Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Material and labour for preparation of old decorative surface of wall etc by washing rubbing down including scrapping and applying one coat of cement base paint of any tint complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material and labour for preparation of old decorative surface of wall including washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil emulsion paint complete all as specified and as directed. |
| 3 | Material and labour for preparation of old decorative surface of wall including washing rubbing down and stopping of distempered and painted surfaces and applying two coat of oil emulsion paint complete all as specified and as directed. |
| 4 | Material and labour for preparation of old decorative surface of ceilings etc by washing rubbing down etc and applying one coat of oil emulsion paint complete all as specified and directed. |
| 5 | Material and labour for complete removal of existing treatment on surface of walls by using appropriate technique as approved by Engineer-in-Charge for complete removal of all layers of treatment and reaching upto old plastered surface and applying a coat of wall care putty not less than 1mm thick as per manufacture instructions and applying two coats of oil emulsion paint over a coat of primer complete all as specified and directed. |
| 6 | Material and labour for preparation of old decorated surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. including cornices, pilasters etc. (Plastered or unplastered surfaces) and applying one coat of exterior emulsioncomplete all as per manufacturers instructions and as directed. |
| 7 | Material and labour for preparing surfaces old plastered surfaces of walls and applying one coat of white washing complete as all specified and directed. |
| 8 | Preparation of old treated surfaces (Plastered or un-plastered) of ceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts, treating oil and greasy spots etc. and applying one coat of white wash on ceiling, complete all as specified and directed. |
| 9 | Material and labour for preparation of old wood and wooden based surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified anddirected. |
| 10 | Material and labour for preparation of old wood and wooden based surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified anddirected. |
| 11 | Material andlabour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 12 | Material andlabour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 13 | Taking down cement plaster on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-charge. |
| 14 | Material and labour for 5 mm thick rendering in cement mortar in (1:3) as in ceiling surface and finished the surface even and smooth without using extra cement including preparation of new plastered surface and applying three coats of white wash complete all as specified and directed. |
| 15 | Material andlabour for 15 mm thick rendering in cement mortar (1:6)on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement including preparation of new plastered surfaces of walls and applying two coats of oil bound distemperon wall, complete all as specified and directed. |
| 16 | Material andlabour for 15mm thick rendering in cement mortar (1:4)on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement with and including two coats of cement base paint over a coatof primer complete all as specified and as directed. |
| 17 | Demolition of lime concrete or cement conrete of any description and in any position as of sunken portion complete all as specified and directed. |
| 18 | Demolition of Cement Concreteas in ground floor and paving not exc. 15cm thick (above or below G.L.) complete all as specified and directed. |
| 19 | Material and labour for rendering 10 mm thick in CM 1:3 and mixed with and including integral waterproofing compound @ 3% by weight of cement and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning of surface complete all as specified and directed. |
| 20 | Material and labour for cement concrete in foundations, filling and mass concrete Type E2 1 : 5 :10 (using40 mm graded stone aggregate) as in sunken floor complete all as specified and directed. |
| 21 | Material and labour for cement concrete in foundations, filling and mass concrete Type C21 : 3 :6 (using40 mm graded stone aggregate) as in under sunken floor complete all as specified and directed. |
| 22 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge. |
| 23 | Material and labour for brick work with sub class \"B\" (old size) bricks, straight or curved on plan, exceeding 6 mtr mean radius built in CM 1:6 including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. |
| 24 | Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Except bricks) complete all as specified and as directed. |
| 25 | Material and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coppings, benching, kerbs, edges etc including necessary form work complete all as specified and directed. |
