|
| 1 | Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed. |
| 2 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises complete all as specified and directed. |
| 4 | Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 5 | Taking down chowkhat or frames with shutter (withouttaking off shutter from the frame ) area exc 1.5 Sqm but n. exc 4.0 Sqm each complete with hold fasts etc complete all as specified and directed. |
| 6 | Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed. |
| 7 | M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 8 | M&L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed. |
| 9 | All as per item No. 08 here in before but except stone complete all as specified and directed. |
| 10 | Extra over stone masonary for hammer dressing to face beds and joints mixmum depression on face (sand stone) n. exc 20mm depression etc complete all as specified and directed. |
| 11 | M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound, on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed (WPC measured and paid separately) |
| 14 | Dismantling loose / disintergrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even complete all as specified and directed. |
| 15 | M&L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed. |
| 16 | M&L 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed. |
| 17 | M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 18 | M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 19 | M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exceeding 0.11 Sqm but not excceding 0.18 Sqmset and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed. |
| 20 | All as per item No.17.00 above but in skirting over 10mm thick screeding in cement mortar 1:4 complete all as specified and directed. |
| 21 | M&L for machine cut kota stone slab, 20-25mm thick over and including 15mm thick screed bedding in cement mortar 1:6 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified. |
| 22 | M&L for machine cut kota stone slab in skirting / steps / risers of reqd size, 20 to 25mm thick & including 15mm thick screed bedding in cement mortar 1:4 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed. |
| 23 | M&L RCC, type B-1 (1:2:4) using 20mm graded aggregate in, slab supported on wall, walls beams and columns in floors, roof landings complete all as specified and directed. |
| 24 | M&L TMT bars of 6 to 8mmdia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed. |
| 25 | Use of waste form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab not exceeding 200mm thick complete all as specified and directed. |
| 26 | M&L for18 to 20mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite includinglaid over 15mm thick screed bed in CM (1:6)complete all as specified and directed. |
| 27 | Rounding to edges of stone slab one edge, such as steps, window cill stone, cooking platform, and other similar situations and rubbing and polishing complete all as specified and directed. |
| 28 | S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate,hold fasts etc. complete all as specified. The rates include for one shop coat of priming and filling PCC 1:3:6. complete all as specified and directed. |
| 29 | S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate, hold fasts etc. complete all as specified. The rates include for one shop coat of priming and filling PCC 1:3:6. complete all as specified and directed. |
| 30 | S&F Second class HW, plain, solid, straight chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed. |
| 31 | S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both sideand both facesis covered with approved pattern with Decorative colouredlaminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as specified and directed. |
| 32 | S&F Iind class HW, Hollow, 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, fitted with cut and mitred beads for securing glass etc, sizes of members shutters as specified in SSR Part I, selection 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed. |
| 33 | S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 34 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161of SSR (Part -II ) 2020 complete all as specified and directed. |
| 35 | Taking down old u/s steel window / ventilator andS & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including Two coat of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items. |
| 36 | Dismantling boarding of any description fixed with nails in any position and M&L18/19mm thick block board grade-.II quality, interior grade with decorative type with decorative face veneer on one face fixed complete, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works complete all as specified and directed. |
| 37 | S&F continous (Piano) hinges, mild steel, bright finish, width of flaps (when open) 30mm complete all as specified and directed. |
| 38 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed. |
| 39 | S&F 3mm thick sheet glass, ordinary quality,and glazing with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed. |
| 40 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 41 | S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge and anodised ISI marked and fixed, complete all as specified and directed. |
| 42 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 43 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 44 | S&F hasp & staple 100mm size safety type, aluminium anodised with mild steel hinges pin including bolt of hinge plate & fixed with screws complete all as specified and directed. |
