|
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. |
| 3 | M & L forPowder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 4 | M & L forPowder coated (minimum thickness of powder coating 50 micron) aluminiumwindow and ventilator (adequate track)/Shutter without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coatedaluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately. |
| 5 | Supply & Fixing solid PVC door frame of size50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed. |
| 6 | S &F for factory made solid panel PVC door shutter 30mm thick ( style) consisting to framemade out ofM.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC\"C\"channel having a PVC sheet strip of 20 mmwidth struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed. |
| 7 | S/F Factory madesingle extruded WPC (Wood Polymer Composite ) solid plain flush door shutter of 30 mm size class A category with property of being termite /borber proof ,water /moisture proof and fire retardant anf fixing with stainless steel butt hinges of required size wit necessary full body threaded star heaaded counter sunk ss screws all as per direction of engineer in charge completeall as specified and directed.. |
| 8 | S&F in repair for floor door stopper of brass body and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring , fixed to shutters complete all as specified and as directed. |
| 9 | S&F for butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised of100 mm sizeand fixed type C-21complete all as specified |
| 10 | S&F for Extruded aluminium alloy handle of 150 mm size fabricatedtype, anodised complete all as specified.. |
| 11 | S&F for aluminium anodised barrel tower bolt of 150mmof extruded section complete all as specified. |
| 12 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 13 | S&F 4.8 mm thick tinted glassof selected qualityin square not exceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beadingcomplete all as specified and directed |
| 14 | S&F galvanised wire cloth, 0.48mm nominal dia of wire and average width of aperture 1.18mmand fixed with tinned tacks or galvanisedstaples complete all as specified and directed |
| 15 | S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290,E-165 , complete all as specified and directed. |
| 16 | Demolition of cement concreteof any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed. |
| 17 | Demolition of cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable of mateial complete all as specified and directed. Note:Demolition material throughout MOD Land rate include above item |
| 18 | Excavation over area as in soft / loose soil nexc 1.5 m deep and getting out complete all as specified and as directed. |
| 19 | Dismantiling of stone slabs and tiles (Kota stone etc.)of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc.laid bedded and pointed in any mortar complete all as specified and directed. |
| 20 | Dismantling floor, hearth or wall tilingof any description and in any positionincluding cement mortarbedding (but not backing) complete all as specified and directed. |
| 21 | M&L moorum /red bajri filling in floors or paving laid in layers n exc 15cm thick spread leveled and rammed including watering complete all as specified and directed by Engineer in charge. |
| 22 | M&L 75mm thick PCC (1:3:6) Type C2using 40mm graded stone agg as in plinth protection/Path etc surface even and smooth without using extra cement including oint sealing compound of grade A complete all as specified and as diected by engineer in charge. |
| 23 | M&L25 mm thick cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) as infloors,finish rough to receive th\e floor finishes etc complete all as specified and as directed. |
| 24 | M&L Granite slab18 mm to 20 mm thick machine cut, bedded and joined withcementand pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bedCM (1:3) .the shade of granite stone including cutting and polishing type as incill and jamb/skirting, steps cooking plateformsincludigng rounding off the exposed edges and polishing all asspecified and directed.. |
| 25 | M&L for digital glazed ceramic tiles, coloured tiles 300mm x 600 mm x 7mm thickon vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3)completeall as specified and directed. |
| 26 | M&L for non skid ceramic tiles, joint free, coloured tiles7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 27 | M&L for machine cut Kota stone slab 18 mm to 22 mm thick , as in flooring,laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed. |
| 28 | M&L for machine cut kota stone slab 18 mm -22 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coatin CM (1:4) complete all as specified and directed. |
| 29 | M&L for vitrified ,coloured and printedtilesDark shade Double charged of8 to 10 mm thick (Square / Rectangular ) polished area of each tilesexceeding 0.42 Sqm but not exceeding 1.00 sqm as in flooring over and including 15 mm thick cement screed in (1:6 ) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 30 | M&L for vitrified ,coloured and printedtiles Double charged of8 to 10 mm thick as in skirtingfixed over and including 10 mm thick backing coat in (1:4 ) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 31 | S&F 5mm thick hollow wall panelling plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of solvent cement and fixing at site including disconnecting and refixing of electric light board complete all as specified and as directed. |
