|
| 1 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 2 | M & L for providing PCC type B0, (1 : 2 : 4) (using 12.50 mm graded aggregate) as incoping, and the like including weathering, slightly rounded or chamfered angles and throating complete with using WPC complete all as specified and directed |
| 3 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed |
| 4 | M&L Brick work using sub class old bricks straightor curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 5 | Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 6 | M & L for rendering 10mm thick internal surfaces on brick work in cm (1:6)in and finishing surfaces even and fair without using extra cement complete all as specified and directed |
| 7 | M & L for rendering 15mm thick in two layerson external surfaces on brick/concrete in CM (1:4) finished even and smooth without using extra cement with WPC complete all as specified and directed . Note :- WPC measured and paid separatly complete all as specified and directed. |
| 8 | Supply only liquid water proofing compound only make of ISI Marked |
| 9 | M&L preparing Old plastered surfaces of wall and applying complete wall with1.0 mm Wallputty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed |
| 10 | M&L preparing newly plastered surfaces of wall and applying complete wall with1.0 mm Wallputty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed . |
| 11 | Preparing New plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of white wash complete all as specified and directed . |
| 12 | Dismantling floor, hearth or wall tilling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed . |
| 13 | M & L for PCC (1:2:4) type B-1, 25 mm thick, using 20mm graded stone aggregate complete all as specified and directed. |
| 14 | M & L for PCC (1:2:4) type B-1, 40 mm thick, using 20mm graded stone aggregate Finishing cementconcrete surface even and smooth without using extra cement complete all as specified and directed. |
| 15 | M & L for light shed virified ceramictiles 7.5 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick screed bed or bedding layer with CM (1:4) complete all as specified and directed .Notes : Shade of the tile including colour, design and pattern shall be approved by AGE. |
| 16 | M & L for light shed virified ceramictiles 7.5 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skitting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 10mm thickrendering bed or bedding layer with CM (1:4) complete all as specified and directed .Notes : Shade of the tile including colour,design and pattern shall be approved by GE. |
| 17 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in C:M (1:4) etc. complete all as specified and directed . Notes : Shade of the tile including colour, design and pattern shall be approved by GE. |
| 18 | M & L for coloured Glazed ceramic tiles in vertical surface 450x300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed in CM (1:4) complete all as specified and directed.Notes : Shade of the tile including colour, design and pattern shall be approved by GE. |
| 19 | Dismantling of wall and ceiling boards, any thickness including cover fillets complete all as specified and directed . |
| 20 | S & F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 21 | S&F 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system complete all as specified and directed . |
| 22 | Supplying and laying as in repair of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed . |
| 23 | S & F of CPVC pipes MBTA/FBTA fittings such as tee, elbow, socket and Tank union etc of 25 mm outer dia complete all as specified and directed . |
| 24 | S&F in repair vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets , waste coupling complete all as specified and directed . |
| 25 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover etc complete all as specified and directed. |
| 26 | S&F in repair 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed |
| 27 | S&F in repair 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" woth long shanks and flynuts, screwed for iron pipe complete all as specified and directed . |
| 28 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 29 | S&F in repair 15mm dia stop valve / Angle valve chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union complete all as specified and directed . |
| 30 | S&F in repair brass CP wall mixer, 15mm bore ,for mixing hot & cold water screw down for iron pipe complete all as specified and directed . |
| 31 | S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors complete all as specified and directed . |
| 32 | S & F110 mm diabore PVC (SWR) bends any radius complete all as specified and directed . |
| 33 | S&F110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 34 | S&F110mm PVC(SWR) bend any radius complete all as specified and directed . |
| 35 | S&F 110mm PVC(SWR) junction single(single T) equal or unequal complete all as specified and directed . |
| 36 | M&L 75mmPVC(SWR) floor trap with grating including jointing with solvent cementcomplete all as specified and directed |
| 37 | S&F 110mm PVC(SWR) vent cowl complete all as specified and directed . . |
| 38 | S & F in repair coloured toilet paper holder,vitreous china box type fixed to wall with chromium plated brass screws complete all as specified and directed . |
| 39 | S&F in repair soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall.complete all as specified and directed . |
| 40 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed . |
| 41 | S&F in repair aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flangescomplete all as specified and directed . |
