|
| 1 | Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed. |
| 2 | Excacation of post holes (or simllar holes) each n. exc 0.5cum, and getting out insoft/loose soil retuting and filling in and ramming earth of brokrn rubble mixes with earch around in layers not exceeding 25 cm in soft/disintegrated rock completed all as specified and as directed. |
| 3 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone agreegate as in post holes for embedding the post all as specified and directed.Note : PCC shall be filled in alternate post and corner post only upto depth of post holes and measured accordingly for payment. |
| 4 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 6 | Demolition of reinforced cement concrete in any positionnot exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 7 | M&L for demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 8 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 9 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed. |
| 10 | Demolition of Brickwork or stone/ boulder masonry, built in CMincluding all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 11 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc and including 15mm thick screed bed in CM 1:6 complete as specified and directed. |
| 12 | M&L forkota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 13 | M&L in repair to Granite (of any type/colour) work (table rubbed and polished) 10 to 20mm thick in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) including pointing in white cement (1)2( using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamgering of edges complete all as specified and directed. |
| 14 | M&L for rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed. |
| 15 | M&L for 75mm thick cement concrete 1:3:6 type C1, using 40mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3)complete all as specified and as directed. |
| 16 | Dismantling floor ,hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed . |
| 17 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 18 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 19 | Providing cement concrete 25 mm thick typeB-1 (1:2:4) using 20 mm graded agg as in sub base to flooring complete as specified and directed. |
| 20 | M&L, non skid white ceramictiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed |
| 21 | M & L,non skid ceramictiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to matchcomplete all as specified and directed |
| 22 | M & L,glazedcoloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.05 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4set & jointed in neat cement slurry & pointed in coloured cement to matchcomplete all as specified and directed. |
| 23 | M&L for 15 mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces and finished the surface fair and even complete all as specified and directed. |
| 24 | M&L for 5 mm thick rendering in CM 1:3 on ceiling, soffits, chajja projection etc complete all as specified and directed. |
| 25 | M&L for 15mm thick cement plaster in cement mortar 1:4 in two coats, (10mm thick rendering coat in cement mortar 1:4, 5mm thick second coat mixed with water proofing compound as per manufacturer instruction) on fair faces of brickwork/concrete work finished even & smooth without using extra cement.Note : WPC will be measured and paid seperately under respective item. |
| 26 | M&L for preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1mm) complete all as specified and directed. |
| 27 | Preparation of old plasteredsurfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1 mm) complete all as specified and directed. |
| 28 | M&L for preparationof new plastered surfaces of wall and applyingtwo coats of cement base paint complete all as specified and directed. |
| 29 | M&L for preparationof oldplastered surfaces of wall and applyinga coat of cement base paint complete all as specified and directed. |
| 30 | Preparation of New plastered surfaces of ceilingand applying Three coat of white wash on ceiling including cornices etc complete all as specified and directed. |
| 31 | Preparation of plastered or unplastered old decorated surfaces of ceiling by broomingdown or steel wire brushing, scrapping down smoke soots, treating oily/greasy spots, moss and efflorescence and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed. |
| 32 | S&F, in repair, Hard drawn steel wire fabric weight n exc 4 Kg per square meter cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt complete all as specified and directed. |
| 33 | S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt complete with glazing bars, dovetailed or welded including taking down old windows complete all as specified and directed. |
| 34 | S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt, complete with out glazing bars, dovetailed or welded complete all as specified and directed. |
| 35 | S&F factory made steel ventilators with top hung shutter including hinges, steel peg stay, glazing bars including applying one shop coat of red oxide primer all as specified and directed |
| 36 | S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary S&F suitable MS hinges ,lugs,lock strike plate, hold fastcomplete all as specified and directed. |
| 37 | M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping, benching, bressumers, steps, incl necessary form work and demolition of existing cement work complete all as specified and directed. |
| 38 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast ,filling etc complete all as specified and directed. |