| 32 | Taking downcement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed. |
| 33 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and fair without using extra cementcomplete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQas\"supply only \" |
| 34 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cementcomplete all as specified and as directed. |
| 35 | Supply only Liquid water proofing compound complete all as specified and as directed. |
| 36 | M&L fornew plaster surfacesof walls applying two coats of exterior emulsion acyrlic weatherproof antifungal paint over a coat of exterior grade primer (including putty ) upto 08 meter height of the bldg, complete all as specified and directed. (Make -Asian Apex, Berger) |
| 37 | M & L for two coat of oil bound emulsion paint over a coat of Birla wall care putty on plastered surfaces on wall incl. preparation of surfaces complete all as specified and directed. . |
| 38 | M&L Complete removal of existing treatment(internal and external suraces) on wallsby scrapping with steel wire brush or any other means including onecoat of wall care putty on wall andapplying two coat ofoil emulsion complete all as specified and directed by Engineer -in-Charge. |
| 39 | Material and labour for Preparation of old decoratedsurface of walls of plastered or unplastered surfaces bybrooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots andapplying two coat of white wash complete all as specified and directed by Engineer -in-Charge. |
| 40 | M&Lpreparation of surfaces of walls by scrapping/sand preparing / rubbing and finally washing with wateringand applying two coats of exterior emulsion acyrlic weatherproof antifungal paint over a coat of exterior grade primer upto 08 meter height of the bldg, complete all as specified and directed. (Make -Asian Apex, Berger) |
| 41 | M&L for preparation of the newly plastered surfacesof wall & applying3 coats of white wash on Walls surfaces complete all as specified and directed. |
| 42 | Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed. |
| 43 | Demolition and breaking drain pipe (salt glazed stoneware) of 150mm dia set in cement mortar including packing under and haunching against side of pipe complete all as specified and as directed. |
| 44 | M & L cement concrete bed to drain pipe 150mm dia including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and as directed. |
| 45 | S&F for reinforced concrete pipes 200 mm bore class NP-2 laid and jointed with collar in CM 1:1 complete all as directed by Engr-in-Charge |
| 46 | M & L PCC 1:2: 4 type B-1 using 20 mm graded store aggregate as in surface channel, drains etc including use and waste of form work where necessary complete all as specified and as directed. |
| 47 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using forms, moulds, mitred/stopped ends etc. |
| 48 | Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed. |
| 49 | M&L precastre-inforced CementConcrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for man holes,Shelvesetc set in cement mortar 1:6 including necessary form work complete all as specified and directed. |
| 50 | Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 51 | Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5Km above the starting point with soil complete. |
| 52 | M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6). (EXCEPT BRICS ONLY) |
| 53 | M&L brick work with fly ash \"bricks(FASB) confirming to IS 12894, of strength M-10 straightor curved on plan exc 6m mean radiusbuilt cement mortar 1:6 complete all as specified and as directed. |
| 54 | Surface excavation n.exc. 30 cm deep and av. 15 cm deep and getting out in any type of soil complete |
| 55 | M&L for PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete, complete all as specified and directed. |
| 56 | Material and labour for providing and laying60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 57 | M&L for cement concrete ( 1:2:4) type B-1 (20mm graded agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railingsupto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed. |
| 58 | M&L for preparation surfaces for building Nosand applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and as directed. |
| 59 | Dismantling of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed. |
| 60 | S&FFalse ceiling4 mm thick HPSC pre-prime non asbestos fibre cement building board ( size 600mm x 600 mm/ 595 mm x595 mm ) decorative finish fixed with clips and screw includingpowder coated galvanised MS grid frame work false ceiling of ( Main Tee size 32mmx20mmx0.45mm cross tee 24mmx24mmx0.30mm andwall angle19x19x0.30 mm) and with slot for fixing including suspended with1.25 mm dia. GIwirehangers fixed with steel dash through fasteners from purlineof the roof complete all as specified and as directed. |
| 61 | Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed. |
| 62 | S&F Pre painted galvalum sheet 0.50 mm thick havingaluminum zinc coating 150 gsm/ sqm corrugated steel sheetany colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all asdirected by Engineer -in -charge. |
| 63 | S&F Pre painted galvalum sheet 0.50 mm thick havingaluminum zinc coating 150 gsm/ sqmplain steel sheetany colour having tensile strength of 550 Mpa as in Roof covering /cladding (ridge) to wall fixed with self tapping screws complete all asdirected . |
| 64 | M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing postincluding cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed |
| 65 | Dismantling timber scantling, framed /un framed workof 40 sq. cm and over in section in any position complete as directed. |
| 66 | Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed. |
| 67 | S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed |
| 68 | M&L for two coats of synthetic enamel paint over a coat of red oxideprimer on new steel surfaces over 10 cm width or girth including preparation of new surfaces. |
| 69 | Cutting of cracks to V section in existing wall surface, cleaning out, wetting, grouting with cement and sand slurry 1:3 etc complete all as specified and directed. |
| 70 | M&L forreinforced cement concrete nominal mixtype B1 (1:2:4)( using 20 mm graded stone aggregate ) as in beams , cantilevers bressummers , lintel over 1.5 m span etc. complete all as specified and directed. |
| 71 | M&L for use and waste Formwork to sides & soffits of floor or roof beam rough finishedsurfaces of concretecomplete all as specified and directed. |
| 72 | S&F mild steel bars 10 mm dia and over (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and directed. |
| 73 | S&FTMT bars 6 to 8 mm diacut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and directed. |
| 74 | Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and directed. |
| 75 | S&F in repair 18/19mm thick WPC board, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work includingbeading on cutting /exposed edges, polishing for cupboard shutter including following hardware:-Make : Rajshri /Black Cobra |
| 76 | S&F for aluminium anodised barrel tower bolts of extruded section of 100mm size, complete all as specified and directed. |
| 77 | S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed. |
| 78 | S&F for extruded aluminium alloy handle of 100 mm size fabricatedtype, anodised.complete all as specified . |
| 79 | S&F for Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size sixed with screw complete all as specified . |
| 80 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 81 | Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed. |
| 82 | Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified and directed. |
| 83 | Supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed |
| 84 | Supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wallor laid in floors complete all as specified and as directed |
| 85 | S&F for as in repairviterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed. |
| 86 | S&F in reapir plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed. |
| 87 | S&F for in repairsofvitreous china wash basin, white, , size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap andPVC connection will be measured paid separetly. |
| 88 | S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed. |
| 89 | S&F for in repairs15mm,pillar taps ISI Mark Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe complete all as specified ..MAKE : Neptuneseries of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 90 | S&F for in repairs 15mm angle cock ISI Mark chromium plated,cast copper alloy, with brass ceramic disc spindleand capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe fixed and complete all as specified ..MAKE : Neptuneseries of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 91 | S&F for 15mm ,bib tapISI Mark Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe fixed in repair and complete all as specified .MAKE : Neptuneseries of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 92 | S&F for in repairsvitreous china urinals, Half stall type ,whitewith grating and union for discharge pipecomplete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. |
| 93 | S&F for in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed. |
| 94 | S&F for in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed. |
| 95 | S&F for peg set of six S.S.fixed to wall with PVC plugs and screw, complete all as specified and directed. |
| 96 | Supply only15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed. |
| 97 | S&F in repair Health faucet with1.00 metre tube ( Branded tube ) including flexible pipe and brass chromium plated nuts completed all as specfied and directed Make Prayag cat No BEA-40Sor equivenet in other make |
| 98 | S&F for in repairs mild steel Chromium plated grating 100 mm dia, fixed in repair, complete all as specified and directed. |
| 99 | S & F 1000ltr rotational moulded polyethylene water storage tanks,(cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe light grade washout pipe 450 mm long with plug and 20 mm dia GI pipe light grade over flow pipe 600 mm long with fitting and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed. |
| 100 | S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 101 | S&F for in repair gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed. |
| 102 | S&F 5mm thick, 600mm wide rounded edge mirror of selected quality glass, with back polishig mounted and fixed with stainless steel decorativecap wahsers and screws set fixed on PVC rawl plugs complete all as specified and directed. |
| 103 | S&F 25mm dia stainless steelcurtain rod not less than 0.80mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) & end Knobs complete all as specified and directed by Engr in Charge |
| 104 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc.,(measured overall as fixed along the centre line over fittings and accessories)complete all as specified. |
| 105 | S&F for 110mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,fixed to walls complete all specified. |