| 42 | S & F for 600mm x 450mm bevelled edge mirror or selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chroimium plated brass screws and cup washers complete all as specified and directed. |
| 43 | Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame). |
| 44 | Taking down chowkhats or frames exc 1.5 Sqm ( without taking shutters from the frame). |
| 45 | Taking down existing aluminium doors/windows and re-fixing after tightening loose screw including replacement of unserviceable screw, aluminium beading, rubber packing (including taking down carefully glass panels & re-fixing the same and other hardware fitting such as hinges, tower bolt , handle etccomplete all as specified and directed . (Note:- floor door spring,mortice lock , tinted glass will be measured and paid saperatly). |
| 46 | Taking down existing aluminium partition wall and re-fixing after tightening loose screw including replacement of unserviceable screw, aluminium beading, rubber packing, ACP Sheet & re-fixing the same complete all as specified and directed . |
| 47 | S & F Powder coated aluminium frame/shutters for Door,windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement,rubber beading, screws,etc complete all as specified and directed Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item.(ii) Item shall be paid as per weight of aluminium section (iii)The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight.(iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 48 | S & F for 6mm Powder coated decorative aluminium grill complete all as specified and directed |
| 49 | S&F 5mm thick tinted glass in aluminium doors & windows with rubber packingincluding hacking out old broken glass complete all as specified and directed( any thickness, size from aluminium beading ) |
| 50 | S&F in repairs aluminium (Die cast ) body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 85 to 1000mm in width and of weight between 61 yo 80 kg snfcomplete all as specified and directed . |
| 51 | S&F in repair mortice lock vertical type& 4- levers of 100mm brass body with two keys complete all as specified and directed . |
| 52 | S & F 5 MM thick ACP Sheet fixed to alm frame work as specified and as directed |
| 53 | S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed |
| 54 | S & F of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed |
| 55 | S & F Solid PVC Door frame size 50mmx 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube and fixing in opening as per spc & drawing complete all as specified and directed |
| 56 | S&F Solid PVC factory madeDoor shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC \"C\" channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling ofplain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as pere specification and drawing complete all as specified and directed . |
| 57 | S & F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21of size 75 mm long complete all as specified and directed. |
| 58 | S & F Aluminium handles, cast type anodised 150 mm long complete all as specified and directed . |
| 59 | S & F 200 mm long aluminium anodised barrel tower boltof extruded section complete all as specified and directed . |
| 60 | S&F in repair20mm dia curtain rods fancy type, mild steel chromium plated with fixing brackets, stops, rollers complete all as specified and as directed . |
| 61 | M&L for Cement concrete (1:3:6)type C-1 (using 20 mm gradedstone aggregate)75 mm thick as in plinth protections, surface finished even and smooth w/o using extra cement including 3 mm thick glass dividing strip of figured glass , pin headed type, 38 mm wide inserted in position complete all as specified and directed. |
| 62 | S&F in repairs brass chromium plated health faucet 15 mm with flexible tube (1.5 m long) of stainless steel provided rubber hose and wall hook etccomplete all as specified and directed. |
| 63 | S&F in repair 15 mm dia two way bib taps, brass fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed . |
| 64 | S&F 4mm thick high pressure steam cured Non asbestos fiber cement building board,complete all as specified and directed by engr in charge. |
| 65 | M & L for point wiring using approved colour coding as per IS with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 66 | (a) One light point controlled by one way switch 5 Amps |
| 67 | S & F switch piano flushtype, single pole, one way and 5/6 Amp single complete. |
| 68 | S & F ceiling rose, surface bakelite with 3 terminals, ISImarked for batten fitting complete all as specified. |
| 69 | S&F in replacement of LED panel light fitting 36 watt LED (2x2 ft), LED panel fitting, including LED in white230 volt energy saving environmental friendly, long life, corrosion resistant, impact proof, surface mounting IP-65 luminaire with PC housing in opal finish suitable for wet location with brighness LEDs with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed. |
| 70 | Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 meter in depth and getting out in Hard /dense soil complete all as specified and directed. |
| 71 | All are as per item no 70 above but exceeding 1.5 meter in depth not exceeding 3.0 meter in depth and getting out in Hard /dense soil complete all as specified and directed. |
| 72 | M & L for Cement concrete type D2 (1:4:8) using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed |
| 73 | M & L for 40 mm thick Cement Concrete M-15 Nominal Mix (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - water proofing compound will be measured and paid separately. |
| 74 | Supply only Integral water proofing compound (WPC) complete all as specified and directed. |