| 45 | S&F 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed. |
| 46 | S&F 100mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 47 | S&F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified & directed. |
| 48 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of of brass,polished complete all as specified and directed. |
| 49 | S&F 300mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 50 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. |
| 51 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. |
| 52 | Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. |
| 53 | S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 54 | S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 55 | S&F 25mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 56 | Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 57 | Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 58 | Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 59 | Dismantling of existing unserviceable RCC/PVC water tankand S&F 1000 Litres capacity rotational moulded polythene water storage tanks(cylindrical vertical with closed top ) hoisted & fixed in position complete all as specified and directed. |
| 60 | S&F 20mmball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed. |
| 61 | S&F in repair tubular towel rail brass chromium plated20mm dia \"D\" type 60cm long between flanges complete all as specified and directed. |
| 62 | Supply and fixing in repair CP brass shower rose (4\"\" overhead ABS) with 225mm CP brass arm and flange (Prayag Cat No. BOS-87) complete all as specified and directed. |
| 63 | S&F in repair mirror of size 600 x 450 x 5.5 mm bevelled edge of selected quality PVC / aluminium moulded frames and back with fixing arrangement to wall complete all as specified and directed. |
| 64 | S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed. |
| 65 | S&F in repair wash hand basins vitreous china, white flat back size 450 x 300mm fixed including bracket, waste pipe and waste coupling complete all as specified and directed. |
| 66 | S&F in repair PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. |
| 67 | S&F in repair, 15mm bore Brass CP mixer for mixing hot & cold water for wash basin screwed down for iron pipe and fixed complete all as specified. |
| 68 | S&F in repairs 15mm bore cast copper alloy chromium plated fancy type bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 69 | S&F in repair fancy typeangle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 70 | S&F in repair 15mm bore stop valves (concealed) fancy type, chromium platedcast copper alloy,with long shank and cap screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed |
| 71 | S&F mild steel framed work such as grills, grating cooler stands, etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 72 | M&L providing 50x50mm aluminium anodised grills mesh for fixing in wooden gauged door shutter weight not less than 1.2Kg/ Sqm complete all as specified and directed. |
| 73 | Demolition of cement concrete of any description from sunken floor (ground or Ist floor) and removing and depositing materials exc 150 Mtrs but n. exc 250 Mtrs away complete all as specified and directed. |
| 74 | M&L for mass concrete filling using PCC (1:5:10) type E2 in sunken floor complete all as specified and directed. |
| 75 | M&L for rendering 15mm thick in CM 1:3 on fair faces of brick work, concrete surfaces as in sunken /roof treatmentfinished even and smooth withour using extra cement with and including applying two coats of acrylic polymer treatment as per manufacturer instructions (Make : CICOor equivalent ) compete all as specified and directed. |
| 76 | Taking out old u/s water closet and S&F vitreous China \"Orissa pattern\" size 580 x 440mm\" white, with intergral foot rests with vitreous china \"P\" or \"S\" trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed. |
| 77 | Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed. |
| 78 | Taking down 100mm / 75mm dia AC/PVC/CI pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories) |
| 79 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / newMS stack clamps ofFI 50 x 3mm complete all as specified and directed. |
| 80 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / newMS stack clamps ofFI 50 x 3mm complete all as specified and directed. |
| 81 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 82 | S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door complete all as specified and directed. |
| 83 | S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door complete all as specified and directed. |
| 84 | S&F in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed. |
| 85 | S&F in repairs PVC (SWR) gully trap 125/110mm, including fittings and jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed. |
| 86 | M&L cement concrete 1:2:4using 20mm graded aggregate as in surface channel and drain complete all as specified and directed. |
| 87 | Extra for fair finishes drain or channel 30cm and over in girth in cement concrete using extra cement including forming mounds metred /stopped ends etc complete all as specified and directed. |
| 88 | M&L 75mm thick cement concrete type D-2 1:4:8 (40mm graded stone aggregate ) as in floors / pavings complete all as specified and directed. |
| 89 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality including watering including 25mm thick sand filling of below the floor in foundation and vibrated with mechanical vibrator complete all as specified and directed. |
| 90 | M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed. |