| 26 | Material andlabour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including15mm thick screed bed or layer in cement mortar 1:6including dismantling of existing tiles etc including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 27 | Material andlabour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 28 | Material and labour forpremium quality coloured glazed ceramic tiles 300mm x 450mm x 7 to 8mmthickas in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles overand including rendering 10mm thick in cement mortar 1:3 finished rough surface to receive tiles including dismantling of existingwall tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 29 | Material andlabour for premium quality, light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed as in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including15mm thick screed bed or layer in cement mortar (1:6) including dismantling of existing tiles etc including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 30 | Material andlabour for premium quality, light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 31 | Material and labour for 15 to 18mm thick Granite (Ist quality) of black shade work (table rubbed, polished & moulding), as in floors, cooking platforms and like bedded with and including 15 mm thick screed bed in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white with admixture of pigment to match with shade of granite stone including grinding and polishing including dismantling of existing stoneslabs including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 32 | Material and labour for 15 to 18mm thick granite (Ist quality) (of any type) work (table rubbed and polished) in steps, jambs, pillars, skirting, on vertical surface and like in 10mm thick rendering in CM (1:3) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding, moulding and polishing on edges etc including dismantling of existing stone /tiles etc including cement mortar bedding andrubbish off the premises complete all as specified and directed. |
| 33 | Material andlabour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, 8 to 9 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including15mm thick screed bed or layer in cement mortar 1:6 including dismantling of existing tiles etc including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 34 | Material andlabour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, 8 to 9 mm thick as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 35 | Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre each (without taking off shutters from frames) and removing from site, including cutting holes in wall / concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. |
| 36 | Taking down chowkats or frames with shutter, areanot exceeding 1.50 Square metre(without taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. |
| 37 | Taking down old unservicable wooden shutter of any descritption exceeding 1.00 sqm each but not exceeding 2.00 sqm each and removal from site including iron mongry, complete all as specified and directed. |
| 38 | Material and labour for taking down shutter of any descriptionexc 1.00 sqm but not.exc 2.0 sqm each and refixing in same opening after necessary repair/easing and adjusting complete all as specified and as directed. |
| 39 | Supply and fixing Factory Made Single Extruded WPC (Wooden Polymer Composite) Solid coloured Board 18mm Thick comprising of virgin polymer of K Value 58 -60 (Suspension Grade), Calcium Carbonate & Natural Fibers (Wood Power / Rice Husk /Wheat Husk) & Non-Toxic Adhesives (Maximum Toxicity index of 12 for 100 gram) having minimum density of 650 Kg/ CUM & Screw withdrawal strength 1800 N (face) & 900 N (Edge), Minimum Compressive strength 50 N/ mm 2. Modulus elasticity 850 N / mm Sq & Resistance to spread of flame of class A category with property of being termite/ borer proof, Water Proof/ Moisture Proof & Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body threated star headed counter sunk SS Screws,solvent cement /adhesive to make kitchen /bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete including taking down of exixting PVC/Wooden board of any type all as specified and directed by Engr–in–Charge. (Note: Stainless Steel butt hinges and necessary SS screws shall be paid separately) Note: Material Test Certificate & Authentication should be provided by the manufacturing company. |
| 40 | Supply and fixing Factory Made Single Extruded WPC (Wooden Polymer Composite) Solid coloured/White Board 6mm Thick comprising of virgin polymer of K Value 58 -60 (Suspension Grade), Calcium Carbonate & Natural Fibers (Wood Power / Rice Husk /Wheat Husk) & Non-Toxic Adhesives (Maximum Toxicity index of 6 for 100 gram) having minimum density of 650 Kg/ CUM & Screw withdrawal strength 1800 N (face) & 900 N (Edge), Minimum Compressive strength 50 N/ mm 2. Modulus elasticity 850 N / mm Sq & Resistance to spread of flame of class A category with property of being termite/ borer proof, Water Proof/ Moisture Proof & Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body threated star headed counter sunk SS Screws,, solvent cement /adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete including taking down of exixting PVC/Wooden board of any type all as specified and directed by Engr–in–Charge. (Note: Stainless Steel butt hinges and necessary SS screws shall be paid separately) |