| 39 | M&L, precast cement concrete Block Masonary with solid blocks 1:3:6 type C1 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed . |
| 40 | M&L for RCC (Nominal Mix) type B0 1:2:4 (12.5mm graded aggregate ) as in Slabs supported on walls, beams and columns in floors, roofs, chajja, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 41 | M&L for RCC (Nominal Mix)type B0 1:2:4 (12.5mm graded aggregate ) as in Chajjas complete all as specified and as directed. |
| 42 | M&L for form workto chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 43 | M&L for use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed. |
| 44 | S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed. |
| 45 | S&F 35 mm thick Flush shutter ,solid core construction ,with blockboard core and plywood face panelcomercial type on boath sides complete all as specified and as directed . |
| 46 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 47 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing toframes, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 48 | S&F Aluminium anodised barrel tower bolt of extruded section length of bolt in200 mm size complete all as specified and directed. |
| 49 | S&F MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed . |
| 50 | S&F,aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 51 | S&F 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed . |
| 52 | S&F, in repair, 20mm dia Harrison rails, mild steel chromium plated with fixing brackets, stops, rolleres etc. complete all as specified and as directed. |
| 53 | S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed. |
| 54 | M&L, preparing of new wooden surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 55 | S&F, anodised Aluminium window and ventilator three trackshutters/partition, powder coated any colour as approved for fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc. complete all as specified and directed. |
| 56 | S&F anodized aluminium door & frame powder coating (minimum thickness of powder coating 50 micron)2 mm thick incl 5.50mm thick tinted glass, fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No floor spring for each shutter complete all as specified and directed with following specifications :-(a) Aluminium door frame =101.50x44.45mm(b) Aluminium style/top & middle rails of shutter=83.5x44.45mm(c ) Aluminium bottom rail of shutter=114.50x44.45mm(d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed. |
| 57 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 58 | S&F, 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed. |
| 59 | M&L, preparing of new steel surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 60 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surface of any description n.exc. 10cm width or girth when unconnected with other painting or when painted in a different tint including preparation of new steel surfaces, complete all as specified and directed. |
| 61 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 62 | S&F, plain aluminium sheeting 0.56mm thick, alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed. |
| 63 | M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfacesetc complete all as specified and as directed. |
| 64 | M&L cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified. |
| 65 | M&L for water proofing treatment to existing non-accessible roofslabs by providing 10mm thick bedding layer of cement morter 1:3 mixed with water proofing compound as per manufacturer\"s instruction and applying one coat of bituminous/polymerized primer confirming to IS-3384 @ 0.30 Ltr/Sqm and applying of one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm and laying of actetic polypropylene (APP) modified membrane pre-fabricated, reinforced with non-woven polyester of 3.50Kg/Sqm (minimum), 3mm thick (minimum), with minimum 75mm side overlaps and 100mmend overlaps and applying one coat of bituminous aluminium paint over APP membrane complete including taking down existing water proofing treatment with bedding layer of cement mortar complete and removal of debris out side of MD land all as specified and directed. |
| 66 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 67 | M & L for rubbing and polishing to existing old kota stone slab/marble/terrazzo flooring and skirting to achieve required finish complete all as specified and directed. |
| 68 | S&F mild steelin posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including one shop coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 69 | S&F Mild steel screw bolts (machine made), 5 to 10mm neck dia with hexagonal or square heads at one end and screwed the other,or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long completed as specified and directed. |
| 70 | M&L for mild steel TMT bars 10mm dia & over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia completeall as specified and directed. |
| 71 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire. |
| 72 | S&F, galvanished, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm barvs dia barbs at 75mm spacinges and straining and fixing to any type of standard rails strining bolts including secuting or tying at crossinges with and provision of galvanished mild steel wire stapples or steel pins, etc. complete all as directd and as specified. (each line wire to be measured) |
| 73 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 74 | S&F in repairs bib taps cast copper alloychromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete as specified and directed. |
| 75 | S&F, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms)complete, all as specified and directed. |