| 91 | Demolition and bracking up drain pipe SWG line set in CM of description, 100mm dia including side packing / haunching complete all as specified and directed.` |
| 92 | M&L for PCC 1:3:6 type C-2 using 40mm graded aggregate for bed concrete to drain pipe packing under hunching for sides for 150mm dia SWG pipe lines complete all as specified and directed. |
| 93 | M&L for SWG drain pipe grade \"A\" 150mm dia laid in trenches incl jointing in CM 1:3 complete all as specified and directed. |
| 94 | Removing excavated materials n. exc 100m and depositing where directed and complete all as specified and directed. |
| 95 | M&L for preparation of newsteel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed. |
| 96 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 97 | M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm thick wall putty complete all as specified and directed. |
| 98 | M&L for preparation of new plastered surfaces of ceiling and applying three coats ofwhite wash complete all as specified and directed |
| 99 | M&L for newly plastered surfaces two coats of cement base paint over one coat of cement based primer on plastered/ concrete surfaces of walls including preparationof surfaces complete all as specified and directed. |
| 100 | S&F 1mm thick stainless steel kitchen sink with drainage boardwith plugs, washers and waste coupling and PVC waste pipeincludingfixing on half brick wall orcantilever brackets(angle iron )and connecting union overall size 915mm x 460mm,bowl size 410mm x 330mm x 160mm, fixed in repair complete all as specified and directed |
| 101 | S&F stainless steel plate rack made of 0.50mm thick of over all size920mm x 785 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed.. |
| 102 | Fabrication & fitting of cabinet / shelves & wardrobe / cupboard made out nof 18mm thick (one side decorative lamination & other side balancing lamination ) PVC sheet with piano hinges, with handles door shutters complete all as specified and directed. |
| 103 | Supply only 18mm thick (one side decorative lamination & other side balancing lamination sheet) solid PVC board of make : Rajshree or equivalent all as specified and approved by Accepting Officer with cement solvent adhesive for shutter / cup boards / partition wall / wall cabinet and similar work complete all as specified and directed. |
| 104 | Supply and fixing in repairs PVC cabinet of size 450 mm x 600 mm with mirror of good quality with shelves in bath fixed complete to walls complete all as directed. (Make : Prayag or eqvt). (Cat No. 555) |
| 105 | M&L for pre-cast RCC 1:2:4type B1 using 20mm graded stone aggregrate in cover slab for manhole or similar works set in CM 1:6 complete all as specified and directed. (Note :- reinforcement shall be measured and paid separately) |
| 106 | M&L for mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending for hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9mm dia or securing with clips conforming complete all as specified and directed. |
| 107 | Taking down existing tar felt or of any description including cement plaster or concrete of any thickness from the roof surfaces of building including cleaning the surfaces in all respect & preparing it for further treatment & removing rubbish from site complete all as specified and directed. |
| 108 | Material and labour for 40mm thick (avergae consolidated thickness) PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of \"V\" shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed. |
| 109 | M&L for rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3%by weight of cement on fair faces of RCC/stone patti roof surfaces finished even & smooth without using extra cement complete all as specified and directed (WPC will be measured and paid separately). |
| 110 | M&L roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 mircron high molecular high density polyethylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 mircron HMHDPE film weight not less than 2.60 kg/ Sqm applied with bonding material using blown type bitumen primer Grade 85/25 @ 1.20 Kg/Sqm over bitumen primer conforming to IS -3384 @ 0.40 Kg /Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg /Sqm over APP membrane with all overlaps complete all as specified and directed |
| 111 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed. |
| 112 | Disconnecting unserviceable sub main wiring/service connection of any size and including conduit of any type and accessories and removing from site and making good the disturbed surfaces. complete all as specified and directed. |
| 113 | Taking down MCB DB\"s complete with MCB\"s/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed. |
| 114 | M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for:- |
| 115 | One light point/bell point controlled by one, one way switch. |
| 116 | One ceiling fan/exhaust fan point controlled by one, one way switch. |
| 117 | One three pin 5 Amp socket on same board with other switches. |
| 118 | One 3 pin 5 Amp socket on independent board. |
| 119 | One light point controlled by two Nos two way switch. |
| 120 | All as per item No. 114.00 but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth complete all as specified and directed. |
| 121 | S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductorcomplete all as specified and directed. |
| 122 | S&F switch piano flush type 5 amps, single pole one way 240 volts. complete all as specified and directed. |