| 106 | S&F for 75 mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,fixed to walls. complete all as specified . |
| 107 | S&F for 75 mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified . |
| 108 | S&F for 110mm dia PVC(SWR)pipes bends any radious \ complete all as specified and directed. |
| 109 | S&F for 75 mm dia PVC(SWR)pipes bends any radious. complete, complete all as specified and directed. |
| 110 | S&F for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed. |
| 111 | S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 112 | M&L for 75 mm dia of out letPVC (SWR) floor trap plain withCP grating including jointing with solvent cement as in repair complete all specified. |
| 113 | M&L for PVC (SWR) gully trap 125 /100plain with gratingincl. jointing with solvent cement as in repair, complete all as specified and directed. |
| 114 | S& F Framed work ORNAMENTAL AND INTRICATE DESIGN such as grills,gratings, etc.. with ends of barss shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 115 | Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all asdirected . |
| 116 | M & L Providing precast cement concrete louvres and jallies,25mm thick (measured solid) Type B0 (1:2:4 12.5mm graded aggregate set in CM 1:6, including all mould- ings butexcluding frame complete all asdirected . |
| 117 | M&L Providing precast cement concrete Type C1 (1:3:6 20 mm graded aggregate) in win- dow or door cills, ntels,bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, Watherings, throat- ing etc. and setting in mortar complete with joints to match |
| 118 | Taking down carefully copper/ aluminium point wiring (light, fan, socket, or power) complete fitting such as switches, ceiling roses pendants, regulators, sockets, light fitting ceiling fan etc to be measured seperately ) removing materials for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperatly) and making good disturbed surface of walls floors etc all as specified and directed. Note-Responsibility after taking down fan/exhaust fan keep in safe custody of contractor and refix the same afterbefore completion of work the rate of same deemed to be included in the item quoated rate. |
| 119 | Taking down carefullyexisting wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size anycapacity fromboards completeall as specified and as directed. |
| 120 | Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed. |
| 121 | M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dollywith3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed . |
| 122 | Ditto all as per item No 122 above but One 3/5 pin5 Amp socket outlet point controlled by one switch on independent board. |
| 123 | Ditto all as per item No 122 above but One 3/5 pin5 Amp socket outlet point controlled by one switch on same board. |
| 124 | Description all as per item No 122 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 125 | S&F switch pianoflush button type 5 Amp single pole one waycomplete all as specified and asdirected. |
| 126 | S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and asdirected. |
| 127 | S&F switch piano flush button type 15 Amp single pole one way complete all as specified and asdirected. |
| 128 | S&F socket outlet2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and asdirected. |
| 129 | S&F ceiling rose,surface bakelite 63 x50mm three terminals completeall as specified and asdirected. |
| 130 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed |
| 131 | S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx\"B\" to PS . |
| 132 | M&L, sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.(NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 133 | S&F sheet metal enclosure double doorconcealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 8 ways 240 V complete all as specified and as directed . |
| 134 | S&F MCB single pole and neutral 40 Amp / 63 Amp 240 V ,10KA , \"C\" series, complete all as specified and as directed with copper lugs complete all as specified and as directed . |
| 135 | S&F MCB single pole 6 to 32Amps 240 V,10KA, \"C\" series,complete all as specified and as directed |
| 136 | S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as outgoing Nos of modules DPX 125+12, including 125 Amp MCCBcomplete all as specified and directed. |
| 137 | S&F MCCB 4 pole, 415V, AC , 3 phase, 50 HZ, breaking capacity 16 KA with fixed thermal and fixed magnetic setting of capacity 63 Amps 100% ICU complete all as specified and as directed. |
| 138 | Supply and fix LED 35/36 W building security light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminiumIP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtrlength with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesinglecorePVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and directed. |
| 139 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. |
| 140 | Supply and laying GI pipe 50mm bore \"LIGHT GRADE\" in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and as directed. |
| 141 | Supply and fixing in repair 22 W LED 6000k4 feet Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge. |
| 142 | Supply and laying or fixing or passing through HDPE pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel or strip and overall PVC sheathed,16 sq mm 4 core ISI Marked as per IS 7098 (Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed. |
| 143 | Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and as directed. |
| 144 | M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. |