| 76 | S&F in repair vitreous china squatting pan, orrisa pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including making good to disturbed floor with PCC complete all as specified and directed. |
| 77 | S&F in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed |
| 78 | S&F, in repair vitreous china counter top wash basin oval shape, size 550 x 400mm including PVC waste couplingfixed complete all as specified and directed. |
| 79 | S&F, in repair, 1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed |
| 80 | S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where requiredcomplete complete all as specified and directed. |
| 81 | S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed. |
| 82 | S&F in repair angle valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified & directed by Engr-in-Charge. |
| 83 | S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed complete as specified and directed. |
| 84 | S&F, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed. |
| 85 | Supply & Fix in repair vitreous china urinal, Half stall type, white (excluding flushing cistern) incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and as directed. |
| 86 | S&F, 15 mm diapillar tap (long nose) cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered \"Hot or Cold\" with long swan neck swivel typescrewed for iron pipe and fixed complete all as specified and directed. |
| 87 | S & FSoap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed. |
| 88 | S&FAluminium Hat pegs of 6 pegs, Brass solid body 125mm to 175 mm complete as specified and directed. |
| 89 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 90 | S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including \"Z\" clamp complete all as specified and directed. |
| 91 | S&F in repairs,125/110mm bore PVC (SWR) \"P’ trap complete all as specified and directed. |
| 92 | S&F PVC (SWR) Floor/ Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete as specified and directed. |
| 93 | S&F in repairs, 110mm bore PVC(SWR)bends any radius,complete all as specified and directed. |
| 94 | S&F 110mm bore PVC (SWR) Tee equal or unequal any radius complete all as specified and directed. |
| 95 | S &F PVC (SWR) 75 mm dia vent cowl complete as specified and directed. |
| 96 | S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings complete as specified and directed. |
| 97 | M&L for taking down , chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applyingrust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thk in two coats, using polymer SBR Latex or equivalent as approved @ 5 Ltrs per 50 Kg bag of cement complete all as per manufacturer\"s Specifications/instructionsand as directed.Note :- (New reinforcement or Welded wire fabric) willbe measured and paid separately) Make : Dr. Fixit/Sunanda/chemestik/Fosrok |
| 98 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring finished fair and even to receive floor finishes complete all as specified and directed. |
| 99 | S&F, 1800mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building boardand fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 100 | S & F 2200mmx600mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 101 | M&L for RCC NP3 150mm dia pipes laid on 150mm thick PCC Cradle PCC 1:4:8 bed with excavation in depth 0.70m - 1.65m in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/RCC/Precast RCC with DFRC ventilating cover and frame includes all items and activities to execute and make sewer line functional complete all as specified and directed. |
| 102 | M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound in Grade \"A\" complete all as specified and directed. |
| 103 | Dismantling of 100mm dia cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in niet cemet mortor and taking out to trenches if required complete all as specified and directed. |
| 104 | Taking down carefully copper/aluminium point wiring (Light, fan, socket or power etc.) complete including fitting such as switches, socket, bell pushes, ceiling roses, pendants/batten holder, call bell, regulators etcall as specified and directed by Engr-in-charge. |
| 105 | M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC sheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC sheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge.Note : (a) wiring shall be done by using proper colour coding. |
| 106 | All as per srl item No. 105 here-in-before but for 5 Ampsocket outlet on independent board complete as specified and directed. |
| 107 | All as per srl item No. 105 here-in-before but for 5 Ampsocket outlet on same board complete all as specified. |
| 108 | All as per srl item No. 105 here-in-before but for 6/16 Ampindependent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specified. |
| 109 | M&L modular switch piano, flush type 6 Ampsone way 230 volts complete all as specified. |
| 110 | M&L modular socket outlet3 pin 6 & 16 Ampsflush type 230 volts complete all as specified. |
| 111 | M&L modular switchone way 16 Ampsflush type 230 volts complete all as specified. |
| 112 | S&F, modular fan step type regulator, suitable for 1200mm/1400mm sweep ceiling fan, 2 module complete all as specified and directed. |
| 113 | M&L ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified. |
| 114 | S&F, Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe of size 4mm dia galvanised iron complete all as specified and directed. |
| 115 | M&L modular socket3 pin 6 Ampsflush type 230 volts complete all as specified and directed. |