| 75 | Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed |
| 76 | Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed |
| 77 | M & L for Brick work with sub class ‘B’ bricks,straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed |
| 78 | M & L Brick work using sub class old size bricks straightor curved on plan to any radius of half brick thick built in cement mortar (1:4) complete all as specified and directed. |
| 79 | M & L for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified and directed. |
| 80 | M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement secified and directed |
| 81 | M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 82 | M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed |
| 83 | M&L for 75mm thick P.C.C (1:4:8) type D-2 in sub base of floorcomplete all as specified and directed |
| 84 | M & L for 25 mm thick PCC (1:2:4) type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement complete all as specified and directed |
| 85 | M&L 15mm thick screed bed or bedding layer in cement plaster (1:4) for laying floor finished to receive floor tiles complete all as specified and directed |
| 86 | S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but notexceeding 0.38 sqm, in floors etc, setand jointed in neat cement slurry and pointed in white or Coloured cement to match shade of the tiles complete all as specified & directed.Notes : Shade of the tile including colour, design and pattern shall be approved by AGE. |
| 87 | S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but notexceeding 0.38 sqm, in Skirting etc, setand jointed in neat cement slurry and pointed in white or Coloured cement to match shade of the tiles complete all as specified & directed.Notes : Shade of the tile including colour, design and pattern shall be approved by GE. |
| 88 | S & F Powder coated three track aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws,etc complete all as specified and directed (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item.(ii) Item shall be paid as per weight of aluminium section (iii)The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight.(iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 89 | M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 90 | M & L forPressed steel frames for doors with one or more rebates size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified. |
| 91 | M&L Plain Cement Concrete(1:3:6) type C1 filling of pressed steel frame and hold fast block etc.complete all as specified and directed |
| 92 | S&F 2nd class hardwoodfactory made 30 mm thick flushshutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified and directed |
| 93 | M&Lfor 30mm thicksecond class hardwood glazed and skelton doorshutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete all as specified and directed. |
| 94 | S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staplescomplete all as specified and directed |
| 95 | M&L two coats of synthetic enamel paint over new woodensurfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primerincluding preparation of surfaces complete all as specified and directed |
| 96 | M&L barrel tower bolts stove enamelled black of size 150 mm complete all as specified |
| 97 | S&F 125mm long aluminium anodised handles or extruded section complete all as specified and as directed . |
| 98 | S&F 300mm long Aluninium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed |
| 99 | S&F floordoor stopper 140 mm of aluminium alloy body and tongue anodised with hard drawn steel springcomplete all as directed |
| 100 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete as specified and directed. |
| 101 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete as specified and directed. |
| 102 | S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etcFe 410 W (Gde E - 250 quality) as specified complete as specified and directed. |
| 103 | M & L for precast cementconcrete M-15 Nominal Mix (1:2:4) (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 104 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 105 | M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 106 | S&F 12mm thickSeamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre,including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed |
| 107 | Material and labour for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified. |
| 108 | M & L for preparation of new plasteredsurfaces and applying two coat of acrylic distemper on Ceiling complete all as specified and as directed. |
| 109 | S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed |
| 110 | M & L for preparation of Old plastered surfaces by removing of old paint and applying two coat of Epoxy paint on walls complete all as specified and as directed. |
| 111 | M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including concealed PVC conduit of size 20/25mm ISI marked inclusive oftees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket suitablefor fixing modular plate complete including PVC insulated multi stranded copper conductor 1.5Sq mm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminalincluding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directedfollowing :- |
| 112 | (b) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 113 | (c)One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 114 | Description all as per item No. 111 here in before but 3/5 pin socket outlet point 15 amps independant, with cables of size 2.5 sqmm, PVC insulated unsheathed FRLS copper conductor cable and 1.5 sqmm PVC insulated unsheathed FRLS copper conductor cable as earth continuity conductor connected to common earth dolly all in separate PVC concuit medium grade not lesss than 20mm dia ISI marked incl provn of GI sunken box thickness not less than 1.12 mm & 3 mm thick laminated hylem sheet top cover of required size all as specified and directed. |
