|
| 1 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 2 | Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar incl all quons, arches, pillars etc but excluding ashlar facing dressed complete all as specified and directed. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 4 | M&L for Brickwork with subclass \"B\" bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 5 | M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed. |
| 6 | Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 7 | M&L for rendering 15 mm thick in CM 1:6 onbrick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surfacefinish even and smooth (w/o using extra cement) incl WPC as per user manual complete all as specified and directed.Note : WPC shall be measured & paid seprately. |
| 9 | Supply onlyinternal water Proofing compound complete all as specified and directed. |
| 10 | M&L for rendering 10mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. |
| 11 | Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each, complete all as specified and directed. |
| 12 | Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each, complete all as specified and directed. |
| 13 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm in double ribbetcomprising of virgin PVC polymer of K value 58-60(SuspensionGrade),calcium carbonate and natural fibers (wood powder/rise husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum frames density of 750 kg/cum ,screw withdrawal strength of 2200 N(face) & 1100 N (Edge),minimum compressivestrength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS Hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. M.S hold fast/lugs or SS Dash fasteners are included in this with this item complete. Note : Satinless steel butt hinges and necessary SS Screw shall be paid separately. |
| 14 | M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 59-60 (SuspensionGrade) ,calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity indexof 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge),minimum compressive strength 50 N/mm2,modulus of elasticity 850 N/mm2 and resistance to spread of flames of class A category with property of being termite /borer proof,water /moisture proof and fire retardant WPC to be laminated with PVC foil of minimum14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screw,all as per direction of Engineer-in-charge.Note : Satinless steel butt hinges and necessary SS Screw shall be paid separately. |
| 15 | S&F Factory made solid panel PVC wire gauge door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with. heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both Side Prelam PVC sheet used and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and direted by Engineer-in-Charge. |
| 16 | S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tubecomplete all as specified and directed. |
| 17 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and direted by Engineer-in-Charge. |
| 18 | S&F butt hinge, Stainless steel 100mm long complete all as specified and directed. |
| 19 | S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed complete all as specified and directed. |
| 20 | S&F Floor door stopper of aluminium alloy body double and tongue annodised with rubber shoe and fixed of size 150 mm complete all as specified and directed. |
| 21 | S&F Aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed complete all as specified and directed. |
| 22 | S&F extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and directed. |
| 23 | S & F in repairs 20mm wide door seal aluminium powder coated fixed with screws on bottom rails of door shutterscomplete all as specified and directed. |
| 24 | S&F Mild Steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete including taking down old one complete all as specified and directed. |
| 25 | S&F 2mm thick Fibre glass reinforced translucent corrugated / Plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed. |
| 26 | M&L for PVC (SWR) pipes, 100/110 mm bore,single socketed, in any length,with rubber ring joints, fixed to wall complete all as specified and directed. |
| 27 | M&L PCC1:2:4, type B1, (using 20mm graded stone aggregate) as in stagging for water tanks, inserting hold fast and filling Jamb etcand like including weathering slighly rounded or chamfered and where connecting slab and parapets etc angles throating complete all as specified and directed. |
| 28 | M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of oil bounddistemper over & incl. 1 mm thick wall care putty complete all as specified and directed. |
| 29 | M&L prepration of old decorated plastered surfaces of walls filling of holes with plaster of paris and applying one coat of oil bounddistemper complete all as specified and directed. |
| 30 | M&L for two coat of cement base paint on old decorated plastered surface of wall including complete removal of existing treatment & preparation of surfaces complete all as specified and directed. |
| 31 | M&L for applying one coat of cement base paint on old decorated plastered surfaces of wall including washing rubbing down stopping & preparation of surfaces complete all as specified and directed. |
| 32 | M&L for preparation of old painted surface of steel & iron work of any description not specifically mentioned otherwise over 10cm width or girth & applying one coat of synthetic enamal paint complete all as specified and directed. |
| 33 | M & L forpreparation of new plastered surfaces on ceilings and applying three coats of white wash complete all as specified and directed. |
| 34 | M&L for preparing old decoratedwall surfaces , filling of holes and cracks with lime putty or plaster of paris and applying one coat of white washon walls complete all as specified and directed. |
| 35 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) and disposal of debris complete all as specified and directed. |
| 36 | M&L for 15 mm thick, screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 37 | M&L for rendering, 10 mm thick, in cement mortar 1:4, on wall surafaces, as backing coat to tiles complete all as specified and directed. |
| 38 | M&L for premium quality coloured Non Skid Ceramictiles7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in whiteor coloured cement to match complete all as specified and directed. |
| 39 | M&L for premium quality coloured Glazed ceramic tiles, 300/350 x 450 x 7mm thick,on vertical surfaces such as skirting or dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 40 | M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint, complete all as specified and directed. |
| 41 | Dismantling of wall or ceiling boards ( fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets any thickness including cover fillets complete all as specified and directed. |
| 42 | M & L for 2nd class hard wood plain fillets square rectangular or triangular in section clean sawn and fixed with nails/screw or brads exc 13 and n.exc 25 sqcm complete all as specified and directed. |
| 43 | M&L for 18/19mm thick pre-laminated particle board , exterior grade , prelaminated both side with decorative choice laminationand other sidebalancing white laminationfixed with screwto timber framed work complete all as specified and directed. |
| 44 | S & F30 mm width of flaps Continuous (piano) hinges, mild steel, bright finish orelectrogalvanisedcomplete all as specified and directed. |
| 45 | S&F extruded aluminium alloy handle fabricated type anodised 100 mm long complete all as specified and directed. |
| 46 | M&L for preparing old decoratedwall surfaces , filling of holes and cracks with lime putty or plaster of paris and applying one coat of white washon walls complete all as specified and directed. |
| 47 | M&L for preparation of old painted surface of woodenwork of any description not specifically mentioned otherwise over 10cm width or girth & applying one coat of synthetic enamal paint complete all as specified and directed. |
| 48 | M&L for preparation of new woodensurfacesexceeding 10 cm width or girth and applying two coats of synthetic enamel paintoveronecoat of pinkprimer complete all as specified and directed. |
| 49 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 50 | S&F 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. if sheeting is welded to frame as required complete all as specified and directed. |
| 51 | M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 52 | M&L for preparing new plastered surfaces andapplying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering complete all as specified and directed. |
| 53 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over & incl. 15 mm thick screed bed or bedding layers in CM 1:6 and including rubbing and polishing complete all as specified and directed. |
| 54 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over & incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface , cement screed and jointed complete all as specified and directed. |
| 55 | M&L for obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work complete all as specified and directed. |