| 116 | Labour only for Cutting openings, through brick walls for fixing of exhaust fan, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. and rubbish not exc. 50m. Forming jambs, etc. to openings for 300mm to 450mm exhaust fan including cutting in wall fo cement mortar 1:6, toothing, and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed. |
| 117 | Supply and fix of exhaust fan, 230 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. |
| 118 | Supply and fix of exhaust fan, 380 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. |
| 119 | Supply and fix electric water heater, storage type metal body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, 230Volts, single phase, 50 Hz AC, energy saving high density PUF insulation complete with all accessories such as safety valve, thermostate, NRV, inlet and outlet (cold & hot) PVC pipes upto 450mm long, with 15A plug top etc. complete all as specified and directed. |
| 120 | M&L LED compact fitting/batten for single LED tube of 1x20W, 220V, AC decorative box type4ft with integral LED driver including 20W, T8 tube rod complete all as directed by Engr-In-charge. |
| 121 | M&L DB with metal plug and socket single pole and nuetral with MCB SP of 20 Amps, 240 V, 10 KA all as specified and as directed by Engineer-in-charge. |
| 122 | Taking down carefully old unsv submain wiring of any type/any size with PVC conduit or casing caping complete all as specified and directed. |
| 123 | M&L for sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sq mm 02 runs (for Phase & Neutal)alongwith earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 sq mm wire drawn through in & including PVC casing caping or conduit as per site requirement complete all as directed by Engr-In-charge. |
| 124 | Taking down carefully old unserviceable main switches/ Distribution board any type including fuses MCB etc after removing all connection, wires and making good the disturb surface complete allas directed by Engineer-in-charge. |
| 125 | S&F, in repair, Distribution Board SPN 12 way, 240 volts, 200 A factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed. |
| 126 | M&L MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 127 | M&L MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 128 | Disconnecting carefully and taking down the existing ceiling fan of any size, and depositing to MES E/M store for safe custody complete all as directed by Engr-in-Charge |
| 129 | S&F ceiling fans 1200mm sweep energy efficient five star rated 230 volts with blades, down rods, electronic regulator control type and accessories with brushless direct current motor (BLDC) and connecting up with 3 runs of suitable size single core PVC cable from ceiling rose to fan complete all as specified and as directed. |
| 130 | S&F Distribution Board VTPN, 4 way, 415 volts, factory made powder coated, double door with neutral and earth link, including 3 pole MCCB 63 Amps rating, 16KA breaking capacity for incoming supply and provision of MCB SP/TP for out going supplycomplete all as specified and directed. |
| 131 | M&L 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. |
| 132 | S&F, in replacement wall mounted fancy bracket designed decorative glass type LED light with holder B22 new generation, aesthetically designed, ultra modern luminaire with warm white 9/10Watts LED bulb complete all as specified and directed. |
| 133 | Supply & fixing of steel body evaporative Duct Type desert cooler with heavy duty fan motor (ISI marked to IS 996 latest), fan blade of 430mm sweep of aluminum material, 1400 RMP for 2000 cum/hr nominal air capacity,3 Speed Control, wood wool filter pads with well thickness and non-corrosive wire guard for filter pads, submersible pump for lifting water, grill, top of the cooler body is made of galvanized steel sheet of thickness not less than 0.63mm and water tank of minimum 80 liters capacity including sheet thickness not less than 0.80mm with zinc coating and all internal surface of steel body painted with water-resistant paint to IS 9862 latest and 3 pin plug top of 5/6 amps ISI marked, 230 Volts, 50Hz, connecting cable minimum 1.5mtr long complete all as specified and directed. |
| 134 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depthfor foundation of pole,laying of cables etc in Hard and dense soiland getting out complete all as specified and directed. |
| 135 | Returning fillingin including spreading, leveling, watering and well ramming in layer not exc 25 cm complete all as specified and directed. |
| 136 | Removing excavated material not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed. |
| 137 | Removing excavated soft/disintergrated rock to a distance not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed. |
| 138 | S&F, GI tubing, 25mm bore, medium grade, ISI marked with all necessary fittings, laid in trenches/floors complete all as specified and directed. |
| 139 | M&L for pipeChemical earthing withGI pipe electrode 2.25m long having outer pipe nominal dia 80mm & inner dia 50mm dily filled with highly condictive and corrosive compound of required quantity having chemical Betonite 40%, Copper sulphate 20%, Gypsum 5%, Grafite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% Buried in ground digging a bore of 150mm dia surrounded by soil friendly backfill compound non solube in water including PCC pit with RCC cover etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:- [i]Excavation & earth work in any type of soil including removing of surplus material upto 50 M [ii]PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles and testing on completion complete all as specified and directed. |