| 41 | Supply and fixing for lipping 1-1.5 mm thick 18 mm wide colour of approved design and color , fixed with solvent cement or head less nails to PVC door completeall as specified and directed |
| 42 | Supply and fixing continous (Piano) type hinges mild steel bright finish or lectro galvanised with wide of flaps40mm complete all as spd and directed. |
| 43 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position including with MS hold fast/ lugs/SS dash fasteners of required dia and length as per site requirement complete as per direction of Engineer-in-Charge.® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. |
| 44 | Allas per item No. 43.00 hrere in beforebut size 65x100mm complete all as specified and directed. |
| 45 | Allas per item No. 43.00 hrere in before but size 65x125mm complete all as specified and directed. |
| 46 | Supply and fixing of 100mm stainless steel butt hinge complete all as specified and directed. |
| 47 | Supply and fixing 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid coloured decorative type (both side ) flush door shutter of 30mm comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) ® |
| 48 | Supply and fixingFactory Made 30mm thick 100% Solid WPC ( Wood polymer Composite )Coloured (both side)Wiremesh Door Shutter of required size comprising ofvirgin PVC resin of K Value 58-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmmanufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 1800 N ( Face ) & 900 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. For fixing Mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance, scres and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company :For Internal/Balcony/Main Doors. |
| 49 | Material and labourfor factory madebox type steel windows with pressed steel frame complete including mild steel acessories like lugs, door stopper, holdfasts, pintol hinges, handles( minimum One for each shutter), and ISI marked tower bolt 150mm size (minimum 2 for each shutter) etc. with or without glazing barsdovetailed or welded with one shop coat of zinc chromate primer, complete all as shown on drawing No. TD-276(R), Sheet No 1/4 to 2/4, 3/4, 4R/4 and as specified and directed by Engineer-in-Charge.Note: (i) Window Fabrication shall be as per TD-276 (R) SH 1/4 to 2/4, 3/4, 4 (R) /4 and these drgs may be referred from GE office.(ii) Mode of measurement Unit will be in Kilogram for the complete window except Glass/ Gauge but incl fittings, ISI marked iron mongery and Grill/ Guard bar complete as per TD. The weight of windows will be finalized by the BOO to be convened by GE. The weight shall not include PCC back filling of the chowkhat.(iii) The PCC back filling in chowkhat of window, Sheet glass and wire gauge will be measured and paid separately against respective items. |
| 50 | Supply and fixing anodised aluminium window and ventilator shutters,fixed type without sash bar,aluminium section weighing 0.55 Kg/mtr including necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws etc complete all as specified. |
| 51 | Supply and fixing stainless steel handle of size 150 mm long complete all as specified and directed. |
| 52 | Supply and fixing 200 mm long stainless steel barrel tower boltscomplete all as specified & directed. |
| 53 | Supply and fixing stainless steelsliding door bolt with hasp, staple (bolt type) 250 mm longand fixing with bolts extruded sections complete all as specified & directed. |
| 54 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-charge. |
| 55 | Supply and fixing Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engineer-in-charge. |
| 56 | Supply and fixing in repair stainlesssteel curtain rod (Grade 304) 25mm dia having wall thickness 1.6mmfixed with and including stainless steeldecorative brackets, two lotto for each rod length at both endetccomplete all as specified and as directed by the Engineer-in-Charge. |
| 57 | Supply and fixing in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden beads supplied with shutters complete all as specified and directed by Engineer-in-charge. |
| 58 | Supply and fixing in repair of sheet glass 4 mm thick, ordinary quality and glazing with oil putty, in square not exceeding 0.5 Sqm each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified and as directed .NOTE:-Glasswill be fixed up to 12 Mtr height bldgs. |
| 59 | Supply and fixing in repair of 4 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq. m in each pane with oil putty or fixed with beads complete all as specified and directed. NOTE:-Glasswill be fixed up to 12 Mtr height bldgs. |
| 60 | Supply andfixing for sheet glass 4mm thick, pinheaded type and glazing with oil putty or wooden beads in square not exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge. |
| 61 | Supply and fixing stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden beads supplied with shutterscomplete all as specified and directed by Engineer-in-charge. |
| 62 | Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 63 | Supply and fixing in repair of PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outer dia metre outlet of 75 mm complete all as specified and directed. |