| 123 | S&F switch piano flush type 15 amps, single pole one way 240 volts. complete all as specified and directed. |
| 124 | S&F switch piano flush type 5 amps, single pole two way 240 volts. complete all as specified and directed. |
| 125 | S&F bell push piano flush type 5 Amp. complete all as specified and directed. |
| 126 | S&F Socket outlet 3 Pin 5/6 Amp flush type. complete all as specified and directed. |
| 127 | S&F socket out let 2 in 1, multipurpose 3 pin 15/16 Amp flush type ISI marked complete all as specified and directed. |
| 128 | S&F ceiling fan regulator suitable for BLDC fan 230 Volts AC complete all as specified and directed. |
| 129 | S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm. complete all as specified and directed. |
| 130 | S&F of door bell ding dong type electric 230 volts AC, single phase complete all as specified and directed. |
| 131 | S&F of lamp holder including 9W LED Bulb PVC/polycarbonate type with back plate complete all as specified and directed. |
| 132 | S&F LED tube light fitting in acrylic linear tube (1x 18 watt), 230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, bipin holders, LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make Bajaj, Havells, Crompton |
| 133 | S&F Wall mounted decorative luminaire fitting suitalble for LED lamp B-22 base 9 watt complete all as specified and directed. |
| 134 | S&F LED bulk head luminaire 1x 10 W bulk, IP 65 protection complete with all accessories and including connecting up with three core copper conductor cable complete all as specified and directed. |
| 135 | S&F testing and commissioning energy saving street light luminaire 35 watt LED, pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete with individual LED lences and complete all as specified and directed. |
| 136 | Supply and fixing street light bracket made of 32 mm Gl pipe, 1.2 mtr length fixed with two Nos of clamp, nut and bolts complete all as specified and directed. |
| 137 | Disconnecting and taking down existing electric meter and refixing the same after repair of electric meter, connecting, testing and sealing properly and making good disturbed surface of walls etc complete all as specified and directed. |
| 138 | Taking down existing ceiling fan, dismantling blades and refixing after cleaning incl conecting up with three core flexible cable from ceiling rose to fan complete all as specified and directed. |
| 139 | S&F of MCB distribution board single pole & neutral with 200 Amps rated E bus bar, double door IP-42 DB\"s, made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB\"s complete all as specified and directed.Note: MCB DB and MCB SP/SPN will be of same make. |
| 140 | S&F of MCB distribution board TPN 4 way, 415 volts, double door, with 200 Amps rated bus bar, neutral bar with shrouds, earth bar, IP-43 made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCBs as incomer and outgoing complete all as specified and directed.Note: MCB DB and MCB SP/SPN will be of same make. |
| 141 | S & F of MCB SP, 240 volt, 6 Amp to 30 Amp capacity, 10 KA, \"C\" curve complete all as specified and directed. |
| 142 | S & F of MCB SPN, 240 volt, 32 Amp capacity, 10 KA, \"C\" curve complete all as specified and directed. |
| 143 | S&F of MCB TPN, 415 volt, 63 Amp capacity, 10 KA, \"C\" curve complete all as specified and directed. |
| 144 | M&L for earthing complete with galvanised steel earth plate electrode Ea 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore Gl med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 incl dismantling of old unsv existing earthing complete all as specified and directed. |
| 145 | S&F storage type water heater (Geyser) electrical operated 230 volts including connecting inlet/outlet/vent pipes, electric/earth connections, mounting bolts, nuts and carrying out testing for proper functioning for geyser of capacity 25 Itrs complete all as specified and directed. |
| 146 | S&F exhaust Fans AC single phase 230/240 volts of size 300 mm sweep with louver including making space/holes in wall/window for installation of exhaust fan connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed. |
| 147 | Supply and fix vantilation fan, steel body AC single phase, 230V of size 250 mm sweep with louver including making space/holes in wall/window for installation of exhaust fan connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed. |
| 148 | Supply & fixing ceiling fan (BLDC) 1200 mm sweep, 230 Volts, AC, 50 Hz. copper winded motor, BEE 5 star rated white colour complete with motor, blade set of three nos, down rod, canopy, shackle assy complete all as specified and directed. |
| 149 | Supply and laying including jointing, testing or fixing or passing through pipe, trench or duct commissioning and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade size 25 sqmm, 4 core complete all as specified and directed. |
| 150 | Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed. |
| 151 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose/ hard/ dense soil complete all as specified and directed. |
| 152 | Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 153 | Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly complete all as specified and directed. |
| 154 | M & L for laying of bricks locally available sub class \"B\" bricks, modular sizes as per IS 1077: 1992 for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed. |
| 155 | Supply and fixing tubes light grade Gl tubing 40 mm dia with all fitting laid in trenches complete all as specified and directed. |
| 156 | Total in Figures |
| 157 | Quoted Amount in Words |
