldings etc. complete all as specified and directed. Note:Application of new/old finishes to be carried out by authorised applicator. |
| 88 | S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed. |
| 89 | M&L two coats of syntetic enamel paint overnew steel/old surface of any description over 10cm in width or grithnot otherwise describedover one coat red oxide primerincluding preparation of surfaces complete all as specified and directed. |
| 90 | S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used & edges will be painted to match with printed sheet suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 91 | S &F Factory Made Solid PVC Moulded Door Shutter with partcle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face all as spfd and directed. |
| 92 | Taking down copper /aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc complete all as specified and directed at site. |
| 93 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch/Busbar including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 94 | Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 95 | Taking down ceiling fan/ exhaust fan/Jhumar Light/Electric Meter of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan bladesand deposit to MES store yard of AGE E/M complete all as specified and as directed. |
| 96 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts gradeISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches,including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly includingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 97 | (a) One light point controlled by one, one way switch 5 Amps |
| 98 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 99 | (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 100 | (d)One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 101 | Description all as per item No 96 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 102 | Description all as per item No. 96 here in before butusing 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of4.0 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point) |
| 103 | S & F modular switch piano flushtype, single pole, one way, and 5/6 Amp single module complete all as specified and directed. |
| 104 | S & F modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and directed. |
| 105 | S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed and directed. |
| 106 | S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed. |
| 107 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISImarked for batten fitting complete all as specified and directed. |
| 108 | S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 109 | S & Fmodular white cover plate with frame 3 module |
| 110 | S & Fmodular white cover plate with frame 6/8 module |
| 111 | S & Fmodular metal flush box for 3 module |
| 112 | S & Fmodular metal flush box for 6/8 module |
| 113 | M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 114 | S & F for sheet metal enclosure MCBDBTPN4 way Vertical type with 200 Amps suitable for MCCB 125 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 115 | Supply and fix 4 Pole MCCB 100 to 125 Amp, 50 Hz, 415 V with rupturing capacity 35 KA complete all as specified and directed. |
| 116 | S & F for sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. |
| 117 | S & FforMCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 118 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and directed. |
| 119 | S & Ffor MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and directed. |
| 120 | S & Ffor metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Ampsincluding removal of old unserviceable one complete all as specified and as directed complete all as specified and directed. |
| 121 | Re-fixing of ceiling fans complete with blades, down rods, electronic regulator and accessories complete all as specified anddirected. |
| 122 | Re-fixing of xhaust fan of 250 mm sweep made of plastic/steel body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all specifiedand directed. |
| 123 | Re-fixing of electronic meter and accessories complete all as specified anddirected. |
| 124 | Re-fixing of jhumar light and accessories complete all as specified and directed. |
| 125 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed. . |
| 126 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 127 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete alldirected |
| 128 | Supply, installation, fabrication, testing and commissioning LT Panel board, Factory made cubical type, outdoor type, floor mounted, factory made out of 25mm x 25mmx 5mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electricsupply system and wiring with suitable size of 250 amps rated aluminium bus bar for phase & neutral complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar height 1.5 feet from ground with PCC 1:2:4 type B2 including provision of for incoming and outgoing cable gland and proper finshing as per existing surface complete all as specified and directed. (a) Incoming :(i) MCCB 04 Pole 16 kA, 125 Amp,415 Volts(Qty -01 No)(b) Outgoings : (i) MCCB 04 Pole 16 KA, 100 Amp, 415 Volts, (Qty-02 Nos) (ii) MCCB 04 Pole 10 KA, 63 Amp,415 Volts, (Qty-02 Nos) (iii) Aluminium bus bar suitable size 3 phase, 4 wire 250 Amp, 415 V (iv) Digital Volt meter 0-500 V with selector switch. (v) Digital Amp meter 0-200 amp with CT and selector switch. (vi) LED iIndicating lamp (Blue, Yellow & Red) -1 set |
| 129 | M & L for earthing complete with galvanized earth plate electrode 600mmx 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 5 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-1 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe and connected to earthing point complete all as specified and as directed. |
| 130 | Dilto item No 129, but using galvanised iron strip 25×4mm as earthing lead |
| 131 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPEinsulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of sizecomplete all as specified and directed and including taking down existing cable any type. |
| 132 | (a) 3.5 core x 95 Sqmm |
| 133 | (b) 3.5 core x 50 Sqmm |
| 134 | Galvanised iron steel tubes, ISI marked light grade of size 40mm bore for cable protection along the poles under road under drains complete all as specified and directed. |
| 135 | Excavation in trenches n.exc 1.5 mtr wide and 1.5 mtr in depth in hard/dense soil for taking up/ laying of cable and getting out complete all as specified and directed. |
| 136 | Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed. |
| 137 | Removing surplus soil to a distance n.exc 50 mtr and making good the disturbed surfaces complete all as specified and directed. |
| 138 | Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed. |
| 139 | Supply and laying for brick of common burnt clay, sub class \"B\" old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cables abutting each other complete all as specified and directed. |
| 140 | Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. |