| 64 | Supply and fixing in repairs PVC (SWR) 110 mm pipe type A single socket in any length with rubber ring joints fixed to wallsincludingdismantling of existing pipes of any description any length complete all as specified and as directed. |
| 65 | Supply and fixing PVC in repair (SWR) 75 mm pipe type A single socket in any length with rubber ring joints laid in floors or trenches includingdismantling of existing pipes of any description any length complete all as specified and as directed. |
| 66 | Supply and fixing 110mm dia stack clamps made out of 50mm by 5mm flat iron and 16mm dia around iron stays,including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 67 | Supply and fixing in repairs of PVC (SWR) bends 110 mm bore complete all as specified and as directed. |
| 68 | Supply and fixing in repairs of PVC (SWR) bends 75 mm bore complete all as specified and as directed. |
| 69 | Supply and fixing in repairs of 110 mm bore PVC (SWR) junction single T (equal or unequal), including jointing with solvent cement, complete all as specified and directed. |
| 70 | Supply and fixing in repairs of 75 mm bore PVC (SWR) junction single T (equal or unequal), including jointing with solvent cement, complete all as specified and directed. |
| 71 | Supply and fixing in repairs of 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 72 | Supply and fixing in repair of 75/100 mm dia CP grating with hole /without hole as per site requirement fixed in floor and jointed in CM 1:3 complete all as specified and as directed. |
| 73 | Supply and fixing in repair of stop valves, 15 mm dia, chromium plated, fancy type, screwed down, high pressure with capstain head, (concealed type) with long shank, screwed both ends for iron pipes or for unions, complete all as specified and directed. (Note : Weight of stop valve shall not be less than 0.575 Kg) |
| 74 | Supply and fixing in repair of 15 mm dia bib tap long body cast copper alloy, chromium plated` with flange complete all as specified and directed. |
| 75 | Supply and fixing in repair door seal PVC 30mm wide with foam complete all as specified & directed by Engineer-in-Charge. |
| 76 | Supply and fixing in repair of flush pipes to pedestal pan, including all joints complete all as specified and as directed. |
| 77 | Supply and fixing in repairs PVC waste pipe for wash hand basin / kitchen sink of dia 32/40 mm of required length at site complete all as specified and as directed. |
| 78 | Supply and fixing of GI tubing, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. |
| 79 | Supply and fixing of GI tubing, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. |
| 80 | Refixing old serviceable steel water tubing of 15 mm bore, in new or old position,any grade, including Supply and fixing new fittings as required, fixed to walls and ceilings or laying in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing where ever required , including taking down of old tubingexisting at site and removal, complete all as specified and as directed. |
| 81 | Refixing old serviceable steel water tubing of 20 mm bore, in new or old position,any grade, including Supply and fixing new fittings as required, fixed to walls and ceilings or laying in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing where ever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed. |
| 82 | Supply and fixing in repair vitreous chainaware Dome (S-30) concealed floor trap mounted, star white colour, EWC pedestal pattern alongwith and including premoulded vitreous china ware cistern, seat cover etc complete all as specified and directed. |
| 83 | Cleaningand Removing all scaleand dirt, etcfrom existing water storage tanks of capacityexceeding 250 litres andnot exceeding 500 litres by emptying,drying and cleaning the tank by scrubbing the dust with wire brush from tank includingcleaning from mouths of circulating pipes, to entire satisfaction of Engr-in–chargeof cleaning ,including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm, complete all as specified and directed (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE: - (i) The whole process ofdisconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due.(ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it. |
| 84 | Cleaningand removing all scaleand dirt, etcfrom existing water storage tanks of capacityexceeding 500 litres andnot exceeding 1000 litres by emptying,drying and cleaning the tank by scrubbing the dust with wire brush from tank includingcleaning from mouths of circulating pipes, to entire satisfaction of Engr-in–chargeof cleaning ,including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm, complete all as specified and directed (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE: - (i) The whole process ofdisconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due.(ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it. |
| 85 | Supply and fixing Chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete including taking down existing pipe of any type all as specified and directed by Enge in Charge. |