| 115 | S & F modular switch piano flushtype, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 116 | S & F modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 117 | S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 118 | S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 119 | S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 120 | S & Fmodular white cover plate with frame 3 module |
| 121 | S & Fmodular white cover plate with frame 6/8 module |
| 122 | S & Fmodular metal flush box for 3 module |
| 123 | S & Fmodular metal flush box for 6/8 module |
| 124 | S&F sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 125 | S&F MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and directed. |
| 126 | S&F MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and directed. |
| 127 | S & F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete necessary mounting arrangements and provision of 0.75 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed. |
| 128 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 129 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 130 | Supply and laying in replacement of service wire 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured withtape and overall PVC sheathed 16 Sqmm 2 core nominal cross section complete all as specified and directed. |
| 131 | Supply and fixing and replacement GI pipe, light grade 40 mm bore, ISI Marked for protection to cable along the pole/across road crossing/passing through culvertcomplete all as specified. |
| 132 | Excavation in trenches n.exc 1.5 mtr wide and 1.5 mtr in depth in hard/dense soil for taking up/ laying of cable and getting out complete all as specified and directed. |
| 133 | Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed. |
| 134 | Removing surplus soil to a distance n.exc 50 mtr and making good the disturbed surfaces complete all as specified and directed. |
| 135 | Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. |
| 136 | Supply and laying for brick of common burnt clay, sub class \"B\" old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cables abutting each other complete all as specified and directed. |
| 137 | M & L for rendering 10mm thick internal surfaces on brick work in cm (1:6) in and finishing surfaces even and fair without using extra cement complete. |
| 138 | M & L for rendering 15mm thick in two layerson external surfaces on brick/concrete in CM (1:4) finished even and smooth without using extra cement with WPC. Note :- WPC measured and paid separatly |
| 139 | M & Ltwo coats of cement base paint white or tinted on walls or fascia of roof or chajjas on old decorated prepared plastered/painted surfaces of bldg complete all specified & directed. |
| 140 | Supply & fixing steel windows/ventilator with side hung shutters including projection type hinges with steel handle, tower bolt and steel peg stay, complete with glazing bars dovetailed or welded all as specified. |
| 141 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size n. exc 0.50 Sqm each complete all as specified and directed. |
| 142 | M&L two coats of synthetic enamel paint over new woodensurfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primerincluding preparation of surfaces complete all as specified and directed. |
| 143 | S&F 125mm long aluminium anodised handles or extruded section complete all as specified and as directed. |
| 144 | M&L for 25-30mm thick mastic flooring (bitumen based hot mastic flooring) anti skiding,math finish complete all as specified and directed. |
| 145 | M&L for 75 mm thick Cement concrete type D 2, (1:4:8) (using 40 mm gradedstone aggregate) in sub base of flooring/ hard standing. |
| 146 | M & L Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 complete.(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) |
| 147 | M & L Machine Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and incl 10mm thick rendering in cement mortar (1:4) , on fair faces of brick work or concrete surfaces as backing complete.(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) |
| 148 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc, dressed stone work and precast concrete articlecomplete all as specified and directed. |
| 149 | M&L Brick work using sub class old bricks straightor curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 150 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 151 | M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 152 | M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of Old steel surfaces complete all as specified and directe. |
| 153 | M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces complete all as specified and directe. |
| 154 | Dismantling of asbestos cement (corrugated or semi corrugated) sheets as in roof coverings complete all as specified and directed. |
| 155 | S & F of SS Roof Air turbo ventilator fan of throat dia 24\" (610mm),Belly dia 28\"(710mm) and height 15\"(381mm) with FRP(Fiber Reinforced polymer) base frames in the stand size of 5.5\" x 3.5\" x 2.0mm thick and provided with a venture demo of an appropriate diameter size complete all as specified and directed |
| 156 | S & F in replacement LED lights fitting 1x 20W 220V, LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements,complete all as specified and as directed. |