| 86 | Supply and fixing in repair for stainless steel 304 grade wire basket cutlery of size 370 x 485mm premium quality fixed in position complete all as specified and directed by Engr–in–Charge. |
| 87 | Supply and fixing in repair for stainless steel 304 grade wire basket (average weight 2.5 to 4 Kg per Basket) of pull out type like plain /cup & saucer /bottle /multi purpose /2–3 shelf basket etc for kitchens of required size fixed in position complete all as specified and directed by Engr–in–Charge. |
| 88 | Supply and fixing in repair for Ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete all as specified and directed by Engr–in–Charge. |
| 89 | Supply and fixing for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finishedcomplete all as specified and directed by Engr–in–Charge. |
| 90 | Supply and fixing forsoft Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed by Engr–in–Charge. |
| 91 | Supply and fixingof 5 mm thick solid coloured/textured PVC sheet,SolidPVC wall paneling/ liningPVC sheet inclusive of solvent cement and fixing at site with and including5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and directed including taking down ofexisting wall lining, board or insulation boardincluding cover fillets of any type and thick complete all as specified and as directed. |
| 92 | Material and labourfor providing cement concrete 1:3:6 type B-0 using 12.5 mm graded stone aggregate as in filling in the back side of frame ofbox type steel window complete all as specified and directed. |
| 93 | Dismantling/taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc. complete all as specified and directed. |
| 94 | Material and labour for point wiring in existing conduit using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSHPVC insulated and unsheathed stranded cable drawn through inexisting non metallic/metalicmedium grade concealed/Surface conduit and including replacement of its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI metal flush boxes made out of 1.2mm thick of any module from 2 to 18module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paintincluding modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over metal flush boxes for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbedsurfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathedFRLSH copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dollywith suitable size of lugs for one light point/ fan point/Bell Point controlled by one switch complete all as specified and as directed.NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately. |
| 95 | Description all as per item No 94.00 here in before but for socket out let point 6 Amps on same board complete all as specified and directed. |
| 96 | Description all as per item No 94.00 here in before but for socket out let point 6 Amps on independentboard complete all as specified and directed. |
| 97 | Description all as per srl item No 94.00 above but point wiring for onesocket out let 15&5 Amps (independent) controlled by one switchwith using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed. |
| 98 | Supply and fix modular switches, one way,6 Amps one module, 230V, 50 Hz supply, complete all as specified and directed. |
| 99 | Supply and fix modularswitches, oneway, 16 Amps, one module, 230 volt , AC supply, complete all as specified and directed. |
| 100 | Supply and fixmodular socket outlet 6 Amps, 2/3 pin combined 2 module, 230 volt, complete all as specified and directed. |
| 101 | Supply and fix modular socket outlet 16 Amps,3 pin, 2 module, complete all as specified and directed. |
| 102 | Supply and fix fan regulator step type one module / 2 module, 100 W, 230 Volts, 50 Hz, AC complete all as specified and directed. |
| 103 | Supply and fix modular switches, bell push,6 amps one module, 230V, 50 Hz supply, complete all as specified and directed. |
| 104 | Supply and fix modular blanking plate 1 module complete all as specified and directed. |
| 105 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and including medium grade, PVC conduit not less than 20 mm dia with FRLSH accessories, concealed on wall/ceilingand including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.2 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existing for one light/fan point/bell point controlled by one switch. NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately . 2. All chases will be cut by chase cutter only. |
| 106 | Description all as per item No 105.00 here in before but for socket out let point 5 Amps on same board,complete all as specified and directed. |
| 107 | Description all as per item No 105.00 here in before but for socket out let point 5 Amps on independentboard,complete all as specified and directed. |
| 108 | Description all as per item No 105.00 above but with 2.5 Sqmm cable for 3pin 15 Amps switch socket outlet (Power Point),complete all as specified and directed. |
| 109 | Supply and fixing switch piano 5 Amps, flush type, single pole, one way,230 volt , AC supply, complete all as specified and directed. |
| 110 | Supply and fixing switch piano 15 Amps flush type one way 230 Volts,50 Hz , AC supply, complete all as specified and directed. |
| 111 | Supply and fixing bell push 5 Amps, flush type, single pole, one way, 230 volt , AC supply, complete all as specified and directed. |
| 112 | Supply and fixing socket outlet 3 pin 5 Amps, 230 volt. flush type,complete all as speciied and directed. |
| 113 | Supply and fixing socket outlet 2 in 1, 6 pin 5 /15 Amp and multi pin flush type, complete all as specified. |
| 114 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. |
| 115 | Supply and fixing fan regulator electronic step type ,230 Volts, AC supply, suitable for ceiling fan any type/make/sweep, complete all as specified and directed. |
| 116 | Supply and fixing door bell electric ,ding dong /musical type, single phase 230 volts, ISI marked complete all as specified. |
| 117 | Supply and fixing sheet metal enclosure SP with two pin and earth plug and socket inclduing metal clad topwith one single pole MCB 20/32 Amp complete all as specified and directed. |
| 118 | Supply and fixing of LED light fitting 1x20W , 220V, AC with aluminium housing with batten type with driver , holder including 20W LED tube light for connecting up with three core flexiable copper conductor cable of suitablae size from celing rose to connector complete all as specifid and directed |
| 119 | Supply and fixing channel for fixing of LED tube rod of CRCA body suitable for 18/20 watt LED tube, high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. ( Tube rod shall be measured and paid for separately ).Note: - Channelmust be get approved from Engr in charge to check fesibilty i.e. one end contact or both end contact |
| 120 | Supply and fixing in repair 18 W/ 20WLED tube rod, environment friendly, high efficient, T8 with aluminium extrusion heat sink for optimum performance with high luminous efficiency and easy and taking down existing tube light and removal complete all as specified and directed. Note: - Tube rod must be get approved from Engr in charge to check fesibilty i.e. one end contact or both end contact for fixing in existing LED fittings . |
| 121 | Supply and fixing batten type withsurface mounted LED tube light fitting with high efficient diffuser mirror light,in CRCA body suitable and including 10 watt LED light high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. |
| 122 | Supply and fixingbulk head light fitting, 10 watt, energy efficient with10 watt LED light with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting completeincluding disconnecting and taking down old existing light fitting of any descriptioncomplete all as specified and directed. |
| 123 | Material and labour for taking down existing lighting fiting any type/size/Make/capacity i.e T/L, Surface/ Recess Panel, flame proof, wall light, bulk head, mirror light etc and re-fixing the same after minor repair/cleaning including replacement connection wire with suitable size coper wire twin core 0.75 sqmm for connection from ceiling rose to light fitting complete all as specified and directed. |
| 124 | Supply and fixingbracket for security light made up of 25/40 mm dia suitable for security light, 0.6 metre long GI pipe,light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed. |
| 125 | Supply and fixingLED security light luminaire 45 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mmcopper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down oldunserviceable security light fitting of any description and in any position complete all as specified and directed. |
| 126 | Supply and fixing LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDshaving optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mmcopper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down oldunserviceable security light fitting of any description and in any positioncomplete all as specified and directed. |
| 127 | Material and labour for sub main wiring with two single core FRLSH PVCinsulatedunsheathed copper conductor cable 2.5 sqmm drawnin and including rigid non metallic PVC medium grade 20 mm dia concealed conduit with accessories onwall or ceiling withone additional PVC insulated , strandedcopper conductor FRLSHof 2.5 sqmm,green colourfor earthcontinuity conductor including taking down old unserviceable sub main wiringand making good the disturbed surface complete all as specified and directed. NOTE: - 3 run of 2.50 sqmmcable with concealed conduct shall be measured as 1 unit. |
| 128 | All as per Item No 127.00 here in before but for Material and labour for sub main wiring of 6.00 sqmm NOTE:-3 run of 6.0 sqmmcable with concealed conduct shall be measured as 1 unit. |
| 129 | All as per Item No 127.00 here in before but for Material and labour for sub main wiring of 4.00 sqmm. NOTE:- 3 run of 4.0 sqmmcable with concealed conduct shall be measured as 1 unit. |
| 130 | Supply and fixing in repairSPN distibution board 8 way, double door, IP 43, as per IS 8623including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles /gland/gaskets complete all as specified and directed. |
| 131 | Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 6 to 32 Amps, complete all as specified and directed. |
| 132 | Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 40 to 63 Amps, complete all as specified and directed. |
| 133 | Supply and fixing in repair MCB single pole and neutral 240 volts, 40 to 63 Amps,10KA, 50 Hz, complete all as specified and directed. |
| 134 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable circulat of size 10Sqmm including all incoming and outgoing connection with proper size of thimble complete all as directed and specified. |
| 135 | All as per Item No 134.00 here in before but one twin core cable circulat of size 06Sqmm complete all as directed and specified. |
| 136 | Supply and fixing of LED based Bollard light 10 watt with aluminium pipe housing with glare free PMMA Diffuser, IP 65 of height not less than 600mmincluding necessary excavation & PCC work etc complete including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. |
| 137 | Supply and fixing of LED lamp 9 watt B-22 base complete including taking down old existing lamp any type complete all as specified and directed. |
| 138 | Supply and fixing of LED lamp 12 watt B-22 base complete including taking down old existing lamp any type complete all as specified and directed. |
| 139 | Disconnecting and taking down old existing wall light fitting of any description and in any position and supply and fixing aesthetically designed wall bracket light of metal base with glass and B22 holder including 7 watt LED lamp Warm White & clear diffuser including connecting up with three core 1.5 sqmm flexible copper conductor cable complete all as specified and directed. |
| 140 | Supply and fix in repair post top lantern LED 30/35 W , cast aluminium spigot, with high effieient LED light, with poly carbonate diffuser, complete with high efficient LED 30/35 W and accessoriesinternally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable including disconnecting and taking down existing light fitting and removal complete all as specified and directed. |
| 141 | Supply only temperature resistent SS braided pipe suitable to sustaine pressure up to 8 barnot less than 60 Cm long suitable forout going / Hot water connections of Geyser with washer etc. complete all as specified and directed. |
| 142 | Supply and fixingin repair switch piano 5 Amps, flush type, single pole, one way,230 volt, AC supply, complete all as specified and as directed. |
| 143 | Supply and fixingrepair switch piano 15 Amps flush type one way 230 Volts,50 Hz , AC supply, complete all as specified and as directed. |
| 144 | Supply and fixingin repair socket outlet 3 pin 6 amps, 230 volt. flush type,complete all as specified and as directed. |
| 145 | Supply and fixing in repair socket outlet 2 in 1, 6 pin 5 /16 Amp and multi pin flush type, complete all as specified and as directed. |
| 146 | Supply and fixing in repair switch modular 6 amps, one way single module with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and as directed. |
| 147 | Supply and fixing in repair switch modular 16 amps, one way single module with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and as directed. |
| 148 | Supply and fixing in repair socket modular 6 amps, 5 pin combined universal socket 2 module with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and as directed. |
| 149 | Supply and fixing in repair socket modular 6/16 amps, 2 in 1, combined universal socket 2 module with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and as directed. |
| 150 | Material and labour for taking down Ceiling fan/Exhaust fan of any size/ sweep after disconnecting the wire from existing ceiling rose dismentaling of blades and deposited to store for repair all as specified and directed. |
| 151 | Supply and fixing in repair fan condencer 2.5MFD, 240 volts suitable capacity for ceiling/ exhaust Fanall as specified and directed. |
| 152 | Material and labour for servicing and refixing of ceiling fan including servicing/ varnishing painting of ceiling fanusing synthetic enamel paint in two coat over one coat of primer of any make/sweep/model etcafter cleaning/washing and fill up cavities using filler complete all as specified and directed. |
| 153 | Material and labour for servicing and refixing only exhaust fan any type/ sweep after repair/ servicing and connecting up including provision of cable from ceiling rose to connector to fan including refixing of blades, louvers etc all as specified and directed. |
| 154 | Supply and fixing of plastic body exhaust fan, AC singal phase,240 volts of size 250 mm sweep with heavy duty, plastic body with louvers connecting up including provision of fixing clamp, nut bolts and cable from ceiling rose or connector to fan,including taking down old unserviceable pastic body exhaust fan complete all as specified and directed. |
| 155 | Disconnecting and taking down old existing wall / surface light fitting of any description and in any position and Supply and fixing surfacemounted type metal base with finished and disgnied diffuserof round/ square/ oval shape slim down lighter 12 watt LEDincluding suitable capacity driver complete connecting up with three core 1.5 sqmm flexible copper conductor cablecomplete all as specified and directed. |
| 156 | NOTE:- Amount of credit ofRs. 54,481.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 & 20 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
